WRVS4400Nv2 router and WAP4410N access point

WRVS4400Nv2
Love it! More Bars In More Places! Yahoo and never cuts out...nice job guys worth the money!!!!
bugs
1. Can't find how to set it to use https for access of the admin panel, very puzzling
WAP4410N
bugs
1. WMACFilter.htm&unit=0&vap=0 > Wireless Client List
This needs a To Sort by Client Name, IP Address or MAC Address and it should always list
Select Check box    ||   Client Name    ||   IP Address   || MAC Address
but it currently only lists ( this is bad form and looks rushed? )
Select Check box    ||   MAC Address
AND No sort ability
This looks rushed because the partner device the WRVS4400Nv2 as the above functionality.
Doen't look good when the same functions don't work / look the same??
2. WMACFilter.htm&unit=0&vap=0 MAC 20:
If you enter a mac address into MAC 20: and save it it returns blank with the change saved to MAC 19 so it overwrites MAC Address 19 REAL BUG HERE!
A bug in common WAP4410N and WRVS4400Nv2
I will call this a functional bug
The connection control should have an input box with buttons for Add || Edit || Delete and you should enter the MAC Address in and click add and this should populate a read only textarea so you are NOT limited to just 20 client computers. Basically this should work like the Setup_lan.htm in WRVS4400Nv2 Static IP Mapping but instead of doing mapping just add/subtract/edit Mac addresses and you can fit a lot more than 20.
This is a Major limitation considering I paid pretty good money for this router and access point, I should have vertually limited clients
So back to the Setup_lan.htm in WRVS4400Nv2 static IP mapping......I LOVE this feature and the way it was implemented.....NICE JOB GUYS
Genius is not in the understanding of complexity but in its simplification! by R.Ries
Windows defined as 32 bit extensions and a graphical shell for a 16 bit patch to an 8 bit operating system originally coded for a 4 bit microprocessor, written by a 2 bit company that can't stand 1 bit of competition. by R.Ries
Ban Internet Explorer from your website and force upgrades to real browsers, FF, Opera or other

Hello
Genius is not in the understanding of complexity but in its simplification! by R.Ries
Windows defined as 32 bit extensions and a graphical shell for a 16 bit patch to an 8 bit operating system originally coded for a 4 bit microprocessor, written by a 2 bit company that can't stand 1 bit of competition. by R.Ries
Ban Internet Explorer from your website and force upgrades to real browsers, FF, Opera or other

Similar Messages

  • Roaming between RV220W wireless router and WAP121 Access Point

    Hello, I have recently purchased a RV220W wireless router and a WAP121 access point and i would like to allow my users to "roam" between the two networks as needed (so when the user is closer to whichever one they connect to that one since it has a better signal). For the most part I only have experience in cisco IOS and in actual routers not the wireless stuff so my knowledge has not exactly transfered over well.

    William,
    WDS will not work between the RV220W and WAP121 due to incompatible chipsets. The RV220W can be repeated using WDS by another RV220W or RV180W only. You will need to plug the WAP121 into the RV220W or try WorkGroup Bridge mode to repeat the signal.
    Regarding roaming, the router or AP are not aware of each other and do not have the capability to disconnect a client and help them connect to the AP with the stronger signal. The client will switch to the stronger AP only when the original signal is lost.
    The Aironet (enterprise) devices have the ability to utilize a wireless LAN controller which can help keep devices connected to the stronger signal and allow truly seamless roaming between APs.
    - Marty

  • There is no communication between devices which are connected to Linksys Wireless WAP4410N Access Point ?

    Dear all,
         I deployed new Linksys Wireless WAP4410N Access Point and it is working fine. Laptop which is connected to AP can able to access internet. It can able to communicate with AP and also the gateway IP(Router IP) but the issue is wireless devices are not able to communicate between them. In the case LAN device can communicate between wireless devices. Can't able to share files between wireless devices.
         Please help me to troubleshoot this issue. Wat could be the issue over here. Wat step i have to take to clear this issue.
         Advance in thanks.
    Thanks and regards,
    Chandhuru.M

    Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
    Under Wireless/Security how do you have the Wireless Isolation configured?
    Wireless Isolation (within SSID) should be disabled to allow wireless computers associated to the same SSID to see and transfer files between each other
    Thanks
    Eric Moyers    .:|:.:|:.
    Cisco Small Business US STAC Advanced Support Engineer
    CCNA, CCNA-Wireless
    866-606-1866
    Mon - Fri 09:00 - 18:00 (UTC - 05:00)
    *Please rate the Post so other will know when an answer has been found.

