WRVS4400N - syslog / local log not working ?

I have tried everytihng I can think of - I am running v2.0.0.8 and have enabled all sorts of log options, syslog, smtp etc. The only thing I can get in my log is level 4 warnings, but I need to see all traffic. Any ideas ?

To report bugs to apple:
http://www.apple.com/feedback/macosx.html

Similar Messages

Oracle 10gr2 locally is not working after installing Oracle 11g

hi ,
Does anyone has any idea after installing oracle 11g in system, Oracle 10g locally is not working. I am getting below error.
Forms session <2> failed during startup: no response from runtime process

Generally this is because the software you install last updates the system environment variables with its information, thereby break products that use files with similar names. Specifically, look at PATH and ORACLE_HOME. Likely you will see that entries for your 11g installation will be displayed first. In order to use v10, you would need to change this or use script files to start executibles. For Forms runtime, be sure to properly set default.env to point to the desired PATH

Local Printer not working via Remote Link

I have a problem with my remote desktop printing to my local printer. I connect via RD on Windows 7 Home to Windows 7 Pro. I have installed an HP Laserjet Pro CM1415fn printer. All prints fine locally. Also everything printed fine
but have had to have a recent update to my Remote PC that I log into. So the printer had to be reinstalled.
All worked ok for about 6 print jobs then stopped working. Nothing has changed. I have changed the settings on the printer as it seemed to be when the printer went into 'Sleep' mode. I have tried restarting the Printer Spooler in Services
and rebooting the remote PC but no joy.
Any ideas please.

Hi,
You mean after the reinstallation, the local printer worked for a while and then stopped working with nothing changed?
Take a try with the printer troubleshooter:
Open the Printer troubleshooter
Also see if the below thread could help:
Local Printing with
Remote Desktop not working: Windows 7 Pro 32-bit & MS Server 2003
Best regards
Michael Shao
TechNet Community Support

Logging not working in RH Linux (ALUI portal 6.1MP1)

Hi,
we've installed the ALUI portal 6.1MP1 on a RedHat Enterprise Linux 4, and the logging does not seem to be working - PTSpy does not show anything.
We've also installed the same portal version on a couple of Windows machines - there the logging works fine.
Any ideas on where to look for possible causes?

fwiw, I recently installed ALUI 6.1 MP1 on RHEL 4 Update 3 and was able to have both the Spy Logger and the consolelogger working locally on the RHEL console (running GNOME).
I then tried to access the RHEL virtual machine from my host Windows OS where I access things via Cygwin (startx) and Putty (SSH). Spy Logger still does not work (because of the SWT issues I mentioned earlier) but consolelogger works fine.
If you are still having issues I'd encourage you to open a case with tech Support.
john

LMS 3.2 - Syslog Config fetch not working

Hello,
the syslog config fetch on my LMS 3.2 with RME 4.3.0 is not working.
I get syslog messages from devices and the count in the syslog collector status is okay.
But in the syslog message summary in device center the count is not getting higher with every message.
And the config fetch is not working.
I changed the logging level in the collector-properties to "debug" and got the following messages for a device which I want to fetch:
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, FcssEmblemProcessor - About to process the syslog string : Jun 07 14:40:23 10.155.224.102 53: Jun 7 14:39:57: %SYS-5-CONFIG_I: Configured from console by shru1307 on vty0 (4.26.16.20)
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parser : com.cisco.nm.rmeng.fcss.common.FcssEmblemAFormatParser@13bd574
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parser : com.cisco.nm.rmeng.fcss.common.FcssEmblemBFormatParser@13adc56
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parser : com.cisco.nm.rmeng.fcss.common.FcssGenericFormatParser@157aa53
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parser : com.cisco.nm.rmeng.fcss.common.CSSSyslogFormatParser@6f50a8
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, EmblemA not valid.
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, EmblemB not valid.
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, EmblemA valid.
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Setting daemon date
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, After adjusting the offset Mon Jun 07 14:40:23 CEST 2010 GMT 7 Jun 2010 12:40:23 GMT
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parsed using the parser : com.cisco.nm.rmeng.fcss.common.FcssGenericFormatParser@157aa53
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, FcssEmblemProcessor - Valid EMBLEM format. Passing on...
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Converted syslog to filter string. Filter string is 10.155.224.102;;;SYS-5-CONFIG_I: Configured from console by shru1307 on vty0 (4.26.16.20)
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, ^((10\.161\.1\.45);;;(\S+)(-(\S+))?-(.*)(-(.*\s*))?\s*:\s*.*)$
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, FcssFilterPatternSet- inside 6
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, getInterestedSubscribers() - Incrementing filtered count for HNW2K3CISCO03
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, getInterestedSubscribers() - No interested subscribers. Returning null.
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Entered zero size
I attached the AnalyzerDebug.log, syslog_debug.log, SyslogAnalyzer.log and SyslogCollector.log for further informations.
Thanks for any advice!
Sven

