WS Security Configuration error DELAY_L_ERE is inconsistent

Hello Colleagues,
if I try to activate the WS Securtiy Configuration (SE38 > WSS_SETUP) on a SAP ECC 6.0 System for a SAML Scenario over PI I get following notification:
WS Security Configuration
Service user 'DELAY_L_ERE' is inconsistent
Configuration for WS Security logon created
Service user 'DELAY_L_ERE' is consistent
Service: Name or password is incorrect (repeat logon)
The WS Security Configuration on PI was successfully without any errors!
Any ideas?
Many thanks in advanced!
Regards,
Jochen
Edited by: Jochen Schertel on Jun 18, 2010 10:43 AM

Hello Colleagues,
we found the solution.
Presumably it's required to have the profile "SAP_ALL" during executing WS Security Configuration.
Profile "SAP_ALL" solved the problem.
Regards,
Jochen

Similar Messages

BIPublisher Security Configuration error no input xdo file path is specifie

Hi All,
When i set Security model to oracle database got an error as following:
no input xdo file path is specified
and the folder catalog empty.
Thanks,

Hi All,
When i set Security model to oracle database got an error as following:
no input xdo file path is specified
and the folder catalog empty.
Thanks,

Error when creating security configuration

I am trying to create new security configuration via Web Service administration. I clicked on Add for adding users but I was getting this exception
JBWEB000309: type JBWEB000066: Exception report
JBWEB000068: message
JBWEB000069: description JBWEB000145: The server encountered an internal error that prevented it from fulfilling this request.
JBWEB000070: exception
java.lang.NullPointerException
atg.nucleus.Nucleus.getAbsoluteName(Nucleus.java:2566)
atg.nucleus.Nucleus.getAbsoluteName(Nucleus.java:2533)
atg.nucleus.GenericService.getAbsoluteName(GenericService.java:447)
atg.nucleus.GenericService.startService(GenericService.java:560)
atg.nucleus.NucleusNameResolver.startService(NucleusNameResolver.java:1751)
atg.nucleus.MultiRootNameResolver.configureAndStartService(MultiRootNameResolver.java:1219)
atg.nucleus.MultiRootNameResolver.bindAndConfigureService(MultiRootNameResolver.java:959)
atg.nucleus.MultiRootNameResolver.createFromName(MultiRootNameResolver.java:849)
atg.nucleus.MultiRootNameResolver.resolveName(MultiRootNameResolver.java:455)
atg.nucleus.ResolveNameHelperImpl.resolveName(ResolveNameHelperImpl.java:274)
atg.nucleus.MultiRootNameResolverFactory$RequestResolveNameHelper.resolveName(MultiRootNameResolverFactory.java:832)
atg.servlet.DynamoHttpServletRequest.resolveNameSingleNucleus(DynamoHttpServletRequest.java:3898)
atg.servlet.DynamoHttpServletRequest.resolveName(DynamoHttpServletRequest.java:3857)
atg.servlet.DynamoHttpServletRequest.resolveName(DynamoHttpServletRequest.java:3835)
atg.droplet.DropletDescriptorManager.getPropertyValue(DropletDescriptorManager.java:395)
atg.droplet.DropletDescriptorManager.getPropertyStringValue(DropletDescriptorManager.java:304)
atg.droplet.DropletDescriptor.getPropertyStringValue(DropletDescriptor.java:318)
_dasadmin_3._atg._dynamo._admin._en._webservice._choose_sindividuals$_Param_8_output.service(_choose_sindividuals.java:398)
atg.servlet.DynamoPageServlet.service(DynamoPageServlet.java:142)
atg.servlet.DynamoHttpServletRequest.serviceLocalParameter(DynamoHttpServletRequest.java:4428)
atg.servlet.DynamoHttpServletRequest.serviceLocalParameter(DynamoHttpServletRequest.java:4687)
atg.droplet.security.GetAllPrincipalsDroplet.service(GetAllPrincipalsDroplet.java:208)
atg.servlet.DynamoServlet.service(DynamoServlet.java:152)
atg.servlet.pagecompile.PageSubServlet.serviceServlet(PageSubServlet.java:255)
atg.servlet.pagecompile.PageSubServlet.serviceByName(PageSubServlet.java:212)
_dasadmin_3._atg._dynamo._admin._en._webservice._choose_sindividuals$_Param_10_output.service(_choose_sindividuals.java:608)
atg.servlet.DynamoPageServlet.service(DynamoPageServlet.java:142)
atg.servlet.DynamoHttpServletRequest.serviceLocalParameter(DynamoHttpServletRequest.java:4428)
atg.servlet.DynamoHttpServletRequest.serviceLocalParameter(DynamoHttpServletRequest.java:4687)
atg.webservice.GetSecurityItem.service(GetSecurityItem.java:154)
atg.servlet.DynamoServlet.service(DynamoServlet.java:152)
atg.servlet.pagecompile.PageSubServlet.serviceServlet(PageSubServlet.java:255)
atg.servlet.pagecompile.PageSubServlet.serviceByName(PageSubServlet.java:212)
_dasadmin_3._atg._dynamo._admin._en._webservice._choose_sindividuals._jspService(_choose_sindividuals.java:705)
atg.servlet.jsp.DynamoJspPageServlet._jspService(DynamoJspPageServlet.java:152)
atg.servlet.jsp.DynamoJspPageServlet._jspService(DynamoJspPageServlet.java:116)
atg.servlet.jsp.DynamoJspPageServlet.service(DynamoJspPageServlet.java:202)
atg.servlet.pagecompile.PageCompileServlet.service(PageCompileServlet.java:498)
atg.servlet.DynamoServlet.service(DynamoServlet.java:152)
Could anyone help me figure out the cause for this issue?
Message was edited by: Nick Glover-Oracle
(To add new lines to stack trace)