  • Win 7 Pro 64 occasionally fails to connect using IKEV2 to Win2008R2 Routing and Remote Access server

    I'm a networking guy and having this troubling VPM issue that I can't find.
    I have a number of VPN connections from my Win7Pro 64 PC to various customers.  Their end points are all Windows Routing and Remote Access on Windows 2008R2 STD servers.
    Every once and a while I will hang at Verifying User ID and Password and eventually get  ERROR 809. Change the security type on my VPN connection from IKEV2 to PPTP - never an issue, connects in right away.
    I can also try from another PC (at the same or alternate location) to get into that same server using the same credentials and access - no issue using either IKEV2 or PPTP.
    This has happened at various times to various customers. Here is what I know it is not:
    - Not the local or remote routers or Firewalls since I can always get in from other PC's going through the same network. Even so, tried rebooting all several times
    - Not an ISP issue at either end since I can always get into other IKEV2 servers from the same PC and from other PC's to the server I can't from my PC.
    This leads to the only logical conclusion.  It is something to do with my Win7Pro 64 PC but for the life of my I can not find it.
    I have obviously tried rebooting the Win7Pro PC. I have also tried recreating the VPN connection several times. Nothing.
    Help!

    Hi,
    I know that you've mentioned that it is not a issue about firewall or router settings, but this error usually comes when some firewall between client and server is blocking the ports used by VPN tunnel.
    so to allow IKEv2 traffic, please make sure to configure the network firewall to open UDP ports 500 and 4500, and to allow IP protocol 50.
    If that is not possible, deploy SSTP based VPN tunnel on both VPN server and VPN client – that allows VPN connection across firewalls, web proxies and NAT
    You can refer to this blog
    http://blogs.technet.com/b/rrasblog/archive/2006/06/14/which-ports-to-unblock-for-vpn-traffic-to-pass-through.aspx
    Regards
    Yolanda
    TechNet Community Support

  • WAP4410N Access Point wall-mountable?

    Hello everybody,
    I have a little question regarding the WAP4410N access point.
    Is it possible to mount this access point at a wall or a ceiling?
    Are there any little "holes" at the back of the access point for mounting?
    Or is there a "mounting-bracket" for this access point?
    I've already read the data sheets and documentation for this ap, but found nothing.
    Many thanks in advance.
    regards,
    Kevin

    Hi Walter,
    Yes ...it can be wall mounted
    http://www.cisco.com/en/US/docs/wireless/access_point/csbap/wap4410n/quick_start/guide/WAP4410N_QuickStartv1.pdf
    Cheers!
    Rob

  • Setting wireless router as an access point

    I'm trying to set up a wireless router as an access point for a wired router. The wired portion of the network is fine and the internet connection is working.  The laptop sees the wireless router and can log in to it.  However, the wireless router does not receive an internet connection and cannot "see" the wired portion of the network. I cannot log into the wireless router from one of the wired computers.
    Below are the settings I'm using:
    Wired router--Linksys BEFSR41v3
     Obtain ID Automatically
     192.168.0.1
     255.255.255.0
     Local DHCP enabled
     Start # 192.168.0.100
     RIP Disabled
     UPnP off
    Wirless router--Linksys WRT54GS
     Automatic Conifguration DHCP
     192.168.0.2
     255.255.255.0
     DHCP Server off
     Firewall/NAT off
     UPnP off
     Set to Router function (rather than Gateway)
    I have had to set the laptop to a static IP, since it keeps revereting to a default IP.  It is set to 192.168.0.102, 255.255.255.0, Gateway=192.168.0.1, DNS=192.168.0.1
    Any suggestions would be welcome.
    Thanks
    Solved!
    Go to Solution.

    As you have Disabled the DHCP Server on the Router and the Changed the IP on the Router to 192.168.0.2. the only thing remaining is the Connection part that is you need the Connect the BEFSR41 router from the Number one port to the Number one of WRT54GS that should Work. Please remove the Static IP Address from the Computers.

  • Windows 2012 routing and remote access service with same subnet

    I have internal server IP range -192.168.1.0/24
    Windows routing and remote access service  with vpn client IP -192.168.11../22
    client side IP subnet is -192.168.1.0/24
    So we wan routing \ NATING between  192.168.1.0/24 to 192.168.11.0/22 so if vpn user try to ping 192.168.11.5 it should internally forward all request to 192.168.1.5 
    <p>Don't forget to mark helpful or answer</p> <p>connect me :-</p> <p>http://in.linkedin.com/in/satya11</p> <p>http://facebook.com/satya.1000</p>