After I restarted the processes the syslog queue is empty and the config fetch works :-)
Output from syslog.log:
Jun 15 09:37:51 4.72.80.13 3131: Jun 15 09:36:59.881: %SYS-5-CONFIG_I: Configured from console by shru1307 on vty0 (4.26.16.20)
Output from AnalyzerDebug.log:
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,74,Invoking Config collection for syslog message
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,81,Before triggering syslog config fetch
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,83,Syslog Timestamp Tue Jun 15 09:37:51 CEST 2010
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,85,DCMA Endtime String 2010-06-10 00:51:02.94
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,90,DCMA Endtime String after formatting Thu Jun 10 00:51:02 CEST 2010
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,98,Buffer Time after adding 5 minutes Thu Jun 10 00:56:02 CEST 2010
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,101,Triggering fetch on syslog since Timestamp > bufferTime
My last question is now, what can I do that the syslog queue will not getting full one more time?
Is logrot a solution? My syslog.log will be rotated at 128 MB.
Thanks a lot!
Sven

Logging Not Working in Java Code

Hi everyone,
I'm looking into the Java code for the Portal app, and I'm trying to do some debugging as to what's going on. I see a lot of the Adobe classes use the log4j Logger to output general logging information as well as errors, but there never seems to be any output in the log files. The files I'm checking for activity are:
Adobe LiveCycle ES2\jboss\server\lc_turnkey\log\server.log
Adobe LiveCycle ES2\jboss\bin\correspondencemanagement.log
When I build and deploy the application onto the LC server, just before my application starts I get the following line in the server.log:
2011-04-29 14:30:49,055 INFO [STDOUT] **** No servlet context set in ServletLogTarget - logging disabled.
followed by a message saying that my application has started. The line above happens everytime I re-deploy the application (without actually running the app), right before it starts, so I'm assuming that it is directly related to my application.
The only 'com.adobe' related logging lines that happen in the correspondencemanagement.log file are written when I physically run the app, and I get the following line:
2011-04-29 14:31:34,298 69729 INFO [com.adobe.dct.service.impl.DataDictionaryRegistryServiceImpl] Fetching Complete Data Dictionary object graph.
Looking into the code for the com.adobe.dct.service.impl.DataDictionaryRegistryServiceImpl class, I see it uses a completely different logging system (ie not log4j).
*sigh*
I've changed the services-config.xml file and tried setting the logging target to both flex.messaging.log.ServletLogTarget and flex.messaging.log.ConsoleTarget, but neither seem to make a difference.
I must be missing some kind of configuration to get the logging to work correctly, but Google has been little help as well.
Hopefully someone has crossed this issue before, and has a solution? Any help / pointers / advice etc welcome and appreciated!!!
Thanks,
Kristian

Thanks for the reply Saket.
It turns out that the logging was working correctly all along. The messages I could not find were all related to bootstrap code. I was assuming that the bootstrapper would run each time the application was deployed, or at the very least each time the server was started. It turns out that you manually need to run the bootstrapper. So I was looking for log lines that would never appear by themselves. Once I manually ran the bootstrap process, the log lines ran as expected.
Cheers,
K.

Absolute links on hml page in local directory not working

All the absolute links on my html pages (which are on my hardrive) are being treated as local links and are therefore not working - i.e. Firefox is adding the local file path before the url. For example, the original link is: http://www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article
But Firefox is adding the directory path so the url string becomes: /www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article%E2%80%9D
It is also being appended with: %E2%80%9D (which, when tested from a Word page, leads to site but generates page not found error).
For testing purposes, is there any way I can reconfigure Firefox to parse my links as absolute?
Many thanks

