WRVS4400N problem logging into the routers administrative console with vista OS

I have a problem that is OS specific on the Linksys WRVS4400N Gigabit router. When I try to login to my routers admin page using VISTA IE7 I am prompted by the NT dialog at which point I type the correct admin UID and PWD. I am then prompted over and over again until it either gives me an access denied or I am successfully logged in; furthermore if I do log in successfully I am prompted to login again whenever I click another tab in the admin console and the same thing of repetitive login attempts occurs. I have tried turning off UAC, changing intranet security levels to low to no avail. I have the latest firmware update of 1.00.16. Any help is greatly appreciated also anyone else experiencing the same issue?
Message Edited by JKru on 09-26-2007 05:16 PM

Hi first time poster and forum user although I have owned and used PC's since 1988 and have always managed to get things configured correctly until NOW
I too am trying to log into the admin console of a WRVS4400N and have tried both browsers (IE9 and Google Chrome) that are installed on a laptop running Win7 which in turn is the only thing connected to the stated device via ethernet port 1... when using the suggested https://192.168.1.1 (which I know is the correct IP address because 'ipconfig' reveals that it is the default gateway and that it has assigned an IP address of 192.168.1.100 to my laptop).
I hope I have convinced you all that I am not a complete dummy... but this thing just refuses to let me in... gives me the login dialogue box in either http:// or https:// format and just let's me enter admin and admin any number of times and does little else - though occasionally it has gone to the 401 error screen - I cannot be sure of why - it is possible that I did mis-type something in my frustration
Has anyone got a clue?
Many thanks,
Rob

Similar Messages

Problems logging into the web interface

The issue is with a TCS running 6.1 firmware. This is the response from my customer:
Today, I tried to check some of the settings on the TCS and found I could not log on. I get a login prompt, but after entering my user name and password there is a long pause and then I get an HTTP 500 "internal server error."
I went looking through some logs and found this in the ContentEngine log:
14 2014-12-11T15:54:09-05:00 Error: Executing SQL query, SQL error occurred while getting number of result columns [db_database = TCSDBv3, db_host_name = 127.0.0.1, db_instance = TCS, db_port = 2090, db_user_name = tcsdbuser, sql_error = error code: 10054 state: 01000 message: ConnectionWrite (send()).error code: 11 state: 08S01 message: General network error. Check your network documentation., sql_query = UPDATE [dbo].[CSCluster] SET vicePoll = DATEDIFF(s, '19700101', GETUTCDATE()), hdNode=0, liveCalls=2, maxCalls=10 WHERE serialNumber='49A30159'; SELECT @@ROWCOUNT] - Query not executed
15 2014-12-11T15:54:09-05:00 Error: Setting recording engine application status in database, Database unavailable [serial_number = 49A30159] - Application status will be set when database becomes available
I restarted the server and now I get no errors in the ContentEngine log, but the problem persists. Now I find this in the ContentLibrary log, each line corresponding to a failed login attempt:
[11-Dec-2014 20:46:22] (6.0.3528) PHP Error: Maximum execution time of 30 seconds exceeded C:\Program Files (x86)\TANDBERG\ContentServer\ContentLibrary\includes\ldap.inc line 196
Cannot continue to process page - fatal error occurred.
[11-Dec-2014 20:46:56] (6.0.3528) PHP Error: Maximum execution time of 30 seconds exceeded C:\Program Files (x86)\TANDBERG\ContentServer\ContentLibrary\includes\ldap.inc line 196
Cannot continue to process page - fatal error occurred.
[11-Dec-2014 20:48:51] (6.0.3528) PHP Error: Maximum execution time of 30 seconds exceeded C:\Program Files (x86)\TANDBERG\ContentServer\ContentLibrary\includes\error.inc line 425
Cannot continue to process page - fatal error occurred.
[11-Dec-2014 21:06:53] (6.0.3528) PHP Error: Maximum execution time of 30 seconds exceeded C:\Program Files (x86)\TANDBERG\ContentServer\ContentLibrary\includes\ldap.inc line 196
Cannot continue to process page - fatal error occurred.
[11-Dec-2014 21:14:57] (6.0.3528) PHP Error: Maximum execution time of 30 seconds exceeded C:\Program Files (x86)\TANDBERG\ContentServer\ContentLibrary\includes\ldap.inc line 196
Cannot continue to process page - fatal error occurred.
I only get this error after entering a valid user name and password - if I enter bad authentication tokens, I get the appropriate error. So whatever this is, it's happening after I successfully authenticate.
Can someone help me in finding the problem.

