WRVS4400N Remote desktop on Vista does not work

I have a WRVS4400N and all firmware, software is up to date and current. I can connect using remote desktop on a laptop with Windows XP Pro but cannot connect with a laptop using Vista Ultimate. I have used the new Quick VPN connect software, but when I try and use the remote desktop connection, it does not connect.
Is there a setting that is different in vista than windows XP that I need to change on the laptop or is it someting in the firewall in the WRVS4400N?

if your RDP is already working on your windows XP computer then there are no settings that needs to be changed on the linksys router, you have to double check the settings of your RDP application on your vista computer, possible that it is using a different port number

Similar Messages

Remote Desktop - The Remote Desktop administrator software does not match the installed client software version.

Hi,
I just upgraded to Mavricks and get this when I try to launch Remote Desktop:
The Remote Desktop administrator software does not match the installed client software version.
I tried removing the application and reinstalling it to no avail. Any suggestions?
Thanks.
-David J. Eisen

Hi coold88!
I have an article for you that addresses your issue:
Remote Desktop 3: How to install Remote Desktop Administrator software after the client software has been updated
http://support.apple.com/kb/HT3596
You will want to make sure you have the latest version of the software as well:
About Apple Remote Desktop 3.7
http://support.apple.com/kb/HT5896
Thanks for using the Apple Support Communities. Have a good one!
-Braden

The Remote Desktop Administrator software does not match......

The Remote Desktop Administrator software does not match the installed Client software version.
The Remote Desktop Administrator software must be upgraded on this computer.
This is the message I have when I installed ARD 3.0 on a new Imac running leopard with no ARD installed previously when I opened up ARD for first time - doesn't let me go any further.
Have I missed something here and made a stupid install mistake??
Many thanks
Message was edited by: art_ik

Please search the discussions before posting as this question has been asked and answered more than once.
If this is ARD 3.x, try this:
• Insert your ARD CD
• Open in Finder
• Right click on the Remote Desktop.mpkg and show contents
• Navigate to contents/installers
• Drag the RemoteDesktopAdmin.pkg file onto the workstation and install
• Run Software Update
• Upgrade to 3.1 admin
Otherwise, you'll have to completely uninstall ARD and then reinstall it. Follow these instructions for the uninstall:
http://docs.info.apple.com/article.html?artnum=108021

Please help! New desktop archive function DOES NOT work!

Am using the new vista Desktop 6.2.1
I have been using Treos for many years, and I often delete and archive address, memo, todo and datebook records. I keep critical archive files for reference and often do refer to old archived records.
HERE IS THE PROBLEM: Whenever I delete and choose to archive an address entry or memo from my Treo and then hotsynch, the desktop hotsync process does not add the deleted records to the appropriate archive files the way it should and the way it has worked for years, in this case address.aba and memopad.mpa - the desktop hotsync process OVERWRITES those archive files. You lose all of your old archived data, anything that was archived is wiped out and replaced with the most recently deleted and archived records
SO for example: I had 20 archived contacts in my address.aba file. I deleted a contact from my Treo and wanted it archived. After the hotsync all 20 archived contacts were gone, the only record in my address.aba file was the most recently deleted and archived record.
I have tested this carefully and many times now with the address and memopad and the same thing happens.
Am I the only one who uses the archive PIM files as valuable references? Can not imagine so, and can not imagine I am the only one who noticed this problem, or the only one it is plaguing.
Can anyone offer an explanation and solution?
Thanks
Post relates to: Treo 700p (Verizon)

I have the same problem. When I "upgraded" from a Treo 650 to a Centro Verizon, it came with Desktop version 6.2.2. The archive function does the same thing when I try to archive my Tasks.
I have gone on Palms Chat service, called their support on the phone several times, sent an email to the Access software public-relations message center, and done everything I can to correct the problem with no success. The Palm support people don't even seem to understand my problem, let alone how to correct it.
One technician told me that Access desktop version 6.2 doesn't work and to go back to version 4.1.4E. That doesn't work either.
Post relates to: Centro (Verizon)

