WS-addressing through Oracle Service Bus

Hi,
I'm trying to setup a business process, which is running on IBM WebSphere Process Server, and this need to call a web service through Orcale Service Bus, asynchronously (since this is a long running web service, the process will call it and wait for the answer in a different process step). My scenario is just like the one described here in "Advanced Use Case: asynchronous - Calling Service Providers from Oracle BPEL Process Manager" http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/bpelpmtransport/transport.html... but the client is not Oracle BPEL Process Manager. So my question is, can I use this WS-Addressing based mechanism, in Oracle Service Bus, from another kind of client? Which are the main step to get this?

If I'm not wrong, WS-Addressing is only supported in conjunction with WS-Transport (WSRM- Reliable messaging) http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15866/ws.htm#BACJJHBI
Normal HTTP transport BS might not be of much help in your use-case. You can raise enhancement request for the same.
Thanks
Manoj

Similar Messages

  • Calling Oracle BPM Process Web Service from Oracle Service Bus

    Hi
    I am using Oracle Service Bus 10gR3.
    I have developed simple BPM process through Oracle BPM studio 10.3.1.0.I then followed steps below
    1. Create a Process.
    2. Expose the Process as a Web Service.
    3. Run the project. This starts the Process Execution Engine.
    4. Create an ALSB External Resource of type Management Host.
    5. Create a second ALSB External Resource for registration.
    6. Register the End Point
    Until this point everything is fine. Then I created one project through Oracle Service Bus console. Under that created WSDL, Proxy Service and Business Service Folders. I am using the web service created through BPM studio as teh Business Service in SB . I then created one proxy service to route the request to the Business Service.
    Finally when I try to test the Proxy Service by launching test console, I get the
    <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
    <con:errorCode>BEA-380001</con:errorCode>
    <con:reason>INTERNAL SERVER ERROR</con:reason>
    <con:location>
    <con:node>RouteNode1</con:node>
    <con:path>response-pipeline</con:path>
    </con:location>
    </con:fault>
    I also tried to debug through "Oracle Workshop for WebLogic Version 10.3 " . But I am not getting enough details as to why this is failing.
    Please help me . Thanks In advance.
    Thanks
    Nilay
    Edited by: user8950019 on Feb 1, 2010 4:11 AM

    Hi,
    When im calling wsdl created when BPM exposed as webservice in SOAP-ui, i first hit the startSession
    Request is:-
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:exp="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
    <soapenv:Header/>
    <soapenv:Body>
    <exp:startSession>
    <password>Employee</password>
    <user>Employee</user>
    </exp:startSession>
    </soapenv:Body>
    </soapenv:Envelope>
    Response i Get is:-
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <soapenv:Body>
    <ns1:startSessionResponse xmlns:ns1="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
    <return>3782hecq1s85h</return>
    </ns1:startSessionResponse>
    </soapenv:Body>
    </soapenv:Envelope
    but when i put this sessionId in main request:-
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:exp="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
    <soapenv:Header/>
    <soapenv:Body>
    <exp:expenseReport>
    <sessionId>3782hecq1s85h</sessionId>
    <reportArg>
    <!--Optional:-->
    <comments>yes</comments>
    <!--Optional:-->
    <costCenter>jaa</costCenter>
    <!--Optional:-->
    <description>aa</description>
    <!--Optional:-->
    <isApproved>y</isApproved>
    <!--Zero or more repetitions:-->
    <items>
    <!--Optional:-->
    <elements>
    <!--Optional:-->
    <amount>700</amount>
    <!--Optional:-->
    <date>?</date>
    <!--Optional:-->
    <description>?</description>
    <!--Optional:-->
    <receiptChecked>?</receiptChecked>
    </elements>
    </items>
    <!--Optional:-->
    <reviewedBy>?</reviewedBy>
    <!--Optional:-->
    <submitDate>?</submitDate>
    <!--Optional:-->
    <submittedBy>?</submittedBy>
    <!--Optional:-->
    <total>?</total>
    </reportArg>
    </exp:expenseReport>
    </soapenv:Body>
    </soapenv:Envelope>
    Response coming is :-
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <soapenv:Body>
    <soapenv:Fault>
    <faultcode>soapenv:Server.userException</faultcode>
    <faultstring>fuego.lang.ComponentExecutionException: The method 'expenseReport' from class 'xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl' could not be successfully executed.</faultstring>
    <detail>
    <ns1:stackTrace xmlns:ns1="http://xml.apache.org/axis/">fuego.lang.ComponentExecutionException: The method 'expenseReport' from class 'xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl' could not be successfully executed.
         at fuego.lang.Invokeable.invokeImpl(Invokeable.java:244)
         at fuego.lang.Invokeable.invokeDynamic(Invokeable.java:188)
         at fuego.lang.Invokeable.invoke(Invokeable.java:160)
         at fuego.soaptype.SoapListener.invokeDynamic(SoapListener.java:104)
         at fuego.lang.Invokeable.invoke(Invokeable.java:160)
         at fuego.fengine.FEngineWebServiceExecutor$2.execute(FEngineWebServiceExecutor.java:133)
         at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
         at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
         at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
         at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
         at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
         at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
         at fuego.fengine.FEngineWebServiceExecutor$1.run(FEngineWebServiceExecutor.java:65)
         at fuego.component.Message.process(Message.java:576)
         at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
         at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
         at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
         at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
         at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
         at fuego.fengine.FEngineWebServiceExecutor$WebServiceExecutorPrincipal.processBatch(FEngineWebServiceExecutor.java:168)
         at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
         at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
    Caused by: java.lang.RuntimeException: java.lang.NumberFormatException: For input string: "jaa"
         at xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl.expenseReport(ExpenseReportServiceInternalAlbpmListenerImpl.xcdl:36)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
         at fuego.lang.JavaObject.invoke(JavaObject.java:227)
         at fuego.lang.Invokeable.invokeImpl(Invokeable.java:234)
         ... 21 more
    Caused by: java.lang.NumberFormatException: For input string: "jaa"
         at java.lang.NumberFormatException.forInputString(Unknown Source)
         at java.lang.Integer.parseInt(Unknown Source)
         at java.lang.Integer.valueOf(Unknown Source)
         at fuego.util.Conversion.tojava_lang_Integer(Conversion.java:934)
         at fuego.xobject.runtime.ConversionUtilities.fromString(ConversionUtilities.java:56)
         at fuegoblock.xml.XmlElementDeserializer.deserializeElement(XmlElementDeserializer.java:175)
         at fuegoblock.xml.XmlElementDeserializer.deserialize(XmlElementDeserializer.java:81)
         at fuegoblock.xml.DynamicXml.createObjectFrom(DynamicXml.java:160)
         at fuegoblock.xml.DynamicXml.createObjectFrom(DynamicXml.java:119)
         at xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl.expenseReport(ExpenseReportServiceInternalAlbpmListenerImpl.xcdl:17)
         ... 28 more</ns1:stackTrace>
    <ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">D-113014550</ns2:hostname>
    </detail>
    </soapenv:Fault>
    </soapenv:Body>
    </soapenv:Envelope>
    can anyone explain why this error is coming.?
    Edited by: user8937128 on May 19, 2010 6:58 AM

