WRVS4400N V2 and Intel 5300 AGN can't connect at N speeds

Hi,
I have a Dell Latitude E6500 with the Intel WiFi Link 5300 AGN adapter. I cannot get it to connect to my WRVS4400N V2 at anything higher than 54 Mbps. I have downloaded the latest driver from Intel and N mode is enabled. Has anyone else managed to get these two to work together?
Thanks in advance.

I am having the same problem as kirksaban. I have an HP EliteBook 8530p with an Intel 5300 AGN. It can detect my WiFi network from the WRVS4400N is 802.11n, but it will only connect at 802.11g speeds. We have both an older and newer MacBook Pro that both can connect faster than 54 Mbps, but the HP will not. I checked the product brief on Intel's site and it claims the 5300 AGN will operate at both 2.4 GHz and 5.0 GHz (I will try to paste URLs below). Where did you find it would only operate at 5.0 GHz? Are we sure the band on the 5300 AGN is the problem?
http://www.intel.com/network/connectivity/products/wireless/adapters/5000/index.htm
http://download.intel.com/network/connectivity/products/wireless/319982.pdf

Similar Messages

I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

You would get better response from the iTunes community forum.
Have a nice day!

TS1814 I had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W.

TS1702 i downloaded the GV app to my iphone but i'm trying to set up the app and it says it can't connect to google when i try to sign in to my google account.... any ideas what's wrong? i can access my gmail account just fine with my gmail app on the sam

i downloaded the GV app to my iphone but i'm trying to set up the app and it says it can't connect to google when i try to sign in to my google account.... any ideas what's wrong? i can access my gmail account just fine with my gmail app on the same phone

What's a GV app?

I can detect my Bluetooth devices using a BLE scanner and it says they can be connected but - My 5S will not pair with these devices

I can detect my Bluetooth devices using a BLE scanner and it says they can be connected but - My 5S will not pair with these devices

What devices?
Iphoen supports bluetooth for stereo headsets/speakers, handsfree telephone devices, some keyboards, some apps from the app store and interenet tethering if provided by your carrier.
It does not connect to computers, other phones,etc.

HT1338 I have a MBA and although I have a broadband connection, the internet speed in the MBA is pathetic. I even can't open a normal song in Youtube in half an hour, so please help !

I have a MBA and although I have a broadband connection, the internet speed in the MBA is pathetic. I even can't open a normal song in Youtube in half an hour, so please help !

Has the speed ever been acceptable, or is this something new? Try resetting Safari and perhaps rebooting your router.

Intel 5100 AGN replacement with an Intel 5300 AGN

I have an Intel WiFi 5100 and I was told to purchase a 5300 card as a replacement. The laptop starts, but stops and tells me that there is unregistered hardware trying to start and windows will stop it immediatley. HOW DO I INSTALL THE NEW DRIVERS for a presplash screen in windows 7?

I have an HP Pavilion DV7-2185dx and the Intel website was the one who directed me to the 5300 saying it was more stable and even though the third antenna connection would be open, the performance would more than make up for the lose of the WiFi extentended distance. AND just so you know: This network adapter had been working fine for years and years with little or no issues, then about 6 months ago it started to act up, dropping the signal and just working slowly. I tried, but was unsucecessful in downloading and installing the up to the minute drivers for this 5100. And finally, this is the mindblower: The card works extremely and without fault under the Ubuntu OS. I switched from W7 to U11 with the dual boot and NO ISSUES! SO, I believe it is something that MS has done with their many, many updates that come over constantly. They must have updated something else and screwed up the Intel drivers. If you look online, you will see hundreds of people with the same or similar issues that remain unresolved since 2011, with the only resolution being the use of a USB Network Key, of which I always had as a backup and troubleshooting device. So, before you look to chastise me for listening to an Intel tech, perhaps you should read the thousands of angry customers who have had their NIC go bad and HP and Intel have NO **bleep** ANSWER!!! Some crap, to say the least... PS...As I said the card works WONDERFULLY using UBUNTU 11, so I don't believe it is the card, but rather the software that is controlling it.

