WRVS4400N needs to be rebooted every 24 hours

I have the latest firmware and I have reset to factory defaults but I still need to reboot the router every 24 hours. Can anyone help?

Useful info.. Is it possible to change the MTU size on the WRVS4400N? I rolled back from 1.01.03 to firmware 1.00.16 to see if it makes a difference, however I don't see any MTU settings. It's possible there are MTU settings in 1.01.03. There is major difference in the web admin screen between the two. 1.01.03 introduces a more detailed way of seeing what's connected to the WRVS4400N as well as handling Diffserv instead of just ToS/CoS. There are a few other things to..
Anyway, if 1.00.16 doesn't resolve my issue then I'll jump back to 1.01.03 and see if there are MTU settings. BTW, I just disabled UPnP after reading your message. Hopefully that helps too.
The odd ting is, I have a Buffalo Wiress N router and never had a single issue. I got the Linksys for my "lab" environment where I'm doing a lot of VoIP testing. The other Linksys products (PoE switches, WET200 wireless bridge, SPA-9000 and SPA phones) all work great. The router is the only one giving me odd behaviour.
Thanks,
-d
EDIT: It looks like I found the MTU. It's not labeled MTU though. On the "L2Switch" tab there is a selection for "Port Settings" and there is a default entry for "MaxFrame" of 1518. If my hosts get locked up from the Internet again, I'll change the MaxFrame to your suggested size. Since I just rolled back to 1.00.16 I want to see if the issue occurs before making the MaxFrame change.
Message Edited by dfusion on 01-27-2008 08:25 AM

Similar Messages

My iMac needs to be rebooted every time I put it to sleep

My iMac needs to be rebooted almost every time when I wake it from sleeping. Is this normal? Ether the screen darkens and it will tell me to reboot by holding down the power button or the screen is just totally blank. It's been doing it for a long time and I thought it was just mac security updates running in the backgrownd or something but it seems to be getting worse.
Thanks

Do this:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.

WRT350N Rebooting every hour.

Hey All,
I bought my WRT350N back in January from Best Buy.
I haven't had a single problem from it until recently. I very much love this router...but I upgraded the firmware..and my life is now hell. Every 30 to 60 minutes the router reboots. Also...where it used to send out 54mbps to my wife's laptop..I'm lucky to get 24 out of it. Anyone have any ideas?
Tomcat

I'm having the same issue as the OP. I updated to the latest firmware Firmware Version: v1.03.7 on my WRT350N
And now the router reboots at random about once an hour to hour and a half.
up till now it's ran perfect for just over a year.

Airport suddenly needs to be rebooted every day

I have a client with an AirPort Extreme. He has been using it for several
years without a problem. Suddenly EVERY day (definitely when he wakes up in
the morning and sometimes at other points in the day - as far as I can tell
when the computer is idle) the status light blinks yellow.
When this happens he looses the wireless connection. If I plug an ethernet
cable into the AirPort it shows up under the AirPort Admin Utility, but is
unable to read the configuration to determine what the AP is unhappy about.
A simple power cycle fixes the problem.
I first thought it might be a problem with the AP so I replaced it with a
new one (having the latest firmware).
Same problem.
I have since replaced all ethernet cables and the Time Warner Road Runner
cable modem. Same problem.
I even tried a LinkSys router in front of the AP and put the AP in bridge
mode, but no joy.
A few other points:
If I sleep the MacBook I CAN NOT get the problem to happen (I am only
waiting max 10 min)
We "coincidentally" replaced his 3 year old MacBook with a new one (with OS
10.61) a few days before this problem started. I cant see how this could be
the problem as it happens when the computer is sleeping and the fix is to
reboot the AP not the computer, but the timing is awfully suspicious.
I dont know what else to try. Any ideas?
Thanks

If both devices are producing a wireless network, there is an increased chance of wireless interference between them, especiallyi if they are located in the same room. If you normally only one use one wireless network, it would make sense to turn the other one off.