  • SOAP Header Security in Oracle Service Bus

    Currently we are in the process of implementing the SOAP Header Security through Oracle Service Bus. We have a requirement that BPEL need to call a external web service. That web service will be registered in OSB. While making the call, the OSB need to add the SOAP security header(user name & Pwd) in proxy service before forwarding the request to business service. Can you please help me find some information about that.

    Hi Manoj,
    The request payload which is going to the target is
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    </soap:Header>
    <soapenv:Body>
    <man:GetDefaultRechargeValuesRequest xmlns:man="http://www.NII.com/ManagePrepaidRecharge/workflow/ManagePrepaidRecharge">string</man:GetDefaultRechargeValuesRequest>
    </soapenv:Body>
    </soapenv:Envelope>
    whereas the target expects the soap header populated. the payload expected by the target is
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    <gsa:Authentication xmlns:gsa="http://www.nextel.com.br/Wbs/Gsa">
    <gsa:Account>test</gsa:Account>
    <gsa:Password>test</gsa:Password>
    <gsa:Guid>f65748e63b01</gsa:Guid>
    </gsa:Authentication>
    </soap:Header>
    <soapenv:Body>
    <man:GetDefaultRechargeValuesRequest xmlns:man="http://www.NII.com/ManagePrepaidRecharge/workflow/ManagePrepaidRecharge">string</man:GetDefaultRechargeValuesRequest>
    </soapenv:Body>
    </soapenv:Envelope>
    The Problem now is, when i call a business service(WSDL of the target) from a proxy service and when i set the above expression to the $header using replace action in the proxy service itself, the above expression,instead of going as a request to the business service, it is populated in the response.
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    <gsa:Authentication xmlns:gsa="http://www.nextel.com.br/Wbs/Gsa">
    <gsa:Account>test</gsa:Account>
    <gsa:Password>test</gsa:Password>
    <gsa:Guid>f65748e63b01</gsa:Guid>
    </gsa:Authentication>
    </soap:Header>
    <soapenv:Body>
    <ns0:GetDefaultRechargeValuesResponse xmlns:ns0="http://www.NII.com/ManagePrepaidRecharge/workflow/ManagePrepaidRecharge">
    <ns0:StandardHeaderBlock>
    <ns2:ServiceState xmlns:ns2="http://xmlns.oracle.com/apps/StandardHeaderBlock">
    <ns2:errorCode>SOA_ERR_TARGET_SYSTEM_FAILURE</ns2:errorCode>
    <ns2:errorDesc>
    OSB Service Callout action received an error response
    </ns2:errorDesc>
    </ns2:ServiceState>
    </ns0:StandardHeaderBlock>
    </ns0:GetDefaultRechargeValuesResponse>
    </soapenv:Body>
    </soapenv:Envelope>
    Since the authentication details are not reaching the target, it is giving a target system failure. Can you suggest a remedy to this please.