[SOLVED] Intel 7260 Vaio can't connect to wifi

Hi there,
First off, I should mention that I know my way around Linux but I'm pretty new to Arch, so there might be things that I know that don't apply here.
So, I have this problem with this network, I can't connect to it and frankly I don't know why. I was on Ubuntu until a few days ago and I still had the problem. I posted on the Ubuntu forum >>here<< and I was told to upgrade, but as I've been willing to move to Arch for quite some time, I thought that was maybe the time. BUT, the problem is still there, which worries me.
To sum it up, about one or two weeks ago, I was connecting fine to this network (ZyXEL) and then after a reboot, no way to connect to it, no matter what I try. I have noticed an error message that keeps coming back all the time (see below) and the wifi indicator in i3status sometimes flashes me with an IP while I'm trying to connect then eventually the network disappears (not with wicd, only nm). Those are basically the symptoms.
$ dmesg | grep iwlwifi
[ 1.194191] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
[ 1.194323] iwlwifi 0000:01:00.0: irq 61 for MSI/MSI-X
[ 1.267714] iwlwifi 0000:01:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[ 1.284399] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[ 1.284446] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1.284661] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 2.896518] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 2.896733] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 35.768085] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 35.768302] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 35.793332] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 35.793549] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 38.129138] iwlwifi 0000:01:00.0: No association and the time event is over already...
[ 71.084001] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 71.084217] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 118.185693] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 118.185910] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 118.209937] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 118.210144] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 124.174397] iwlwifi 0000:01:00.0: No association and the time event is over already...
[ 153.151555] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 153.151772] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 165.160036] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 165.160253] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1340.258296] iwlwifi 0000:01:00.0: irq 61 for MSI/MSI-X
[ 1340.258601] iwlwifi 0000:01:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[ 1340.270580] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[ 1340.270628] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1340.270841] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1347.384442] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1347.384657] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1353.661509] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1353.661719] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1353.799948] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1353.800167] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1356.145940] iwlwifi 0000:01:00.0: No association and the time event is over already...
[ 1380.497704] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1380.497933] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
I have had troubles with the wifi in the past (from what I read on the internet, this card is not yet fully supported everywhere) but nothing like this. Usually, disconnecting and reconnecting did the trick, sometimes I had to restart NetworkManager in extreme cases, but nothing more.
I tried a lot of things (modprobe, rfkill, firmware update, etc), rebooted everything I could but couldn't do anything. I have found bug reports and forums posts of similar problems but the solutions there either didn't work for me or the problem just seem to have disappeared for some people. I read that this card was not really supported before the kernel 3.11 or 3.13 but now I have 3.16 and it's still there. What's really bugging me is that I could successfully connect to this network a couple weeks ago...
On the Ubuntu forum, they have a script that displays useful information when posting about wireless problems. I have taken off the Ubuntu specific bits and I think this will save you some time asking me to run commands. One thing is not mentioned in the script: I use wicd.
########## wireless info START ##########
Report from: 17 Oct 2014 18:59 UTC +0000
Booted last: 17 Oct 2014 00:00 UTC +0000
Script from: 20 Sep 2014 23:04 UTC +0000
##### kernel ############################
Linux 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64 unknown unknown GNU/Linux
Parameters: rw, quiet
##### lspci #############################
01:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev 6b)
Subsystem: Intel Corporation Dual Band Wireless-N 7260 [8086:c060]
Kernel driver in use: iwlwifi
##### lsusb #############################
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 8087:07dc Intel Corp.
Bus 002 Device 002: ID 0bda:5727 Realtek Semiconductor Corp.
