WRVS4400n, QuickVPN, Server's certificate doesn't exist on local computer

Hi,
I bought a new WRVS400n recently because it had Gigabit speed, wireless n and a built in VPN server. The device works perfect except for the Quick VPN client. I'm a system engineer so I thought I could set it up quite easy just like any other device I configured in the past. Painfull but it isn't like this.
I set up the VPN on the WRVS4400n and generated a certificate. I saved both the client and admin certificate to my pc, I gave them a name to easily make up the difference between both of them. When placing the certificate in the installed QuickVPN folder, it doesn't seem to get recognised by the QuickVPN software. When I try to connect, it says 'Server's certificate doens't exist on your local computer'. I guess the naming convention must meet some kind of format, is that correct? If so, this should have been described in the documentation.
Besides that I checked if the required ports used by the VPN server are open on the public port of the device, that is the case. So It seems I'm quite close to get it working.
The version of QuickVPN I used is 1.4.2.1. The WRVS4400n has the latest firmware loaded.
Kind regards,
Pieter.

>I set up the VPN on the WRVS4400n and generated a certificate. I saved both the client and admin certificate to my pc
The "certificate for client" should be saved as a .pem file and copied into the install directory of QuickVPN client.
The "certificate for admin" is used as a backup, which can be used to re-provision the router in case admin needs to reset the router to factory default for any reason.

Similar Messages

QuickVPN, Server's certificate doesn't exist on local computer

Hi,
I bought a new WRVS400n recently because it had Gigabit speed, wireless n and a built in VPN server. The device works perfect except for the Quick VPN client. I'm a system engineer so I thought I could set it up quite easy just like any other device I configured in the past. Painfull but it isn't like this.
I set up the VPN on the WRVS4400n and generated a certificate. I saved both the client and admin certificate to my pc, I gave them a name to easily make up the difference between both of them. When placing the certificate in the installed QuickVPN folder, it doesn't seem to get recognised by the QuickVPN software. When I try to connect, it says 'Server's certificate doens't exist on your local computer'. I guess the naming convention must meet some kind of format, is that correct? If so, this should have been described in the documentation.
Besides that I checked if the required ports used by the VPN server are open on the public port of the device, that is the case. So It seems I'm quite close to get it working.
The version of QuickVPN I used is 1.4.2.1. The WRVS4400n has the latest firmware loaded.
Kind regards,
Pieter.

>I set up the VPN on the WRVS4400n and generated a certificate. I saved both the client and admin certificate to my pc
The "certificate for client" should be saved as a .pem file and copied into the install directory of QuickVPN client.
The "certificate for admin" is used as a backup, which can be used to re-provision the router in case admin needs to reset the router to factory default for any reason.

RV120W QUICKVPN Server's certifcate doesn't exist on your local computer

Hi everybody
I'm trying to set up the vpn connection with my rv120W (FW:1.0.4.10).
I was able to configure everything correclty exept of one thing...
Every time when I connect I'm gettging the message:
"Server's certifcate doesn't exist on your local computer Do you want to quit this connection ?"
When I Clik NO it connects and works.
but this is annoying ...
I tried to do following things:
1.
RV120W-
Security-> SSL Certificate -> Download Router certificate -> Export for client.
Fille httpd.pem save to C:\Program Files\Cisco Small Business\QuickVPN Client
no improvement
2.
I used the "manual method"
C:\Program Files\Cisco Small Business\QuickVPN Client>openssl.exe s_client -showcerts -connect xxx.xxx.xxx.xxx:443 > cert.pem
no improvement
3.
I added to hosts according to the :
http://community.linksys.com/t5/Wired-Routers/Server-s-certificate-doesn-t-exist-on-your-local-computer-Do-you/td-p/93846
in my case CN is a strong of digits and number
no improvement
What I'm missing or what is wrong here ?
Thanks in advance for help .