  • Regarding Integration of Oracle Service Bus with Oracle Server 10g

    Hi,
    Could you please provide some docs or links so as to integrate Oracle Database with Oracle Service Bus. The requirement is that the data will be retrieved or saved or updated in the database after recieving inputs from the user. We are using OSB as middle wayer component between ORacle BPM Studio and ORacle Sever 10g. Please provide some help for the same. The data should move to the Oracle Database through ORacle Service Bus.
    Thanks,
    Abhishek

    You need to first create an external resource for ALSB configuration. You can then use the configuration to connect to ALSB and create the structure for transferring the data.
    You then have to configure a DB transport for updating the process data using ALSB.
    Hope this helps.
    Sarat

  • Access Oracle Service Bus objects from within a PBL program

    Followed instructions from Studio Reference documentation for cataloging Oracle Service Bus objects and embedded sample code but encountered http 404 not found error. Is there anyway to trace the call made to the Service Bus? I change the log message severity level for Workspace application to debug but the call is not logged. The following is the output from the log:
    ================Oracle® BPM - WorkSpace================
    RUNTIME:fuego.papi.exception.ActivityFailedException: Activity '/ExpenseReport#Default-1.0/GlobalCreation[CreateExpenseReport]' task '' could not execute successfully.
    RUNTIME:Detail:Method: '', Exception: 'The method 'CIL_createExpenseReportCreateExpenseReportIN' from class 'oracle.ExpenseReport.Default_1_0.Instance' could not be successfully executed.'
    RUNTIME:
    RUNTIME:     at fuego.papi.exception.ActivityFailedException.create(ActivityFailedException.java:66)
    RUNTIME:     at fuego.server.AbstractProcessBean.createActivityFailedException(AbstractProcessBean.java:3561)
    RUNTIME:     at fuego.fengine.FEngineProcessBean.createActivityFailedException(FEngineProcessBean.java:371)
    RUNTIME:     at fuego.server.AbstractProcessBean.runGlobalActivity(AbstractProcessBean.java:2968)
    RUNTIME:     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    RUNTIME:     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    RUNTIME:     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    RUNTIME:     at java.lang.reflect.Method.invoke(Unknown Source)
    RUNTIME:     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
    RUNTIME:     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
    RUNTIME:     at fuego.component.Message.process(Message.java:585)
    RUNTIME:     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
    RUNTIME:     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
    RUNTIME:     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
    RUNTIME:     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
    RUNTIME:     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
    RUNTIME:     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
    RUNTIME:     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
    RUNTIME:     at fuego.component.CustomExecution.next(CustomExecution.java:176)
    RUNTIME:     at fuego.papi.impl.rmi.RMIExecution.next(RMIExecution.java:109)
    RUNTIME:     at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:177)
    RUNTIME:     at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
    RUNTIME:     at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
    RUNTIME:     at fuego.web.papi.TaskExecutor.runApplicationTask(TaskExecutor.java:349)
    RUNTIME:     at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:95)
    RUNTIME:     at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
    RUNTIME:     at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:229)
    RUNTIME:     at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:220)
    RUNTIME:     at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
    RUNTIME:     at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:83)
    RUNTIME:     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    RUNTIME:     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
    RUNTIME:     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    RUNTIME:     at fuego.web.filter.SingleThreadPerSessionFilter.doFilter(SingleThreadPerSessionFilter.java:64)
    RUNTIME:     at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
    RUNTIME:     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    RUNTIME:     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    RUNTIME:     at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
    RUNTIME:     at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
    RUNTIME:     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    RUNTIME:     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    RUNTIME:     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
    RUNTIME:     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
    RUNTIME:     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
    RUNTIME:     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
    RUNTIME:     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
    RUNTIME:     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
    RUNTIME:     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
    RUNTIME:     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:667)
    RUNTIME:     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
    RUNTIME:     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
    RUNTIME:     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
    RUNTIME:     at java.lang.Thread.run(Unknown Source)
    RUNTIME:Caused by: fuego.lang.ComponentExecutionException: The method 'CIL_createExpenseReportCreateExpenseReportIN' from class 'oracle.ExpenseReport.Default_1_0.Instance' could not be successfully executed.