No. The issue corrected itself. Not sure what caused the problem.

Logging into the Directory Administrator

I have just installed the Xserve software and I need to access the Directory Administrator in Workgroup Manager, however, the password is different from that of my login administrator password. I have never assigned a password to the Directory Administrator that I know of and I am not sure if there is a default password that the Xserve automatically gives it.
I have already tried to go into the terminal and reset the password, but I get to the part where it asks you to put in the new password and I get an error message that reads: policy violation error -9. If there is a default set up for the Directory Administrator would the username be Directory Administrator or is it something else? Also do I need access to the Directory Administrator in order to setup iCal for the office to use?
Any help with anything in this post would be great and I would really appreciate it.

I was just curious about two things one do I create the new user in Workgroup Manager or as a new administrator? And Two, when I do swap out the password-slot-pointer for the diradmins account can I do it in Extracting the slot ID using Terminal or does it have to be done in the workgroup manager?
I just can't seem to figure out why my password isn't working because I found where I wrote it down when I assigned the Open Directory and I have used every username possible including the default. The other thing I noticed was that when I changed Workgroup Manager to show all records and tried to view the Inspectors tab it wouldn't let me click the disclosure triangle next to AuthenticationAuthority, so that is why I have to use the extracting slot ID using Terminal to get the password. Although I find it weird that the slot ID for diradmin is just 0x00000000000000000000000000000001 instead of something like 0x4918a2866b8b45670000000200000002.
If you have anyway to help me with this or just anymore information it would be great and much appreciated.

Having problems logging into the apple apps

hi i have got an iphone 4 and i am trying to log in to buy some games i am putting my id and my password but it keeps saying the password is wrong. i have resetted my password several times but still wont allow me to log in. can anyone help me with this please

I lost my account somehow also. I had to create a new alias and start over fresh.
Don't know what happened. I tried to log in with my iPod Touch and it kept telling me that I had to create an account. So, I went back to my computer (which was still logged on with my id)and logged off and then tried to log back in....my account was gone.
So...here I am with a new account. LOL

Problem log into the local host

We have recently upgraded a test box from 47 EXT set 1, to 47 Ext set
2.0, we have added the parameter :
rdisp/j2ee_start =1 to our profile and icman is running on port 8080
we can check that in transaction SMICM but when we go to transaction
sicf to try to enable all the nodes and try to
do http://localhost:50000 on server we get error out saying that host is
not avilable. Is there a parameter I am missing?

ok, i suppose, you haven't configured the plugins, yet.
otherwise you should see something like this:
No. Protocol           Service Name/Port    Host Name             Timeout Activ Ext.Bind
1 HTTP         <b>8080</b>                <host>      60 X
2 SMTP            0                    <host>      60 X
got to SMICM / Goto / Parameters / Change and edit the parameters as described above, then restart sap.
kr, achim

I'm having a problem logging into the Netflix app (117)

I've repeatedly entered the correct username and password, only to have it tell me that I have entered them wrong with an error code of 117.
I've contacted customer support at Netflix, and it seems that their solution is to recommend changing my Netflix password. The only way to make it work though seems to be to change it to a number only password. I don't trust the security of that. Any other tips or ideas on how to get it to login?
Also, how can I report a bug on this? To whom would I report it? Who makes the Netflix app on the Apple TV? Netflix or Apple?

