WRVS440N issue with slow FTP

Have a 4400N wireless router, which has the current firmware & IPS signatures loaded on it. A client wants me to exchange some files with them via their FTP site. I am able to connect to the FTP site, but the upload & download or files is extremely slow. I have a Mediacom cable modem coming into my 4400N router, my laptop in this scenario is connected with a wired connection.
Funny thing, I reboot the router and then as soon as it comes up I connect to FTP site and upload/download is very fast, speed I would expect all the time. Then I disconnect from FTP, come back hours later or next day and FTP speeds are extremely slow again. Reboot router and connection is fast again. My browsing speed and e-mail download speed is solid all the time, and very quick. Appears that only FTP is affected by this router reboot.
Not sure why this is. Any ideas or explanations?

I'm also having issue's but I'm unable to upload anything at all. Even a tiny .html file with about 5kb, will time out when performing this step "commmand: STOR index.html, reply: 150 Opening ASCII mode data connection." A few kb are transferred, sometimes more sometimes less but never enough for the whole file.
I opened all ports, I tried different programs, I know everything should work anyway as I can access the ftp at university or every other internet connection but at home it wont do.
Are you honestly telling me the top notch router from linksys isnt able to perform ftp uploads

Similar Messages

Issues with Seeburger FTP adapter

Can one of you with Seeburger FTP adapter experience share some information on these issues I'm facing
1. Do I need to setup resource management in Seeburger workbench. If so, do I need to configure, resource, server and reservations. Do you have more information and what parameters I need here.
2. In the Seebuger FTP adapter, I have
Module Key - exit
Parameter Name - JNDIName
Paramter Valu - deployedAdapters/SeeXIFTP/shareable/SeeXIFTP
JNDIName, should I be replacing this with some other name. I'm trying to get Seeburger FTP to work and in the messaging monitor, I see the message as passed to Module Processor but it does go anywhere from there.
Can one you throw some light on this subject...what to expect from this definition.
Thank you for all your replies,
Parimala

I'm resending this since I did not have any luck with it the first time.
We also have an oss note waiting to be responded on this subject.
When I send messages using Seebuger FTP adapter, I see the following information in the SAP message monitor -
"Message entered module processor exit bean and will be transferred to JCA adapter".
But does not get to IBM VAN mailbox. How do I trace from this point onwards.
Should I use Seeburger monitoring tool for this? If so, I don't see anything in Seeburger monitoring (used all criteria).
Please let me know if you have any information on this subject.
Thanks,
Parimala

Issue with Native FTP on IronPort WSA S670 when using FileZilla

Hi All,
I am using IronPort as Proxy in Explicit Forward Mode.
Currently there is an issue related to Native FTP. When we use FileZilla to access an FTP server, it does not work. If we try bypassing the proxy it does work without any issue. Also, FTP over HTTP works well throuhg Proxy.
We tried with Checkpoint authentication and Raptor authentication formats but to no avail. The configuration seems perfect as I have verified it agianst the Admin Guide. I have attached the same for reference.
In the logs it does say 'Allow' however I get the below error in FileZilla:
Status:          Using proxy X.X.X.X:8021
Status:          Connecting to X.X.X.X:8021...
Status:          Connection established, waiting for welcome message...
Response:          220 Test
Command:          USER *******@X.X.X.X:2021
Response:          331 User name okay, need password.
Command:          PASS *******
Response:          421 Service not available, closing control connection.
Error:          Could not connect to server
The proxy details are as follows:
Model: S670
Version: 7.1.4-053
I would really appreciate if anyone could assist me with this issue.
Thanks in advance
Faiz

Hi Faiz,
Please take a look at the following KB
Article #1401: How do I enable native FTP proxy on FileZilla? Link: http://tools.cisco.com/squish/4Ed0c
If authentication is not enabled, you need to use one of the following configurations depends on your current FTP proxy authentication format settings.
Native FTP FileZilla configuration without authentication and using "Check Point" authentication
USER %u@%h
PASS %p
or
Native FTP FileZilla configuration without authentication and using "Raptor" authentication
USER %u@%h%u
PASS %p
ACCT %p
Hope it helps.
Regards,

Windows 7 icons disappear/reappear Green Progress folder bar issues with slow performance. HELP!!!