    RUNTIME:     at fuego.component.ExecutionThreadContext.invokeMethod(ExecutionThreadContext.java:519)
    RUNTIME:     at fuego.component.ExecutionThreadContext.invokeMethod(ExecutionThreadContext.java:273)
    RUNTIME:     at fuego.fengine.FEEngineExecutionContext.invokeMethodAsCil(FEEngineExecutionContext.java:219)
    RUNTIME:     at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1280)
    RUNTIME:     at fuego.server.execution.TaskExecution.invoke(TaskExecution.java:401)
    RUNTIME:     at fuego.server.execution.GlobalTaskExecution.invoke(GlobalTaskExecution.java:146)
    RUNTIME:     at fuego.server.execution.TaskExecution.executeCIL(TaskExecution.java:513)
    RUNTIME:     at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:697)
    RUNTIME:     at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:657)
    RUNTIME:     at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:154)
    RUNTIME:     at fuego.server.execution.GlobalTaskExecution.executeGlobalCIL(GlobalTaskExecution.java:116)
    RUNTIME:     at fuego.server.execution.GlobalTaskExecution.executeGlobalCIL(GlobalTaskExecution.java:96)
    RUNTIME:     at fuego.server.execution.microactivity.GlobalCreationMicroActivity.execute(GlobalCreationMicroActivity.java:109)
    RUNTIME:     at fuego.server.execution.microactivity.GlobalInteractiveMicroActivity.execute(GlobalInteractiveMicroActivity.java:73)
    RUNTIME:     at fuego.server.AbstractProcessBean$44.execute(AbstractProcessBean.java:2961)
    RUNTIME:     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
    RUNTIME:     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
    RUNTIME:     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
    RUNTIME:     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
    RUNTIME:     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
    RUNTIME:     at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
    RUNTIME:     at fuego.server.AbstractProcessBean.runGlobalActivity(AbstractProcessBean.java:2954)
    RUNTIME:     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    RUNTIME:     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    RUNTIME:     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    RUNTIME:     at java.lang.reflect.Method.invoke(Unknown Source)
    RUNTIME:     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
    RUNTIME:     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
    RUNTIME:     at fuego.component.Message.process(Message.java:585)
    RUNTIME:     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
    RUNTIME:     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
    RUNTIME:     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
    RUNTIME:     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
    RUNTIME:     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
    RUNTIME:     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
    RUNTIME:     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
    RUNTIME:Caused by: fuego.lang.RuntimeCILExecutionException: <?xml version="1.0" encoding="UTF-8" ?>
    RUNTIME:<string>return code: 404
    RUNTIME:&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0 Draft//EN&quot;&gt;
    RUNTIME:&lt;HTML&gt;
    RUNTIME:&lt;HEAD&gt;
    RUNTIME:&lt;TITLE&gt;Error 404--Not Found&lt;/TITLE&gt;
    RUNTIME:&lt;META NAME=&quot;GENERATOR&quot; CONTENT=&quot;WebLogic Server&quot;&gt;
    RUNTIME:&lt;/HEAD&gt;
    RUNTIME:&lt;BODY bgcolor=&quot;white&quot;&gt;
    RUNTIME:&lt;FONT FACE=Helvetica&gt;&lt;BR CLEAR=all&gt;
    RUNTIME:&lt;TABLE border=0 cellspacing=5&gt;&lt;TR&gt;&lt;TD&gt;&lt;BR CLEAR=all&gt;
    RUNTIME:&lt;FONT FACE=&quot;Helvetica&quot; COLOR=&quot;black&quot; SIZE=&quot;3&quot;&gt;&lt;H2&gt;Error 404--Not Found&lt;/H2&gt;
    RUNTIME:&lt;/FONT&gt;&lt;/TD&gt;&lt;/TR&gt;
    RUNTIME:&lt;/TABLE&gt;
    RUNTIME:&lt;TABLE border=0 width=100% cellpadding=10&gt;&lt;TR&gt;&lt;TD VALIGN=top WIDTH=100% BGCOLOR=white&gt;&lt;FONT FACE=&quot;Courier New&quot;&gt;&lt;FONT FACE=&quot;Helvetica&quot; SIZE=&quot;3&quot;&gt;&lt;H3&gt;From RFC 2068 &lt;i&gt;Hypertext Transfer Protocol -- HTTP/1.1&lt;/i&gt;:&lt;/H3&gt;
    RUNTIME:&lt;/FONT&gt;&lt;FONT FACE=&quot;Helvetica&quot; SIZE=&quot;3&quot;&gt;&lt;H4&gt;10.4.5 404 Not Found&lt;/H4&gt;
    RUNTIME:&lt;/FONT&gt;&lt;P&gt;&lt;FONT FACE=&quot;Courier New&quot;&gt;The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.&lt;/p&gt;&lt;p&gt;If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.&lt;/FONT&gt;&lt;/P&gt;
    RUNTIME:&lt;/FONT&gt;&lt;/TD&gt;&lt;/TR&gt;
    RUNTIME:&lt;/TABLE&gt;
    RUNTIME:
    RUNTIME:&lt;/BODY&gt;
    RUNTIME:&lt;/HTML&gt;
    RUNTIME:</string>
    RUNTIME:
    RUNTIME:     at fuego.components.ScreenFlow.rethrowUserException(ScreenFlow.java:274)
    RUNTIME:     at fuego.components.ScreenFlow.propagateParentException(ScreenFlow.java:239)
    RUNTIME:     at xobject.Fuego__AutoGen__Screenflows__.__SubmitReport.Begin_Invocator(__SubmitReport.xcdl:13)
    RUNTIME:     at oracle.ExpenseReport.Default_1_0.Instance.CIL_createExpenseReportCreateExpenseReportIN(Instance.xcdl:3)
    RUNTIME:     at oracle.ExpenseReport.Default_1_0.Instance.CIL_createExpenseReportCreateExpenseReportIN(Instance.xcdl)
    RUNTIME:     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    RUNTIME:     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    RUNTIME:     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    RUNTIME:     at java.lang.reflect.Method.invoke(Unknown Source)
    RUNTIME:     at fuego.component.ExecutionThreadContext.invokeMethod(ExecutionThreadContext.java:512)
    RUNTIME:     ... 35 more

    You are receiving a 404 error which means that the binding to the SB is not correct or there is a problem with the SB end part of the integration.
    Are you able to test this successfully from an automatic activity for example aside from trying to use it within a screenflow ?
    Thanks !
    eduardoc.

