WRVS4400N Firmware 1.1.03 problem

I recently updated my WRVS4400N firmware to 1.01.03. I use WPA-Personal with AES encryption security for my wireless laptops. I disabled Wireless SSID Broadcast and only allow my laptop MAC address to access my router. After I upgraded to 1.1.03 which is the latest firmware from Linksys.com. My wireless laptops drop session all the time. I rebuilt the client wireless profile did not help. Does anyone have the similar problem?
Brian

Yes, I reset several times and also reset it by holding the reset button at the back of the device several seconds without helping.

Similar Messages

WRVS4400N Firmware V1.1.03 QoS Problem

With this router, there seems to be a problem with the V1.1.03 firmware. I cannot save any of it's QoS/ CoS settings on any of the pages, from either a wireless OR wired device HTTP session.
If I try to create my own service in the bandwidth limitations, when I save settings, it defaults back to the first 2 or 3 entries in the services list. It's very annoying.
Is there a fix for this?

Allow me to demonstrate.
I add custom services.
I click "SAVE SETTINGS"
I get this result.
Maybe someone there could take 2 seconds to answer why the router would do this.... or maybe tell me why I cannot assign priority to ports... or do any QoS/CoS settings AT ALL?
Message Edited by JZulkeski on 02-24-2008 10:52 AM

WRVS4400N firmware upgrade to 1.01.03, VPN no longer works

I recently upgraded to firmware version 1.01.03 for my WRVS4400N. I have been having several problems with IPSec tunnels on the previous firmware and was hoping this release would resolve those issues. To my surprise this firmware version seems to be much much worse. Now I cannot even connect my point-to-point ipsec tunnels at all. I'm using the exact same configuration I was using before (yes I restored from factory and recreated). Anybody else have this problem with this new firmware? I've about had it with Linksys and their horrible VPN solutions. Any help would be appreciated.
Router 1: WRVS4400N
Router 2: WRV200
VPN Solution: IPSec
Thanks

We experienced the exact same problem with two of our new WRVS4400N's. We foolishly upgrade the firmware before realizing that the documentation for this significant release had not been upgraded. In the software business if the documentation isn['t done the software should never be released. Not only does it frustrate the customers but it also stresses the support organzation. Had we read the release notes we would have realized we should have 1.) backed up the settings (which would allow us to downgrade the firmware if we didn't like it - which is where we are now), 2.) reset the router to factory settings 3.) rebuild the settings from scratch. Once we finally got help from India to do this we were ok - though the VPN tunnell does go down at least once or twice a day. More frustrating though is our constant inability throughout the day to access websites (no problem pinging websites). Only way to resolve this is to reboot the router - again several times a day. We are now committed to downgrading back to the original firmware.

WRVS4400N Firmware upgrade fails

I've trying to upgrade the Firmware of WRVS4400N from 2.0.0.9 to the newest 2.0.1.3. Backup setting, upload the new firmware in the webinterface. Everything ok. Then I wait almost an hour, but the router did not reboot and reconnect to the webinterface. Instead, the router blinking on "Power" an "Diag". So i try to reset the router at the reset button backsides. But nothing happens, also these lamps blinking. Also I cannot connect to the webinterface. What's going on here? How can I solve this problem?
Regards Göran

The 126401-02 patch is for Netra T2000 machines.
If you have a regular T2000, use the 126399-02 firmware patch

WRVS4400N - Local Security Gateway Type - problems

Hi,
I've setup several VPN gateways and one Cisco gateway to our Juniper SSG140 with no issues, until today. We purchased a WRVS4400N and I'm trying to configure it to connect to our Juniper firewall, as a "dial-up" connection. I can get it to work if I set the "Local Security Gateway Type:" to "IP ONLY", but when I change it to "IP + Domain Name (FQDN) Authentication" it fails with the Cisco router not sending ANY IPSEC messages on the Cisco or Juniper, not even error messages. The last line of the VPN log says "Initiating Agressive Mode #1, connection" and nothing changes even after hitting the "Connect" button on the Cisco router.
The VPN router is Version 2, with firmware 2.0.8 loaded. Not sure if I have a bad Cisco wireless router, or this is by design.
Thanks for any help.
Keith

i suggest that you change the local ip address of the RVL200 to 192.168.2.1 instead of using 192.168.0.1. please check also the encryption and the security on both ends of the tunnel. make sure that you use the same encryption and same authentication. you may also want to start with low encryption and security to make sure that it is not the problem.