8330 Curve reboots every hour or so

Recently had a problem with my phone spitting out error msgs (related to untrusted certificates while trying to go to a website). Long/short of it was the phone got wiped. I've put it back to normal as much as I can (new Service Books, restored the Address book from a backup, etc) but the foolish thing keeps rebooting (shuts down, red light while attached to nothing, then hourglass while it comes back up).
The phone is just over 2 years old w original battery, if that helps.
Thanks in advance for attempting to help.

ironic thing, the loaner nokia gave me to use while i wait for a red worked great except for the black screen during calls.
I just can't get a working red. Sad because i have a mobile sharing plan with 6 people on it, 5 have 920s and 3 of the five have been defective. One didn't work out the box and the other bricked after wireless charge. The third is mine that had battery drain issues and my replacment has battery drain and rebooting issues. So my family 4 phones that are defective. That is not a good %%

My airport express needs to be rebooted every day, what's wrong?

Does the fact that I have a router and the airport express cause some redundancy?

If both devices are producing a wireless network, there is an increased chance of wireless interference between them, especiallyi if they are located in the same room. If you normally only one use one wireless network, it would make sense to turn the other one off.

Linksys WRT54GS Ver 5 needs reboot every 10-12 hours after wiring it to LG BD590 Blu-Ray

Had this router hard wired to a desktop - everything has been fine forever. Moved it so I could hard wire it to the Blu-Ray player for watching Netflix, etc. Everything works. Except the Router needs to be rebooted every 10-12 hours. Unplugging it for 30 seconds works. The router seems to be working, but the wireless signal to the other computers in the house, although showing strong, will not connect to the internet, Router is getting its internet straight from the Comcast modem. I have the latest firmware installed in the router. Any ideas greatly appreciated before I throw this thing out.

Try to re-flash the firmware on your router.
Connect the computer with the Ethernet cable to the router.
Download the latest firmware from Linksys website and save it on your computer. Open the setup page of the router. Click on Administration tab and go to Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and upgrade it on your router.
After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.
Also try to change some advanced wireless settings on the router. Click on Wireless tab and go to Advanced wireless settings. Change the Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.

EA6500 reboots every few hours

Hi, I got my new comcast connection and using CISCO DPC3008 cable modem and EA6500 Wifi Smart Router. Internet works fine and then suddently the internet goes away. Further investigation shows EA6500 Wifi router just reboots every few hours and then wifi devices don't reconnect like it used to do with previous routers.
Any idea what is wrong? Have the latest firmware. Reset multiple times.

Hi,
Is there a specific time when the router reboots? This performance seems weird and there's no way for most of us - the end users to check what causes the reboot. Anyways, you can try to set static channels on both 2.4Ghz and 5 Ghz bands. For the 2.4Ghz - set it to channel 9 - 2.452 Ghz and for the 5Ghz band, set it to 153 - 5.765 Ghz.
This is based from an observation on my friend's N450 Belkin Router - got so curious of it's "self healing" feature. Based on observation, self healing will just re-initialize the router based on the specific time that had been set and it will cycle through other available wireless channel. So, to avoid re-initialization, we can try setting a static wireless channel on EA6500.
If everyone needs to believe in something, I believe I'll have another beer..

Rebooting every 4 hours

Mac Mini w/ Mavericks reboots every four hours like clockwork. We've reset SMC, unplugged backups, turned off Time Machine, checked for /etc/periodical maint. scripts.
Log files point to shutdown reason 5. We can't find what that means anywhere.
What would cause a machine to reboot like this?