Thanks, both. I have carried out cor-el's suggestion of replacing the smart quotes with dumb quotes, then tried viewing link on file again using different encoading, including UTF-16 - same result as before.
Below I've set the HTML of the whole page, as per yalam96's request (it includes cor-el's suggested fix to the "prosecute" link):
<pre><nowiki><h3>Who do you need to inform (in the UK)?</h3>
If you have a mortgage, you will need to inform your provider (with most lenders this shouldn't be an issue – you do not need “consent to let” as you would if you were letting out the whole property) but you do still need to inform them; why? This is partly for the protection of your lodger, if you should default on the mortgage or die, but mostly for your own protection – if the property was destroyed or badly damaged because of the negligence of your lodger.
If own your property and it's leasehold, check the lease – you may need permission from the freeholder.
If you rent your property, you will need to firstly check with your landlord (this applies whether you rent privately or from a public landlord – Local Authority or Housing Association), and get their permission in writing, just as you would with a mortgage provider. Incidently, in the UK, a public landlord is only likely to object to the let if moving a lodger in would mean your home becomes over crowded (e.g. you have a two bed flat and your children would have to share your bedroom). They will also object – they might even <a href=”http://www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article">prosecute</a> - if you move out and let the whole property to the “lodger” (who wouldn't be a lodger in that case, but a full tenant, with full tenant's rights).
You may also need to cancel any existing residential home insurance and take out <a href=”http://www.landlordinsurance.biz/landlord-insurance-guides/landlord-insurance-faq/”>landlord insurance</a>. A few residential policies will, however, allow lodgers. Landlord insurance will not cover the lodger's possessions, they will need to get their own insurance, known as Tenant Insurance – policies can be compared on sites such as <a href=”http://www.confused.com/campaign/home-insurance/tenants-content-insurance?MediaCode=1054&kw=lodger+contents+insurance+broad&gclid=CPbbn9-Nj7MCFanItAod3GAAog”>confused.com</a>
If you get a single occupier's discount on your council tax, you will need to inform your local authority, unless your lodger is <a href=”https://www.gov.uk/council-tax/council-tax-exemptions”>exempt</a> from paying council tax (e.g. they're a university student).
NB People claiming Jobseeker's Allowance and most other benefit claimants are not exempt – they are, however, usually entitled to Council Tax Benefit to help with some or all the cost of their council tax.
If you're letting on a Monday – Friday basis (to someone who only needs a week night let), this person would not normally pay council tax at your property, as they already pay against their main (family) home. However, if for whatever reason you and your Monday – Friday lodger decided that they would use your address as their main home, they would then become liable to pay council tax at your address and you would lose any single occupier's discount.
If you claim any kind of means tested benefit (such as job seeker's allowance, housing benefit or council tax benefit) as benefit rules currently stand (January 2013) your rental income will affect this. Contribution based Job Seeker's allowance (JSA(C)) will be affected if your weekly rental income exceeds £50. If you're on income based jobseeker's allowance (JSA(I)), it's very likely to be affected; however, to what extent will depend on your rental earnings and circumstances and a DWP adjudicator will decide this.
However, from October 2013, when Universal Credit takes effect in the UK, <a href=”http://www.insidehousing.co.uk/tenancies/lodger-rules-to-ease-impact-of-bedroom-tax/6522846.article?MsgId=57059”>a public housing tenant's income from renting a room will no longer affect their benefit entitlement.</a></nowiki></pre>

Maverick Local Host Not Working Correctly

Hello,
I recently upgraded to Maverick 10.9.2. Now my local host is working incorrectly? Now when I try to access one of my sites on my local machine, it just shows the php code and not loading the pages? I also restored httpd.conf~previous to httpd.conf, and still the same issue?
Also
* Web sharing is on
*PHP is enabled
*Mysql is running
Did I mis something?
Thanks JR

Hello,
I recently upgraded to Maverick 10.9.2. Now my local host is working incorrectly? Now when I try to access one of my sites on my local machine, it just shows the php code and not loading the pages? I also restored httpd.conf~previous to httpd.conf, and still the same issue?
Also
* Web sharing is on
*PHP is enabled
*Mysql is running
Did I mis something?
Thanks JR

Logging Not Working?

For some reason i cant get the logging to work on weblogic, although it was working the other day. Im going mad with this problem as the code is some simple. In an EJB i basically do this...
serverLogger = LoggingHelper.getServerLogger();
serverLogger.log(Level.Info, "WORKING");
But it does not appear in the logs on weblogic admin, i have put in checks for null pointers, exceptions, everything but still i see no logs.
The other day the servers crashed out with an error about a cyclic queue being full, which i have since traced to the shared capacity for work managers being full. Could this be related? Do i need to do something else to force the log message, i.e. flush() or something similar.
Thanks.

