WRVS4400N FTP Server Time-out Issue

I recently installed a Linksys WRVS4400N wireless router. After installing it, I began to experience an FTP connectivity issue. (I use Macromedia Dreamweaver to do my web site file transfers.) Although I can connect to my web servers and log in successfully, as soon as I attempt to transfer any files to the sites, I get a "Waiting for server..." error, and then eventually I lose the connection.
I tried disabling the firewall and IPS functions of the router, but that did not solve the problem. I then uninstalled the WRVS4400N and reinstalled my old Symantec Firewall Appliance 100, and FTP file transfers worked fine, as they had before. I then reinstalled the Linksys router, and the problem returned.
Obviously, the Lynksys device is causing this problem, but I can't figure why. Any suggestions would be appreciated.

Similar issue resolved this AM. When I called they already knew of the issue and I read some posts about updating to a beta firmware HOWEVER, they first instructed me to 1) re-download the firmware (encase of prior corrupted download) 2) backup my Settings 3) reflash the firmware 4) try FTP (which worked) 5) restore settings I was extremely dubious about this working, but low and behold, Filezilla is back up and running properly. I am rather surprised myself. Else just call, they already know of the issue.

Similar Messages

FTP Connection Time-Out Issue

*THE PROBLEM:* OS X specific FTP clients time-out intermittently when I try to upload files to any given server directory.
*TROUBLESHOOTING FAILURES:*
* Tried uploading the files to the same directory using different FTP clients (listed below).
* Tried using another Mac in the same office with the same client to upload the same files to the same directory at the same time and different times.
* Tried plugging in with an actual network cable cable.
* Tried toggling on/off passive mode both in the FTP clients and the OSX system preferences.
* Tried using the Binary (RAW DATA) upload format.
* Tried recreating the FTP profiles for the connections.
*TROUBLESHOOTING SUCCESS:*
* Tried uploading the same files to the same directory at a different location
* Tried uploading using filezilla in a Windows XP Pro virtual machine in my otherwise problematic work location.
I'm a web-designer. So FTP is a major part of my work-flow. My connection follows this setup:
My office is somewhat remote so my local ISP uses a Microwave transmitter (line-of-site) to make connection with a receiver at my home, which in-turn is plugged into a little wireless router. I connect to the wireless router with my Airport card in my MacBook Pro.
I use a number of applications that are standalone or have integrated FTP clients including:
* Fetch
* Interarchy
* Cyberduck
* CODA (AND)
* Dreamweaver
Can anyone offer me any explanation why my FTP has these problems.

Have you tried turning off the Firewall yet?
Since you have Fetch, let's try the transcipt messages as ScottMcGuire puts it...
http://fetchsoftworks.com/ubb/Forum2/HTML/003844.html
I use TransmitX, see if it has the same problem...
http://www.panic.com/transmit/
Are the ping times on the PC & Mac much different? What are they?

Server time-out issue - unable to start "hello - world" application

Hi Team,
I am doing the exercise of week 1 of "Intro to SAP HANA Cloud platform (Repeat) " -
I am unable to start the application - I get the server time out error - also I tried increasing the timeout in server editor to 600 - I still
get the error as shown below
Please help me in resolving this.
Thanks in advance!
-Manju

1. I meant look for any errors in the logs, for something related to your app.
2. Just go to Java Applications in Cockpit. BTW, do you know the help center SAP HANA Cloud Documentation? That should be your first stop for any questions around HCP along with the SAP HANA Cloud Platform Developer Center and http://hcp.sap.com/.
3. There should be more details in that log file about the reason the app could not start.
HTH!
--Vlado

SSIS FTP connection Time out issue

Hi,
I have a package about 300MB downloading from a client's FTP out side of company,it was working for about 1 year , now I got time out error after 60% downloading.
I can manually download the package thru IE , so I guess it's NOT the connection issue. When I check the FTP connection , I noticed an interesting thing :
1> Time out range is 1-300, and 0 should mean NO TIME OUT , however, it seem whatever number I saved for TIme out , it's back to 60 sec (Default value) --I tried both on VS 2008 R2 and VS 2012
2> Package will be timed out after 5-6 minutes after the package start running
3> Error message is :
Connection manager "FTP Connection Manager" Description: An error occurred in the requested FTP operation. Detailed error description: Receiving file "XXX.zip". The operation timed out . End Error
Error: 2014-05-16 14:29:26.34 Code: 0xC002918A Source: Download zip file from PV FTP FTP Task Description: Unable to receive files using "FTP Connection Manager". End Error
Had anyone seen this error before ? Any one tried to set the time out as 0 with succeed ?
Thank you all in advance !
-Eva
EW