This is the operation that I am trying to expose
http://ech-10-157-132-76.mastercard.int:8080/userprofiling/usersession/loginUser?WSDL

Inconsistent Security Configuration - SSL

The problem appears to be that the version of WLS your using is only for
export, not domestic.
You should contact your account rep to discuss how to obtain a domestic
strenght kit
Paul Patrick
"Waldemar Thiel" <[email protected]> wrote in message
news:[email protected]..
Hi all
I've got certificate for my server (WBL 5.1) and ...
<Security> 1 certificate(s): fingerprint = b566b9920c64eb6f55d2e... -that is
ok.
<Security> WARNING: Exportable (weak) WebLogic Server build running and
domestic (full) strength SSL license detected. Only exportable strengthSSL
connections will be accepted.
<SSLListenThread> Inconsistent Security Configuration,java.lang.Exception:
Using a domestic (full) strength certificate with an exportable (weak)
strength WebLogic Server build.
<Security> Not listening for SSL: java.io.IOException: InconsistentSecurity
Configuration, java.lang.Exception: Using a domestic (full) strength
certificate with an exportable (weak) strength WebLogic Server build.
What to do ? Thanks for any help.
Waldemar Thiel
PS. my key is 1024 length... and CA is thawte

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

SQL Server Reporting Services Configuration Error(Subscription)