I'm having the same issue, changed Netflix password, reset apple tv...still error (117) wrong username & password. I know i have them correct as I can connect on my iPad?
Any solutions. This is the first time I have used Netflix since updating apple tv to ver 4.4.3 a couple of days ago??

I am unable to log into the Contribute administration panel through Dreamweaver

I am using Dreamweaver CS5.5 and I suddenly am no longer able to administer Contribute through Dreamweaver. I click the "Administer Site in Contribute" button and the program appears to be checking files but, when this is finished, the password login window does not show up. Any suggestions for solving this issue?

Please try the following steps:-
Choose Site > Manage Sites.
Select your site and Click Edit.
Select the Servers category.
Select the server to modify and click the Pencil icon.
Change you password (set an incorrect password), then click Save.
In the Site Setup dialog box, expand Advanced Settings, select the Contribute category.
Click Administer Site in Contribute. It would show you an error message.
Now
Click on Select the Servers category.
Select the server to modify and click the Pencil icon.
Change you password (type the correct password), then click Save.
In the Site Setup dialog box, expand Advanced Settings, select the Contribute category.
Click Administer Site in Contribute. It would show you the password login window.
Hope it helps.

I cannot log into the oracle account using GNOME interface

I'm receiving the following message when trying to log into the oracle OS account with the GNOME interface turned on:
GDM could not write to your authorization file. This could mean that you are out of disk space or that your home directory could not be opened for writing. In any case, it is not possible to log in. Please contact your system administrator.
I can successfully ssh into the oracle account via a terminal window session.
df -h on the host does not show a problem with disk space:
[root@oel1 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
3.9G 2.6G 1.1G 71% /
/dev/xvda1 99M 13M 81M 14% /boot
tmpfs 513M 0 513M 0% /dev/shm
/dev/mapper/VolGroup00-u02
20G 173M 19G 1% /u02
/dev/mapper/VolGroup00-u03
20G 1.9G 17G 10% /u03
/dev/mapper/VolGroup00-u01
20G 44M 19G 1% /u01
/dev/mapper/VolGroup00-orabin
7.9G 147M 7.4G 2% /orabin
/dev/mapper/VolGroup00-tmp
2.0G 68M 1.9G 4% /tmp
/dev/mapper/VolGroup00-home
2.0G 68M 1.9G 4% /home
Some searching on the internet indicated that the .Xauthority file was the problem.
I noticed that there was no .Xauthority file in the /home/oracle directory. I logged into the oracle OS account via a terminal session and issued the command mkxauth -c. This created an .Xauthority file in my /home/oracle directory. The file has the following permissions which look like they match other hosts we have the Oracle Database running on:
-rw------- 1 oracle oinstall 265 2011-03-08 13:32 /home/oracle/.Xauthority
Any heal is greatly appreciated.
JS

Thanks for the replies. I obviously had something screwed up in my environment in terms of file permissions.
I decided that since I am new to Oracle VM and management of the Oracle Enterprise Linux VM templates, and that this was a new instance of the OEL5 template installation, I would start over. So I unzipped the OEL5 template, copied over my vm.cfg file which configures the template instance and brought up a new copy of the OEL5 VM instance. I then logged into it as root, changed the oracle account password and started the GNOME interface with telinit 5 command.
I was then able to log in successfully to the oracle account via the GNOME interface.
Thanks for the replies.
John S.

Cn=orcladmin cannot log into OID Self Service Console

Dear All 1!!
I synchronized my Microsoft AD users with Oracle Internet Directory server, and configure these users for external authentication through the use of plug-in. Every thing was running fine, unless i disabled the plug-in to enable it later again. After this activity, my orcladmin cannot log into the OID Self service console, however the migrated users can successfully log in. I can still log into the Oracle Directory manager with orcladmin.
Is there something specific i need to do to enable orcladmin to log into the self service console again.
Regards,
SwapSawe.

