WRVS440N Internet Acess Policy Issue

Firmware Version: V2.0.0.8-ETSI
I use the Internet Access Policy to block some websites. But i cannot block domains with a hyphen inside. Then I obtain following error-message.
Invalid URL. Please check the format of the URL.
I fixed it with add the URL in the keyword blocklist, but I can't believe, that this is the right way. I think it's a bug in firmware.
Regards Goeran

I agreed with you, there are a lot of bugs in the firmware, I am not sure Cisco tets the firmware properly before it release.

Similar Messages

  • RVS4000 Internet Access Policy issues after FW upgrade to 1.3.3.5

    Hi,
    we run a small home/business network using an RVS4000v1. Everything is pretty simple and straight forward. We use 10 different Internet Access Policies (IAP) that's it. We recently upgraded the Firmware to 1.3.3.5.
    Since then all IPaddresses (that is 2 IPaddresses in total) that have 24 hr access to the internet will get cut off the internet just before/around midnight. All IAPs that use a time window (e.g. 8:00 AM to 10:00 PM) are working fine (also on the next day).
    The web GUI still works and the status of the routers still says its up and the WAN access is up as well. We have to reboot the router (through the webGUI) to get 24hr access again or save the same IAP again.
    Reading the release note for FW 1.3.3.5 I note that there is a know issue with IAP.
    >>QUOTE
    The second Internet access policy does not work.
    Work Around: Configure only one Internet access policy within a 24-hour
    interval.
    >>UNQUOTE
    I am just not sure how to read it.
    Is it only the second IAP that has the issue (and the IAP numbers 3 to 10 do not)? Or will only ONE IAP work and no others?
    Or is the second policy that uses a 24hr setting meant to be the issue? If this was the case, could a work around be to set the time from 00:05 AM to 11:55 PM (or in my case 00:05 to 23:55)?
    We appreciate your help
    Andy

    Friends,
    The issue is resolved. I just switched off my phone and removed the battery. Inserted the battery after a minute or so and everything seems to be fine. Even the available memory shown is around 25.15 GB.I had even forgotten to take a backup before upgrading to PR 1.3. Still all my Photos,Videos,Documents are as they were before upgrading.
    Thankfully i can heave a sigh of relief now
    Cheers,
    Goks

  • Access policy issues and daylight savings

    I have the WRVS4400N. I have purchased a few Linksys routers in the past and have been happy with their operation. The wireless access however, was mediocre until I purchased this model. This model has great a great wireless connection. I like the fact that I can make many changes to the settings on the router without having to reboot the router. The performance of this router in combination with the cable modem has been excellent. It far outperforms the equipment that it replaced. I will normally pick a linksys product over another brand.
    I am having 2 intermittent issues that are really causing me grief and an additional couple of annoying issues. I need help in fixing these issues. I have confirmed that I have the latest firmware version.
    1) Some computers do not have connection to the internet. As if the security policy is confused about the time or connection. I really think this is a security policy issue, but I will let you decide.
    2) There are some computers that I allow a 24/7 connection to the internet. For the rest I don’t want them to have access between the hours of 12a-6a. I have found that the connection doesn’t always shut-off. I have kids and do not want them to have access during those hours. I never had problems with my previous linksys router.
    3) I am unable to set an access policy that spans the 5 min between 11:55p and 12a. In my previous linksys router I could.
    4) The new daylight savings schedule is not part of my current firmware. This really threw off my security policies.
    I have found that if I reboot or if I simply goto the security policy screen and click on save settings it seems to correct itself. But, I shouldn’t have to babysit it to make sure that it’s working correctly. When I am out of town I need to know that my security policies will continue to work while I am away.
    Here’s my set up:
    1) I have a linksys cable modem that connects me to the internet through my cable provider.
    2) I have the linksys wireless (WRVS4400N) router that connects to the cable modem.
    3) I have a 3Com Superstack II switch as the backbone of my network which connects to the router.
    4) I have several devices connected to this router: computers, xbox, vonage phone line.

    This is EXACTLY what my router is doing...
    2) Access restrictions do not work, PERIOD...."ALLOW" will disable internet access for the entire subnet (regardless of the rule), and "DENY" will prevent uploading of file attachments to hotmail, myspace, facebook etc....for every computer on the subnet.
    Message Edited by DSMKilla on 10-26-2008 11:08 AM
    (Edited post for guideline compliance. Thanks!) 
    Message Edited by JOHNDOE_06 on 10-26-2008 11:39 AM