  • Unable to call  BPM process webserivce  from Proxy in  oracle Service bus

    I created business service in oracle service bus through BPM process WSDL. later Created proxy out of business service. In proxy service MessageFlow I created a route node with service as my BPM process business service. When i invoke proxy I am always getting the following error.
    Request :
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:proc="http://bea.com/albpm/Sapme_test_1/Process">
    <soapenv:Header/>
    <soapenv:Body>
    <proc:startSession>
    <password>Participant</password>
    <user>Participant</user>
    </proc:startSession>
    </soapenv:Body>
    </soapenv:Envelope>
    Response :
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
    <soapenv:Body>
    <soapenv:Fault>
    <faultcode>soapenv:Server</faultcode>
    <faultstring>BEA-380000: General runtime error: socket write error: Connection aborted by peer</faultstring>
    <detail>
    <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
    <con:errorCode>BEA-380000</con:errorCode>
    <con:reason>General runtime error: socket write error: Connection aborted by peer</con:reason>
    <con:location>
    <con:node>RouteNode1</con:node>
    <con:path>request-pipeline</con:path>
    </con:location>
    </con:fault>
    </detail>
    </soapenv:Fault>
    </soapenv:Body>
    </soapenv:Envelope>
    I tried the same example with general webservice instead of BPM Process it is working fine.
    regards,
    pv

    Even Some times I am getting the following error
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
    <soapenv:Body>
    <soapenv:Fault>
    <faultcode>soapenv:Server</faultcode>
    <faultstring>BEA-380000: BAD REQUEST</faultstring>
    <detail>
    <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
    <con:errorCode>BEA-380000</con:errorCode>
    <con:reason>BAD REQUEST</con:reason>
    <con:location>
    <con:node>RouteNode1</con:node>
    <con:path>response-pipeline</con:path>
    </con:location>
    </con:fault>
    </detail>
    </soapenv:Fault>
    </soapenv:Body>
    </soapenv:Envelope>
    regards,
    pv

  • Query regarding the tutorial for Oracle Service Bus (OSB 10gR3)

    Hi,
    I am working on a tutorial of Oracle Service Bus (OSB 10gR3).
    I have created the proxy service and the Business Service, using Oracle Service Bus console.
    The details are as follows:
    Proxy service: LoanGateway
    Business service1: A value of 4.9 or less causes the message to be routed to the ManagerLoanReview business service.
    Business service2: A value of 5.0 or greater causes the message to be routed to the NormalLoan business service.
    When i send the request message, so that it gets routed from proxy service to one of the business service than it gives following error.
    Request Document
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    </soap:Header>
    <soapenv:Body>
    <exam:processLoanApp xmlns:exam="http://example.org">
    <loanRequest xsi:type="java:LoanStruct" xmlns:java="java:normal.client" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <!--Optional:-->
    <java:Name>Smith</java:Name>
    <!--Optional:-->
    <java:SSN>1234567</java:SSN>
    <!--Optional:-->
    <java:Rate>4.1</java:Rate>
    <!--Optional:-->
    <java:Amount>9000000</java:Amount>
    <!--Optional:-->
    <java:NumOfYear>10</java:NumOfYear>
    <!--Optional:-->
    <java:Notes>Manager Loan Application Review Service</java:Notes>
    </loanRequest>
    </exam:processLoanApp>
    </soapenv:Body>
    </soapenv:Envelope>
    Response Document
    The invocation resulted in an error: .
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
    <soapenv:Body>
    <soapenv:Fault>
    <faultcode>soapenv:Server</faultcode>
    <faultstring>
    BEA-380002: Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7021'
    </faultstring>
    <detail>
    <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
    <con:errorCode>BEA-380002</con:errorCode>
    <con:reason>
    Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7021'
    </con:reason>
    <con:location>
    <con:node>RouteNode1</con:node>
    <con:path>request-pipeline</con:path>
    </con:location>
    </con:fault>
    </detail>
    </soapenv:Fault>
    </soapenv:Body>
    </soapenv:Envelope>
    Response Metadata
    <con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
    <tran:headers xsi:type="http:HttpResponseHeaders" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
    </tran:headers>
    <tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">1</tran:response-code>
    <tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
    </con:metadata>