Dear Customer,
Thank you for reaching Small Business Support Community.
Other that the things you have already tried, I suggest you to make sure you are using the latest QuickVPN client version 1.4.2.1 and it comes to my mind the problem may be related to the CN you use, have you tried to generate a new certificate with an easier to resolve name? Try also with MD5 hash algorithm and signature key length of 512 on the new certificate. Please give this a try and let us know the results in order to assist others and help improve the Cisco products.
Notice you may also contact the Small Business Support Center for further assistance;
https://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Thank you for your time and patience. Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

RV110W and QuickVPN - Servers Certificate Doesn't Exist

After a day of troubleshooting I have finally got the QuickVPN client to work. I connect however during the connection I get: "Server's certificate doesn't exist on your local computer. Do you want to quit this connection?" I click no and it connects fine other than this error. So how do I get rid of this error?
Also I have exported the client certificate from the RV110 and put it in the quickvpn directory as I saw suggested elsewhere.
Thanks,
Clint Johnson
Here is my log:
2011/12/21 00:39:44 [STATUS]Connecting...
2011/12/21 00:39:44 [DEBUG]Input VPN Server Address = ***.***.***
2011/12/21 00:39:45 [STATUS]Connecting to remote gateway with IP address: **.**.**.***
2011/12/21 00:39:50 [WARNING]Server's certificate doesn't exist on your local computer.
2011/12/21 00:39:56 [STATUS]Remote gateway was reached by https ...
2011/12/21 00:39:56 [STATUS]Provisioning...
2011/12/21 00:40:06 [STATUS]Success to connect.
2011/12/21 00:40:06 [STATUS]Tunnel is configured. Ping test is about to start.
2011/12/21 00:40:06 [STATUS]Verifying Network...
2011/12/21 00:40:11 [WARNING]Failed to ping remote VPN Router!
2011/12/21 00:40:14 [WARNING]Failed to ping remote VPN Router!

I am having the same issue. I generated a certificate by selecting "Generate a New Certificate" and "Export for Client" which creates a file https.csr that I saved it into C:\Program Files (x86)\Cisco Small Business\QuickVPN Client folder.
Still get ther same error message. I click not to quit and so it continues to make the connection successfully.
After connecting though, I cannot see any of my NETWORK Shares. I can connect to my local intranet by typing in the server address directly in the browser. However, I cannot see any computers in my network. I think this is a completely different problem though and should not have anything to do with the certificate issue.
I need to resolve both these issues.
I am using Windows 7 Professional from my remote location (home) which is connected to a D-LINK router which is behind a DSL Modem. I am trying to connect to my Cisco RV-120W router at work.
Please help.
Mike

Why is my Firefox Aurora seems to be located in Program Files (x86)\Aurora\updated\firefox.exe, but that directory doesn't exist on my computer?

I'm using FusionDisplay to get a taskbar for my second monitor, and the taskbar has worked well until now. Now when I open pinned Aurora, it opens a new application and doesn't merge with the pinned down application icon.
It seems to locate the Firefox.exe to Program Files (x86)\Aurora\updated\firefox.exe, which doesn't exist. Also windows task manager right click menu for firefox.exe won't open anything when I click Open File Location.

Hi. I'm having the same problem with Final versions of Mozilla applications (FF and TB) on Win7 x64 as well. I don't have Display Fusion or the likes.
This started around FF15, and happens about every other update since. This is Very frustrating. Restarting the computer fixes it though. I'd never believe I'd have to restart the computer after pretty much about every update, major or minor. Now this happened to me for both FF19->19.02, and TB 17.0.3->17.0.4 at the same time. No other software running meanwhile.
This happens for about the 3 or 4th time. It's frustrating to have to restart every now and then for a browser update.
I'll stick to a version for both (19.0.2 and 17.0.4) forever, thanks Mozilla! Couple that with the inability of most versions of TB to sustain a longer uptime than 10-15 days with no addons and just 4 pop accounts with 50-100 emails and just one with 1000.

Where do I place third party plug folders for effects in Final Cut 10.1 under Mavericks? The /user/library/application support/final cut directory doesn't exist on my computer.

I can't seem to find the proper directory to copy third pary plugins for use under Final Cut 10.1. The ../library/appliation support/final cut pro directory doesn't seem to exist. Where do I put these files?

Um - they didn't go there with 10.0.x either. All the effects, titles, transitions, and generators in FCP X are Motion templates and get placed in user/movies/motion templates, into the appropriate folder depending on the type of effect.

Notes folder doesn't exist in my computer

hi~ I was wodering if you use
"notes" to read text files on your iPod?
I think this feature is really cool feature that Nano
does not have, but
I can't find Notes folder inside my iPod folder
(according to the manual).
Please help me out! Thank you
P.S.- I'm an XP user.

Try creating the folder. In Windows Explorer, go to File, New, Folder and name the folder Notes. If you put notes in there but they don't show up, do a restore (which will erase all of your data).