BB desktop for Mac Does not work Curve and G5 OSX 10.5

The RIM software simply does not work very well. I will keep it to update software, but as a product to sync my data between my BB and my 2 macs, it simply does not do what is needed.
Sync did not move the Address Book groups data over. The groups moved to the BB, but the groups were empty. Most of the address book contacts did have the group information in each file, but I could not filter by group as each group was empty. Also, a disturbing number of entries were duplicated, with the duplicated entries missing the group information.
The sync from the iCal application did not seem to go very well either as I received error messages on my Mac.
I am disappointed that RIM would not have a 32 bit version available for OS 10.2 - 10.5 and a 64 bit version for 10.6
I am surprised and disappointed that RIM would release a product with less functionality than the Mark/Space offering, and have a lack of bluetooth syncing.
I have gone back to "The Missing Sync" as that product does work and their support is very good. Unfortunately I had to play around with setting up a test account with no data in iCal and Address Book to zero out the errors that the RIM product put into my BB. I then had to do a second overwrite, this time with my main Mac account and my iCal and Address Book data.
My BB is back to running and syncing, but not on the RIM software.
I hope that RIM will revisit the Mac software and provide a product that answers the needs of the Mac community.

Hey Everyone,
You may find some useful information in this article http://bbry.lv/9y2tHa
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Home page link on desktop Facebook still does not work (pic included)

This does NOT happen in other mobile browsers, only Firefox. Over many Firefox versions on Android, the home link in top left corner of facebook does nothing when tapped/clicked. Same as the "Home" button on the top right. If I click the Facebook button 23 - 30 times, THEN it will load the newsfeed....otherwise it just sits there doing nothing. See the attached image below. What is circled in RED is what does NOT work. Mostly I have to open the link bar and type in the facebook address to load it. Why is this?

I've had this problem since Firefox V.17.0. it bugs having to open the link bar just to have to go to my newsfeed. Mobile site sucks :p

Remote Desktop Virtualization Host does not have a license server

I'm receiving an error when attempting to connect to a virtual desktop that is part of a virtual desktop collection. The server that hosts the virtual desktop collection also hosts a session host collection and the RD licensing server. The event log of the
server issues event 1156 "The Remote Desktop Virtualization Host server does not have a Remote Desktop license server specified. To specify a license server for the Remote Desktop Virtualization Host server, use the RDS module for Windows PowerShell."
The RD Licensing Manager indicates that volume licenses have been installed and are available as seen below. The RD Licensing Diagnoser indicates no issues.
I found a MS blog entry for Windows 2008 R2 that indicates the following: "Because there is no GUI interface for specifying licensing configuration on an RD Virtualization Host server, support has been provided in Windows PowerShell to enable this scenario.
As a result, a VDI administrator who does not want the (RemoteFX-enabled) RD Virtualization Host server’s licensing settings to be
centrally managed (from the RD Connection Broker server) can manually configure these settings on the RD Virtualization Host server(s) in the VDI deployment by using the following Windows PowerShell cmdlets:", but I'm not sure if this applies to Windows
2012 as well.
Thanks.
Dale
Dale Smith

Hi Dale,
Based on my research, please try to use this PowerShell command to set the RD licensing server.
Set-RDLicenseConfiguration -LicenseServer
Server FQDN -Mode PerUser
Set-RDLicenseConfiguration
http://technet.microsoft.com/en-us/library/jj215465.aspx
Also, please note that the RDVH server must be a member of a VDI collection.
Hope this helps.
Jeremy Wu
TechNet Community Support

Remote Desktop Client software does not match

hello,
I run ARD 3 as administrator and just swapped machines by using Migration Tool. Now my ARD on the new machine tells me that "The Remote Desktop Client software on this computer does not match the Administrator software version. the Remote Desktop Administrator software requires a newer version of the client software"
how do i accomplish this?
thanks in advance

Sounds like the new machine might still have version 2.2 client? So download and install the newest client, if that fails follow the instructions Apple has for removing ARD (kb #108021) and wipe out everything, then it shouldn't balk. Although there is a setup bug, where if you update a client machine to 3.1 but then try and install the ARD 3.0 CD it will complain and quit! Following kb #108021 wil allow you to install (or go into the actual mpkg and install the individual .pkg file) but doing this made me wonder if I was missing out on some postflight script that does something useful... so I didn't try and make force it. Just make it happy with an ARD lobotomy, then reinstall :/

"Set the Desktop Picture" command does not work in certain instances

I've decided to take a try at using automator. Anyways I've created a very simple workflow.
Get Specified Finder Items (points to an image file)
Set the Desktop Picture
Now this usually works when the desktop is set statically to a specified image. But when I set the desktop to change the picture periodically, the automator action fails to change the picture to the specified image, when executed.
Is this a bug? Is there any workaround for this?