Bus 002 Device 005: ID 18d1:4ee3 Google Inc. Nexus 4 (tether)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: sony-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
1: sony-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: nfc0: NFC
Soft blocked: no
Hard blocked: no
3: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
4: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
##### lsmod #############################
iwlmvm 161824 0
led_class 12859 1 iwlmvm
mac80211 514630 1 iwlmvm
iwlwifi 156837 1 iwlmvm
cfg80211 454161 3 iwlwifi,mac80211,iwlmvm
rfkill 18867 4 nfc,cfg80211,sony_laptop,bluetooth
##### ifconfig ##########################
enp0s20u2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.42.23 netmask 255.255.255.0 broadcast 192.168.42.255
inet6 fe80::744f:54ff:febd:2e32 prefixlen 64 scopeid 0x20<link>
ether <MAC address> txqueuelen 1000 (Ethernet)
RX packets 33475 bytes 45223932 (43.1 MiB)
RX errors 1 dropped 0 overruns 0 frame 1
TX packets 20285 bytes 2774716 (2.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 44 bytes 2200 (2.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 44 bytes 2200 (2.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp1s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether <MAC address> txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5 bytes 876 (876.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
##### iwconfig ##########################
lo no wireless extensions.
enp0s20u2 no wireless extensions.
wlp1s0 IEEE 802.11abg ESSID:off/any
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
Tx-Power=22 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off
##### route #############################
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.42.129 0.0.0.0 UG 203 0 0 enp0s20u2
192.168.42.0 0.0.0.0 255.255.255.0 U 203 0 0 enp0s20u2
##### resolv.conf #######################
nameserver 192.168.42.129
##### iw reg get ########################
country 00: DFS-UNSET
(2402 - 2472 @ 40), (6, 20)
(2457 - 2482 @ 40), (6, 20), PASSIVE-SCAN
(2474 - 2494 @ 20), (6, 20), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 160), (6, 20), PASSIVE-SCAN
(5250 - 5330 @ 160), (6, 20), DFS, PASSIVE-SCAN
(5490 - 5730 @ 160), (6, 20), DFS, PASSIVE-SCAN
##### iwlist channels ###################
lo no frequency information.
enp0s20u2 no frequency information.
wlp1s0 32 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Channel 36 : 5.18 GHz
Channel 40 : 5.2 GHz
Channel 44 : 5.22 GHz
Channel 48 : 5.24 GHz
Channel 52 : 5.26 GHz
Channel 56 : 5.28 GHz
Channel 60 : 5.3 GHz
Channel 64 : 5.32 GHz
Channel 100 : 5.5 GHz
Channel 104 : 5.52 GHz
Channel 108 : 5.54 GHz
Channel 112 : 5.56 GHz
Channel 116 : 5.58 GHz
Channel 120 : 5.6 GHz
Channel 124 : 5.62 GHz
Channel 128 : 5.64 GHz
Channel 132 : 5.66 GHz
Channel 136 : 5.68 GHz
Channel 140 : 5.7 GHz
Current Frequency:2.437 GHz (Channel 6)
##### iwlist scan #######################
Channel occupancy:
1 APs on Frequency:2.412 GHz (Channel 1)
3 APs on Frequency:2.437 GHz (Channel 6)
wlp1s0 Scan completed :
Cell 01 - Address: <MAC 'Kasafe' [AC1]>
Channel:1
Frequency:2.412 GHz (Channel 1)
Quality=33/70 Signal level=-77 dBm
Encryption key:on
ESSID:"Kasafe"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=000000c2d190f93f
Extra: Last beacon: 36ms ago
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Cell 02 - Address: <MAC 'ZyXEL' [AC2]>
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=45/70 Signal level=-65 dBm
Encryption key:off
ESSID:"ZyXEL"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=0000007974f64404
Extra: Last beacon: 36ms ago
Cell 03 - Address: <MAC 'HITRON-CC00' [AC3]>
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=49/70 Signal level=-61 dBm
Encryption key:on
ESSID:"HITRON-CC00"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
18 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=lo Interface doesn't support scanning.
enp0s20u2 Interface doesn't support scanning.
000000041172a69f
Extra: Last beacon: 36ms ago
IE: WPA Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Cell 04 - Address: <MAC 'KD WLAN Hotspot+' [AC4]>
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=51/70 Signal level=-59 dBm
Encryption key:off
ESSID:"KD WLAN Hotspot+"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
18 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=000000041172acb1
Extra: Last beacon: 36ms ago
##### module infos ######################
[iwlmvm]
filename: /lib/modules/3.16.4-1-ARCH/kernel/drivers/net/wireless/iwlwifi/mvm/iwlmvm.ko.gz
license: GPL
author: Copyright(c) 2003- 2014 Intel Corporation <[email protected]>
version: in-tree:
description: The new Intel(R) wireless AGN driver for Linux
srcversion: D67526D799CF939C2A2C228
depends: iwlwifi,mac80211,led-class,cfg80211
intree: Y
vermagic: 3.16.4-1-ARCH SMP preempt mod_unload modversions
parm: init_dbg:set to true to debug an ASSERT in INIT fw (default: false (bool)
parm: power_scheme:power management scheme: 1-active, 2-balanced, 3-low power, default: 2 (int)
[mac80211]
filename: /lib/modules/3.16.4-1-ARCH/kernel/net/mac80211/mac80211.ko.gz
license: GPL
description: IEEE 802.11 subsystem
depends: cfg80211
intree: Y
vermagic: 3.16.4-1-ARCH SMP preempt mod_unload modversions
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[iwlwifi]
filename: /lib/modules/3.16.4-1-ARCH/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko.gz
license: GPL
author: Copyright(c) 2003- 2014 Intel Corporation <[email protected]>