WRVS4400N quickvpn Vpn client accounts

                   Hello everyone, i'm new to cisco forum and i salute you all.
     Now lets get to business...hahaha
     Well i configured client account on the wrvs4400n v2 to use with quickvpn.
     3 of the 5 users created works fine when connecting to router but the other ones doesnt connect good.
     They all got the same client .pem install in Quickvpn.
     Let's say i try connecting with user num.2 with quickvpn it doesnt want to connect, it says connecting, for long time but noting happens.
     But when i look in VPN Summary on router it shows as connected?
         Any clue on whats going on?
     Thanx Pastload.

Hello mpyhala, thanks for the quick reply.
Yes i did try it on different PC. I can connect with no issue with my account on both PC with the same config. But not with user 2 and user 3. There is one error message about certificat, but if you click 'no' it will connect anyway, it works for the 3 users but not with the other 2's.
And yes i did uninstalled quickvpn twice (clean uninstalled). And no change, still can not connect with user 2 and 3. I have deleted user 2 and 3 and created different user with different password and still the same.
But if i look in vpn summary it shows user 2 as connected. But the quickvpn still showing ' connecting ' and it give me nothing.
Does someone knows how is this possible? Do you need Logs.
I notice that when establishing connection with my user the wget.exe make the connection and disconnect after connection is made.
But the 2 other users the connection establishes with wget.exe but it doesnt close connection. It stays connected until i close it my self.
Dont know if it could help.
Update:
User 1
2013/07/10 20:05:13 [STATUS]OS Version: Windows 7
2013/07/10 20:05:13 [STATUS]Windows Firewall Domain Profile Settings: ON
2013/07/10 20:05:13 [STATUS]Windows Firewall Private Profile Settings: ON
2013/07/10 20:05:13 [STATUS]Windows Firewall Private Profile Settings: ON
2013/07/10 20:05:13 [STATUS]One network interface detected with IP address 192.168.1.101
2013/07/10 20:05:13 [STATUS]Connecting...
2013/07/10 20:05:13 [DEBUG]Input VPN Server Address = xx.37.1.xx
2013/07/10 20:05:13 [STATUS]Connecting to remote gateway with IP address: xx.37.1.xx
2013/07/10 20:05:14 [WARNING]Server's certificate doesn't exist on your local computer.
2013/07/10 20:05:18 [STATUS]Remote gateway was reached by https ...
2013/07/10 20:05:18 [STATUS]Provisioning...
2013/07/10 20:05:28 [STATUS]Success to connect.
2013/07/10 20:05:28 [STATUS]Tunnel is configured. Ping test is about to start.
2013/07/10 20:05:28 [STATUS]Verifying Network...
2013/07/10 20:05:34 [WARNING]Failed to ping remote VPN Router!
*This user is connecting to router (Working)*
2013/07/10 20:07:03 [STATUS]Disconnecting...
2013/07/10 20:07:09 [STATUS]Success to disconnect.
User 2
2013/07/10 20:07:25 [STATUS]OS Version: Windows 7
2013/07/10 20:07:25 [STATUS]Windows Firewall Domain Profile Settings: ON
2013/07/10 20:07:25 [STATUS]Windows Firewall Private Profile Settings: ON
2013/07/10 20:07:25 [STATUS]Windows Firewall Private Profile Settings: ON
2013/07/10 20:07:25 [STATUS]One network interface detected with IP address 192.168.1.101
2013/07/10 20:07:25 [STATUS]Connecting...
2013/07/10 20:07:25 [DEBUG]Input VPN Server Address = xx.37.1.xx
2013/07/10 20:07:25 [STATUS]Connecting to remote gateway with IP address: xx.37.1.xx
2013/07/10 20:07:26 [WARNING]Server's certificate doesn't exist on your local computer.
2013/07/10 20:15:34 [WARNING]Failed to connect.
*This user doesnt connect why?*
* It hangs on Connecting in QuickVpn*
Same machine, same setting
--20:15:34--
https:// User 2: *password*@xx.37.1.xx :60443/StartConnection.htm?version=1?IP=192.168.1.101?PASSWD=*password*?USER=User 2
           => `C://Program Files//Cisco Small Business//QuickVPN Client//vpnserver.conf'
Connecting to xx.37.1.xx:60443... connected.
HTTP request sent, awaiting response...
Read error (Unknown error) in headers.
Giving up.

Mail is demanding "a preferred outgoing mail server", but in MAIL; help, it doesn't exist.

I finally got mail working for the first time in three years, but everytime I log in, it pops up an error window over an old message, and says it couldn't be sent because I don't have "a preferred outgoing mail server". Now how would you find out how to set that and fix this? It doesn't exist in preferences, so I clicked open "Help", and searched the phrase; "preferred outgoing mail server". It doesn't exist. Anybody, want to fill this unapple gap?