Hi All !!!
I resolved this one, it was easy, wonder how did i miss it. The solution is to open the Oracle Directory Manager, traverse to Pluin-Management, adwhencompare/adwhenbind -> Optional properties, and enter "(|(!(objectclass=orcladuser))(cn=orcladmin))" in Plug-in Entry properties. It required a system restart to work it well, just a restart for OID ias-component won't work.
Thanks for the look,
Regards,
Swapnil.

Problem logging into icloud on windows vista

i am unable to log into the icloud on my windows vista ....can some one help me....the password is correct so is the id..

what is the error message ? If it says you need to wait or something like a Server error, then it might just be that Apple's servers are struggling. happens often this times as it is a new service that everybody wants to use. Tons of data..

Unable to log into the user management administration web console

Can someone tell how resolve my ablity to log into the user management administration web console? I can't log into SAP Netweaver Admin, User managment, and Webdynpro content Administrator and Web Dynpro Consol. But able active j2ee engine sample? Is there some that I need activate to allow me log in?
http://localhost:50000/logon/logonServlet?redirectURL=%2Fuseradmin%2FuserAdminServlet%3FgotoDefaultPage%3D.

Hi,
I had this problem also. For me it worked to log on to the SLD and then I was able to log on to the other applications like Useradmin and NWA.
The SLD is usually available at <a href="http://localhost:50000/sld">http://localhost:50000/sld</a>.
Regards,
Sebastian

Having problem with svchost.exe/ntdll.dll errors causing GPSVC (Group Policy Client) to crash preventing users from logging into the server.

Recently (within the past 2 weeks) I have noticed a few of our servers will have problems with the svchost.exe application causing the GPSVC (Group Policy Client) to crash. The only fix at that point is to reboot the server since the GPSVC service is tied
to svchost.exe and therefore is protected from being manually restarted.
I noticed the following errors when this occurs:
Log Name: Application
Source: Application Error
Date: 7/23/2013 4:35:26 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Server1.xxx.xxx.net
Description:
Faulting application name: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000024
Fault offset: 0x00000000000cd7d8
Faulting process id: 0x46c
Faulting application start time: 0x01ce877f9476ac07
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: d252d26d-f372-11e2-8ad4-005056ac00e8
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-23T08:35:26.000000000Z" />
<EventRecordID>158950</EventRecordID>
<Channel>Application</Channel>
<Computer>AAW19XM2.agency.nwie.net</Computer>
<Security />
</System>
<EventData>
<Data>svchost.exe</Data>
<Data>6.1.7600.16385</Data>
<Data>4a5bc3c1</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.17725</Data>
<Data>4ec4aa8e</Data>
<Data>c0000024</Data>
<Data>00000000000cd7d8</Data>
<Data>46c</Data>
<Data>01ce877f9476ac07</Data>
<Data>C:\Windows\system32\svchost.exe</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>d252d26d-f372-11e2-8ad4-005056ac00e8</Data>
</EventData>
</Event>
All of our servers are running Server 2008 R2 Enterprise where we use Citrix to deliver desktop sessions to our users, but some are virtual and some are physical. This seemingly impacts our virtual machines more, and our VMs are hosted through VMWare, however,
about 5 months ago a similar error fired on a non-virtual machine:
Log Name: Application
Source: Application Error
Date: 2/27/2013 6:57:58 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: AAW29033
Description:
Faulting application name: svchost.exe_gpsvc, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000024
Fault offset: 0x00000000000cd7d8
Faulting process id: 0x6c0
Faulting application start time: 0x01ce14e1af313fd9
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: ed3d01c4-80d4-11e2-9128-b499baa9e5e8
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-02-27T11:57:58.000000000Z" />
<EventRecordID>286291</EventRecordID>
<Channel>Application</Channel>
<Computer>AAW29033</Computer>
<Security />
</System>
<EventData>
<Data>svchost.exe_gpsvc</Data>
<Data>6.1.7600.16385</Data>
<Data>4a5bc3c1</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.17725</Data>
<Data>4ec4aa8e</Data>
<Data>c0000024</Data>
<Data>00000000000cd7d8</Data>
<Data>6c0</Data>
<Data>01ce14e1af313fd9</Data>
<Data>C:\Windows\system32\svchost.exe</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>ed3d01c4-80d4-11e2-9128-b499baa9e5e8</Data>
</EventData>
</Event>
I've searched and cannot seem to find any information as to what may be causing this, or even really where to start. Would someone be able to help me identify what might be causing this event, specific with the Exception code: 0xc0000024, which causes
the Group Policy Client service to stop?