Your workflow actually is changing the static desktop picture, it's merely failing to then switch off the "Change picture" feature.
The "Change picture" feature has a somewhat misleading name in that it's not actually changing your static desktop picture at all. Your static desktop picture remains in place as a new dynamic picture layer is continually drawn and redrawn directly on top of it.
I don't see any way of testing for or turning off the desktop slideshow automatically, short of writing a GUI AppleScript that opens System Preferences and clicks through to the relevant toggle setting. If you file feedback with Apple they might take a look at it.
http://apple.com/feedback/

Home link in upper left corner of Desktop Facebook site does NOT work. Will not go to Newsfeed

Pressing the "Facebook" logo in top left corner will not work most of the time. The newsfeed does work..but let me explain this a little better. Say, I'm on a friends facebook page using the full site...I want to go to my newsfeed so I click the "Facebook" logo in the left hand corner next to the notification icons....poof....nothing happens, except, I notice the little padlock on the left side of the address bar disappear. I can let it sit and it will never do anything. If I press the facebook logo about 15 times, then it will finally load the newsfeed. It seems like some kind of issue going from secured to unsecured pages. It does not do this when I am in one of my groups though...odd. I have always had to use the addeess bar to go back to the newsfeed . This problem has existed through many versions of Firefox. No other browser does this.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
The Firefox cache temporarily stores images, scripts, and other parts of websites while you are browsing. <br>
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies, do the following:
#Tap the menu icon located at the top right corner. This is the icon with 3 bars. On older Android devices you'll have to press the hardware menu key and then tap More.
#Tap '''Settings'''.
#After that, you will be taken to the settings screen. In the settings screen, look under the section '''''Privacy & Security''''' and select '''Clear private data'''.
#You will then be taken to a list of what can be cleared. Select the following 2 for deletion:
#*Cookies & active logins
#*Cache
#After those have been selected, tap the '''Clear data''' button to actually clear the cache and cookies.
Did this help you with your problems? Please let us know!

Solution for PS CS3 installation problem on Vista does not work.

I encountered the much discussed 2739 error when trying to install PS CS3 on Vista Ultimate. I followed the proposed solution. But instead of a dialog box I received the message: not recognized. I have the latest update of Java installed and I have IE as my default browser.
What now? Return CS3?

I did and got a friendly guy who apparently had never heard of the 2739 error. I was hoping to get some support here. In another thread I read something about holding the installation window until installation starts. I can try it, but I doubt I am quick enough before the error window opens.

Desktop Manager/PocketMac does not work

All I want to do is put some music and pictures onto my 8900? What can I do to get the software to work on my Mac. I put the CD in and I plug up my phone...the icon pops on my desktop but when I click it a blank white screen appears and never loads. Then I dl'ed pocketmac, it opens, I try to sync, then it says error.
Please help!

Check the link below:
http://na.blackberry.com/eng/services/desktop/mac.jsp
Follow instructions on that page and install the necessary software on your Mac.

Tx2525nr upgraded to windows 7 and now f11 recovery to vista does not work

im new here and i hope to get any answers from my problem on this laptop. i owned a hptx2525nr and recently upgraded to windows 7, now i wanted to go back to vista but upon pressing f11 (the original recovery on hard drive), nothing happens. "f11 system recovery" is listed on the lower left but thats it. it continues to load windows 7. I hope people around here can help me.

Hi, I got absolutely the same problem too!!!

The remote does not work, when i turn the tv on I see the apple tv and the itune icon on the screen

the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.

Did you do a software update?
AppleTV is unable to start properly. You need to connect to a computer running iTunes as detailed here:
Apple TV (2nd and 3rd generation): Restoring your Apple TV

Just upgraded to iPhoto 11. slideshow does not work. just is black.

I just upgraded to iPhoto 11. I am on a MacPro desktop.
Slideshow does not work for either the existing slideshows or to create new one.
Just a black screen. When you click on the slideshow button it fades for a microsecond like it is going to go to slideshow...but then just a black box where teh photo should be.

Can you view the photos normally at full size?
Regards
TD

WRVS4400N Remote desktop on Vista does not work

Similar Messages

Maybe you are looking for