WS-File Scenario Error
hi all,
i have a scenario that send data from WS to file. when testin my scenario im getting this error in MONI.
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID 7511E1BD8936326C8D0921454679DCF3 Software Component ACE2E030363111DDC1F2D3CB0A010675</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Interface mapping Object ID 7511E1BD8936326C8D0921454679DCF3 Software Component ACE2E030363111DDC1F2D3CB0A010675 does not exist in runtime cache</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
So, i do a CPA cache refresh full mode but nothing change. later others test i do an stop sap because the runtime cache seam no refresh but im getting same error after that.
to test if the error occur in all case create a file CC and add it to sender agreement and scenario work without any error.
what is happening in WS scenario? basis team installed SP14 a few day ago. could it affecting?
Thanks for your help
Rodrigo
You can also check the Error Log in the Visual Administrator, this will give you an accurate idea of the problem.
Check whether the standard service user did not have the java roles properly assigned to it in the Java stack (Visual Administrator).
Also do these
Just refresh the CPACache & SXI_CACHE.
Similar Messages
-
Rfc to file scenario error in sm58
rfc to file scenario error in sm58
i get the error as com.sap.aii.afccommunication.RfcAfwException
:look up of alternativehey
>>i have a doubt do we have to use
starting new task or back ground destination
well it depends upon the logic ur gonna implement,both are used for async RFC so u have to see ur requirement and then decide.
have a look at the following
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/042578488911d189490000e829fbbd/frameset.htm
thanx
ahmad -
IDOC-XI-FILE Scenario: Error in ABAP Mapping
Dear All,
I am working on IDOC-XI-Flat FIle scenario in which I am using ABAP Mapping as per document "How To Convert an IDoc-XML
structure to a flat file and vice versa in XI 3.0".
I created one customized Idoc for this. The Idoc is reacing XI but its flat file is not getting created. Its giving me following error:
<SAP:Stack>Error in mapping program Z_ABAP_MAPPING_PACKING_LIST (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION) An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
I have also gone thru threads posted for the same topic earlier but still I am not been to resolve this error.
Please help me out in resolving this error.
Regards,
N.JainHI,
Log saying that, u have problem in the mapping program.
i.e Z_ABAP_MAPPING_PACKING_LIST
the problem is due declaration of data.
i hope that, you have some methods.
those are declared under intialization section in mapping program.
please use start of selection before the method.
other wise, it will come under intilization section.
warm regards
mahesh. -
Hell Experts,
I have done desgin and configuration from Idoc to File Scenario in XI Intergration server.
Source is R/3 and Target system is File. I have successfully configured each and every step. Send Idoc from R/3 to Intergration server and run sxi_cache. But I didn't get successful results, always the error message shows in SXMB_MONI as follows:
Ackn Status contains system error
During the application mapping com/sap/xi/tf/_CUST_MMAP_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeExcep
tion in Message-Mapping transformatio~
Exception of class CX_XMS_SYSERR_MAPPING
My system Patche level as follows:
SAP_BASIS 640 0012 SAPKB64012
SAP_ABA 640 0012 SAPKA64012
PI_BASIS 2004_1_640 0009 SAPKIPYI69
SAP_BW 350 0009 SAPKW35009
The above error is related to patches problems or any Mapping problems ?
Please help me.
Advanced Thanks.
Regards,
ChandraHi,
This may be a mapping issue, try this:
a)in interface mapping see if grids are formed at source and target after executing the test option,
b)also take the xml of the idoc from sxmb_moni , copy it and paste it at the source of the mapping ( use the src tab now) and execute the mapping, is your file structute formed?
i am not sure of the patch levels.
Regards,
Anirban. -
IDoc to File Scenario Error ( IS - Retail )
Hi all ,
I was trying scenario IDoc (SAP ECC 6.0) (IS-Retail) to File scenario .
When i trigerred IDoc from ECC system , it's showing sent successfully to external system or program.
But the problem is it's not coming inside XI sxmb_moni .
I have checked the ALE Configuration and SLD configuration .
Everything is fine.