Hi there, I hope someone can help me. This all started about a week ago. So I tried a fresh reinstall from my recovery disk. to no avail. Ok I have Home Premium 64bit and it seems my icons in my user folders and subfolders and the actual file icons are
blank stand ard or missing. after a while they reappear to normal. the green progress bar in the explorer folders always lags and never fully completes. It hangs. Now I see that it takes 30 secs to get a program to open. Currently my control panel screen is
blank and my connection between my ipod touch 5g and my desktop is very slow at data transfer. I'm going bonkers! The only things I altered was turning off WMM in my router, Installed a software someone gave me (only to find out it was a crack software) deleted
that first! and used CCleaner to clean my registry

Hi,
So a total reinstall didn’t fix the issue?
We may take a try with the following article to make Windows a better performance.
Optimize Windows for better performance
http://windows.microsoft.com/en-hk/windows/optimize-windows-better-performance#optimize-windows-better-performance=windows-7
Then, please check to see if any new updates available, also the related drivers, make sure they are up-to-date.
After that, if issue insists, please refer to the following article to run chkdsk command in CMD to check if there are disk issue.
http://technet.microsoft.com/en-us/library/bb491051.aspx
Best regards

Production Issue with Receiver FTP Adapter

Hi all,
We have so many interfaces with ECC To FTP via XI, working fine.
We had problem with one particular Interface, FTP Owner is saying that we did not received any files since last night for this interface. But that receiver channel's log is saying clearly that file has been written to folder with given name.
Nearly 140 files needs to be received at FTP site. Suddenly they told that received all 140 files at a time with time all with stamp 11:40am
What might be the cause for this?? has any one faced this kind of issues??
Please share your thoughts
Regards
Suman

Hi rajesh,
Thnx for replying, there is no receiver channel on scheduled
Receiver communication channel time stamp is showing as same as time ecc generated with idoc.
But received at FTP is different time( more time difference)
Checked with FTP Admin, and there is no issues or downtime with FTP at that time.
>>use messaging system and search with message id for knowing this step time stamp.
How to check this, please let me know the link.
Regards

ACE FTP issues with "inspect ftp"

Hello.
My clients want to access an FTP server, via ACE, and I am having some issues. They can login and issue only one command... the second command will not be accepted an after a few seconds the prompt shows the message "connection closed by remote host".
I have sniffed traffic and I see that the connection between the client and the ACE has a strange behaviour because ACE open connection to data using an source port of 1039 (it should be 20, since we are usind an active mode client); between the ACE and the real server runs in active mode (I see normal ftp-data packets).
Other strange thing is that I have FWSM and they let traffic pass from ACE to client (they should expect traffic comming from port 20 and not 1039)
I am doing source NAT and ACE is doing all the necessary changes on source IP adresses.
Anyone has seen similar behaviour?
Any help would be appreciated.
In attach I send my config and traffic sniffing.
Thanks in advance.
Joao Ribau
P.S. - client is 10.1.44.98; VIP is 10.1.9.150; real server 10.1.36.124

Hello.
I didn´t mentioned this before but the gateway of all my networks is an ACE that is loadbalancing traffic to two firewall clusters. I think this is not important because I have a "catch all" VIP in all my interfaces; I assume that ACE forwards traffic with no restrictions or inspections leaving the inspection job to the firewalls and to the ACE that I use to load balance services.
Don´t think this could be the problem but just to make sure I decided to post it.
Best regards,
Joao Ribau.
P.S. - my configs on the ACE that loadbalance traffic to the firewalls are very straightforward. Serverfarms (interfaces of the firewalls), a class-map with a "catch-all" VIP, policy-map to for the serverfarm, a policy-map to tie the class to the serverfarm and finally a service-policy apllied to each interface.