I have just deployed a new project on the server and i can successfully run report from the BI Site; [Server Name]\Reports and no issue there. But when i try to create Subscription for the same report; I am trying File Share and it throws error as given
below. Do i have to configure anything for subscription in the Reporting Services Configuration Tool???
I also have few questions regarding Configuration;
What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
Here is the error I am getting in the log file..
ReportingServicesService!library!b!06/17/2010-09:35:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for
more information., AuthzInitializeContextFromSid: Win32 error: 110;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
ReportingServicesService!library!b!06/17/2010-09:35:04:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
ReportingServicesService!subscription!b!06/17/2010-09:35:04:: Microsoft.ReportingServices.Diagnostics.Utilities.RSException: The report server has encountered a configuration error. See the report server log files for more information. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Authorization.Native.GetAuthzContextForUser(IntPtr userSid)
   at Microsoft.ReportingServices.Authorization.Native.IsAdmin(String userName)
   at Microsoft.ReportingServices.Authorization.WindowsAuthorization.IsAdmin(String userName, IntPtr userToken)
   at Microsoft.ReportingServices.Authorization.WindowsAuthorization.CheckAccess(String userName, IntPtr userToken, Byte[] secDesc, ReportOperation requiredOperation)
   at Microsoft.ReportingServices.Library.Security.CheckAccess(ItemType catItemType, Byte[] secDesc, ReportOperation rptOper)
   at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml,
ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc)
   at Microsoft.ReportingServices.Library.RSService._GetReportParameters(ClientRequest session, String report, String historyID, Boolean forRendering, NameValueCollection values, DatasourceCredentialsCollection credentials)
   at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters)
   at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
   at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute()
   at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
   at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]&
secondaryStreamNames)
   at Microsoft.ReportingServices.Library.ReportImpl.Render(String renderFormat, String deviceInfo)
   at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
   at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.Deliver(Notification notification)
I also get following error when I try to create email Subscriptoin
w3wp!processing!6!6/17/2010-09:58:53:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'. ---> System.Data.SqlClient.SqlException: Could not obtain information about Windows NT group/user 'THRY\RPUser',
error code 0x6e.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.ImpersonateUser()
   at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.Open()
   at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.ReportRuntimeDataSourceNode.OpenConnection(DataSource dataSourceObj, ReportProcessingContext pc)
   --- End of inner exception stack trace ---
Thanks,
RP

Hi RP,
For your first issue "cannpt create subscriptions", after analyzing the error logs, it seems to be caused to the service account for the Reporting Services service does not have proper permissions to invoke the WIN32 API.
The SQL Server Reporting Services invokes the Win32 API to impersonate user's permissions to write files to shared folder or call COM+ components.
In this case, we can change the service account to a account has permissions to invoke the Win32 API to solve the issue. For example, we can change the account to be NetworkService or LocalSystem:
1. Backup the encryption key using Reporting Serivces Configuration Manager.
2. Change the service account using Reporting Serivces Configuration Manager.
3. Restore the encryptiong key using Reporting Serivces Configuration Manager.
For your others questions, please see the following inline reply:
--What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
The account should be a Windows account or the SQL Server account, that has read permissions in the source data base at least.
--What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
The account must be a Windows user account. For best results, choose an account that has read permissions and network logon permissions to support connections to other computers. It must have read permissions on any external image or data file that you
want to use in a report. Do not specify a local account unless all report data sources and external images are stored on the report server computer. Use the account only for unattended report processing.
--What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
You are right. It must be a Windows account, which has permissions to access and write files to the shared folder.
For more information, please see:
Configuring the Report Server Service Account:
http://msdn.microsoft.com/en-us/library/ms160340.aspx
Execution Account (Reporting Services Configuration):
http://msdn.microsoft.com/en-us/library/ms181156.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

"Event code: 3008 Event message: A configuration error has occurred" while accessing the sharepoint site.

Hello All,
Wish You Happy New Year to All in advance.
while accessing the share point site i got the error message
Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: The element <forms> may only appear once in this section.
Source Error:
Line 104: 
Line 105: <forms loginUrl="/_layouts/log-in.aspx" />
Line 106: <forms loginUrl="/_layouts/log-in.aspx" />
Line 107: <forms loginUrl="/_layouts/log-in.aspx" />
Line 108: </authentication>
Source File: C:\Inetpub\wwwroot\wss\VirtualDirectories\4545\web.config    Line:
106
Version Information: Microsoft .NET Framework Version:2.0.50727.3662; ASP.NET Version:2.0.50727.3658
i have found event message in the event log
Event code: 3008
Event message: A configuration error has occurred.
Event ID: 523cefee6a0943948cf01b4e9f476fff
Event sequence: 77
Event occurrence: 76
Event detail code: 0
Exception information:
    Exception type: ConfigurationErrorsException
    Exception message: The element <forms> may only appear once in this section. (C:\Inetpub\wwwroot\wss\VirtualDirectories\4545\web.config line 106)
Request information:
    Request URL: http://beesppesxapp70:4545/_vti_bin/sitedata.asmx
    Request path: /_vti_bin/sitedata.asmx
    User host address: 172.16.20.80
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: abc\wss_setup
Thread information:
    Thread ID: 1
    Thread account name: abc\wss_setup
    Is impersonating: False
    Stack trace:    at System.Configuration.BaseConfigurationRecord.EvaluateOne(String[] keys, SectionInput input, Boolean isTrusted, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult)
   at System.Configuration.BaseConfigurationRecord.Evaluate(FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult, Boolean getLkg, Boolean getRuntimeObject, Object& result, Object& resultRuntimeObject)
   at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
   at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
   at System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName)
   at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index)
   at System.Web.Configuration.RuntimeConfig.get_Authentication()
   at System.Web.Security.FormsAuthenticationModule.Init(HttpApplication app)
   at System.Web.HttpApplication.InitModulesCommon()
   at System.Web.HttpApplication.InitInternal(HttpContext context, HttpApplicationState state, MethodInfo[] handlers)
   at System.Web.HttpApplicationFactory.GetNormalApplicationInstance(HttpContext context)
   at System.Web.HttpApplicationFactory.GetApplicationInstance(HttpContext context)
   at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
kindly advise me
Thank a lot in advance