version: in-tree:
description: Intel(R) Wireless WiFi driver for Linux
firmware: iwlwifi-100-5.ucode
firmware: iwlwifi-1000-5.ucode
firmware: iwlwifi-135-6.ucode
firmware: iwlwifi-105-6.ucode
firmware: iwlwifi-2030-6.ucode
firmware: iwlwifi-2000-6.ucode
firmware: iwlwifi-5150-2.ucode
firmware: iwlwifi-5000-5.ucode
firmware: iwlwifi-6000g2b-6.ucode
firmware: iwlwifi-6000g2a-5.ucode
firmware: iwlwifi-6050-5.ucode
firmware: iwlwifi-6000-4.ucode
firmware: iwlwifi-7265-9.ucode
firmware: iwlwifi-3160-9.ucode
firmware: iwlwifi-7260-9.ucode
firmware: iwlwifi-8000-8.ucode
srcversion: E52619966602F14805A714C
depends: cfg80211
intree: Y
vermagic: 3.16.4-1-ARCH SMP preempt mod_unload modversions
parm: swcrypto:using crypto in software (default 0 [hardware]) (int)
parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
parm: amsdu_size_8K:enable 8K amsdu size (default 0) (int)
parm: fw_restart:restart firmware in case of error (default true) (bool)
parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int)
parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable (default: 1) (int)
parm: nvm_file:NVM file name (charp)
parm: uapsd_disable:disable U-APSD functionality (default: N) (bool)
parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
parm: power_save:enable WiFi power management (default: disable) (bool)
parm: power_level:default power save level (range from 1 - 5, default: 1) (int)
[cfg80211]
filename: /lib/modules/3.16.4-1-ARCH/kernel/net/wireless/cfg80211.ko.gz
description: wireless configuration support
license: GPL
author: Johannes Berg
depends: rfkill
intree: Y
vermagic: 3.16.4-1-ARCH SMP preempt mod_unload modversions
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
##### module parameters #################
[iwlmvm]
init_dbg: N
power_scheme: 2
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
probe_wait_ms: 500
[iwlwifi]
11n_disable: 1
amsdu_size_8K: 0
antenna_coupling: 0
bt_coex_active: Y
fw_restart: Y
led_mode: 0
nvm_file: (null)
power_level: 0
power_save: N
swcrypto: 0
uapsd_disable: N
wd_disable: 1
[cfg80211]
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
##### /etc/modules ######################
grep: /etc/modules: No such file or directory
##### modprobe options ##################
[/etc/modprobe.d/iwlwifi.conf]
options iwlwifi 11n_disable=1
##### pm-utils ##########################
[/etc/pm/sleep.d/90alsa] (755 root)
case "$1" in
hibernate|suspend)
thaw|resume)
aplay -d 1 /dev/zero
*) exit $NA
esac
##### udev rules ########################
grep: /etc/udev/rules.d/*net*.rules: No such file or directory
##### dmesg #############################
[ 1.284399] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[ 1.284446] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 1.466756] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 1.490496] systemd-udevd[155]: renamed network interface wlan0 to wlp1s0
[ 1.630021] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 1.832900] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 2.896518] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 2.907963] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 35.768085] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 35.781194] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 35.793332] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 35.804522] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 37.819461] wlp1s0: authenticate with <MAC 'ZyXEL' [AC2]>
[ 37.821532] wlp1s0: send auth to <MAC 'ZyXEL' [AC2]> (try 1/3)
[ 37.825568] wlp1s0: authenticated
[ 37.828298] wlp1s0: associate with <MAC 'ZyXEL' [AC2]> (try 1/3)
[ 37.830866] wlp1s0: RX AssocResp from <MAC 'ZyXEL' [AC2]> (capab=0x421 status=0 aid=6)
[ 37.839183] wlp1s0: associated
[ 37.839217] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 38.129138] iwlwifi 0000:01:00.0: No association and the time event is over already...
[ 38.129174] wlp1s0: Connection to AP <MAC 'ZyXEL' [AC2]> lost
[ 71.084001] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 71.096522] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 118.185693] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 118.198363] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 118.209937] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 118.220741] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 123.864974] wlp1s0: authenticate with <MAC 'ZyXEL' [AC2]>
[ 123.867270] wlp1s0: send auth to <MAC 'ZyXEL' [AC2]> (try 1/3)
[ 123.882206] wlp1s0: authenticated
[ 123.884469] wlp1s0: associate with <MAC 'ZyXEL' [AC2]> (try 1/3)
[ 123.887219] wlp1s0: RX AssocResp from <MAC 'ZyXEL' [AC2]> (capab=0x421 status=0 aid=6)
[ 123.900889] wlp1s0: associated
[ 123.900917] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 124.174397] iwlwifi 0000:01:00.0: No association and the time event is over already...
[ 124.174433] wlp1s0: Connection to AP <MAC 'ZyXEL' [AC2]> lost
[ 153.151555] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 153.163679] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 161.468177] systemd-udevd[684]: renamed network interface usb0 to enp0s20u2
[ 165.160036] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 165.172167] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
########## wireless info END ############
Thank you in advance for your help, if you need me to try anything, please ask!
Last edited by damwdan (2014-11-10 11:24:22)