Do you have a server specified in Preferenes > Accounts?

Problems with outlook 2010 IMAP it says : Mailbox doesn't exist

I have a problem with my outlook at work.
I am currently using Outlook 2010 as IMAP (excuse me for my bad English)
There is 1 Category "Harderwijk" where I can't take any mail in or out.
Whenever i try to put a new mail in the map I get this error: Cannot move items Response from server was: Mailbox doesn't exist. Whenever I try to put a mail out of the Harderwijk map I get this error: Cannot move item, Cannot select map this could be a cause
of the IMAP-Server or the map is possibly deleted or changed.
Can someone help me with this?
I tried to google the answer, but the only responses I saw is that people are going to other mail servers or had to make a new mail. Since this is a bussiness mail we can't afford to lose our e-mails.
So I need a solution without losing all the mails. Thanks in advance.

hi, you can check these two links:
http://www.emaildiscussions.com/showthread.php?p=492312
http://forums.mozillazine.org/viewtopic.php?f=28&t=65807
Regards,
Flynn

Why is Mail asking me for the name of an smtp server for an email address that doesn't exist?

I've migrated from Snow Leopard to Mountain Lion on a new Mac, but in trying to use Mail on ML, it keeps asking me for the name of an smtp server for an email address that's never existed. The addy has my user name correct, but the server part of the address doesn't exist, or at least I've never used an email address with that provider. On ML there's no plist file for Mail, so nothing to delete there. What else can I do to get Mail working? The only other option I have is to abandon Mail as being crippled and useless, and use Postbox, which for it's price (US$9.95) is an attractive option. OTOH, I've paid for Mail after all, so it really ought to work. Any clues as to what I can do to stop its nonsensical behaviour? How do I file a bug report?
TIA.
Pauline

Amasis wrote:
On ML there's no plist file for Mail, so nothing to delete there.
~/Library/Containers/com.apple.mail/Container.plist
(Go to your Finder "Go" menu hold the option key to choose "Library", since the ~/Library is hidden on ML)

Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?

Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?

Hi roddy,
thanks for responding. I read your link, looked at my settings and they were all correct. I tried to do a republish and got this message: The requested URL /childrenandcaring/index.html was not found on this server.
When I type the address in the address bar, I go to the site and the page says: This is the new site childrenandcaring.com
Any other ideas?
Suzanne

Query doesn't exist on server

Hello,
I have issue with workbook.
I have workbook with 5 queries.
I've replaced all 5 queries to another queries and delete old queries from server after saving workbook with new queries.
Now I'm opening workbook, entering login and password and face error:
Requested Query ZFI_M11/ZZFI_M09_Q009 doesn't exist on server.
If I choose Ok nothing happend, workbook wouldn't open.
It's strange, because I couldn't delete query from server, before I've delete it from workbook and technical name of query is strange, it has / symbol.
I tried to create query with ZZFI_M09_Q009 name, but it doesn't help me.
How I can open workbook to fix it?
Regards,
Romano

Hi
If the specified query is not intended to use in that work book, remove / delete the workbook - Query Mapping, then work book would work appropriately.
and If you are using BI7 work book, in design mode of workbook identify which are the BEx objects are accessing the query and correct them to right infoprovider.
In BI7 Workbook - settings you can view the List of Data Providers used in that work book. so you can validate and correct the data provides mapping to respective elements in workbook
If you are using the BW 3.5, check the queries used in Metadata repository and remove the mapping for deleted query from the work book.
Best Wishes,
BVC

Error trying to relate tables "...either doesn't exist or doesn't have a relationship to any table available in the current context"

I have two tables;
The first is my Order table which has a single row for each unique order - there are no duplicate order numbers.The order id column here is called
OrderID.
The second is my Submissions table which is similar to a transactions table, there are multiple submissions for every order. This table also contains an
OrderID column that contains the relevant OrderID.
The submission table also contains a calculated field called Date and a calculated field called
MaxDate field which is the date of the most recent submission that relates to any particular order in cases where there are multipple.
My goal is to add a column to the Order table this MaxDate column. The reason for duplicating the information rather than linking the tables is because I need to create more calculated columns in the
Orders table based on this value.
I have created a relationship between the two tables however when I use:
=RELATED(Submissions[MaxDate]
I get this error:
"...either doesn't exist or doesn't have a relationship to any table available in the current context"
I don't really understand why this would be, because MaxDate definitely exists and contains only numerical values. What is more strange is that if I try and combine the data through a pivot table it actually works! I can create a pivot with OrderID in the first
column and then associate it with MaxDate from the Submissions
table as the value.
Can anyone help me understand what is the problem here?
P.S. if it is useful the formula I'm using to calculate the MaxDate is:
=MAXX(FILTER(Submissions,Submissions[OrderID] = EARLIER(Submissions[OrderID])),[Date])
Thanks.