You still out there looking at things? If so I have an update. The issue hasn't stopped, even though it did seemingly die down for awhile, however, it is now back with a vengeance.
I am able to force it to happen by killing the svchost process that is hosting GPSVC. If I run gpupdate /force, then logout/login it does get GPSVC running again. Furthermore, if I simply start svchost again via the Task Manager GPSVC starts running again.
When I access the server remotely with KVM it acts just like it does as if I'm logging into it via Citrix/RDP which for Admin IDs gives an error saying "Failed to connect to a windows service. Windows could not connect to the Group Policy Client service...",
however, normal user accounts just get a message when logging into the server "The Group Policy Client Service Failed the Logon. Access is denied."
I haven't opened a case with Microsoft yet, but we about ready to because of the increase in these errors.
If you have any further suggestions that would be great, otherwise I'll provide an update once I get word back from Microsoft.
**EDIT -- apparently I mistook the the server's SCM's actions as my own. I was able to successfully crash the GPSVC service by killing the hosting svchost process, however, after I crashed it and let it sit crashed for awhile when I attempted
to restart either by starting a svchost task, or running gpupdate /force it failed. Either that, or there is a timing issue where if we don't restart the svchost process, or run gpupdate /force quickly enough it won't be able to recover without a reboot.

Problem when we log into the Webclient with IC_AGENT business role

Hello,
We are facing a problem when we log into the interaction center ( with IC_AGENT business role) after the login screen ( we fill the correct user and password) then system starts the application, but a error appears.
We dont knon why but it is happening only with IC_AGENT role, We have check the SICF and it is ok.
Cannot display view ICCMP_HEADER/HeaderViewSet of UI Component ICCMP_HEADER
An exception occurred during the internal HTTP communicationException Class CX_BSP_WD_HTTP_RESPONSE_ERROR
Text:
Additional Info: Business Server Page (BSP) Error
Program: CL_BSP_WD_STREAM_LOADER=======CP
Include: CL_BSP_WD_STREAM_LOADER=======CM002
Source Text Row: 159
Cannot display view CRM_UI_FRAME/WorkAreaViewSet of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View BPIDENT.MainWindow in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Initialization of view CRM_UI_FRAME/WorkAreaViewSet of UI Component CRM_UI_FRAME failed
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View BSPWD_BASICS/WorkAreaHostViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Cannot display view CRM_UI_FRAME/MainWindow of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View BSPWD_BASICS/WorkAreaHostViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Initialization of view CRM_UI_FRAME/MainWindow of UI Component CRM_UI_FRAME failed
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/WorkAreaViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Cannot display view Root.htm of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/WorkAreaViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
An error occurred during initialization of the application
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/MainWindow in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Any help thanks in advance.

hi luis,
your error description reminds me of an inactive SICF, but you wrote, that you checked this before.
on this forum is an excellent entry with lots of hints and tipp for the IC WebUI:
Documentation for Interaction Center (IC) WebClient
Documentation for Interaction Center (IC) WebClient
maybe this will help.
best wishes,
hakan

Error message: "Logging into the account failed because an error occurred."