    Hi,
    According to your description, my understanding is that VPN client and internal network has the same IP range -192.168.1.0/24. And you want to transfer internal network from IP address 192.168.1.0/24 to 192.168.11.0/22.
    Agree with Charles David’s point of view. The easiest way to fix routing confusion would be to either change the VPN subnet or the VPN client subnet.
    Or, if you configure Windows Server(RRAS) as VPN server, you may enable NAT to transfer internal IP address:
    1. Open RRAS, add NAT.
    2. New interface to NAT and configure it as public interface.
    3. Open Address Pool tab, add IP address range 192.168.11.0/22.
    4. Click Reservations, add reserved IP(192.168.11.0/22) and corresponding internal IP(192.168.1.0/24) one by one.
    This would be a lot of workload. Besides, you may use 3rd party devices to transfer subnet IP addresses.
    Best Regards,
    Eve Wang 
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Pulling traffic details from WAP4410N Access Point

    Hi
    I recently got WAP4410N access point and hoped I could count traffic of my home users using syslog (my tenants cost me quite a lot per month).
    Here is what the manual says:
    Syslog Notification—Syslog is a standard protocol used to capture
    information about network activity. The access point supports this protocol
    and sends its activity logs to an external server. To enable Syslog, click
    Enabled. The default is Disabled.
    - Syslog Server IP Address—Enter the IP address of the Syslog server.
    In addition to the standard event log, the access point can send a
    detailed log to an external Syslog server. The access point’s Syslog
    captures all log activities and includes this information about all data
    transmissions: every connection source and destination IP address, IP
    server, and number of bytes transferred.
    I enabled Syslog Notifications and set Syslog Server IP Address to one of the local IPs connected through this AP.
    The target PC has win7 installed. I use WinSyslog to save all the incoming logs to a file.
    There were no logs recorded till I ticked all the options Administration->Log->Log section in the AP configuration utility.
    Now I get records for logins to the  configuration utility but nothig else.
    Can I get traffic data (source-destination and number of butes transferred) from the AP somehow?
    Thanks

    Hi Peter, this is a Windows feature (a confusing one at that). On the same Window where the message displays asking for the PIN should say something like "Connect to the network without setting it up". This should take care of that for you.

  • Active directory domain services stopped after removing routing and remote access role

    Hello everyone;;
    I am in deep trouble.. I did install routing and remote access and then  lost connection to the server remotely. Then I connected a monitor to the server and removed the role... then it asked me to restart the server . After logging back in I found
    all my active directory service has gone... I can see red cross on active directory domain services.. Also I am able to ping other pcs but other pcs cannot ping my server..
    However when I go into the active directory services, it shows all services are running except file replication service. I have tried to start that service but it give error 1053 error..
    My server in  between loses LAN connection... I dont know what is going on.. Please help!!!
    My  server is win 2008 R2 ser pack 1
    Only one DC....
    Has fixed ip, 
    no DNS server running..

    Hi,
    The File Replication Service Start Error 1053 error can be caused by damaged Windows system files. Corrupted system files entries can threaten the well-being of your computer. Many events can result in creating system file errors.
    Please refer to the articles below to troubleshoot the issue:
    File Replication Service Start Error 1053
    http://repairerrors.net/file-replication-service-start-error-1053.html
    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Regards,
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error 1053 when starting the Routing And Remote Access service

    Hi all,
    When I tried to start the "Routing And Remote Access" service on Windows 8.1 I got an error message as follow.
    Could some one help me please.
    Than's.

    Hi MRAB,
    Please check if all dependences are enabled first.
    Then set the start type to Automatic.
    Does this issue still occur after a restart?
    Alex Zhao
    TechNet Community Support

  • How do I use a Dlink WBR-1310 router as an access point w/WRT54GS Router?

    How can I set up my Dlink WBR-1310 router as an access point for the main router which is a Linksys WRT54GS?

    I don't mean to be stupid but perhaps I was vague. I want to be able to plug the xbox 360 into the wrtu54g-tm using it as only a way to communicate wirelessly to my wrtg54G which is plugged into my modem. Are you saying that this can't work unless I try to use DD-wrt or something like that?

  • Wlc 5508 and 40 access point 1141n disturbance in the temp response

    Hello,
    i have a wlc 5508 and 40 access point 1141n
    there are 1500 users connected with this controller 5508.
    but when i ping at my gateway  ,there is a disturbance in the temp response .
    Here below a snapshot:
    Réponse de 172.16.1.1 : octets=32 temps=1 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=5 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=2 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=56 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=105 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=433 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=1 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=100 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=300 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=466 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=711 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=900 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=55 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=52 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=54 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=200 ms TTL=55
    Réponse de 172.16.1.1 : octets=32 temps=57 ms TTL=55
    Réponse de 172.16.1.1: octets=32 temps=800 ms TTL=55
    anyone help me?
    thx

    Looks to be wither a duplicate address issue or a configuration issue.  Try to test with only using the 2.4ghz and then again with only the 5ghz and see if you see a difference.
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • Routing and Remote Access Logs (Windows Server 2008 R2)