Chris, here's the code, read it and dispair at my works!
package org.acme;
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import weblogic.ejbgen.*;
import java.util.logging.Logger;
import java.util.logging.Handler;
import weblogic.logging.LoggingHelper;
import weblogic.logging.WLLevel;
@FileGeneration(remoteClass = Constants.Bool.TRUE,
localHome = Constants.Bool.FALSE,
remoteHome = Constants.Bool.TRUE,
remoteClassName = "Hello",
remoteHomeName = "HelloHome",
localClass = Constants.Bool.FALSE)
@JarSettings(ejbClientJar = "hello_client.jar")
@JndiName(remote = "HelloHome")
@Session(maxBeansInFreePool = "1000",
initialBeansInFreePool = "0",
transTimeoutSeconds = "0",
type = Session.SessionType.STATELESS,
defaultTransaction = Constants.TransactionAttribute.REQUIRED,
ejbName = "statelessSession",
enableCallByReference = Constants.Bool.TRUE)
public class HelloBean implements SessionBean {
private SessionContext ctx;
private Logger serverLogger = LoggingHelper.getServerLogger();
// You might also consider using WebLogic's log service
private void log(String s) {
Handler[] handlerArray = serverLogger.getHandlers();
for (int i=0; i < handlerArray.length; i++) {
Handler h = handlerArray;
h.setLevel(WLLevel.INFO);
serverLogger.log(WLLevel.INFO, s);
* This method is required by the EJB Specification,
* but is not used by this example.
public void ejbActivate() {
log("ejbActivate called");
* This method is required by the EJB Specification,
* but is not used by this example.
public void ejbRemove() {
log("ejbRemove called");
* This method is required by the EJB Specification,
* but is not used by this example.
public void ejbPassivate() {
log("ejbPassivate called");
* Sets the session context.
* @param ctx SessionContext Context for session
public void setSessionContext(SessionContext ctx) {
log("setSessionContext called");
this.ctx = ctx;
* This method corresponds to the create method in the home interface.
* @exception javax.ejb.CreateException if there is
* a communications or systems failure
* @see org.acme.HelloBean
public void ejbCreate () throws CreateException {
log("ejbCreate called");
@RemoteMethod()
public void sayHello() {
log("Hello");

NAC appliance local authentication not working

Hi,
i am trying a test scenario for NAC. it is oob virtual gateway
I get the login page when i try to access the web but when i try to authenticate to the local db i don;t receive an error message and i remain on the authentication screen.
I listened with tcpdump on both interfaces. on the untrusted side i see traffic but on the trusted side no diffrence in traffic appears(but maybe this is normal)
can someone please help with the detailed steps the authentication follows
not just host->nas->nam(localdb)
or some ideas
Thank you!

I doubt this will help, but here goes. I seem to remember a similar issue here, and I went into my browser's proxy settings and turned them off. Then I could authenticate, but not browse the web. So after authenticating I turned them back on and it was fine. There is a tab on the NAC Device Management > Clean Access Servers > >Advanced> Proxy where you can tell clean access about a proxy server, but I don't know if that's relevant.
I assume you have verified that your local user ID works by testing the auth server with it and that it has a profile that allows you to go someplace.

Logs filled up circular logging not working

hey. i have exchange 2010 with dag and logs filled up and shut down database. i remove some logs according to old date then i turn on circular logging. But still not logs shrinking but only growing. i move more logs now. how come
circular loggins not work? i dismount and remount already. thank you in advace.
EC David

EC,
Do you have time to just run a full backup?
The reason why the circular logging is not working is because you need to break the DAG. Dismount the passive copy, remove the copy then dismount the active. Once you remount the circular logging should work. Once that is done you Or you
can just run a full backup if you have the time to let the logs truncate from that. Either way you will have to run a backup. Actually, why don't you just run a full backup?
Oh, if you go that route, don't forget to reseed the database. I hope you can just do a full backup.
S

Local printers not working with 2504 WLC

                   I have a 2504 WLC with 3 1262 WAPs in lightweight mode.
     Clients connect using WPA2 PSK AES with no problem. Clients are Windows XP Home SP3. Test pages end up in print queue and eventually get a error printing status. Clients are not part of a domain and in a standalone workgroup - techstream.
Printer can be pinged from wireless client.
Another 1262N WAP in standalone mode connected to same lan from windows 7 sp1 clients have no problem printing to a local printer.
What does work on the Windows XP Home client is connecting to a network shared printer authenticating with domain admin id and password and it works. Reboot and the network shared printer can not connect multiple reasons are "access is denied" and message box says "only security tab will be displayed....."   Another Windows XP Home SP3 client on reboot can't open the network shared printer with message "Can't find printer"
The local printers do work on these pc's with an old colubris router that has an outside interface on our lan and internal network with clients getting dhcp address from colubris router of 192.168.3.XXX .
What is wrong with the wireless 2504 WLC?
Thanks
Broadcast forwarding was enabled.