Hi Eva,
It may occur due to the Firewall blocking. Please add Inbound and Outbound rules for Port 21, and program DtsDebugHost.exe and DTExec.exe.
As a workaround, you can use FTP batch file instead of the SSIS FTP Task:
http://www.dostips.com/DtTipsFtpBatchScript.php
http://www.robvanderwoude.com/ftp.php
Regards,
Mike Yin
TechNet Community Support

Connection to server times out

Hi, I know I've seen somewhere that you can set how long before your connection to your remote server times out in DW. After a few minutes of editing files, and then when I go to upload them to my host, It takes forever just to make a connection. I used CS3 for a while, then upgraded to CS5. CS3 didnt seem to have this issue.
Another issue I seem to have is when I DO put files to my remote, sometimes the files dont seem to reflect changes I made. For instance, I added an id attribute to a firm field, uploaded my file to the remote, hard refreshed my browser viewing the same page and viewed source. The form field id was not there! So I clicked the expand local and remote files button and pulled the file over to the remote manually!
Maybe these are issues with my hosting company? Anything I can do to ensure my remote connection stays connected, at least for an extended period of time if not indefinately. Thanks in advance!

Hi Nancy, thats for the tips and info. I've tried most of what you suggested. One thing I never thought about though was toggling passive mode on and off. For some reason I just always assumed this should be on by default. So I will try that and see how it goes over the next day or so.
Also the FTP optimize performance was checked. Seems like I had an issue with this a while back, so I unchecked it as well.
Now the other issue of why updated files arent showing up on my remote. Yes I always use ctrl+F5 to refresh my browser. Again, this morning when I did that very thing, and then viewed source, the updated code was not there. The code I am referring to was about 20 lines of javascript that was showing in dw code view, but not in ff source view. So not sure about that one. As you said its possibly my host provider. Thanks again!

How to avoid Time out issues in Datapump?

Hi All,
Iam loading one of our schema from stage to test server using datapump expdp and impdp.Its size is around 332GB.
My Oracle server instance is on unix server rwlq52l1 and iam connecting to oracle from my client instance(rwxq04l1).
iam running the expdp and impdp command from Oracle client using the below commands.
expdp pa_venky/********@qdssih30 schemas=EVPO directory=PA_IMPORT_DUMP dumpfile=EVPO_Test.dmp CONTENT=all include=table
impdp pa_venky/********@qdsrih30 schemas=EVPO directory=PA_IMPORT_DUMP dumpfile=EVPO_Test.dmp CONTENT=all include=table table_exists_action=replace
Here export is completed and import is struck at below index building.After some time iam seeing below time out in log files
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX.
Error:-
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Unix Domain Socket IPC NT Protocol Adaptor for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 13-JAN-2012 12:34:31
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=170.217.82.86)(PORT=65069))
The above ip address is my unix client system(rwxq04l1) ip.
How to see oracle client system port number?
Please suggest me how to avoid this time out issues.Seems this time out is between oracle server and client.
Thanks,
Venkat Vadlamudi.

Don't run from the client ... run from the server
or
if running from a client use the built-in DBMS_DATAPUMP package's API.
http://www.morganslibrary.org/reference/pkgs/dbms_datapump.html

SOAP ADAPTER TIME OUT ISSUE

We are getting the data from sql server into PI through Soap adapter.
Till day before yesterday everything is running fine .But now it has started giving us the below error.
there were no changes done in the interface.
I am not able to see any error in the runtime workbench ,communication channel monitoring, message monitoring.
This below error is giving in sql server.
Can any PI expert explain or provide me a solution to solve this issue.
Msg 6522, Level 16, State 1, Procedure sp_PI_WS_Backflush_Production_V2, Line 0
A .NET Framework error occurred during execution of user-defined routine or aggregate "sp_PI_WS_Backflush_Production_V2":
System.Net.WebException: The operation has timed out
System.Net.WebException:
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at PI_WS_Backflush_Production_V2.Backflush_OB_Sync_SIService.Backflush_OB_Sync_SI(BackflushRequest_DT BackflushRequest_MT)
   at PI_WS_Backflush_Production_V2.StoredProcedures.Backflush_Production_V2(String PalletNumber, String StockKeepingUnit, String ProductionPlant, String BatchNumber, DateTime ProductionDate, String Quantity, String UnitOfMeasure, String Destination, String& uState, String SAPUser, String SAPPassword)

Time out issue could be due to the long running process in your SQL server. please check the SQL server for its performance and also check the number of http worker threads on the SQL server side where the SOAP adapter makes the call and get the request back.