  • Group Policy issues

    Hi All,
    Am facing plenty of issues in Group policies.. Like when i run this command "gpresult /v" i could see the same policy applied in as thrice in applied group policy.. and that policy is default domain policy.. also trying to add one of intranet site
    in Internet Group policy maintenance policy but its not reflected to users.. even i forced the policy..  Please advice me on this.
    i have given the gpresult fyr.. some have a quick look and advice me accordingly.
    Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
    Copyright (C) Microsoft Corp. 1981-2001
    Created On 3/6/2014 at 9:20:31 AM
    RSOP data for OURDOMAIN\venkat2r on INBRLT141 : Logging Mode
    OS Configuration:            Member Workstation
    OS Version:                  6.1.7601
    Site Name:                   N/A
    Roaming Profile:             N/A
    Local Profile:               C:\Users\venkat2r
    Connected over a slow link?: No
    USER SETTINGS
        Last time Group Policy was applied: 3/6/2014 at 9:07:33 AM
        Group Policy was applied from:      INCHDC01.OURDOMAIN.com
        Group Policy slow link threshold:   500 kbps
        Domain Name:                        OURDOMAIN
        Domain Type:                        WindowsNT 4
        Applied Group Policy Objects
            ourdomain_Policy_Customized
            Global_Wallpaper
            ourdomain_Policy_Customized
            ourdomain_Policy_Customized
        The following GPOs were not applied because they were filtered out
            Local Group Policy
                Filtering:  Not Applied (Empty)
        The user is a part of the following security groups
            Everyone
            BUILTIN\Administrators
            BUILTIN\Users
            NT AUTHORITY\INTERACTIVE
            CONSOLE LOGON
            NT AUTHORITY\Authenticated Users
            This Organization
            LOCAL
            High Mandatory Level
        The user has the following security privileges
        Resultant Set Of Policies for User
            Software Installations
                N/A
            Logon Scripts
                N/A
            Logoff Scripts
                N/A
            Public Key Policies
                N/A
            Administrative Templates
                GPO: Global_Wallpaper
                    KeyName:     Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\ForceActiveDesktopOn
                    Value:       1, 0, 0, 0
                    State:       Enabled
                GPO: ourdomain_Policy_Customized
                    KeyName:     Software\Policies\Microsoft\Windows\Control Panel\Desktop\ScreenSaveTimeOut
                    Value:       54, 0, 48, 0, 48, 0, 0, 0
                    State:       Enabled
                GPO: Global_Wallpaper
                    KeyName:     Software\Microsoft\Windows\CurrentVersion\Policies\System\Wallpaper
                    Value:       67, 0, 58, 0, 92, 0, 87, 0, 105, 0, 110, 0, 100, 0, 111, 0, 119, 0, 115, 0, 92, 0, 87, 0, 101, 0, 98, 0, 92, 0, 87, 0, 97, 0, 108, 0, 108, 0, 112, 0, 97, 0, 112, 0, 101, 0,
    114, 0, 92, 0, 69, 0, 109, 0, 101, 0, 114, 0, 105, 0, 111, 0, 46, 0, 106, 0, 112, 0, 103, 0, 0, 0
                    State:       Enabled
                GPO: ourdomain_Policy_Customized
                    KeyName:     Software\Policies\Microsoft\Internet Explorer\Control Panel\HomePage
                    Value:       1, 0, 0, 0
                    State:       Enabled
                GPO: ourdomain_Policy_Customized
                    KeyName:     Software\Policies\Microsoft\Internet Explorer\Main\Start Page
                    Value:       104, 0, 116, 0, 116, 0, 112, 0, 58, 0, 47, 0, 47, 0, 115, 0, 116, 0, 97, 0, 114, 0, 46, 0, 101, 0, 109, 0, 101, 0, 114, 0, 105, 0, 111, 0, 99, 0, 111, 0, 114, 0, 112, 0, 46,
    0, 99, 0, 111, 0, 109, 0, 47, 0, 83, 0, 105, 0, 110, 0, 103, 0, 97, 0, 112, 0, 111, 0, 114, 0, 101, 0, 47, 0, 100, 0, 101, 0, 102, 0, 97, 0, 117, 0, 108, 0, 116, 0, 46, 0, 97, 0, 115, 0, 112, 0, 120, 0, 0, 0
                    State:       Enabled
                GPO: ourdomain_Policy_Customized
                    KeyName:     Software\Policies\Microsoft\Windows\Control Panel\Desktop\ScreenSaverIsSecure
                    Value:       49, 0, 0, 0
                    State:       Enabled
                GPO: Global_Wallpaper
                    KeyName:     Software\Microsoft\Windows\CurrentVersion\Policies\ActiveDesktop\NoChangingWallPaper
                    Value:       1, 0, 0, 0
                    State:       Enabled
                GPO: Global_Wallpaper
                    KeyName:     Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\NoThemesTab
                    Value:       1, 0, 0, 0
                    State:       Enabled
                GPO: Global_Wallpaper
                    KeyName:     Software\Microsoft\Windows\CurrentVersion\Policies\System\WallpaperStyle
                    Value:       52, 0, 0, 0
                    State:       Enabled
            Folder Redirection
                N/A
            Internet Explorer Browser User Interface
                GPO: ourdomain_Policy_Customized
                    Large Animated Bitmap Name:      N/A
                    Large Custom Logo Bitmap Name:   N/A
                    Title BarText:                   ourdomain
                    UserAgent Text:                  N/A
                    Delete existing toolbar buttons: No
            Internet Explorer Connection
                HTTP Proxy Server:   N/A
                Secure Proxy Server: N/A
                FTP Proxy Server:    N/A
                Gopher Proxy Server: N/A
                Socks Proxy Server:  N/A
                Auto Config Enable:  No
                Enable Proxy:        No
                Use same Proxy:      No
            Internet Explorer URLs
                GPO: ourdomain_Policy_Customized
                    Home page URL:           http://star.OURDOMAIN.com/Singapore/default.aspx
                    Search page URL:         N/A
                    Online support page URL: N/A
            Internet Explorer Security
                Always Viewable Sites:     N/A
                Password Override Enabled: False
                GPO: ourdomain_Policy_Customized
                    Import the current Content Ratings Settings:      No
                    Import the current Security Zones Settings:       Yes
                    Import current Authenticode Security Information: No
                    Enable trusted publisher lockdown:                No
            Internet Explorer Programs
                GPO: ourdomain_Policy_Customized
                    Import the current Program Settings: No
    Thanks, Venkatesh. "Hardwork Never Fails"