Linksys WRVS4400N Firmware Bug!

i have problem whit my Firmware. I can not open all order of FTPs and i can`t Upload on a FTP and this of all Computers. Test: Cute FTP FileZilla Client SmartFTP Whats this for a bug? Its WDS coiming soon on WRVS4400N?

since it seams like you are having an issue with your firmware , you can perform a factory reset by holding in the button in on back of the router for 30 seconds, wait about 2 minutes and try to upgrade to the latest firmware.
Below is a link to help you with the firmware upgrade.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4030&p_created=11601...
Good Luck,
Ttech

Latest firmware update and more problems with 30" external displays?

Hello,
New macbook pro user since a few weeks, so first post here.
I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
Is anyone else in a similar situation after the latest update?

Hello,
New macbook pro user since a few weeks, so first post here.
I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
Is anyone else in a similar situation after the latest update?

Upgrade kernel26-firmware to linux-firmware report with some problem

Just now I upgrade my system from kernel26-firmware to linux-firmware, in X (Awesome WM).
After press Y and pacman start downloading, I'm afk for a while (take a bath), when I'm come back
My system freeze and proses show that system still make mkinitcpio for fallback.
I hard reset, and boot. Boot failed in 10 seconds message because it can't detect my filesystem.
Follow suggestion that I need add some parameters I can boot.
Then I check with pacman -Syu, and you can guess there's still db.lck. Then I remove it, and invoke pacman -Syu again, pacman failed because there's already file from linux-firmware on disk.
I try to downgrade, but failed with the same reason. Then I remove all folder and file that conflict, and install kernel26-firmware then upgrade to linux-firmware, now I have linux-firmware on my system.
Learn a lot from that problem, any thought guys ?! Maybe some of you have a better way to solve something like that ?!
regards,
igndenok
Edit:
After I read pacman man, there's a force option (-f). Can I used that just in case (maybe) I have the same problem again ?
Last edited by igndenok (2010-06-21 15:11:27)

All I can say is that when the linux-firmware package got into [testing], I switched without problems on my laptop. I 'migrated' to the linux-firmware package on my server a few hours ago and it went smoothly too. I don't really think your problem has anything to do with the firmware package, since that doesn't trigger an initcpio rebuild, nor are there any file conflicts between both firmware packages.

Xpress Music 5800 new firmware (V51.0.006)problem

guy, i have this problem after updating my phone.
- my music player keep repeat song even i make repeat off
- hang when try to change radio station channel
those who have this problem and have the solve, hope can give me some advice. Thanks

/t5/Software-Updates/Nokia-5800-firmware-update-v51-0-006/td-p/738756

WRT54G v6 firmware upgrade under Vista problem

I'm not sure if this is related to Vista or not.
I downloaded the correct firmware version for WRT54G v6 and selected upgrade using the web interface. After a few minutes, the browser directed me to a site with the following URL
http://192.168.1.1/upgrade.tri
My IE7 had problem displaying this page and the Power LED on the router kept blinking. I tried to connect to the web interface and it was still showing Firmware Version: v1.00.9
I don't think there is anything wrong with what I did and not sure if the upgrade was successful. Any suggestions?

I had the same problem. I found the solution here http://www.scorpiontek.org/portal/content/view/27/36/1/3/:
This could be because you are accessing the router over HTTPS. You cannot upload firmware or settings to a WRT54G v5 over a HTTPS connection unless you have Linksys firmware v1.00.9 or later. Try accessing it using just plain HTTP.
Enabling and using http instead of https worked for me. No need to reset or reconfigure.
I upgraded from 1.00.1 (IIRC) to 1.02.2.

Firmware version explanation + sleep problem

My 10 days old iMac baby has problems to sleep. It goes to sleep but after 5-6 minutes it's awaken again. I tried everything I found relevant to this problem on this discussion board but no help at all. Mac baby was born with 10.4.8 and now it's at 10.4.10 - combo update, everything else is working perfectly well except this sleeping problem. I
After all, I went on Apple download in order to check if there are some EFI Firmware updates and now I'm more than confused with numbers.'
On Apple's site it's clearly written that the most recent firmware version for my iMac is "IM51.0090.B03 (20-inch late 2006)" http://www.apple.com/support/downloads/imacefifirmwareupdate11.html but my System Profiler shows higher number count: "IM51.0090.B08".
From System Profiler:
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B08
SMC Version: 1.9f4
Does anybody has any idea about this?
Tnx,
Denis
iMac 20'' (Late 2006) Mac OS X (10.4.10) 2 Gb Crucial DDR2 RAM @ 667 MHZ, WD My Book Premium Edition 250 GB

Others have also found what appears to be a discrepancy in the firmware that System Profiler reports installed on their Mac versus the version reported in Apple Knowledge Base documents. The definitive document for me is Mac OS X: Firmware Updates for Intel-based Macs. This doc confirms the information that you report, so the logical explanation to me is that, although the doc was last updated by Apple on 1 MAY 2007, there has been an update to installed firmware in Macs shipping since the doc was last updated.
But the firmware shouldn't have anything to do with whether your Mac sleeps or not. Sleep is one of the things regulated by the System Management Controller. This can be reset.
But there are many other things that can interrupt the Mac auto-sleeping; external FW/USB peripheral devices, wifi, Bluetooth, etc. Have you added any such devices recently.