I saw a similar unexplained reboot today on my MacBook Pro (10,1) running 10.9.3.
I found:
6/19/14 9:28:54.345 AM shutdown[755]: reboot by _atsserver:
It is possible that there is a shared API call in the atsserver and trustevaluationagent services which can initiate a failsafe reboot. This indicates that the atsserver and the trustevaluationagent services are not necessarily responsible for the reboot behavior.
I recommend registering as an Apple Developer (its free) and posting a bug at bugreport.apple.com. Include more console context, particularly earlier than you have above.
In my case, symptoms of system instability can be seen earlier in my console log:
6/19/14 9:28:53.704 AM com.apple.launchd[1]: (com.apple.WebKit.WebContent.95D7B71D-0E8F-4791-B594-9C1E4CA0A4E9[597]) Could not terminate job: 3: No such process
6/19/14 9:28:53.704 AM com.apple.launchd[1]: (com.apple.WebKit.WebContent.95D7B71D-0E8F-4791-B594-9C1E4CA0A4E9[597]) Using fallback option to terminate job...
6/19/14 9:28:53.704 AM com.apple.launchd[1]: (com.apple.WebKit.WebContent.5C065871-7058-470C-AD63-DD6C77FBB4BA[408]) Could not terminate job: 3: No such process
6/19/14 9:28:53.704 AM com.apple.launchd[1]: (com.apple.WebKit.WebContent.5C065871-7058-470C-AD63-DD6C77FBB4BA[408]) Using fallback option to terminate job...
6/19/14 9:28:53.704 AM com.apple.launchd[1]: (com.apple.WebKit.WebContent.45AF1C62-AB32-46D8-8056-4BD5B5E2F4A3[407]) Could not terminate job: 3: No such process
6/19/14 9:28:53.704 AM com.apple.launchd[1]: (com.apple.WebKit.WebContent.45AF1C62-AB32-46D8-8056-4BD5B5E2F4A3[407]) Using fallback option to terminate job...
6/19/14 9:28:53.704 AM com.apple.launchd[1]: (com.apple.WebKit.WebContent.CB40CFB2-B52D-48F9-9EA0-567E7FCBF840[406]) Could not terminate job: 3: No such process
6/19/14 9:28:53.704 AM com.apple.launchd[1]: (com.apple.WebKit.WebContent.CB40CFB2-B52D-48F9-9EA0-567E7FCBF840[406]) Using fallback option to terminate job...
6/19/14 9:28:53.714 AM com.apple.launchd[1]: (com.apple.WebKit.Networking.934CF6D4-8C34-4E5B-A580-C49AF13763E2[235]) Exited with code: 1
6/19/14 9:28:53.924 AM com.apple.launchd.peruser.501[156]: ([0x0-0xa00a].com.apple.Terminal[167]) Exited: Killed: 9
6/19/14 9:28:53.924 AM login[238]: DEAD_PROCESS: 238 ttys000
6/19/14 9:28:53.924 AM login[247]: DEAD_PROCESS: 247 ttys001
6/19/14 9:28:53.951 AM com.apple.launchd.peruser.501[156]: ([0x0-0x9009].com.apple.dt.Xcode[165]) Exited: Killed: 9
6/19/14 9:28:53.958 AM WindowServer[118]: CGXGetConnectionProperty: Invalid connection 69343
6/19/14 9:28:53.958 AM WindowServer[118]: CGXGetConnectionProperty: Invalid connection 69343
6/19/14 9:28:53.958 AM WindowServer[118]: CGXGetConnectionProperty: Invalid connection 69343
6/19/14 9:28:53.959 AM WindowServer[118]: CGXGetConnectionProperty: Invalid connection 69343