    Hi,
    Before going further, I have to admit that I made a mistake and Paul is right.
    >>But i am not able to change the security settings in IE like adding sites in Trusted sites its grayed out.
    If we don’t want to allow users to change this setting, we can configure this setting via native policy and the following blog can be referred to as reference.
    Internet Explorer 10 – Add Sites To The Trusted Sites Zone With Group Policy
    http://johnfail.wordpress.com/2013/11/07/internet-explorer-10-add-sites-to-the-trusted-sites-zone-with-group-policy/
    If we want to allow users to change this setting, we can configure this setting via GPP Registry.
    Regarding this point, the following thread can be referred to for more information.
    Add Trusted Sites Via GPO but still allow users to add trusted sites
    http://community.spiceworks.com/topic/326140-add-trusted-sites-via-gpo-but-still-allow-users-to-add-trusted-sites
    Best regards,
    Frank Shen

  • E1200 V2 with no "internet access policy" in built-in web-based setup

    I just bought a factory refurbished E1200.  The label on the bottom says it is a Version 2 model.  When I purchased it, it was loaded with 2.0.02 firmware but I upgraded the firmware to 2.0.04
    My problem is that I'm trying to setup MAC address-based restrictions thru the manual/web-based setup and when I click on the "Access Restrictions" tab, I only have simple "Parental Controls" and not the advanced "Internet Access Policy".
    Is it possible that I have a mislabeled V1 device?  If that is the case, how is it that I was able to upgrade the firmware using firmware from the V2 downloads section.
    Do V! and V2 units use the same firmware but  more importantly, how do I upgrade the built-in software so that I have the advanced "Internet Access Policy" controls?
    Thanks!
    Eric
    Solved!
    Go to Solution.

    Very strange indeed then!  My subtab only has "Parental Controls" listed.  
    I've compared it to the one shown here  ( http://ui.linksys.com/files/E1200/2.0.00/inter_access.htm ) - and mine does not look like this at all!
    I think i have a mislabeled V1 model or at least V1 software loaded,
    Does anyone know if it is possible to download and reload the software that is built in to the router or do I need to return it and get a (hopefully) new one?
    Thanks!
    Eric

  • My Internet Connection Dropping Issues...

    I too am having the occasional Internet connection dropping issues.  Phone and TV continue to work.
    Since I had Fios installed last November I am on my third ONT and 2nd router.  When I called in my latest drop yesterday the call center person told me I had a hardware issue because my computer had a valid IP address assigned.  I tried to teach her something about DHCP but she would not listen to me.  I asked her to please reboot the ONT and she refused because "nothing was indicating a problem with it".  Whatever...
    Each time the Internet goes out the router acts fat and happy.  I have full green on WAN Coax, and strangely enough, a flashing green Internet activity indicator.  Logging into the router shows that I am MOCA connected and assigned a WAN IP address.  But I can't get out past the router at all.  On the event that led to me getting a replacement router the lady said she could talk to the ONT just fine, but not the router.  We reset the router and ONT port numerous times and the connection finally came back up.
    I am not sure of the protocol between the ONT and router, but I think the ONT is keeping enough signal going to make the router "think" its happy, but then the ONT is not passing packets at some point.  After yesterdays call and the refusal to reset the ONT I just hung up on her and reset it myself.  Of course everything started working just fine...like I thought it would.
    So what is the issue here?  Is MOCA a mess?  Is an Ethernet connection to the ONT better?  I am utterly disgusted with this miserable system and can't afford to continue having these outages.
    I should also add the other wonderful features I have seen.  When I tried to powercycle the *new* router yesterday it decided to dump its entire config including my port forwarding.  Nice...  And I have given up using wireless because if I set the router for WPA it locks up so hard that it takes a master reset to get going again.
    Anyone have some advice on getting this system stable?

    I would try using a non-verizon router.  I used the Netgear router and it fixed my problem.  The Verizon router seem to be pieces of garbage and they over-hear.

  • OMG MY IPOD TOUCH 2G IS DISABLED I DONT KNOW WHAT TO DO. SHOULD I CALL APPLE SUPPORT SO THEY CAN DO SOMTHING BECAUSE I DONT HAVE INTERNET ACESS TO DOWNLOAD ITUNES. PLEASE HELP

    My iPod touch 2g is disabled and I don't have internet acess to download itunes. Iit wanted to know if I can call apple support to fix it. Can anyone tell me what to do??

    You will have to put it in recovery mode on a computer with itunes.
    There is no other way at all.

  • How can i use laptop/pc's internet acess to iphone 4s

    how can i use laptop/pc's internet acess to iphone 4s?

    Use your PC to establish an ad-hoc network.

  • Windows 7 DNS and Group Policy Issues

    Hi,
    We have several suites of Windows 7 domain connected PC's.
    In one of the suites I have been called into look at 3 different PC's where the users have not got mapped drives, desktop backgrounds, internet connectivity - because their group policies have not applied.
    When I look at the error logs I find DNS 1014 errors, and Group Policy 1054 errors.
    I have looked at the logs on the switches, and there is nothing on them - Could a pupil pulling the network cable out cause these errors?... Possibly they could have put it back in before I got back in the room.
    The user logs off of the PC and back on again and are fine, as are the users that logon after them.
    We have 2 DC's/DNS servers, which I would have thought would be able to cope with the load here.
    Please let me know what you think the likely cause could be.

    Hello John555444,
    What is your current situation?
    Is this issue resolved?
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Group Policy issue - Bandwidth detection failed

    Hi
    We have a major issue affecting multiple users (>100) where they are unable to login to the machine.It looks like core windows services do not start such as DHCPClient, EventLog, UserProfileService.
    Looking at the events on the pc I can see the following events:
    Event 6314
    Group policy bandwidth estimation failed. Group policy processing will continue. Assuming fast link.
    Event 6323
    Group Policy dependency (Network Location Awareness) did not start. As a result, network related features of Group Policy such as bandwidth estimation and response to network changes will not work.
    I can see the NLA service started but I am worried alot more machines will become unusable. A change was made to group policy regarding searching items in the start menu
    User Configuration\Administrative Templates\Start Menu and Taskbar
    Do not search files
    Enabled
    Do not search Internet
    Enabled
    Remove Games link from Start Menu
    Enabled
    Remove Help menu from Start Menu
    Enabled
    Remove Music icon from Start Menu
    Enabled
    Remove Network Connections from Start Menu
    Enabled
    Remove Network icon from Start Menu
    Enabled
    Remove Run menu from Start Menu
    Disabled
    Remove the networking icon
    Enabled
    Remove the volume control icon
    Disabled
    Remove user's folders from the Start Menu
    Enabled
    The clients are mostly Vista SP2 with some Windows 7. DCs are Server 2008.
    Any help in resolving this much appreciated.