I have the exact same problem, appeared completely random. I had several restarts this Christmas on the laptop, even after upgrades. I blamed the ath driver. But I noticed when I restart the router by plugging out it from the wall, then in again, sometimes it's working.
I carefully changed every possible settings in the router, then I found if I disable IPv6 (yes, it's capable of that despite Sky does not provide IPv6 service) it started to work even after multiple reboots. It took mi a while since the new year.
I'm using connman and when it was wrong, connman was completely frozen. If I entered "connmanctl scan wifi", it never quit. Same for "connmanctl state".
I also noticed that the router LED was blinking continuously and on the laptop when I checked the connection status with ifconfig it showed very high usage of TX packets. It also blocked the whole wifi, so my phone was not able to access the internet. Strange problem, I'm unsure what caused it and not quite sure how disabling IPv6 solved it. But I'm also afraid that maybe somewhere else I can't disable IPv6 on the router.

Sony Ericsson W810i and iSync 2.4: "can not connect to this device"

I am using Mac OS 10.4.11 and iSync 2.4, which I believe are the most up to date versions. My Sony Ericsson W810i is shown as being compatible with iSync as shown on the iSync support page, but while I try to add the phone to it I get the message:
"W810i
iSync can not connect to this device".
Does anybody have any ideas how to sort this problem? I've tried restarting both my computer and phone before trying again.

I finally figured out how to fix this problem. The mobile phone had to be initially added by the computer under Bluetooth to pair them before adding the device to iSync. Adding the computer as a device to the phone to pair them, as I had been doing, didn't allow it to work with iSync.

Can't see hp colorlaserjet 2600n and just one pc can't connect to notwork

I've just bought a time capsule and I have some problems...
I have a pc that can only connect to the network when it is without any password
And I have an HP colorlaserjet 2600n printer that i can't see in timecapsule configuration (I saw it just once, but couldn't print)
Any suggestions??
thanks

vpa-ni,
I am glad you currently have it working. I put the link below to your HP printer software page.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=29120&lang=en&cc=us&p...
If it doesn't resolve your issue, I would suggest posting this in the commercial forums since this is a commercial product. The link is below.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413#.UhYRDj8bhoI
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HT2731 I have been trying to update my ipod and it keeps saying can't connect to the store but I'm able to purchase apps from the store. Which I did right after it said that???

I don't know what's going on with my ipod it keeps saying can't connect to store when I try to download updates but I can still buy apps from the store???

Make sure your system time & date is set properly. If it is not, then move it backwards 2 months, then try to connect to the store. Good chance it will work then.
Change it back after again.

T400 Intel 5300 AGN WiFi can't enable device on Windows 7

After an XP to Windows 7 Ultimate upgrade, wifi is broken. The yellow antenna light next to the bluetooth light at the bottom of the screen is lit. Wired neworking works but not Wifi. I've downloaded the latest Intel driver but when I troubleshoot it gives error messages such as "the device is not enabled".
I've scoured forums and tried a few things.
1. Uninstall the driver, uninstall Thinkvantage Connection Manager, reboot, reinstall driver, connection manager.
2. Turn off wireless-n (someone previously posted a solution that involved disabling wireless n).
3. Disabled the ability to disable the device on the power manager.
4. Lowered the antenna power (it was on high).
5. Verified the device in enabled in the bios.
6. Hit fn-F5 (which seems to do nothing)
7. Checked the switch in the front (the yellow light does turn off if I slide it left).
If you start up Thinkvantage Access Connections, it shows zero wireless access points and I know I have a few neighbors besides me who have wireless routers. My mac finds my router (a D-Link DIR-655) just fine. A few folks mentioned that the cards do go but it seems strange. The computer rarely leaves the house. Anyone have a suggestion of something I may have missed ?
Solved!
Go to Solution.