Re: firmware 7.2.x problems

In the past week I posted a couple of questions about the problems I was experiencing with my AEBS and Internet connection. I didn't get an answer. However after scanning through some related posts after my post,I found an answer to my problem. Other people are experiencing the same problem with the new firmware update. A few posts recommended replacing the new firmware with the older "working" firmware of 7.1.1. I did that and it worked.
To replace the firmware (or return to the older version), you have two options: 1. Go to Airport Utility>Manual>Summary and position your cursor over version (see plus sign) and click. You get a menu listing previous versions on the base station. Select the one that worked. OR 2. Go to Airport Utility and option-click the Airport Utility menu, scroll down to update, and you'll see a window open listing firmware versions. Check the desired firmware, make sure to uncheck other firmware boxes, and click Update. You "should" be back on the Internet (and Airport Utility "sees" your base station). If I omitted any steps, you can go to http://docs.info.apple.com/article.html?artnum=305301
It took some time to solve this but if you persist and continue to review this forum you will find a solution (although I would have preferred an instant solution). I wish to thank all of you who have posted your problems and those who provided solutions and work-arounds. The forum may not work as fast as one might prefer, but it still delivers the answer. Thanks again!
And will Apple do something about this, such as update the firmware again?
Rob

There's already a long thread started called "Firmware update 7.2.1" regarding customer issues after the update. Currently the only solution seems to be to downgrade the firmware to the previous release until Apple releases another update.
Ensure to send your bug report regarding any issues experienced after updating the AEBS firmware 7.2.1 to http://www.apple.com/feedback/airportextreme.html and select bug from the drop down list.

Firmware 1.1.1 problems

I have upgraded to 1.1.1 from 1.02 firmware about 10 days ago, and in those ten days i have observed following problems.
1.Battery life is significantly reduced, now i charge it everyday as compared to every other day with 1.02
2.Phone becomes hot even after 5 min talk time
3.ATT reception has gone down significantly, it would not receive a service in spots where it used to have it with 1.02 and once it goes into no service message, sometime it would not automatically go to service mode , you would rather have to restart the phone.
I had a very good working phone prior to this 1.1.1 release, I never had volume, battery or reception problems as mentioned in this forum by some memebers.
I am wondering if i could go back to 1.02, I never modified my firmware.
Is there a way to downgrade?

Gotta say--I have the same problems after upgrading--the phone that used to go 2-3 days between charges now won't make it 8 hrs! And the brand new loaner phone I got from Apple does the same thing! The loaner was preloaded with "1.1.1 (3A109a)". My iPhone has gone from being the joy of my life (well, sort'a) to being pretty much unusable. Apple better take care of this!
It is clear that something is now running in the background, heating up the phone and killing the battery--also causing some intermintent screen freeze-ups when in "Settings".
NOT A HAPPY CAMPER!

Ipod 1.1.1 firmware - 1.1.2 problems? is 1.1.3 out?

Hiya
and good morning everyone:
My question (and I did a quick search for previous posts):
I am currently on firmware 1.1.1 for ipod "classic" 160 gb with current iTunes Version 8.0.1.
On two previous occasions, I updated to 1.1.2 which caused endless issues with the ipod; done the hard factory reset etc.
Does anyone know, is there a firmware 1.1.3 out (or higher?) and if so, has
a) anyone had problems?
b) and do I need to update to 1.1.2 first?
T.v.m.

Is there possibly a way to go backwards? I have been having a lot of problems with my 160 GB classic, and someone suggested that I deny the update to 1.1.2 while restoring my ipod through itunes, but it doesn't offer me the chance. It always just seems to update to 1.1.2. Is there a way to download 1.1.1 as a standalone? Or maybe someone can explain why restore isn't giving me the option of denying 1.1.2. Any help is greatly appreciated.

3.1 firmware and nothing but problems

Since upgrading firmware to 3.1 i am having nothing but problems, battery life is now very poor and also it is taking 10 hours to charge phone from 0-100%. I am getting dropped calls and also call failed and hardly any 3g coverage at all even though i live in a big city. Is anyone else having the same problems and is 10 hours a long time to recharge an iphone?

Look at the recent posts and you'll see others are having similar problems. I suggest you restore as new, not from a backup and see how it runs when factory fresh, without any third party apps.

WRVS4400N Firmware 1.1.03 problem

Similar Messages

Maybe you are looking for