    Hi,
    >>Group Policy dependency (Network Location Awareness) did not start. As a result, network related features of Group Policy such as bandwidth estimation and response to network changes will not work.
    Network Location Awareness service is a needed service for processing group policy settings since Windows Vista. It helps check the network location of the computers and helps detect slow link when processing group policy settings.
    Before going further, does this happen to all clients in our environment? Please check our network configuration and make sure that the clients are able to correctly communicate with DCs. Besides, we can try to reinstall network
    adapters to see if it helps. Moreover, please further check event logs to see if some other error events were logged.
    Here, we can also try to clean boot our clients to troubleshoot if this is caused by some third party services or applications.
    Regarding how to perform clean boot, the following article can be referred to for more information.
    How to perform a clean boot in Windows
    http://support.microsoft.com/kb/929135
    In addition, if everything goes clean, we can try to delay the application of Group Policy at startup by following the procedure described in the Resolution section in the article below to see if it helps.
    Windows 7 Clients intermittently fail to apply group policy at startup
    http://support.microsoft.com/kb/2421599
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Access Policy Issues on WRT600N

    I dunno what the deal is but I am having issues setting up an access policy for a computer on my network. I added the ip address of the computer that I want to set restrictions on to the list of "applied pc's", then set "Allow" internet access, "everyday", "24 hours", block website "www.yahoo.com". Then I enabled and clicked save.
    The problem is that after I enable this policy NONE of my other computers on the network get internet access AT ALL anymore. The computer that I set the policy on gets internet access and yahoo.com is blocked. But like I said none of my other computers can get access while this policy is enabled.

    This is EXACTLY what my router is doing...
    2) Access restrictions do not work, PERIOD...."ALLOW" will disable internet access for the entire subnet (regardless of the rule), and "DENY" will prevent uploading of file attachments to hotmail, myspace, facebook etc....for every computer on the subnet.
    Message Edited by DSMKilla on 10-26-2008 11:08 AM
    (Edited post for guideline compliance. Thanks!) 
    Message Edited by JOHNDOE_06 on 10-26-2008 11:39 AM

  • Adobe creative cloud app installed but showing no internet acess

    Hi,
    We have purchased some license recently and trying to use those in our machine. We have installed the creative cloud desktop app in our machine. But after installing the desktop app, we are not able to get the sign in page as we are getting "no internet access". Tried reinstalling and installing few times to no help. Please help.
    Regards,
    Anishk

    This issue crops up mostly due to firewalls.
    You can refer to :
    Creative Cloud Connection Update
    CC = No Internet Connection ERROR!!!
    https://forums.adobe.com/message/4409975
    https://forums.adobe.com/message/5420420
    Regards
    Rajshree

  • Internet DHCP/DNS issues with WRT1900ac

    I've had a WRT1900ac now for about 2 weeks and the problems seem to be escalating.  Need help.  And yes, I've already read dozens of threads about these issues and nothing seems to be working.
    Most of the problems seem to be centered around this DHCP/DNS issue that so many have been reporting.
    First, the symptoms:
    Galaxy S4 phones when connected via wifi have some apps that don't update (facebook and google play)
    Some computers (both Win 7) will connect to the network just fine, both wired and wireless - but won't be able to get to the internet
    I've spent the last 2-3 days of my life reading forums and trying all sorts of things to get this to work properly (like my old router) and I'm still stuck.  Some things I've tried:
    Firmware is up-to-date (latest version: 1.1.8.164461)
    Manually assigned static DNS in router config settings (connectivity -> local network) to various combinations including the router address, 8.8.8.8, 8.8.4.4, 75.75.75.75, 75.75.76.76 (I have comcast), OpenDNS addresses, etc.  I read that the router address is not needed, so I stopped including it.
    I manually assigned IPs and DNS on the Galaxy S4 phones and that seemed to work... but also seems unnecessary.
    I've reserved DHCP addresses on the computers in question, that didn't seem to work, I also manually set DNS on one of the comupters (can't on the other... long story/not my computer) and that worked for a while and then stopped working.
    The only way to get one of the computers on the internet now is to turn on the guest network (even though the computer is hard wired to the router), connect, and then the wired network works.  No clue why this is, but my guess is that it needs the guest network for DNS, then it fails back over to the wired network.  Once that happens, I can actually turn off the wifi on the computer and everything works great... until I reboot.  Key point: I can't change any settings on that box other than entering in SSID/passphrase info for the wireless connection.  I can connect to the regular (non-Guest) wifi just fine - I just can't ever get to the internet.
    I've tried massaging DHCP settings on the router until I'm blue in the face - Static DNS, reserving DHCP addresses, hell I even put one of the computers in the DMZ to see if that would work and it still can't connect to the internet (it's worth noting that with my old router, Linksys WRT310N, the setup was literally plug-and-play - no hassle with any of this).
    I've tried countless router reboots, factory resets, turning off my modem and router for 2+ minutes, and nothing is working.
    I even read somewhere that if you modify your DHCP settings at all that the WRT1900ac stops doing DNS properly and breaks, so I even tried several "hard" factory resets and used all the default DHCP/DNS settings.  And it worked... for a few hours.
    Seriously, I'm at my wit's end.  I'm out a lot of money on this thing and it's been one headache after another.  Please help.