When i run the TCODE WE05 for IDocs List in XI , it's getting stucked there and the Error showing is
"IDoc: 0000000000000028 Status: IDoc with errors added
External segment name E2WBB01003 cannot be interpreted "
Even i tried with other IDoc WPDWGR it is showing the same error
"IDoc: 0000000000000029 Status: IDoc with errors added
External segment name E2WPW01 cannot be interpreted"Hi Ashwin,
Please check :
1.The SAP system from which you want to import the IDocs contains function modules for calling metadata.
2.You can import IDocs from SAP Release 4.0 and higher.Support Packages Required for IDoc Imports:
Release Minimum Support Package Requirement
40B SAPKH40B48
45B SAPKH45B26
46A SAPKB46A20
46B SAPKB46B12
46C SAPKB46C05
3.check for the authorizations required to import.
Also see SAP Notes 677732 (authorizations), 672745 (missing function modules), 212011 (access to IDoc metadata), and 718320.
check http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a6095507d11d18ee90000e8366fc2/frameset.htm
*Pls: Reward points if helpful*
Regards,
Jyoti -
Seeburger IDOC-to-File scenario: Error using Classifier module
Hello,
I am running the following scenario: ORDERS.ORDERS05 IDOC -> XI -> X12 850 4010 File.
In the file receiver channel, I am using Seeburger's Classifier and BIC modules as follows:
localejbs/SeeClassifier classifier
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
classifier attID classifierAtt
classifier destSourceMsg MainDocument
classifier showInAuditLog true
bic classifierAttID classifierAtt
bic destEncoding UTF8
bic destSourceMsg MainDocument
bic destTargetMsg MainDocument
bic mappingName AUTO
bic newLine true
bic srcEncoding UTF8
After conversion in XI, the file fails to write to the folder because of this error:
Message processing failed. Cause: javax.resource.ResourceException: ---
Conversion of synchronous request from module chain ended with errors
---Error: [Error:ID=1010;LEVEL=1] BICMapping runMapping() The mapping:
See_XML_AnsiX12 you are trying to load cannot be found in the classpath!
Maybe you forgot to compile or to activate the mapping! DESCRIPTION:
BICMapping Error: The mapping [not specified] you are trying to load cannot
be found in the right path! Maybe you forgot to compile or to activate the
mapping!
When I set the mapping directly to See_X2E_AnsiX12_850_V4010 instead of using the Classifier module, the configuration works fine. But I want to design the receiver channel to be able to receive all types of EDI messages coming from XI.
I am only facing this problem for the IDOC-to-File scenario. Somehow the same configuration works for a File-to-IDOC scenario.
I talked to our Basis team and they said that the map See_XML_AnsiX12 does not exist in Seeburger's delivered content, although I believe that it should be. Has anyone encountered this problem before?
Any suggestions would be appreciated.
Thanks,
ArianneHi Yomesh,
Here is the payload.
<?xml version="1.0" encoding="UTF-8"?>
<LIST>
<S_ISA>
<D_I01>00</D_I01>
<D_I02/>
<D_I03>00</D_I03>
<D_I04/>
<D_I05>ZZ</D_I05>
<D_I06>CELORGS01</D_I06>
<D_I05_2>ZZ</D_I05_2>
<D_I07>AVX</D_I07>
<D_I08>032008</D_I08>
<D_I09>1718</D_I09>
<D_I10>X</D_I10>
<D_I11>00401</D_I11>
<D_I12>000000008</D_I12>
<D_I13>0</D_I13>
<D_I14>T</D_I14>
<D_I15>^</D_I15>
<S_GS>
<D_479>PO</D_479>
<D_142>CLS01</D_142>