6/19/14 9:28:54.024 AM WindowServer[118]: CGXGetConnectionProperty: Invalid connection 59395
6/19/14 9:28:54.025 AM WindowServer[118]: CGXGetConnectionProperty: Invalid connection 59395
6/19/14 9:28:54.025 AM WindowServer[118]: CGXGetConnectionProperty: Invalid connection 59395
6/19/14 9:28:54.025 AM WindowServer[118]: CGXGetConnectionProperty: Invalid connection 59395
6/19/14 9:28:54.025 AM WindowServer[118]: CGXGetConnectionProperty: Invalid connection 59395
6/19/14 9:28:54.026 AM WindowServer[118]: CGXGetConnectionProperty: Invalid connection 59395
6/19/14 9:28:54.026 AM WindowServer[118]: CGXGetConnectionProperty: Invalid connection 59395
6/19/14 9:28:54.026 AM WindowServer[118]: CGXGetConnectionProperty: Invalid connection 59395
6/19/14 9:28:54.027 AM WindowServer[118]: CGXGetConnectionProperty: Invalid connection 59395
6/19/14 9:28:54.029 AM WindowServer[118]: CGXFilterEventToConnection : Invalid connection
6/19/14 9:28:54.033 AM WindowServer[118]: CGXFilterEventToConnection : Invalid connection
6/19/14 9:28:54.048 AM com.apple.launchd.peruser.501[156]: (com.apple.universalaccessAuthWarn[501]) Exited: Killed: 9
6/19/14 9:28:54.048 AM com.apple.launchd.peruser.501[156]: (com.apple.AirPlayUIAgent[472]) Exited: Killed: 9
6/19/14 9:28:54.051 AM com.apple.launchd.peruser.501[156]: (2BUA8C4S2C.com.agilebits.onepassword-osx-helper[435]) Exited: Killed: 9
6/19/14 9:28:54.055 AM com.apple.launchd[1]: (com.apple.ShareKitHelper[218]) Exited: Killed: 9
6/19/14 9:28:54.056 AM com.apple.launchd[1]: (com.apple.internetaccounts[227]) Exited: Killed: 9
6/19/14 9:28:54.058 AM com.apple.launchd.peruser.501[156]: ([0x0-0x25025].com.apple.AppleSpell[426]) Exited: Killed: 9
6/19/14 9:28:54.059 AM com.apple.launchd.peruser.501[156]: (com.apple.iTunesHelper.71840[457]) Exited with code: 1
6/19/14 9:28:54.065 AM WindowServer[118]: CGXSetWindowListSystemAlpha: Invalid window 127 (index 0/1)
6/19/14 9:28:54.131 AM sessionlogoutd[751]: sessionlogoutd Launched
6/19/14 9:28:54.141 AM sessionlogoutd[751]: DEAD_PROCESS: 83 console
6/19/14 9:28:54.154 AM com.apple.launchd.peruser.501[156]: (com.wacom.wacomtablet[449]) Exited with code: 1
6/19/14 9:28:54.223 AM com.apple.launchd.peruser.501[156]: (com.wacom.WacomTouchDriver.235168[464]) Exited with code: 1
6/19/14 9:28:54.254 AM Core Sync[531]: NSDistantObject (0x102017100) is invalid (no connection)
6/19/14 9:28:54.345 AM shutdown[755]: reboot by _atsserver:
6/19/14 9:28:54.345 AM shutdown[755]: SHUTDOWN_TIME: 1403195334 344842
6/19/14 9:28:54.000 AM kernel[0]: Kext loading now disabled.
6/19/14 9:28:54.000 AM kernel[0]: Kext unloading now disabled.
6/19/14 9:28:54.000 AM kernel[0]: Kext autounloading now disabled.
6/19/14 9:28:54.000 AM kernel[0]: Kernel requests now disabled.