    I think for most people its a bad idea to hold out that hope, lol. It seems like a great piece of hardware but if you really need a router and don't want to have to 'play' with it, its probably not a good choice. I have an EA6900 that I am very happy with but it has the same restrictions as far as DNS and I really hate the idea that I am forced to use the smartwifi portal. I would really like for them to give me a choice of the old gui or the new one and let ME decide. Lots of routers to choose from out there now and new ones seem to be coming out all the time so do some reading and see if something suits you better. Good luck!

  • Group policy issue

    I have two Domain Controllers Main ( Main DC ) and Second DC.
    the date of some policies is not out of date....
    please check these files to know the problem.
    dcdiag.txt output:
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       * Verifying that the local machine ASMDC, is a Directory Server.
       Home Server = ASMDC
       * Connecting to directory service on server ASMDC.
       * Identified AD Forest.
       Collecting AD specific global data
       * Collecting site info.
       Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=buc,DC=edu,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
       The previous call succeeded
       Iterating through the sites
       Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
       Getting ISTG and options for the site
       * Identifying all servers.
       Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=buc,DC=edu,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
       The previous call succeeded....
       The previous call succeeded
       Iterating through the list of servers
       Getting information for the server CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       * Identifying all NC cross-refs.
       * Found 2 DC(s). Testing 2 of them.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\ASMDC
          Starting test: Connectivity
             * Active Directory LDAP Services Check
             Determining IP4 connectivity
             Determining IP6 connectivity
             * Active Directory RPC Services Check
             ......................... ASMDC passed test Connectivity
       Testing server: Default-First-Site-Name\BSMDC
          Starting test: Connectivity
             * Active Directory LDAP Services Check
             Determining IP4 connectivity
             Determining IP6 connectivity
             * Active Directory RPC Services Check
             ......................... BSMDC passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\ASMDC
          Starting test: Advertising
             The DC ASMDC is advertising itself as a DC and having a DS.
             The DC ASMDC is advertising as an LDAP server
             The DC ASMDC is advertising as having a writeable directory
             The DC ASMDC is advertising as a Key Distribution Center
             The DC ASMDC is advertising as a time server
             The DS ASMDC is advertising as a GC.
             ......................... ASMDC passed test Advertising
          Test omitted by user request: CheckSecurityError
          Test omitted by user request: CutoffServers
          Starting test: FrsEvent
             * The File Replication Service Event log test
             ......................... ASMDC passed test FrsEvent
          Starting test: DFSREvent
             The DFS Replication Event Log.
             ......................... ASMDC passed test DFSREvent
          Starting test: SysVolCheck
             * The File Replication Service SYSVOL ready test
             File Replication Service's SYSVOL is ready
             ......................... ASMDC passed test SysVolCheck
          Starting test: KccEvent
             * The KCC Event log test
             Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
             ......................... ASMDC passed test KccEvent
          Starting test: KnowsOfRoleHolders
             Role Schema Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Domain Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role PDC Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Rid Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Infrastructure Update Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             ......................... ASMDC passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             Checking machine account for DC ASMDC on DC ASMDC.
             * SPN found :LDAP/ASMDC.buc.edu/buc.edu
             * SPN found :LDAP/ASMDC.buc.edu
             * SPN found :LDAP/ASMDC
             * SPN found :LDAP/ASMDC.buc.edu/BUC
             * SPN found :LDAP/5e88f85b-15a6-4ff5-b0fd-6df748df06fd._msdcs.buc.edu
             * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e88f85b-15a6-4ff5-b0fd-6df748df06fd/buc.edu
             * SPN found :HOST/ASMDC.buc.edu/buc.edu
             * SPN found :HOST/ASMDC.buc.edu
             * SPN found :HOST/ASMDC
             * SPN found :HOST/ASMDC.buc.edu/BUC
             * SPN found :GC/ASMDC.buc.edu/buc.edu
             ......................... ASMDC passed test MachineAccount
          Starting test: NCSecDesc
             * Security Permissions check for all NC's on DC ASMDC.
             * Security Permissions Check for
               DC=ForestDnsZones,DC=buc,DC=edu
                (NDNC,Version 3)
             * Security Permissions Check for
               DC=DomainDnsZones,DC=buc,DC=edu
                (NDNC,Version 3)
             * Security Permissions Check for
               CN=Schema,CN=Configuration,DC=buc,DC=edu
                (Schema,Version 3)
             * Security Permissions Check for
               CN=Configuration,DC=buc,DC=edu
                (Configuration,Version 3)
             * Security Permissions Check for
               DC=buc,DC=edu
                (Domain,Version 3)
             ......................... ASMDC passed test NCSecDesc
          Starting test: NetLogons
             * Network Logons Privileges Check
             Verified share \\ASMDC\netlogon
             Verified share \\ASMDC\sysvol
             ......................... ASMDC passed test NetLogons
          Starting test: ObjectsReplicated
             ASMDC is in domain DC=buc,DC=edu
             Checking for CN=ASMDC,OU=Domain Controllers,DC=buc,DC=edu in domain DC=buc,DC=edu on 2 servers
                Object is up-to-date on all servers.
             Checking for CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu in domain CN=Configuration,DC=buc,DC=edu on 2 servers
                Object is up-to-date on all servers.
             ......................... ASMDC passed test ObjectsReplicated
          Test omitted by user request: OutboundSecureChannels
          Starting test: Replications
             * Replications Check
             * Replication Latency Check
                DC=ForestDnsZones,DC=buc,DC=edu
                   Latency information for 1 entries in the vector were ignored.
                      1 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                DC=DomainDnsZones,DC=buc,DC=edu
                   Latency information for 1 entries in the vector were ignored.
                      1 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                CN=Schema,CN=Configuration,DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                CN=Configuration,DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
             * Replication Site Latency Check
             ......................... ASMDC passed test Replications
          Starting test: RidManager
             * Available RID Pool for the Domain is 8604 to 1073741823
             * ASMDC.buc.edu is the RID Master