<D_124>058895921</D_124>
<D_373>20080320</D_373>
<D_337>1718</D_337>
<D_28>8</D_28>
<D_455>X</D_455>
<D_480>004010</D_480>
<S_ST>
<D_143>850</D_143>
<D_329>800001</D_329>
<S_BEG>
<D_353>00</D_353>
<D_92>SA</D_92>
<D_324>4500005037</D_324>
<D_373>20051110</D_373>
</S_BEG>
<S_CUR>
<D_98>BY</D_98>
<D_100>USD</D_100>
</S_CUR>
<S_FOB>
<D_146>CC</D_146>
<D_309>OR</D_309>
<D_352>FREE CARRIER</D_352>
<D_334>02</D_334>
<D_335>FOB</D_335>
<D_309_2>DE</D_309_2>
</S_FOB>
<S_ITD>
<D_336>01</D_336>
<D_333>3</D_333>
<D_351>45</D_351>
</S_ITD>
<G_SN9>
<S_N9>
<D_128>L1</D_128>
<D_369>GEN</D_369>
<S_MSG>
<D_933>TEST</D_933>
</S_MSG>
<S_MSG>
<D_933>MESSAGE</D_933>
</S_MSG>
</S_N9>
</G_SN9>
<G_SN1>
<S_N1>
<D_98>BY</D_98>
<D_66>92</D_66>
<D_67>6310</D_67>
<S_PER>
<D_366>BD</D_366>
<D_93>Graham Crawford</D_93>
</S_PER>
</S_N1>
</G_SN1>
<G_SN1>
<S_N1>
<D_98>BT</D_98>
<D_66>92</D_66>
<D_67>6310</D_67>
</S_N1>
</G_SN1>
<G_SN1>
<S_N1>
<D_98>SE</D_98>
<D_93>3M COMPANY</D_93>
<D_66>92</D_66>
<D_67>0000019591</D_67>
</S_N1>
</G_SN1>
<G_SN1>
<S_N1>
<D_98>ST</D_98>
<D_93>SAMPLE</D_93>
<D_66>92</D_66>
<D_67>6310</D_67>
</S_N1>
</G_SN1>
<G_SPO1>
<S_PO1>
<D_350>00010</D_350>
<D_330>10.000</D_330>
<D_355>EA</D_355>
<D_212>10</D_212>
<D_639>PE</D_639>
<D_235>BP</D_235>
<D_234>230-1812-01JDS</D_234>
<D_235_2>EC</D_235_2>
<D_234_2>A00000000000002</D_234_2>
<G_SPID>
<S_PID>
<D_349>F</D_349>
<D_352>TIE WRAP,LOCKING,PANDUIT-PLASTIC PART C</D_352>
</S_PID>
</G_SPID>
<S_REF>
<D_128>CO</D_128>
<D_127>4500005037-00010</D_127>
</S_REF>
<G_SSCH>
<S_SCH>
<D_380>10.000</D_380>
<D_355>EA</D_355>
<D_374>002</D_374>
<D_373>20051208</D_373>
</S_SCH>
</G_SSCH>
</S_PO1>
</G_SPO1>
<G_SCTT>
<S_CTT>
<D_354>1</D_354>
</S_CTT>
</G_SCTT>
<S_SE>
<D_96/>
<D_329>800001</D_329>
</S_SE>
</S_ST>
<S_GE>
<D_97>1</D_97>
<D_28>8</D_28>
</S_GE>
</S_GS>
<S_IEA>
<D_I16>1</D_I16>
<D_I12>000000008</D_I12>
</S_IEA>
</S_ISA>
</LIST>
Thanks,
Arianne -
File scenario error in Used defined function
Hi Everyone,
I was doing file to file scenario, i want to get the same source file name in target also.
I created the structure as FileName, Company, Address. I did direct mapping for Company and Address
but for field FileName, i created a userdefined function as i want the same file name.
I mentioned the following code in Used defined function
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
When i test the mapping in IR, with sample data, i am getting this error.
RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:Target_File_MT/FileName. The message is: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._Source_File_to_Target_File_MM_ method DynamicFile$[, com.sap.aii.mappingtool.tf3.rt.Context@1763e46]
Could anyone please help me with the issue.
I have done only IR part, I didnot configured ID.
Regards,
Varun.HI,
Check Adapter Specific Message attributes.This blog will help you
The specified item was not found.
You can also go for variable substitution :-
When you specify the target directory and file name schema, you have option of setting variables and defining them in a table. The variables are replaced by elements from the XML structure at runtime.
http://help.sap.com/saphelp_nw2004s/helpdata/en/8e/464442c1a1c253e10000000a1550b0/content.htm
links on the dynamic variable substitution
The specified item was not found.
The specified item was not found.