Hello,
We had an XServe G5 2.0 DP 5GB/80/2x250 running Mac OS X 10.3.9 Server with all updates as a main server for a school. The server provides Open Directory Master as well as File-Sharing (AFP and SMB) and e-mail services to about 30 teachers and 300 students. The user home directories reside on the server. A web server also runs on the machine. The students use a pool of laptops, which are configured with a local guest and admin account as well as access to the server-based home directories with Directory Access. The server had the OS running on the 80 GB hard drive and all data (Home directories, mail database, website, etc. were on the two mirrored 250 GB drives.) All was working well until...
A few weeks ago, one of the two 250 GB died. We decided to use the opportunity to upgrade the server and set it up with 3 x 750 GB, two drives running as a mirrored pair to hold OS AND Data, the other as a stand-by unit to help replace a failing drive.
We migrated the OS and all data from the previous drives without a problem. Since now, all data is residing on one pair of drives, we put the data from the old "Data" drive in a folder on the root level of the new HD pair. We wrote a script that launches at startup which creates the symlink in /Volumes/Data to link to /Data. We thought that with this, all would be well.
However: When any user tries to log into his account from any iBook (10.3.9 or 10.4.11) (wirelessly), he gets the message:
"Logging into the account failed because an error occurred. The home folder for the user account is located on an afp or smb server. contact your system administrator for help"
If the user logs in to the guest account on the iBook, then accesses his home directory via file-sharing, he can see (read/write) all his data. So, the data and privileges seem to be OK, as well as Open Directory working correctly. Mail and the web work well also, as does logging in to a user account from one of the PC's (wired).
Can anyone make any suggestions as to how to fix the situation? Currently, the users are using the guest accounts and accessing their data via filesharing, as well as using webmail for their e-mail, but this is a major nuisance.
Any help will be greatly appreciated.
Best regards,
Alain Chammas
A user trying to access his account from a PC (wired) has no problems.

A good number of folks are having problems with this same error message at login, and nobody seems to have found a fix.
I believe I have stumbled upon, if not a solution, at least part of the answer. If you're logged into a 10.4 workstation, open a Finder window and click the "Network" icon. The first time you do this, you'll only see "Library" and "Servers" icons, but if you let it sit for a moment, other folders will magically appear. One of these is "My Network" which is the critical part.
In Workgroup Manager, edit one of your users' home directory configuration. There's a URL piece, usually "afp://server.domain.com/Users" (which is what shows up in the window when you click on the "Home" tab for that user), and then there's a "Home" path that is usually something like "/Network/Servers/servername/Users/username". Trouble is, you've noticed that 10.4 doesn't put servers into the "Servers" path, but rather into the "My Network" path.
So, if you change that "Home" path to read "/Network/My Network/servername/Users/username", it should work--with one caveat. Apparently 10.4 doesn't create the "My Network" path on a given client until you actually browse the network on that client. If you haven't logged into a 10.4 workstation and browsed the network, the "My Network" path won't be there, and you'll still get the error. Login as a local user, browse the network (so that the "My Network" folder shows up), logout, and then login as an Open Directory user, and it should work.
I'm betting that 10.3, 10.4, and 10.5 all handle this issue differently, so if you're in a mixed-version situation, you may have to experiment to find a workable fix.
Derndest thing I ever saw.

Whycan't connect the Essbase Administration console to the OLAP server?

I have a problem about Essbase Administration console.After I install all the product of the Essbase, (includeing the 6540ns?6540na?6540am?654032?6540rt?eas653_nt). i can't connect the Essbase Administration console to the Essabse OLAP server.The Administrator server,username and password is correct but there is "can't connect to the server"error. All the installtion process this time is the same as berfore i have done, and there was no question when connectting to the Essabse OLAP server before. I don't know how to solve this problem, and it hold back me to continue my other work. the essbase OlAp server and the Essbase Administration console are both installed on the same PC, useing window2000 professional best regards Lornawei

thanks for answer.server is running. Analyzer and spreadsheet add_in can connectted to the server correctly.I installed the EAS not as as a Windows service,and i cann't even login to the EAS console,and check the EAS log i remember there is some wrong with connect the Mysql services.yesterday i installed the EAS as as a Windows service,and have connect to the server correctly mannually.I don't know why I can't install the EAS not as as a Windows service now.

WRVS4400N problem logging into the routers administrative console with vista OS

Similar Messages

Maybe you are looking for