             * DsBind with RID Master was successful
             * rIDAllocationPool is 7604 to 8103
             * rIDPreviousAllocationPool is 7604 to 8103
             * rIDNextRID: 7640
             ......................... ASMDC passed test RidManager
          Starting test: Services
             * Checking Service: EventSystem
             * Checking Service: RpcSs
             * Checking Service: NTDS
             * Checking Service: DnsCache
             * Checking Service: NtFrs
             * Checking Service: IsmServ
             * Checking Service: kdc
             * Checking Service: SamSs
             * Checking Service: LanmanServer
             * Checking Service: LanmanWorkstation
             * Checking Service: w32time
             * Checking Service: NETLOGON
             ......................... ASMDC passed test Services
          Starting test: SystemLog
             * The System Event log test
             An Warning Event occurred.  EventID: 0x825A0024
                Time Generated: 08/21/2014   00:22:16
                Event String:
                The time service has not synchronized the system time for 86400 seconds because none of the time service providers provided a usable time stamp. The time service will not update the local system
    time until it is able to synchronize with a time source. If the local system is configured to act as a time server for clients, it will stop advertising as a time source to clients. The time service will continue to retry and sync time with its time sources.
    Check system event log for other W32time events for more details. Run 'w32tm /resync' to force an instant time synchronization.
             An Warning Event occurred.  EventID: 0x8000000E
                Time Generated: 08/21/2014   00:32:29
                Event String:
                There were password errors using the Credential Manager. To remedy, launch the Stored User Names and Passwords control panel applet, and reenter the password for the credential BUC.EDU\administrator.
             An Error Event occurred.  EventID: 0x00000422
                Time Generated: 08/21/2014   00:32:29
                Event String:
                The processing of Group Policy failed. Windows attempted to read the file \\buc.edu\sysvol\buc.edu\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not
    successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
                a) Name Resolution/Network Connectivity to the current domain controller.
                b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
                c) The Distributed File System (DFS) client has been disabled.
             ......................... ASMDC failed test SystemLog
          Test omitted by user request: Topology
          Test omitted by user request: VerifyEnterpriseReferences
          Starting test: VerifyReferences
             The system object reference (serverReference)
             CN=ASMDC,OU=Domain Controllers,DC=buc,DC=edu and backlink on
             CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             are correct.
             The system object reference (serverReferenceBL)
             CN=ASMDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=buc,DC=edu
             and backlink on
             CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             are correct.
             ......................... ASMDC passed test VerifyReferences
          Test omitted by user request: VerifyReplicas
       Testing server: Default-First-Site-Name\BSMDC
          Starting test: Advertising
             The DC BSMDC is advertising itself as a DC and having a DS.
             The DC BSMDC is advertising as an LDAP server
             The DC BSMDC is advertising as having a writeable directory
             The DC BSMDC is advertising as a Key Distribution Center
             The DC BSMDC is advertising as a time server
             The DS BSMDC is advertising as a GC.
             ......................... BSMDC passed test Advertising
          Test omitted by user request: CheckSecurityError
          Test omitted by user request: CutoffServers
          Starting test: FrsEvent
             * The File Replication Service Event log test
             ......................... BSMDC passed test FrsEvent
          Starting test: DFSREvent
             The DFS Replication Event Log.
             ......................... BSMDC passed test DFSREvent
          Starting test: SysVolCheck
             * The File Replication Service SYSVOL ready test
             File Replication Service's SYSVOL is ready
             ......................... BSMDC passed test SysVolCheck
          Starting test: KccEvent
             * The KCC Event log test
             Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
             ......................... BSMDC passed test KccEvent
          Starting test: KnowsOfRoleHolders
             Role Schema Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Domain Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role PDC Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Rid Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Infrastructure Update Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             ......................... BSMDC passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             Checking machine account for DC BSMDC on DC BSMDC.
             * SPN found :LDAP/BSMDC.buc.edu/buc.edu
             * SPN found :LDAP/BSMDC.buc.edu
             * SPN found :LDAP/BSMDC
             * SPN found :LDAP/BSMDC.buc.edu/BUC
             * SPN found :LDAP/93561cab-4fb3-421f-9a67-af6b4c280eca._msdcs.buc.edu
             * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/93561cab-4fb3-421f-9a67-af6b4c280eca/buc.edu
             * SPN found :HOST/BSMDC.buc.edu/buc.edu
             * SPN found :HOST/BSMDC.buc.edu
             * SPN found :HOST/BSMDC
             * SPN found :HOST/BSMDC.buc.edu/BUC
             * SPN found :GC/BSMDC.buc.edu/buc.edu
             ......................... BSMDC passed test MachineAccount
          Starting test: NCSecDesc
             * Security Permissions check for all NC's on DC BSMDC.
             * Security Permissions Check for
               DC=ForestDnsZones,DC=buc,DC=edu
                (NDNC,Version 3)
             * Security Permissions Check for
               DC=DomainDnsZones,DC=buc,DC=edu
                (NDNC,Version 3)
             * Security Permissions Check for
               CN=Schema,CN=Configuration,DC=buc,DC=edu
                (Schema,Version 3)
             * Security Permissions Check for
               CN=Configuration,DC=buc,DC=edu
                (Configuration,Version 3)
             * Security Permissions Check for
               DC=buc,DC=edu
                (Domain,Version 3)
             ......................... BSMDC passed test NCSecDesc
          Starting test: NetLogons
             * Network Logons Privileges Check
             Verified share \\BSMDC\netlogon
             Verified share \\BSMDC\sysvol
             ......................... BSMDC passed test NetLogons
          Starting test: ObjectsReplicated
             BSMDC is in domain DC=buc,DC=edu
             Checking for CN=BSMDC,OU=Domain Controllers,DC=buc,DC=edu in domain DC=buc,DC=edu on 2 servers
                Object is up-to-date on all servers.
             Checking for CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu in domain CN=Configuration,DC=buc,DC=edu on 2 servers
                Object is up-to-date on all servers.
             ......................... BSMDC passed test ObjectsReplicated
          Test omitted by user request: OutboundSecureChannels
          Starting test: Replications
             * Replications Check