Dynamic File Name Part 1
Dynamic File Name using XI 3.0 SP12 Part - I
Dynamic File Name Part 2
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II
Thanks -
File to File scenario Error: Module Exception
Hi guys,
I'm setting up a very simple file to file scenario in XI 3.0
After doing all the set ups in Desing and configuration. In the Adapter Monitor, I'm getting the following error for the SENDER File Adapter:
Sender Adapter v1014 for Party '', Service 'BS_File_transfer':
Configured at 16:00:16 2008-02-20
Last message processing started 16:06:01 2008-02-20, Error: Module exception java.lang.ClassCastException found last retry interval started 16:06:01 2008-02-20
length 5,000 secs
Does anyone migth no what could be the problem? There are very simple mappings, 1 to 1, no conversion of any kind.
Thanks
FelipeRaj,
Please note that the Scenario that I'm setting up it is simple FILE to FILE scenario.
The error showed in the Adapter Monitor is this one:
Sender Adapter v1014 for Party '', Service 'BS_File_transfer':
Configured at 19:15:28 2008-02-20
Last message processing started 19:24:23 2008-02-20, Error: Module exception java.lang.ClassCastException found
last retry interval started 19:24:23 2008-02-20
length 5,000 secs
The JDBC Driver error (what I told you, relates to the driver, connection, etc)
Sender Adapter v0915 for Party '', Service 'BS_File_sinMM':
Configured at 19:03:51 2008-02-20
Processing Error: Loading jdbc driver 'oracle.jdbc.driver.OracleDriver' failed: java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
Found in negative cache
Loader Info -
ClassLoader name: [service:com.sap.aii.adapter.jdbc.svc]
Parent loader name: [Frame ClassLoader]
References:
service:com.sap.aii.af.cpa.svc
service:com.sap.aii.af.ms.svc
service:com.sap.aii.af.svc
service:com.sap.aii.adapter.xi.svc
library:com.sap.aii.af.lib
library:com.sap.aii.messaging.runtime
library:com.sap.xi.util.misc
common:service:iiop;service:naming;service:p4;service:ts
common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:com.sap.security.core.ume.service;service:connector;service:dbpool;service:keystore;service:security;service:userstore
library:ejb20
library:sapxmltoolkit
library:com.sap.guid
library:com.sap.tc.Logging
library:jms
Resources:
C:\usr\sap\DEX\DVEBMGS04\j2ee\cluster\server0\bin\services\com.sap.aii.adapter.jdbc.svc\aii_adapter_jdbc_svc.jar
Loading model: {parent,local,references}
Available JDBC drivers:
No deployed JDBC Drivers found
Still here...
Felipe
Edited by: Felipe Andres Contreras on Feb 20, 2008 11:24 PM -
Hello All,
I have done new server installation and doing File to File Scenario .while doing this scenario file was picked but my error is "no message are available in the SXI_MONI".I checked Adapter Monitoring Source Communaction channal was green status and Up and running: Last message processing started reciver communaction channel also green status but Up and running - no message processing until now.finely i did not get out file in the reciver adapater.so pls gudie me .
regards,
ramesh.Hi,
1. try setting all loggins on (except syncs you won't need then in file to file scenario)
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
2. try checkking if your file was sent from the adapter framework to the integration engine with this monitor:
http://hostname:portnumber/MessagingSystem/monitor/monitor.jsp
Regards,
michal -
Hi All,
I am trying a Flat File 2 File Scenario ...
my input file is..
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:MTYP_name xmlns:ns0="File_File">Mustafa</ns0:MTYP_name>
I am just doing simple mapping of single field, but I am getting the following error..