YEARS-old issue with slow play, 100% cpu usage, and conspiracy theories

I've had the same issue for YEARS now, with flash videos (like on youtube) and games starting out okay, but after a little while, they just start to stutter and slow way down, while the CPU usage goes up to ridiculous levels. The browser doesn't matter, firefox or chrome, online content or run off the local hard drive. I have the latest flash player, and this has been a problem ever since at least version 9. I'm using XP. I think version 8 never had this issue, but unfortunately all recent games and youtube videos won't run with version 8. Adobe did something with recent versions of flash player that causes this issue now. Google search and you'll see countless threads from people with all kinds of computers with all kinds of specs having the exact same issue.
There has never been an entry in the Adobe knowledgebase about it, despite the persistence of this problem.
It's like it's a coverup or something. The more I think about it, the more it reminds me about when the Netscape browser was caught secretly uploading information to their servers and resulting in browser slowdowns. Is flash player doing the same thing? Adobe has already been caught out with spyware-like activities with Photoshop connecting to Omniture through the flash-enabled splash screens that were purposely disguised to look like they were innocently connecting to a user's local system, but in fact connecting to stat and online marketing sites. Is this why this years-old problem has never been addressed in any official way? Now I'm just rambling. I want a fix. It's been years now that I haven't been able to enjoy more than a few minutes worth of flash content.
At this point, even if Adobe shrugged their shoulders and said "yeah, we know about the problem but we have no idea how to fix it" would be better than nothing at all.

I've had the same issue for YEARS now, with flash videos (like on youtube) and games starting out okay, but after a little while, they just start to stutter and slow way down, while the CPU usage goes up to ridiculous levels. The browser doesn't matter, firefox or chrome, online content or run off the local hard drive. I have the latest flash player, and this has been a problem ever since at least version 9. I'm using XP. I think version 8 never had this issue, but unfortunately all recent games and youtube videos won't run with version 8. Adobe did something with recent versions of flash player that causes this issue now. Google search and you'll see countless threads from people with all kinds of computers with all kinds of specs having the exact same issue.
There has never been an entry in the Adobe knowledgebase about it, despite the persistence of this problem.
It's like it's a coverup or something. The more I think about it, the more it reminds me about when the Netscape browser was caught secretly uploading information to their servers and resulting in browser slowdowns. Is flash player doing the same thing? Adobe has already been caught out with spyware-like activities with Photoshop connecting to Omniture through the flash-enabled splash screens that were purposely disguised to look like they were innocently connecting to a user's local system, but in fact connecting to stat and online marketing sites. Is this why this years-old problem has never been addressed in any official way? Now I'm just rambling. I want a fix. It's been years now that I haven't been able to enjoy more than a few minutes worth of flash content.
At this point, even if Adobe shrugged their shoulders and said "yeah, we know about the problem but we have no idea how to fix it" would be better than nothing at all.

Having issues with Simple FTP configuration

I am attempting to set up FTP behind this new CISCO ASA 5510 we just bought. I haven't configured a cisco device in 5 years, so I am having issues., i think i am close, but need a little help to get me over the hump. If I FTP from outside (fixed) IP it connects and takes the password but hangs on PASV and gives no data connection below is my configuration. Can anyone help? I am hoping it is simple since I seem to have the connection inside correct. and yes you can connect to the FTP server from inside without issue.
ASA Version 8.2(5)
hostnameASA1
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
nameif External
security-level 0
ip address y.y.y.y 255.255.255.0
interface Ethernet0/1
nameif Internal
security-level 100
ip address x.x.x.x. 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
dns domain-lookup External
dns server-group DefaultDNS
name-serverg.g.g.g.g.
name-server h.h.h.h.
access-list 100 extended permit tcp any host y.y.y.y eq ftp
access-list 100 extended permit tcp any host y.y.y.y eq ftp-data
pager lines 24
logging enable
logging asdm informational
mtu External 1500
mtu Internal 1500
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (External) 101 interface
nat (Internal) 101 0.0.0.0 0.0.0.0
static (Internal,External) tcp interface ftp-data 192.168.0.69 ftp-data netmask 255.255.255.255
static (Internal,External) tcp interface ftp 192.168.0.69 ftp netmask 255.255.255.255
access-group 100 in interface External
route External 0.0.0.0 0.0.0.0 L.L.L.L 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.168.0.0 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca
quit
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map INSPECTION_DEFAULT
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
Cryptochecksum:9c15122a54bf6b87ce5ab8be0f23e9d5
: end