Maracles, is this still an issue?
Thanks!
Ed Price, SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Oracle not Available, Shared Memory realm doesn't exist

Hi,
I have problem during XE installation on Windows 2003 R2 SP 2 Enterprise edition. I have uninstall the oracle xe and the result still the same. Finally I uninstall the windows and start all over again, surprisingly the result still the same. FYI, we normally has no issue during installation because this is part of our system we sell to our customer which require oracle xe. This is the first time we have seen this issue.
ORA-01034 : Oracle Not available
ORA-27101 : Shared memory realm doesn't exist.
Oracle XE and listener services is started in the windows services.
if we try to do startup the following message occured.
SQL> connect /as sysdba
Connected to an idle instance.
SQL> startup
ORA-44412: XE edition memory parameter invalid or not specified
SQL>
I can send you the oracle_xe log, init ora, and OpsBuildAll.log to create the database.
When we compare with the working installation, we saw that the size of oraclexe folder is less, it's just 233MB while the working one is over 1GB. After investigation, found out that the .dbf files is not avaiable in the oradata folder, i have tried to copy those files from the working one but the problem stay the same, probably there are a lot of files more missing.
Appreciate your help on this.
Thanks,
Agus

Hi,
Please find the log below
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora";
ORA-44412: XE edition memory parameter invalid or not specified
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL> set echo off;
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
declare
ERROR at line 1:
ORA-01034: ORACLE not available
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Connected to an idle instance.
SQL> spool C:\oraclexe\app\oracle\product\10.2.0\server\config\log\cloneDBCreation.log
I have css log as well if you are interesting to see.
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Tue Mar 20 14:13:29 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5308M/6133M, Ph+PgF:7152M/8000M, VA:1933M/2047M
Tue Mar 20 14:13:29 2012
Starting ORACLE instance (normal)
Tue Mar 20 14:13:30 2012
Starting ORACLE instance (normal)
Tue Mar 20 14:13:31 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Tue Mar 20 19:43:31 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5351M/6133M, Ph+PgF:7150M/8000M, VA:1932M/2047M
Tue Mar 20 19:43:31 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Tue Mar 20 19:55:39 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5254M/6133M, Ph+PgF:7052M/8000M, VA:1932M/2047M
Tue Mar 20 19:55:39 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 05:23:41 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5259M/6133M, Ph+PgF:6894M/8000M, VA:1932M/2047M
Wed Mar 21 05:23:41 2012
Starting ORACLE instance (normal)
Wed Mar 21 05:29:12 2012
Starting ORACLE instance (normal)
Wed Mar 21 05:31:42 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 05:50:45 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5143M/6133M, Ph+PgF:6768M/8000M, VA:1932M/2047M
Wed Mar 21 05:50:45 2012
Starting ORACLE instance (normal)
Wed Mar 21 06:02:38 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:04:03 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5205M/6133M, Ph+PgF:6866M/8000M, VA:1944M/2047M
Wed Mar 21 06:04:03 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:06:00 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5195M/6133M, Ph+PgF:6837M/8000M, VA:1944M/2047M
Wed Mar 21 06:06:00 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:06:11 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5195M/6133M, Ph+PgF:6836M/8000M, VA:1944M/2047M
Wed Mar 21 06:06:11 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:06:40 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5191M/6133M, Ph+PgF:6832M/8000M, VA:1944M/2047M
Wed Mar 21 06:06:40 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:07:18 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5191M/6133M, Ph+PgF:6831M/8000M, VA:1932M/2047M
Wed Mar 21 06:07:18 2012
Starting ORACLE instance (normal)
Wed Mar 21 06:07:38 2012
Shutting down instance (abort)
Wed Mar 21 06:07:51 2012
Starting ORACLE instance (normal)
Wed Mar 21 06:13:31 2012
Starting ORACLE instance (normal)
I have finished installing the XE on windows but result is the same, dbf file is not created on oradata folder.
Thanks,
Agus

WRVS4400n, QuickVPN, Server's certificate doesn't exist on local computer

Similar Messages

Maybe you are looking for