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>internal server error: com.sap.aii.messaging.mo.MalformedMessageException: Cannot find Main Header in XMBMessage - check the message version</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html> <head> <title>Transport Service Error</title> </head> <body> <h1>HTTP/1.0 500</h1> <h3>internal server error: com.sap.aii.messaging.mo.MalformedMessageException: Cannot find Main Header in XMBMessage - check the message version</h3> </body> </html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 500 with the description internal server error: com.sap.aii.messaging.mo.MalformedMessageException: Cannot find Main Header in XMBMessage - check the message version XML tag Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What is the cause of this error and also how do I change the trace logging levels?
regards,
MustafaHi Raj,
Iam sending the Inbound payload
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_DB2_S_FF xmlns:ns="http://gsll.com/DB2">
- <RSETSTRUCT>
<S1>A</S1>
<S2>A</S2>
<S3>A</S3>
</RSETSTRUCT>
- <RSETSTRUCT>
<S1>B</S1>
<S2>B</S2>
<S3>B</S3>
</RSETSTRUCT>
</ns:MT_DB2_S_FF>
regads,
Jeevan -
Hi,
In a simple file to file scenario
I wanted to send a text file (notepad) but i wanted to receive it as a xml file---is it possible ?
I got the following status information in sxmb_moni. I want to what is the error? anybody pls help me out in this ?
During the application mapping
com/sap/xi/tf/_f2xml_mm_ a
com.sap.aii.utilxi.misc.api.BaseRuntimeException
was thrown: RuntimeException in Message-Mapping
transformatio~Hi Pankaj,
XI understands ONLY XML. All messages to and from XI are always XML messages.
Now, if the file being placed by your Legacy System is not going to be an XML file, then you can use the content conversion of your sender File adapter to convert this non XML file to an XML file.
Basic point, all messages that reach the inegration engine of XI need to be in XML format and so you need content conversion to conevrt non xml to xml and vice versa.
Please go thru the links provided by Chandra and also the following links for step by step procedure to do the same:
http://help.sap.com/saphelp_erp2005/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
And in your case once you do the content conversion at the sender side, the rest of the steps are the same as any File to file Scenario... For a sample file to file Scenario go through my reply in thread given,
Re: File To File
I hope I have answered your query.
Regards,
Abhy -
IDOC to FILE Scenario-Error in defining Adapter specific Identfier
Hi All,
I am configuring IDOC to FILE scenario where IDOC will be send from ECC to PI System.I did following configuration
I created RFC,PORT,LS and Partner Profile on R/3 System. I had maintained SLD and IR. In ID I created Configuration scenario and business system.When I click on menu->Adapter specific Identfier where I want to specify IDOC Adapter and RFC Adapter. But it is not allowing to edit it is not editable. As we provide LOGICAL SYSTEM,sender system ID and client number of the sender system.Hi Kavi,
I assume you correctly filled the Logical System of your Business System in the SLD...
Then in Integration Direction, use menu "SLD clear cache".
Always in Integration Direction, open your Business System, go to menu "adapter specific identifier", and... close to button "close", you should have another button like something ''check'' or "compare to SLD' or ''retreive SDL data'' (I have not an openned PI to check the right term). Use this button to get value stored in SLD to this local definition.
Mickael -
FIle scenario error - file not copied to destination folder
Hi,
I am workin on sample file to file scenario.I am using transport protocol as FTP. I had made one system as ftp and placed 2 folders in it, sender and receiver ,wat i am tryin to do is,pick xi_inputfile.xml from sender folder and place it in destination folder.
after completing the settings in IR and ID, whn i am looking in RWB message monitoring, its showing msg status as successful but in the interface it is showing exception.and file is nt copied into receiver folder
I want to know how can I see what is that exception.
Other thing is when I am going in detail of msg , in message content tab it is showing
com.sap.aii.af.ra.ms.api.DeliveryException=Message failed by admin.
Thanks.Reactivate the channel from ID.
Refresh Adapter Engine cache (mode=full) then test by sending new message.
For full CPACache refresh
http://<hostname>:<port>/CPACache/refresh?mode=full
hostname = where xi is installed
port = 5<instance no.>00
Check IR mapping is correct and Ur is having authorization with Basis Team. Unless , resend the message by basis id. -
Hi gurus,
I am trying to send IORDER01(pm order) from an R/3 system to a file, which works fine.
but when i try to use some business logic like if order type = 'PM01' then only i have to write to the file, using ccBPM, it fails...
this is my first BPM scenario and am having trouble....have read lot of blogs etc...can u please tell me where i am going wrong...
I have a data type DT_FILE for writing to the file.