First of all Thanks! So I pulled those commands off.
I am hitting the FTP server behind the firewall as you can see from my first log... It dies on PASV which is why I thought I needed that FTP-Data.
000018)1/25/2013 11:48:21 AM - (not logged in) (72.90.68.10)> 220-FileZilla Server version 0.9.41 beta
(000018)1/25/2013 11:48:21 AM - (not logged in) (72.90.68.10)> 220-written by Tim Kosse ([email protected])
(000018)1/25/2013 11:48:21 AM - (not logged in) (72.90.68.10)> 220 Please visit http://sourceforge.net/projects/filezilla/(000018)1/25/2013 11:48:21 AM - (not logged in) (72.90.68.10)> USER administrator(000018)1/25/2013 11:48:21 AM - (not logged in) (72.90.68.10)> 331 Password required for administrator(000018)1/25/2013 11:48:21 AM - (not logged in) (72.90.68.10)> PASS *****(000018)1/25/2013 11:48:21 AM - administrator (72.90.68.10)> 230 Logged on(000018)1/25/2013 11:48:21 AM - administrator (72.90.68.10)> CWD /(000018)1/25/2013 11:48:21 AM - administrator (72.90.68.10)> 250 CWD successful. "/" is current directory.(000018)1/25/2013 11:48:21 AM - administrator (72.90.68.10)> TYPE A(000018)1/25/2013 11:48:21 AM - administrator (72.90.68.10)> 200 Type set to A(000018)1/25/2013 11:48:21 AM - administrator (72.90.68.10)> PASV(000018)1/25/2013 11:48:21 AM - administrator (ip.ip.ip.ip.ip)> 227 Entering Passive Mode (72,90,69,2,10,125)
Here's what the Log shows when I hit the FTP server from the outside...
6
Jan 25 2013
08:48:52
72.90.68.10
39185
72.90.69.2
21
Deny TCP (no connection) from ip.ip.ip.ip/39185 to outsideinterfaceip/21 flags PSH ACK on interface External
Does that help?
Thanks again? Cyclist eh? Nice, that's my latest passion and it will probably send me to the poor house with the amount of times I crash.

Start-up issues with slowness, blocked icons and disk 'whirr'

Hi
Bought a MB Pro 13" standard model about six weeks ago. This morning, for the first time start-up was incredibly slow, I had the 'beachball' (no clock or data in the top right corner) and I could not select the icons on my Desktop. The Dock appeared after a while but then none of the programmes responded and the clock/battery data etc still did not appear.
It sounded like the hard disc was also trying 'to start' or something with a low whirr.
I´m new to Mac but have searched these forums and used the Disc Utility. The programme mentioned an Invalid Volume count and couldn't be repaired.
Any help or advice regarding what to do next? I'd like to avoid losing all my files, emails from Office '11 for example...
Many thanks

Welcome to Apple Discussions!
It's also possible that your hard drive is failing. If so, you will need to replace it. If Apple replaces it under warranty, they will keep the old drive.
Try Disk Warrior and see if it fixes your problem. If it does, get an external drive and use Time Machine or Super Duper or Carbon Copy Cloner to create a backup, so that you won't have to worry about losing data again. All hard drives will eventually fail--that is just a reality. Having your data on 2 or more hard drives greatly decreases the chance of losing everything.
Good luck!

Odd issue with slow motion and exporting

Hello,
I have a project with footage taken at either 24p or 60i settings on a Canon HF200. I'm using 7.0.1, ProRes 422 selected. Frame size is set to 1920x1080. I'm exporting using the "Share" menu and the Apple TV preset.
The project is divided into sequences. One of these sequences (whose source material shot using the 60i setting) is set to play in slow motion using the "change speed" option set to 50%.
Here's the odd part, to me at least:
When I export just the slow motion sequence of the project, it plays perfectly (good quality, smooth not jerky, no shadows/trails). But when I export all sequences joined together, the slow motion sequence (and just the slow motion sequence) appears stuttery, with trails on every action by the actors.
Another odd bit: when I export just a subset of the project including the slow motion sequence and everything after it, again the slow motion sequence plays as intended, after export. So the problem only occurs if I export the slow motion sequence with anything before it included.
Thanks in advance for any help.