    I have the same problem and I'm not able to telnet localhost on port 7021. How can I change this port number I think that port must be 7001, it is correct?Examples server domain is pre-configured for port 7021. The samples domain will have the examples properly deployed in this domain out of box. You dont need to change any thing in {BEA_HOME}\osb_10.3\samples\domains\servicebus\config.
    I doubt this has to do something with firewall . Check the last statement in the log after starting the domain.
    <May 19, 2009 8:50:09 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.177.242.25:7001 for protocols iiop, t3, ldap, snmp, http.>
    <May 19, 2009 8:50:09 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
    <May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Development Mode>
    <May 19, 2009 8:50:09 AM IST> <Warning> <Server> <BEA-002611> <Hostname "mneelapu", maps to multiple IP addresses: 10.177.242.25, 127.0.0.1>
    <May 19, 2009 8:50:09 AM IST> <Warning> <Server> <BEA-002611> <Hostname "XYZ-v411-10-177-242-25.oracle.com", maps to multiple IP addresses: 10.177.242.25, 127.0.0.1>
    <May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    What are you seeing in your log file?
    Edited by: mneelapu on May 19, 2009 9:58 AM

  • Getting error "URI index 0 is not valid" in Oracle Service Bus

    Dear Friends,
    I am receiving an error "URI index 0 is not valid" while executing Customization File in Oracle Service Bus. I am not able to figure out why it is happening. Please help.
    Thank you.
    Regards,
    Palak Mathur

    AbhishekJ wrote:
    Change the:
    <xt:value>
    <tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">
    <URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</URI>
    <weight>1</weight>
    </tableElement>
    </xt:value>Section to:
    <xt:value>
    <tran:tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">
    <tran:URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</tran:URI>
    <tran:weight>1</tran:weight>
    </tran:tableElement>
    </xt:value>in your Customization File and try again.Hi Abhishek,
    I did the same thing. Actually, the deployment team was getting this error and they called me up to find out. I analyzed and sent the following response:-
    I was going through the Customization file. I removed all the elements from the file and started with only 1 envValueAssignments:-
    +<cus:envValueAssignments>+
    +<xt:envValueType>Service URI Weight</xt:envValueType>+
    +<xt:location>0</xt:location>+
    +<xt:owner>+
    +<xt:type>BusinessService</xt:type>+
    +<xt:path>CommonServices/Business Services/ServiceAddressV1RS</xt:path>+
    +</xt:owner>+
    +<xt:value xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema">0</xt:value>+
    +</cus:envValueAssignments>+
    The customization file got executed perfectly. Then I added another envValueAssignments and it worked fine as well.
    Now, when I added
    +<cus:envValueAssignments>+
    +<xt:envValueType>Service URI Table</xt:envValueType>+
    +<xt:location xsi:nil="true"/>+
    +<xt:owner>+
    +<xt:type>BusinessService</xt:type>+
    +<xt:path>CommonServices/Business Services/ServiceAddressV1RS</xt:path>+
    +</xt:owner>+
    +<xt:value>+
    +<tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">+
    +<URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</URI>+
    +<weight>0</weight>+
    +</tableElement>+
    +</xt:value>+
    +</cus:envValueAssignments>+
    +, I got the above error, ie URI index 0 is not valid. If you check each element then you will know that tableElement defines a namespace as xmlns:tran="http://www.bea.com/wli/sb/transports" which is neither being used by the node nor its child elements. Also the error in server logs was:-com.bea.wli.sb.transports.TransportException: URI index 0 is not valid.+
    It stuck that we were doing something wrong here. I checked other elements in the same file and found that some of them were starting the node as <tableElement xmlns="http://www.bea.com/wli/sb/transports">. So, tableElements should be qualified with this namespace:-http://www.bea.com/wli/sb/transports. It was clear there was issue with qualified name of the element and hence I added the prefix "tran" and made entry as:-
    +<tran:tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">+
    +<tran:URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</tran:URI>+
    +<tran:weight>0</tran:weight>+
    +</tran:tableElement>+
    When I executed the changed customization file it worked. I checked with few more elements and they all worked making me sure that this was the error.
    So, the issue was that the OSB was not able to find any URI and for index 0 there was no URI available. Hence we were getting a weird error which was not at all user friendly. However, while making the OSb they must have thought that no one will make any manual changes (by hand in the file) and this error would be sufficient to tell that there is something wrong with the customization and we must regenerate the customization file.
    Only solution that we do not receive this error in future is rather than making changes to the customization file manually we should use OSB console or scripts to replace the properties. Otherwise we need to be very careful while touching the Customization file.
    Hope this helps.