I have interfaces:
si_oa_iorder(outbound asynchronous interface for file)
si_aa_iorder(abstract asynchronous interface for idoc)
si_aa_file( abstract asynchronous interface for file)
si_ia_file (inbound asynchronous interface for file)
I have message mapping MM_IORDER2FILE mapping IDoc to flat file structure
I have operation mapping OM_IORDER2FILE where I have mapped si_aa_iorder and si_aa_file
(( Is this right? are both abstract interfaces to be mapped? or do i need to create more mappings like si_oa_iorder to si_aa_iorder etc? please clarify...))
My IP is very simple with just a 'recv step' having container element of type si_aa_iorder and 'send step' having container element of type si_aa_file to start with..i haven't yet put the switch control etc...even such simple IP fails....
I have created Configuration objects like
Business System for file receiver
Business component for Idoc sender with adapter specific details set
Communication channels for Idoc and file adapters
No sender agreement as it is Idoc communication
Receiver agreement between the Integration Process(IP_IORDER2FILE) and the file server
2 Receiver determinations between BC_idoc_send to IP and other from IP to FileRecv system
2 interface determinations , one from si_oa_iorder of BC_idoc_send to IP and other from si_aa_file of IP to file recv system.
This is my setup and this fails....
My question is..is my message mapping and operation mappings correct? and can u see any obvious blunders i am doing?
please bear in mind that with same interfaces and sending and recv components, it runs fine without BPM....so please look at the BPM bit of mappings/config that i might have missed and please advice asap..
Thanks in advance and i am sure there would be lot of gurus for whome it is just a peanut...so please reply...
Regards
JhansiHello,
I am trying to implement one pi scenario :
File -> file adapter -> ccBPM -> soap receiver adapter -> web service request -> web service response -> ccBPM -> output file adapter.
The web service that I call works file from wsnavigator. I have created all the design and configuration objects
needed for the scenario.
I place a file with following contents:
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
<pns:GetSetNameWS xmlns:pns="urn:file2soap2fileWSVi">
<pns:name1>ajeet</pns:name1>
<pns:name2>phadnis</pns:name2>
</pns:GetSetNameWS>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
When I look at the process monitor I get this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Receiver Determination
-->
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have no clue about this error. Can you help me with this ?
If yes I can send you more details, if you liked
Hoping to get help from you,
Cheers,
Ajeet Phadnis -
File to File Scenario: Error Occured
The following error were displayed in the communication channel monitoring for the Sender FTP Adapter
1.An error occurred while connecting to the 11.10.10.41FTP server . The FTP server returned the following error message: 'com.sap.aii.adapter.file._ftp.FTPEx: 550 CWD failed. "/XI_Test_Files/In": directory not found.'. For details, contact your FTP server vendor.
i have checked the FTP server , it is running fine.The path is also correct. even though i am getting the above error . Please try to resolve my issue.Hi,
Open the Folder through Run Option( like //XI_Test_Files/In)
Ping the FTP Server from Run commad( like ping 172.13.12.1)
Can you Paste you Sender FTP Communication channel for more clarity
Regards
Seshagiri
Maybe you are looking for
-
Can't set up airport express with new Airport Extreme
I have a new aiport extreme base station and two airport expresses. All was well till I tried to plug in a hard drive then the base station needed to be reset. Now I can't get it to recognize the aiport expresses. I have to do a factory reset on the
-
Can't connect Macbook Pro Retina to Dell P2715q 4k Monitor
I received a new Dell 4k P2715q monitor on Friday. It came with a mini DP to DP cable which I immediately hooked into the Thunderbolt port on my 15-inch, Mid 2012 Macbook Pro Retina. It worked beautifully on Friday all through the day. Was very ha
-
I have some mathematical code I got from a colleague at work. He writes in LabView 7.0 and I write in Labview 6.0. I would like to somehow open this file and 'recompile' it in LabView 6.0 so I can re-use the code without having to re-enter it all in
-
CJI3 report not displaying values correctly in the "Total Quantity" field
Dear Friends, Need your assistance on the issue explained below, In our project there is a scenario where the actuals posted on a WBS are split/distributed to various WBS.These actuals that are split can be CATS entries,manual posting (KB21) or posti
-
Mmy Idad says an error occurred and it won't update. What can I do to fix this?