SPA112 Reboot every 72 hours (3 days) exactly.

Hi,
I have a Cisco SPA112 which connects to a 3CX server. I also have addional phones, inluding Cisco SPA504G phones.
The issue I have is the SPA112 reboots every 3 days, exactly to the minute. This has happened 3 times now. The 504G is fine (40+ days uptime)
Nothing has changed on the provisioning of the ATA, when I do change things it reboots at 02:00 as expected, so I don't think this is related to reprovisioning.
I can provide more information e.g. logs if required, but thought I'd initially check if there is possibly a setting somewhere that I am unaware of that would cause this reboot every 72 hours exactly.
Thanks in advance,
Marcus

I should have included this information:
Product Information
Product Name:
SPA112
Serial Number:
CCQ162503NC
Software Version:
1.2.1(004)
Hardware Version:
1.0.0
MAC Address:
C40ACBBC7XXX
Client Certificate:
Installed
Customization:
Open
System Status
Current Time:
9/9/2012 22:13:41
Elapsed Time:
00:35:12
RTP Packets Sent:
0
RTP Bytes Sent:
0
RTP Packets Recv:
0
RTP Bytes Recv:
0
SIP Messages Sent:
24
SIP Bytes Sent:
20821
SIP Messages Recv:
23
SIP Bytes Recv:
10833
As you can see the elapsed time is 35 mins, this ties in with the reboot event.

I upgraded to Maverick and now my mouse pad works sporadically. I need to reboot every 3-4 minutes. How can I fix this?

Has anyone had the problem of their mouse pad working sporadically after downloading Maverick? I need to "sleep" mine every 2-3 min to get it to work again. Help

By "mouse pad" do you mean trackpad?
Try a SMC reset: Intel-based Macs: Resetting the System Management Controller (SMC)

Why do I have to reboot my iPhone 6 every hour to have internet and mail service???

Every hour or two I have to power off my 6 then power on in order to have internet and mail service. Is anyone else having this problem?

I'm having the same exact issue. I have the same phone/OS. Just switched from AT&T to Verizon so I wasn't sure whether it was my service or the phone. The same connectivity issues are happening to me with things like My Fitness Pal or Facebook notifications. Fitness app won't load or connect and for Facebook, I'll get a notice that I have one, I go to FB and it won't load the notifications or even load new stories on there for that matter. So AGAIN, I have to restart and POOF! I can use FB, Fitness App, etc AND I have 20 emails all of a sudden. So frustrating!

SSIS Package : Needs SQL Tables get refreshed every hour

Hello,
I have created a SSIS Package which includes,
Step 1 : Using Execute SQL Task to truncate all the tables
Step 2 : Data Flow Tasks to extract data from SharePoint lists and fill the SQL Tables for SSRS Reporting from that.
Requirement is to refresh SQL Tables every hour. I can do this using SQL Server Agent Job to run SSIS Package.
But, I am not sure is this the feasible way of do this, as we are truncating all the tables. There are around 10-15 tables. Database size is also not large.
Is there any in SSIS to impose only changes done in the SharePoint list to SQL tables rather than truncating them and creating new ones?
Thank you,
Mittal.

@Visakh,
Yes I am getting Created,CreatedBy, Modified, ModifiedBy audit fields data from all the SharePoint List.
So, can we just trust these fields and update tables accordingly ?
And how can I do this using SSIS ? Is there any particular control I can use to compare the data and time and update the SQL Tables?
Thank you,
Mittal.
Yes. Provided they have proper data thiat should work fine.
Yes you can use it inside SSIS
You can have a logic like below
1. In execute sql task capture max date for the source table
2. Use data flow task with source query having filter based on date field
ie like
WHERE Modified > ?
And map parameter to maxdate
3. add destination step to populate data
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

Why is the purge command running every hour, and freezing my system?

I noticed over the past several days that my mac pro will freeze for several seconds (clock stops, mouse/keyboard don't work. completely frozen) every hour, to the minute.
I've tracked it down to the "purge" command, which is causing the problem. But, I can't find where it's being called. Any hints where I might look to find the cause?
I don't believe this was happening a few days ago. I have installed all software updates.
I'm running 10.7.5 on a 2x2.66Ghz 6-core mac pro.
Thanks!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). Post the lines of output (if any) that appear below what you just entered. You can do that by copying and pasting as well. Omit the final line ending in “$”. No typing is involved in this step.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time you'll be prompted for your login password, which you do have to type. It won't be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

WRVS4400N needs to be rebooted every 24 hours

Similar Messages

Maybe you are looking for