Although a cisco tech support was helpful in making sure multicasting was enabled and a multicast server defined, the problem was at the CP2025DN printer. It had old network ip mask and gateway configured on the printer.
The new devices were part of the new network configuration (Mask and gateway had changed). I didn’t change that printer when I changed all the other printers at the facility because it was still active thru the old wireless network. I forgot to change the printer ip config when I brought the new wap on the new wireless network with the wlc 2504.
End result was the clients were part of a different subnet and gateway configuration then the printer and this disrupted the communication between clients and the printer. Once I corrected the mask and gateway on the printer to be the same as the dhcp scope of the wireless network, communication and printing worked.
Problem solved. User error

Signed applet on local filesystem not working anymore

Hi,
Everyone knows that accessing local file system has always been a security threat.
But clients are our bread and butter.
Our clients have asked for web app consisting in a zip file, downloaded, containing an html page with dynamic content and links to many pdf.
So far, so good: i download my zip unzip it, access my pdfs, and once every pdfs have been modified, i click on a button that is from a signed applet, and the applet checks which pdfs have changed, and post the files to a web service on a server....Et voilà.
It's been working for at least 5 years like that.
But now my clients are updating to jre 7u45.
And as A LOT OF PEOPLE HERE....my applet won't load and work if i compile it with the new sdk....: i get the InvocationTargetException...exception
Is there an easy way to , step by step, compile , sign and yadi yada...and make it work.
I mean my applet has always did its job..., nothing will change in the code...it's only the annoying changing everything without warning.....
Anyone whould have an alternate approach instead of applet (my guess is NO).....: but nowadays with an applet you program 5 hours and you deploy 10 days.

I have the same issue here and it is not working anymore with auto-signed certificate too
I am going to stop using Safari if that , all is working fine with Chrome Firefox and Opera
Apple says
As a good security practice, you should validate PGP keys you receive, and not trust keys that cannot be validated. Information to validate the Apple Product Security PGP Key is available from
Maybe but this is my problem and if I want to trust anyway I must use another browser

Local snapshots not working

I've read Pondini's articles on this but I still can't work out why Time Machine isn't creating local snapshots of my machine. I have 72GB of 500GB free on my HDD which is definitely over the 10% threshold needed for local snapshots to work (I think) so I don't know why it isn't working.
Any suggestions or help would be very much appreciated.
Thanks!

Linc Davis wrote:
When the disk’s free space is less than 20% of its total available space, Time Machine removes snapshots starting with the oldest one first, and working toward the newest one. If enough space becomes free so that the disk’s free space is more than 20% of its total available space, Time Machine stops removing snapshots.
If the disk’s free space falls below 10% of its total available space, or is less than 5 GB, the task of removing snapshots will be given high priority on your Mac. When free space is between 10%–20% of total available space, removal continues at a lower priority.
If Time Machine is unable to free up enough space to get above the 10% or 5 GB threshold, Time Machine removes all snapshots except the current one, and stops creating new snapshots. Once free space rises above the 10% / 5 GB threshold, a new snapshot is created, and the previous one is removed.
That wording is inconsistent, and is also repeated in the Help. Part of it is left over from early Lion seeds, when the threshold was 20% for small volumes and 10% for larger ones. Bug reports have been filed to get it corrected, but so far there's been no response.
* The first paragraph says snapshots will be removed until there's 20% free.
* The second paragraph says that between 10% and 20%, removal will continue.
* The third paragraph, however, says the threshold is 10% or 5 GB.

Captivate 5 - links are working locally but not working on server - urgent please

Hi, I'd really appreciate your quick help !
I have created a landing page in captivate 5 which has links to the different lessons - also done in captivate. all exported as swf and html.
I've used 'Open URL or file' and chose 'new' to open them in a new window, and unchecked the checkbox that says 'continue playing the project'.
on my computer after publishing, the project works just fine. when i've uploaded it to my server, the external links to the different lessons are not working.
PLEASE urgen assistant - is very much appreciated.
my files are btw in dropbox, if one of u has a moment to look at it.
Thanks!

Rick, I have a weird problem now.
my files sometimes load and sometimes don't!
when I place the url on the current webpage (where the index is) - the files load.
when i click them from the index file, a new window opens up but the files don't load.
this behavior is not consistent. a few hours ago it did work.
any ideas???

WRVS4400N - syslog / local log not working ?

Similar Messages

Maybe you are looking for