BPC Optimization Server Time Out error message

We’re using BPC 7.5 MS and on patch level 111.02
There’s two front-end servers and one back-end.
When completing a full optimization with compression on an application we immediately get the optimization popup screen with no processing information only a “Server Time Out” error message.
Optimization was taking a long to time run and sometimes timed out. To try and resolve this issue we have just updated indexes and statistics and during our test in production we now receive the “Server Time Out” error message immediately. However, the records from tbl.Factwb and tbl.Fac2 did move to the tbl.Fact.
Our development environment test ran fine.
Any suggestions?
Thanks.

Hi Michael,
please look in the logs maybe you will found more informations regarding the timeout and eventually share it.
There are several notes about a timeout in 10 version,
1394533 - 'Server Time Out' error when performing Modify Application, Full Process of a dimension, or Full Optimize this is related with NLB
but it could be also related with the web.config 1628908 - How to fix Optimize with compress time-out failure
or if you reach the max number of connection
1635749 - Error Message: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool
Regards
Roberto

Server time out by full Optimize application process

Hello,
we have problem with full optimize application processing. We have got error message "Server time out" on the Processing OLAP Database.
our test environment on the VM x64bit, Server 2008
Please anybody helps me to solve this issue.
P.S. other optimize processes are workable (lite and Incremental)
Thanks
Arai

Hi,
Please see Note 1277009.
This might resolve your issue.
Karthik AJ

Please Help --Export to excel time out issue

500 Connection timed out
Hi Friends,
We have a query which runs about 3 minutes on web and brings bach 54000 rows , but when the user tries to export to excel It give timeout error as below.
Connection timed out (-5)
Error: -5
Version: 6020
Component: ICM
Module: icxxthr_mt.c
Line: 2467
Server: tepas0_abc_00
Detail: Connection to partner timed out
Please help me out.
Thanks a lot!

Hi,
Check the info here:
https://forums.sdn.sap.com/click.jspa?searchID=5203764&messageID=959490
There are also a lot of other threads on time out issue...
Hope this helps...

SMS 2008 Server time out same time every hour

Our server times out at the same time every hour. Any computer connected to our network at exactly xx:53, any program or anything you are attempted to do goes to the loading circle and says not responding. It stays that way until xx:54. Every hour, every
day. However, nothing shows up on the error reports.

Hi MNQWolfe,
Based on your description, I suggest that you should firstly check if there any program or feature (such as antivirus program, update, backup and so on) started
working at that time. Also, please monitor the Task Manager or Resource Monitor to check if any process was started at that time.
In addition, it seems to be a network issue. Please run a sniffer on the server. You can use Microsoft Network Monitor 3.4 to monitor and then check ARP messages
and so on.
Microsoft Network Monitor 3.4
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=4865
Hope this helps.
Best regards,
Justin Gu

Outgoing server times out - can't send any emails and don't know what to do

I receive emails just fine in my MobileMe account but when I try to send them they get stuck in outbox ****. It is an IMAP account and I have tried the connection doctor - which shows the server times out - as does the message box that pops up. I have a Genius Bar appointment for tomorrow but this is driving me crazy. Any insight would be much appreciated!

I had this occur several times before, some time ago & wish I wrote down the fix. I too am experiencing the same issue for the last 2 days; so my guess is it must not be my computer since nothing has been changed except I did a "sync" & that is the only thing different in the last few days.

Edge Animate causing Server Time Out Error and other problems

Site is not verifying due to Server Time Out error. Also menu which was created with Adobe Edge Animate does not show up as navigation in a site map or when bots read the site. Site won't verify or index in google.
Suggestions on how to fix this would be helpful and appreciated.
This is the website address. please type in Without any spaces:
louis place cafe DOT com DOT au

Site is not verifying due to Server Time Out error. Also menu which was created with Adobe Edge Animate does not show up as navigation in a site map or when bots read the site. Site won't verify or index in google.
Suggestions on how to fix this would be helpful and appreciated.
This is the website address. please type in Without any spaces:
louis place cafe DOT com DOT au