  • Oracle Service Bus Proxy Testing with Attached Policy

    Hello,
    When I'm testing a Proxy through the test console (lauch by clicking the bug) I'm seeing Override Values in the Security section. I've created four custom policies and attached two of them to the proxy. One that processes the request and the other the processes the response. The other two policies are attached to a composite on an interface to an external  service. Those policies process the request/response respectively. When I bring up the test console for the OSB Proxy, I'm seeing the two policies that are attached to the composite in the "Security" section as "Override Values". If I don't delete the policies, they are executed. Which causes an error. So I have to delete them to get a clean run.  I'm not sure why they are showing up in the "Override Values". It's definitely annoying that I have to delete them each time before executing the test. Any ideas on what's going on?
    Thanks!
    Steve
    Oracle Service Bus Version: [Oracle Service Bus 11.1 Sun Dec 18 03:49:34 PST 2011 1447174] 
    Oracle Weblogic Server Version: [WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 ]

    Hi Wai,
    I think it is not supported with OSB. The doc says -
    46.15 Is single sign-on supported in Oracle Service Bus?
    Strictly speaking single sign-on (SSO) is not applicable to Oracle Service Bus messaging scenarios for several reasons. First, Oracle Service Bus is stateless; there is no notion of a session or conversation among multiple parties. Second, Oracle Service Bus clients are typically other enterprise software applications, not users behind a Web browser. Therefore, it is acceptable to require that these clients send credentials such as username and password on every request, provided that the communication is secured by means such as SSL or WS-Security. However, SSO between the Oracle Service Bus Console and the Oracle WebLogic Server Administration Console is supported. For more information, see "Single Sign-On" in "Security Fundamentals" in Oracle Fusion Middleware Understanding Security for Oracle WebLogic Server.http://download.oracle.com/docs/html/E15866_01/security_faq.htm#i1058723
    http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/security/security_faq.html#wp1053670
    Regards,
    Anuj

  • Oracle service bus cache flush/clear - business service

    Hi Everyone,
    We are currently using oracle service bus as an integration platform. We are conducting a disaster recovery exercise for on of the applications (A) integrated to OSB, but the OSB is always connecting to the primary node of the application A though the DNS at application A is pointing to the secondary node.
    We believe this is happening because OSB is caching the IP address of the application A (though it is using DNS) and keeps connecting to the same server even if the primary traffic is diverted to the secondary node.
    Can someone please let us know if there is a way we can clear the cache of the business service (used to connect to the application A) without restarting the servers?
    Thank you.
    Regards,
    Ram

    Yes, by default the JVM will cache the name resolution. You can change this behaviour by adding the TTL in the managed server startup parameters as follows:
    -Dnetworkaddress.cache.ttl=120 -Dnetworkaddress.cache.negative.ttl=10
    The above parameters mean that the JVM will cache the name resolution for 2 minutes in case of success and for 10 seconds in case of a failure.
    For testing purposes, you can reduce the ttl from 120 seconds, but when in production make sure that this value is not too low.
    Regards,
    Fabio Douek

  • Oracle Service Bus business service - How to disable XML content check.

    Hi All,
    Dear Experts I have the necessity to disable the check on the XML content when message is forwarded to external system by on Oracle Service Bus Business Service to avoid that the XML content as string that I inserted in message is wrapped with the CDATA[[.
    Thanks a lot,
    Mike

    There is no explicit option to disable the check on the XML content.
    But the you can use Messaging Service of type Text request which will consider the data as string and so there will be no check.
    If you want to use WSDL/AnyXML/AnySOAP proxies, the XML check is always carried when the $body varaible is not checked/modified when content streaming is enabled while creating the proxy. I'm quite sure HTTP transport supports content streaming and the stream from the input is directly given to BS with out realizing the XML. Only short coming is it should be a pure pass through and no data enrichment and any action in pipeline that requires realizing the XML from the stream.
    Let me know if this helps.
    Thanks
    Manoj

  • Oracle service bus Business service - Cache Flush/clear

    Hi Everyone,
    We are currently using oracle service bus as an integration platform. We are conducting a disaster recovery exercise for on of the applications (A) integrated to OSB, but the OSB is always connecting to the primary node of the application A though the DNS at application A is pointing to the secondary node.
    We believe this is happening because OSB is caching the IP address of the application A (though it is using DNS) and keeps connecting to the same server even if the primary traffic is diverted to the secondary node.
    Can someone please let us know if there is a way we can clear the cache of the business service (used to connect to the application A) without restarting the servers?
    Thank you.
    Regards,
    Ram

    Yes, by default the JVM will cache the name resolution. You can change this behaviour by adding the TTL in the managed server startup parameters as follows:
    -Dnetworkaddress.cache.ttl=120 -Dnetworkaddress.cache.negative.ttl=10
    The above parameters mean that the JVM will cache the name resolution for 2 minutes in case of success and for 10 seconds in case of a failure.
    For testing purposes, you can reduce the ttl from 120 seconds, but when in production make sure that this value is not too low.
    If you follow the above, you don't have to restart anything and you don't have to write any script. The IP address is going to be updated as long as the DNS server is being updated correctly (you can easily test by pinging the host name)
    Regards,
    Fabio Douek

  • Oracle service bus and composing two web services

    All,
    Do let me know your thoughts on this.
    Currently we have two web services
    Web Service 1 - Verify Eligibility
    Web Service 2 - Approve Proposal
    Web Service 1 has one operation and accepts a well defined set of input parameters similarly web service 2 also exposes a single operation and accepts a set of input parameters.
    These are deployed and running in our environment.
    Now we have a requirement to stitch together these two web services and expose them as one single composite web service on the Oracle Service Bus 11g.
    I want to create a proxy service on the OSB as unified web service (having its own WSDL) by composing the operations and input plus output parameters of the aforementioned two web services.
    This way we can publish the WSDL to the front-end apps and they will trigger it with the required parameters and the proxy service will orchestrate the call to WS1 and WS2 and send the final output back to the calling client.
    I was able to create an outbound call from the Proxy service to the underlying business services but I am not able to expose the Proxy service as web service with a WSDL i.e. create the proxy service by choosing operations of Web service 1 and web service 2
    Please let me know your thoughts on this.
    Regards,
    Sushant