             * Replication Latency Check
                DC=ForestDnsZones,DC=buc,DC=edu
                   Latency information for 1 entries in the vector were ignored.
                      1 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                DC=DomainDnsZones,DC=buc,DC=edu
                   Latency information for 1 entries in the vector were ignored.
                      1 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                CN=Schema,CN=Configuration,DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                CN=Configuration,DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
             * Replication Site Latency Check
             ......................... BSMDC passed test Replications
          Starting test: RidManager
             * Available RID Pool for the Domain is 8604 to 1073741823
             * ASMDC.buc.edu is the RID Master
             * DsBind with RID Master was successful
             * rIDAllocationPool is 8104 to 8603
             * rIDPreviousAllocationPool is 8104 to 8603
             * rIDNextRID: 8106
             ......................... BSMDC passed test RidManager
          Starting test: Services
             * Checking Service: EventSystem
             * Checking Service: RpcSs
             * Checking Service: NTDS
             * Checking Service: DnsCache
             * Checking Service: NtFrs
             * Checking Service: IsmServ
             * Checking Service: kdc
             * Checking Service: SamSs
             * Checking Service: LanmanServer
             * Checking Service: LanmanWorkstation
             * Checking Service: w32time
             * Checking Service: NETLOGON
             ......................... BSMDC passed test Services
          Starting test: SystemLog
             * The System Event log test
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:15
                Event String:
                Driver Send To Microsoft OneNote Driver required for printer Send To OneNote 2007 is unknown. Contact the administrator to install the driver before you log in again.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:18
                Event String:
                Driver SolidPDF XChange required for printer SolidPDF XChange is unknown. Contact the administrator to install the driver before you log in again.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:18
                Event String:
                Driver NRG SP 3400N PCL 6 required for printer !!net_pc5!NRG SP 3400N PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:19
                Event String:
                Driver Send To Microsoft OneNote Driver required for printer !!BUCLAPTOP1!Send To OneNote 2007 is unknown. Contact the administrator to install the driver before you log in again.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:20
                Event String:
                Driver NRG SP 3400N PCL 6 required for printer !!BUCLAPTOP1!NRG SP 3400N PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
             An Warning Event occurred.  EventID: 0x80000008
                Time Generated: 08/20/2014   23:52:20
                Event String:
                The jobs in the print queue for printer Microsoft XPS Document Writer (redirected 2) were deleted. No user action is required.
                To stop logging warning events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click the
    Advanced tab, and then clear the Log spooler warning events check box.
             An Warning Event occurred.  EventID: 0x80000004
                Time Generated: 08/20/2014   23:52:20
                Event String:
                Printer Microsoft XPS Document Writer (redirected 2) will be deleted. No user action is required.
                To stop logging warning events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click the
    Advanced tab, and then clear the Log spooler warning events check box.
             An Warning Event occurred.  EventID: 0x80000003
                Time Generated: 08/20/2014   23:52:20
                Event String:
                Printer Microsoft XPS Document Writer (redirected 2) was deleted, and users will no longer be able to print to this printer. No user action is required.
                To stop logging information events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click
    the Advanced tab, and then clear the Log spooler information events check box.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:22
                Event String:
                Driver NRG SP 3400N PCL 6 required for printer !!BUCLAPTOP1!NRG SP 3400N PCL 6 (Copy 1) is unknown. Contact the administrator to install the driver before you log in again.
             ......................... BSMDC failed test SystemLog
          Test omitted by user request: Topology
          Test omitted by user request: VerifyEnterpriseReferences
          Starting test: VerifyReferences
             The system object reference (serverReference)
             CN=BSMDC,OU=Domain Controllers,DC=buc,DC=edu and backlink on
             CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             are correct.
             The system object reference (serverReferenceBL)
             CN=BSMDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=buc,DC=edu
             and backlink on
             CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             are correct.
             ......................... BSMDC passed test VerifyReferences
          Test omitted by user request: VerifyReplicas
          Test omitted by user request: DNS
          Test omitted by user request: DNS
          Test omitted by user request: DNS
          Test omitted by user request: DNS
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : buc
          Starting test: CheckSDRefDom
             ......................... buc passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... buc passed test CrossRefValidation
       Running enterprise tests on : buc.edu
          Test omitted by user request: DNS
          Test omitted by user request: DNS
          Starting test: LocatorCheck
             GC Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             PDC Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             Time Server Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             Preferred Time Server Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             KDC Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             ......................... buc.edu passed test LocatorCheck
          Starting test: Intersite
             Skipping site Default-First-Site-Name, this site is outside the scope
             provided by the command line arguments provided.
             ......................... buc.edu passed test Intersite
    ====================================================================
    Repadmin: running command /showrepl against full DC localhost
    Default-First-Site-Name\ASMDC
    DSA Options: IS_GC
    Site Options: (none)
    DSA object GUID: 5e88f85b-15a6-4ff5-b0fd-6df748df06fd
    DSA invocationID: 1355f657-cd24-4ad4-b890-f04f5c624acd
    ==== INBOUND NEIGHBORS ======================================
    DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-21 00:43:56 was successful.
    CN=Configuration,DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-21 00:41:11 was successful.
    CN=Schema,CN=Configuration,DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-20 23:51:37 was successful.
    DC=DomainDnsZones,DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-21 00:45:39 was successful.
    DC=ForestDnsZones,DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-20 23:51:37 was successful.
    Regards and thanks in advance
    Mhiar