    Hi,
    I have a Windows 2008 R2 server running Routing and Remote access and users are using PPTP VPN's to connect to our network.
    I have been asked to find logs for the following for connections in to our server
    Username used for connection
    Computer Name
    IP Address used by computer connecting
    Start/End time of VPN session
    Date
    Encryption used
    I found an article stating to enable RRAS logs you need to run the following command
    To enable RAS logs run command “netsh ras set tracing * enabled” and found a series of logs created in this location C:\Windows\tracing
    None appear to contain the information I am looking for and was wondering if I was doing this correctly and if not how I am meant to extract this information?
    If you require any more details just let me know.
    Kind Regards
    David

    Hi,
    I can’t sure which article you have read, but fur the 2008R2 the RAS to enable the log and the debug log in the KB is descried like this, I recommend you to try the KB
    mentioned method.
    To configure RRAS to enable logging
    1. Start Server Manager. Click Start, click Administrative Tools, and then click Server Manager.
    2. In the navigation tree, expand Roles, and then expand Network Policy and Access Services.
    3. Right-click Routing and Remote Access, and then click Properties.
    4. On the Logging tab, select Log errors only, Log errors and warnings, or Log all events, depending on how much information you want to capture.
    5. Click OK to save your changes.
    The related KB:
    RRAS: Logging should be enabled on the RRAS server
    http://technet.microsoft.com/zh-cn/library/ee922651(v=ws.10).aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Would you tell me If window server installed with "routing and remote access" can output firewall logs.

    I install "routing and remote access" into Window Server and make it work as a firewall.
    When connections are accepted or denied at firewall, would you tell me if the firewall can output the logs ?
    If that function can, would you tell me how to configure ?
    Thanks.

    Hi Kohenro31,
    I'm a little confused about configuring RRAS to work as firewall, cause we usually deploy RRAS as VPN connection, router etc, would you please post more information in detail?
    Routing and Remote Access Service:
    http://technet.microsoft.com/en-us/library/cc754634(v=ws.10).aspx
    In addition, to view firewall event logs please check this article:
    Viewing Firewall and IPsec Events in Event Viewer:
    http://technet.microsoft.com/en-us/library/ff428140(v=WS.10).aspx
    To enable RRAS logs, please check this article:
    Enabling logs for RRAS:
    http://blogs.technet.com/b/rrasblog/archive/2005/12/22/enabling-logs-for-rras.aspx
    If I have any misunderstanding, please let me know.
    Best Regards,
    Anna Wang

  • Set value when a virtual, analog modem should answers in Server 2012 Routing and Remote Access

    Hi there,
    I googled for hours on the following problem:
    We have a Routing and Remote Access Server with an Dialogic Diva PRI card (30 lines). The card provides an analog, virtual modem pool. All this runs on Windows Server 2012 (without R2).
    My problem is that the client will be connected after 3 or 4 rings on the line (I can not hear properly with our client device), but it should be connected after the first ring.
    Under Server 2000 there was the possibility to set the value "NumberOfRings" in the registry and / or  set the modem to ATS0 = 1. Both ways do not work in Server 2012.
    Can anyone tell me how it works under 2012?
    Thanks and regards
    Andre

    I assume you followed Dialogic's instructions for configuring the device on Windows Server 2012.  It would most likely make more sense to contact Dialogic if you are having issues.  They support the product.  If it is not working according
    to their configuration instructions, they are in the best position to be able to answer your questions.
    . : | : . : | : . tim

Maybe you are looking for

  • Performance issue BPC 7.5 SP4

    Hi We have got performance issue after a upgrade from BPC 7.5 SP03 to BPC 7.5 SP04 Patch1. We got problem with EVDRE reports especially with large reports with a lot of settings in MemberSet or if we use filter on property in MemberSet. We have repor

  • Cannot connect to SQL Server 2008 R2 Express

    I have a database application that connects to the Northwind sample db in MS Access and lets the user perform CRUD operations. Now I want to add the same for MS SQL Server, however, I have trouble connecting to it using this connection string: I chan

  • Erro in file to mail scenario

    Hi all In file to mail scenario, i m getting a error com.sap.aii.af.ra.ms.api.DeliveryException: com.sap.aii.messaging.util.XMLScanException: illegal value in {}Date my input message to the adapter is <ns0:Mail encoding="" xmlns:ns0="http://sap.com/x

  • Song dissapeared from my iPhone and iTunes account

    I recently purchased an Album for my kids (Madagascar 2) and have been listening to it near daily on my iPhone. There is one song in particular that they love (The Traveling Song) that could only be purchased by buying the entire album. For some reas

  • Weblogic 10.3 standalone/Jeveloper 11.1.1.3 nonfunctional

    I have tried deploying several applications from very simple to complex. I have not gotten any one to work. All the applications work fine in the integrated environment. when deploying to the "production" environment - they all fail. None of the EJBs