Problem solved, but I'm not sure if it was my re-importing the clips, or un-checking the "frame blending" option that did it. I did both for no particular reason, and one of them worked.

Premiere Elements 7 issues with slow playback, also after exporting

Everyone,
I recently bought Premiere Elements 7 and I am running it on a sufficient computer (Dual core 2.4Ghz, 4 gigs of ram, 8800GTX gfx card).
This all runs on Windows XP, but when I put the video files in Elements. Premiere just plays back slowly.
Everything seems to move in slow motion.
Also after exporting, the video is in slow motion.
The audio on the other hand works fine.
The video files are .MP4 coming from a Sanyo Xacti HD1000 camcorder.

Thanks for your reply Grisetti, the funny thing is actually I also tried to work with the files on an Octo core which also didn't work.
Nevertheless, because that after exporting, so basically rendering, it is also out of sync and playing in slow motion. This is weird because no matter how fast or slow the computer, after rendering it shouldn't matter in the result.
The files are not AVCHD, they are already stored as MP4 files directly on the memorycard of the camera, and can just be copied and pasted onto the computer using a card reader.

IPhoto issue with slow response or hanging on startup

When I attempt to start iPhoto the little gear in the middle of the screen starts spinning and never stops! I cannot get it to actually start up. Tried rebooting, fixing permissions on the disc and forcing it to quit... Not sure what to do! Please help. My wife and I are very very frustrated with this app!
-Mike

What version of iPhoto are you running and what system? As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it? Have you rebooted recently?
OT

Issues with slow page loading and HTTPS

Hi there.
Have had infinity installed for about 3 months and have in the last week to 10 days noticed that web pages are loading slowly. I'm using a wired connection on a fast PC with Chrome as standard browser, although I have tested with IE and my wife has tested with Safari and had the same problem.
If I type in a web address I will get a blank screen with the "Untitled" name on the tab for anything from 5-15 seconds. It seems to be slowest when the browser is first opened and it's looking for my homepage (Google.com) which can take up to 20 seconds to load.
I am also noticing a degredation in performance with a few HTTPS sites I use, mostly banking (Barclays and Santander) and a corporate email web portal - Microsoft OWA. These time out frequently and require the browser to be re-opened.
Rebooting the hub and router doesn't seem to make a difference. I have run the diagnostics robot and it found nothing amiss, green across the board. I'm in an RM postcode and nothing on the alerts that affects me that I can see. Linetest is fine also.
Aside from that, everything seems to be fine. I get very good speedtest results and downloading and uploading is very quick.
Any thoughts?
G.
(edited to correct typos)

Could be because of low speed but I doubt it, can you follow this website quickly and paste the results back thanks.
If this helped you please click the Star beside my name.
If this answered your question please click "Mark as Accepted Solution" below.

Is anyone having issues with slow speeds using safari 8.0

my requests to some sites are left hanging and I have checked my internet speeds.

Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Any change?
If you're running OS X 10.9 or later, select the Advanced tab in the Preferences window and uncheck the box marked
Stop plug-ins to save power
Any change?
Quit and relaunch the browser. Any change?
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Enable Private Browsing in the Safari menu. Any change?
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If Parental Controls is active for any user, please turn it off and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Open the iCloud preference pane and uncheck the box marked Photos, if it's checked. Any change?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

K430 Issues with slow wifi

We have Verizon FIOS Quantum 50/50. Desktop is in gameroom and is getting 3-5 download and same upload. Brought two laptops upstairs - getting 45-50 on each. Samne Realtek wireless cards as in K430. Verizon said it's equipment issue since laptops are getting correct speeds. Have rebooted. Have emptied cache, temp files, run FIOS optimizer. Nothing helps. Moved K430 from floor to on top of desk - same thing. Any ideas?

is it worth replacing internal wireless card?

WRVS440N issue with slow FTP

Similar Messages

Maybe you are looking for