    Hi,
    Based on the description, the Sysvol is replicated by FRS service.
    >>some policies at the main DC are not updated like same policies in second DC.
    In this case, we can do a non-authoritative restore on the main DC.
     To do so:   
    Click Start, and then click
    Run.
    In the
    Open box, type cmd and then press ENTER.
    In the
    Command box, type net stop ntfrs.
    Click Start, and then click
    Run.
    In the
    Open box, type regedit and then press ENTER.
    Locate the following subkey in the registry:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Backup/Restore\Process at Startup
    In the right pane, double-click
    BurFlags.
    In the
    Edit DWORD Value dialog box, type D2 and then click OK.
    Quit Registry Editor, and then switch to the
    Command box.
    In the
    Command box, type net start ntfrs.
    Quit the
    Command box.
    Regarding reinitializing File Replication Service replica sets, the following article can be referred to for more information.
    Using the BurFlags registry key to reinitialize File Replication Service replica sets
    http://support.microsoft.com/kb/290762/en-us
    Best regards,
    Frank Shen

  • Group Policy - Issues deploying software packages through GPO

    Hello everyone,
    I am having issues successfully deploying MSI packages through group policy.  I have set my computer account up in its own test OU in my domain, but yet the software will not deploy.  Example, I'm trying to deploy AVG Anti-Virus and make sure it
    is installed on each and every PC in my domain.  As for the GPO, I set it up as an assigned package and pointed to the location of the package with the UNC file path (visible to both the DC and my computer that is part of the affected OU)
    On the domain controller, I get these messages in application event logs:
    Beginning a Windows Installer transaction: \\hs-dc2\software\avg\installavg.msi. Client Process Id: 9048.
    Ending a Windows Installer transaction: \\hs-dc2\software\avg\installavg.msi. Client Process Id: 9048.
    This shows up when I refresh GP on my computer.  I run gpresult /h GPReport.html and get the following message:
    Software Installation failed due to the error listed below.
    Fatal error during installation.
    Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between
    The software is in a share on the domain controller that is visible from my computer, and permissions are set where "Everyone" has read access.  I have tested the package on my computer and it installs
    correctly if I do it manually, so it's a good package. 
    I'm at a loss.  I am admitedly very new to GP management, but I'm pretty sure I have covered all my bases here.  I humbly ask for any and all help that you all can provide.
    Thank you all very much, have a great weekend!

    > Magnolia_Schools.exe
    What's that???
    > \\hs-dc2\software\avg\installavg.msi
    > <file://\\hs-dc2\software\avg\installavg.msi> /qb addeploy=1
    /qb ADDEPLOY=1
    Uppercase matters (:
    A bissle "Experience", a bissle GMV... Wenn meine Antwort hilfreich war, freue ich mich über eine Bewertung! If my answer was helpful, I'm glad about a rating!
    I should have explained, my apologies.  The InstallAVG.msi is the package I have GP deploying.  it is a package that AVG wrote for us that goes in, uninstalls the two previous antivirus softwares we have on our network if it is present, and
    then wraps it to run magnolia_schools.exe which installs the AV software.  I am uninstalling AVG now and will try reinstalling with
    \\hs-dc2\software\avg\installavg.msi /qb ADDEPLOY=1 and report back.
    also, the only logs I found that were around the time of the install attempt were such as these:
    1: 2905 2: C:\windows\system32\appmgmt\MACHINE\{06ee0d46-cd5f-4216-a09f-2aeb573aa5ba}.aas
    1: 2905 2: C:\windows\system32\appmgmt\MACHINE\{06ee0d46-cd5f-4216-a09f-2aeb573aa5ba}.aas
    Does that tell you anything?
    I will say this, if this means anything...now that AVG is installed, the event logs are changing from an error %%1603 to this:
    Failed to apply changes to software installation settings. The installation of software deployed through Group Policy for this user has been delayed until the next logon because the changes must be applied before the user logon. The error was : %%1274
    The removal of the assignment of application exe2msiSetupPackage from policy Install AVG failed. The error was : %%2
    So it acts like it's at least seeing that the package is installed...and reacting differently, correct?
    Thanks so much

Maybe you are looking for

  • Changed operating system mid project in Final Cut Pro

    I was working on a  Final Cut project and changed operating systems from Snow leopard to Mavericks in mid project. I have since changed to Mountain Lion as many of my programs were not comparable to run with Mavericks.   My FCP project takes ages to

  • Login action buttons no longer work and some pages not displaying correctly after upgrade.

    After recent update, some web pages not displaying correctly and Login buttons on some sites do not work. I've updated my plugins and restarted computer, but problems remains. Is this Java, Javascript or something else? Same pages are working fine in

  • ADOBE PHOTOSHOP 11

    I need help in Adobe photoshop 11.  I just downloaded it.  Now my organizer has disapperared.

  • ITunes 8.1.1 won't rip

    I insert a cd and it looks like it is importing it just fine. After it is done and the cd is ejected the songs are not in iTunes. When I reinsert it for ripping it doesn't recognize that it has already done so. Please help! Thank you, Carl

  • Filter tiffs by bit depth, color space

    A way to filter tiffs by 8 vs. 16bit and also color space? If not doable in PS another means of doing it. Thanks