Time out issues

I have a program which will retrieve the accounting information, the result as like as T-code F.19, but when i execute the program it will caused time out issue, I have not idea how to solve it. Could you help. Here is the source code which cause time out. Thank!
   select * from bsis
      into corresponding FIELDS OF table it_bsis
      where bukrs in so_bukrs and
            budat in so_budat and
            augdt = '00000000' and
            dmbtr ne 0.
    loop at it_bsis.
      select single * from bseg
         where bukrs = it_bsis-bukrs and
               belnr = it_bsis-belnr and
               gjahr = it_bsis-gjahr and
               buzei = it_bsis-buzei and
               ebeln in so_ebeln and
               matnr in so_matnr and
               hkont in so_hkont.
      if sy-subrc = 0.
          MOVE-CORRESPONDING BSEG TO BSIS_TAB.
          BSIS_TAB-WAERS = it_bsis-WAERS.
          BSIS_TAB-BUDAT = it_bsis-BUDAT.
          BSIS_TAB-BLART = it_bsis-BLART.
          IF it_BSIS-SHKZG = 'H'.
            BSIS_TAB-DMBTR = 0 - BSEG-DMBTR.
            BSIS_TAB-DMBE2 = 0 - BSEG-DMBE2.
            BSIS_TAB-DMBE3 = 0 - BSEG-DMBE3.
            BSIS_TAB-WRBTR = 0 - BSEG-WRBTR.
          ENDIF.
          APPEND BSIS_TAB.
      endif.
    endloop.

Avoid selecting BSEG within the it_bsis loop. BSIS will have huge data and when you do data selection for BSEG inside this loop things will only worsen.
My points:
BSIS:
1. Avoid 'INTO CORESSPONDING FIELDS OF" during the bsis table fetch. Instead define your target structure with the required fields and select only those fields from the BSIS table.
2. Make sure that only "Key fields" are used in your filter (where condition) for this BSIS table fetch.
3. I presume your company code in selection (so_bukrs) is a mandatory field. If not suggest for mandatory option.
BSEG:
To avoid selection of BSEG inside the bsis loop do the following.
1. Sort it_bsis by bukrs belnr gjahr buzei.
2. Move the contents of it_bsis into a temporary table of same structure, say it_bsis_tmp.
3. delete adjacent duplicates from it_bsis_tmp comparing bukrs belnr gjahr buzei.
4. Now use the below selection:
   select <fields required from bseg>
     from bseg
     into table it_bseg
     for all entries in it_bsis_tmp
where bukrs = it_bsis_tmp-bukrs and
belnr = it_bsis_tmp-belnr and
gjahr = it_bsis_tmp-gjahr and
buzei = it_bsis_tmp-buzei and
ebeln in so_ebeln and
matnr in so_matnr and
hkont in so_hkont.
if sy-subrc eq 0.
sort it_bseg by bukrs belnr gjahr buzei.
endif.
5. Modify your loop construct as below:
loop at it_bsis.
read table it_bseg into wa_bseg with key bukrs = it_bsis-bukrs
                                                              belnr = it_bsis-belnr
                                                              gjahr = it_bsis-gjahr
                                                              buzei = it_bsis-buzei
                                                              binary search transporting <required fields>.
if sy-subrc eq 0.
   move the required fields from wa_bseg to your BSIS_TAB.
BSIS_TAB-WAERS = it_bsis-WAERS.
BSIS_TAB-BUDAT = it_bsis-BUDAT.
BSIS_TAB-BLART = it_bsis-BLART.
IF it_BSIS-SHKZG = 'H'.
BSIS_TAB-DMBTR = wa_BSEG-DMBTR * -1.
BSIS_TAB-DMBE2 = wa_BSEG-DMBE2 * -1.
BSIS_TAB-DMBE3 = wa_BSEG-DMBE3 * -1.
BSIS_TAB-WRBTR = wa_BSEG-WRBTR * -1.
ENDIF.
APPEND BSIS_TAB.
endif.
endloop.

Email stuck in Outbox - Server times out

I sent an email with an attached pdf - should have checked the size of the pdf first. After about 5 to 10 minutes I get a Server Time out error. I closed and opened the email program and it tries to send the email again.... How can I delete the email with out opening the program?
Thanks in advance. Dale
G3 Mac OS X (10.3.9)

Dale,
Welcome to the Discussions.
Quit Mail, if running. In the Finder, open Home/Library/Mail/Mailboxes and locate the Outbox.mbox file, and delete it. Mail will create a new one, when next you go to send.
Are there any messages in the Outbox you wish to save? If so, don't delete, but only drag out to be on the Desktop, and post back.
Ernie

WRVS4400N FTP Server Time-out Issue

Similar Messages

Maybe you are looking for