Solution: Booted into Safe Mode, uninstalled wireless drivers, reinstalled them. Victory !
I suppose it shouldn't have been this difficult but I'm glad the safe mode worked.

Intel 5300 agn keeps disconnecting on brand new X301

Hi,
I just received a new X301 today with Windows 7 64 bit and I've been quite happy with it except that the wireless card keeps losing the signal and then reconnecting. I am not sure why and this does not occur with other laptops on this network. What should I do? Should I downgrade the driver? It looks like the driver I have is the latest. Should I contact lenovo because the card is defective? Thanks.

Same here. I have a new W700 running Windows 7. My WAP at home is a WRT54G v3 running DD-WRT.
Sometimes the link goes up and down all the time, sometimes it's stable. Messing with the power settings seems to fix it, sometimes.
This is a pretty commonly reported problem and I think the 5300 driver has been patched to address it, but obviously it's not fixed yet. I'm current on all my patches so there's not much I can do other than wait for another one.

Lenovo T410 and Intel 6200 AGN - does it fit ?

Hi everyone!
I have a thinkpad T410 2516-ADU and an onboard thinkpad wireless adapter wich doesnt work uinder Ubuntu. I did a little research and found out that the Intel 6200 (60Y3231) and the Intel 6300 (60Y3233) work grreat under Linux. I had a T400 with an Intel card it it worked great with a lot of Linux distros. Now I wanna buy this 6200 card wich is about 10-20$ on the net but it looks bit shorter then the place where it supposed to go on my T410. The holes for the screws are way to far from the slot, making me think that I need a taller card. Lenovo has this one listed as compatible, but I'm not realy sure how its suposed to fit. Here's two pics from the the card and the back of my T410 for comparison.
the slot on the left covered by the sticker is where the card is suposed to go. Also exept the two scres that go in, am I suposed to attach some wires for the antenas?

that is the WWAN slot, the WLAN card slot is under the keyboard.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Error connecting, tap to retry, it sees my WiFi and computer name but can't connect

Hi all, I am trying to get Edge Inspect to work on my Windows 7 PC (it did work for me a few times when I had it installed as Shadow when it initally came out)
I have read through various forum posts. I am also running Mcafee Virusscan/Firewall.
In Google Chrome I have the extension installed at the little "In" symbol top right, when I click it it says Adobe Edge Inspect "On", please start the Adobe Edge Inspect Application.
I open up the lastest version of Edge Inspect (v1.0.393) on either my iPhone or iPad, it shows the name of my WiFi router and shows the name of the computer that is running Google Chrome, it looks like it is searching for a connection (shows spinner) and then it says "Error connecting, tap to retry".
I have opened up port 7682 in my Mcafee Firewall
I have shutdown all open programs
I have tried manually entering in the computer IP address via manual connect
I have updated chrome extension and ios apps to latest version
I have tried reinstalling chrome extension
I have tried at Windows Command prompt "netstat -ano" it doesnt show port 7682 being used, until I open up Google Chrome, then it shows MYCOMPUTER:7682 SYN_SENT, which I checked the PID against and yes it is Google Chrome using 7682
Any help would be great

Hi again Mark, still no luck here.
I also have a Mac in my network so I thought I'd try installing to that to see what would happen, I just installed Adobe Edge Inspect extension onto Google Chrome on that machine and restarted the iOS apps on both iPad and iPhone and they actually didnt see the Mac machine at all, still just shows the PC computer.
Also did I mention on my iPad I can still see the last time the connection actually worked (when it was called Adobe shadow, on my iPad underneath MYCOMPUTERNAME Error Connecting, tap to retry it has MYCOMPUTERNAME Last Used 24/07/12 8:59PM). Wouldnt have anything to do with a conflict with the old Adobe Shadow or anything would it, I'm pretty sure Adobe Shadow got uninstalled by default anyway, just a thought.
So I'm not sure if it can be a problem with the Router because nothing has changed with the router since the last time it successfully worked when it was Shadow? I did add the Mac machine to the network since this time, but that machine hasnt been on when I have been doing any of this testing anyway.
Also in the Edge Inspect in the Chrome browser I do not see any deviced listed, but back on the iOS App I do see the Wifi network and Computer name as discussed, so does this mean its an inbound connection issue or?
Also sent you router settings via private message etc.

WRVS4400N V2 and Intel 5300 AGN can't connect at N speeds

Similar Messages

Maybe you are looking for