    Thanks Atheek
    The proxy service I tried to create orchestrate 2 web services.
    But where we are struggling is How can i make this proxy service (composite) as a web service along with the WSDL.
    The proxy service should be able to accept calls from the client with set of inputs representing both the underlying web services and coordinate calls b/w these two services and return consolidated output back to the calling client.
    I am not finding a way to create a proxy service (web service along with the wsdl) which is representative of the underlying web services in a consolidated manner that can accepts inputs on behalf of both the underlying web services, orchestrate calls b/w the 2 web services and return the final output back to the calling client.
    example modified to keep it brief
    web service1
    operation name: Verify Eligibility
    Input: Complex type (String name, int Id, String address)
    Output: Complex type(String approval status, int Id, String reason)
    web service2
    operation name: Approve Proposal
    input: Complex type(String approval status, int Id, String reason, int Amount, int EmployeeCount)
    Output: Complex type (String final status, String recommendation)
    Composite Proxy Web Service
    name: Composite Eligibility and Approval
    Input: Complex type ( String name, int Id, String address, int Amount, int EmployeeCount)
    Output: Complex type(String approval status, int Id, String reason,String final status, String recommendation)
    The composite proxy should be created in a manner to jam the inputs of both the underlying web services and expose a representative interface on behalf of both the web services. This composite web service interface creation (WSDL) is where we are struggling a bit.
    Because the calling clients need a unified WSDL to able to communicate with the composite web service.
    Do post your thoughts.
    Thanks Again,
    Sushant

  • How to log the exception using Log action in Oracle Service Bus

    Hi,
    Whenever an exception is raised how to log the exception using Log action in oracle service bus.After logging where I have to find the logged message.

    It would be in the log file for the managed server which ran the request. If you are logging the message at a lower level than your app server, however, you won't see it. You should be logging the exception at Error level.

  • Oracle OSB 11G. Unable to find Oracle Service Bus Configuration Page.

    Hi All,
    Sorry for the apparent silly question but I am studying and learning the product.
    I have the OSB 11G installed and running with a proxy service working and routing requests. The Oracle ESB documentation http://download.oracle.com/docs/cd/E21764_01/doc.1111/e15866/ui_ref.htm#i1327746 at chapter 4.4.2 New Oracle Service Bus Configuration Project Wizard
    Use this wizard to create an Oracle Service Bus configuration project. For configuration options, see Section 4.4.3, "Oracle Service Bus Configuration Page."
    4.4.3 Oracle Service Bus Configuration Page.
    I don't see the configuration page in anywhere in the left pane of the console. Am I missing something? The project creation works fine but I just don't see the configuration Wizard.
    Thanks.
    Regards
    Salvatore Ilardo

    The link which you are referring is for user interface objects in the Oracle Service Bus plug-ins and OSB plug-ins are used with OEPE (Oracle Enterprise Pack for Ecplise) for OSB development. OEPE is the only supported IDE for OSB development as of now.
    Remember, at a time, one and only one Oracle Service Bus Configuration project can be deployed in a OSB domain which may contain desired number of Oracle Service Bus Projects and that's why there is no provision of creating Oracle Service Bus Configuration Project in sbconsole GUI. In IDE, you may create many Oracle Service Bus Configuration Project and that's why it has a Oracle Service Bus Configuration Project Wizard.
    Regards,
    Anuj

Maybe you are looking for

  • Printing Problem with HP 5650

    HI, My printer work well so far, until my wife try to print a document while the printer was not connected to the power line. Since printer refuse to print, jobs go to queue...uninstall printer software but laptop does not allow me to either add, edi

  • HT4906 I recently updated to OS X version 10.8.4 and my iPhoto has disappeared. How do I get it back?

    I recently updated to OS X version 10.8.4 and my iPhoto has disappeared. How do I get it back?

  • EMail and SQLPLUS activity in process flow

    Hi Guys, I am struggling to get the email activity working. I entered all the details but no email is sent? Secondly, I had an easy sql plus script that I pasted into the script property box But the sqlplus just does not execute? truncate table xxx;

  • RTL in Guide?

    I am trying to create a Guide for Arabic audience. I didn't have any issue in adding Arabic text content in it. But I am struggling to find out how to make the layout Right-to-Left instead of the default Left-to-Right. I have seen that in Flash Build

  • I have downloaded Elements trial.  Organiser appears in my dock but does not open.  Help?

    This is the second time that I have downloaded Photoshop elements trial.  The first time I was able to use Organiser without any issues. The second time I went to use it on the first download it would not open (no matter where I tried to open Organis