Hi,
As per the error logs it seems you have the Form element twice in your web config file. Just take one or the other one out. if you did any changes in web. config file please share and elaborate little more about the changes if you have made recently before
the error.
Krishana Kumar http://www.mosstechnet-kk.com
Please mark the replies and Proposed as answer if they help and solve your issue

ERP 2005 IDES Installation UME Configuration Error

Hello All,
I am installing ERP 2005 SR2 .
At the step of UME Configuration it is stopped.
I restarted sapinst but no luck , again stoped sap with mmc and restarted the machine and started the sap and then started the sapinst but there was also no luck.
I really appreciate if some one can suggest me.Thanks a lot in advance
ERROR 2010-10-14 16:20:54
CJS-30059 Java EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile umconfigurator.log: 'Warning :
ERPTRAINING/sapmnt/ER5/SYS/global/security/lib/tools/w3c_http.jar file stated but does not exist !Exception occurred in openJar(
ERPTRAINING\sapmnt\ER5\SYS\global\security\lib\tools\iaik_ssl.jar ) : java.util.zip.ZipException: The specified network name is no longer available at java.util.zip.ZipFile.open(Native Method) at java.util.zip.ZipFile.<init>(ZipFile.java:111) at java.util.jar.JarFile.<init>( JarFile.java:127) at java.util.jar.JarFile.<init>(JarFile.java:65) at com.sap.engine.offline.JarFilter.<init>(JarFilter.java:30) at com.sap.engine.offline.FileClassLoader.openJar(FileClassLoader.java:1131) at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:623) at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600) at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java :578) at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)Oct 14, 2010 4:20:52 PM Info: UME configurator (com.sap.security.tools.UMConfiguratorLoad) called for action "setup"PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.pathOct 14, 2010 4:20:53 PM Error: main() [EXCEPTION] com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB. at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool .<init>(DBConnectionPool.java:115) at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38) at com.sap.engine.core.configuration.impl.cache.ConfigurationCache .<init>(ConfigurationCache.java:149) at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236) at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl .<init>(ConfigurationManagerBootstrapImpl.java:60) at com.sap.security.tools.UMConfigModel.<init>(UMConfigModel.java:79) at com.sap.security.tools.UMConfiguratorLoad.main(UMConfiguratorLoad.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke( Method.java:324) at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
ERPTRAINING/sapmnt/ER5/SYS/global/security/data/SecStore.properties" is invalid: record with key "$internal/mode" is missing.. at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106) at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145) at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226) at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName (OpenSQLDataSourceImpl.java:197) at com.sa
p.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:112) ... 11 moreCaused by: com.sap.security.core.server.secstorefs.FileInvalidException : File "
ERPTRAINING/sapmnt/ER5/SYS/global/security/data/SecStore.properties" is invalid: record with key "$internal/mode" is missing. at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:391) at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946) at com.sap.sql.connect.OpenSQLConnectInfo.getStore (OpenSQLConnectInfo.java:802) at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783) at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209) ... 13 more
ERROR 2010-10-14 16:20:54
FCO-00011 The step runUMConfigurator with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Doublestack|ind|ind|ind|ind|1|0|runUMConfigurator was executed with status ERROR .

Hi Basis,
Note 848950/851251 may solve your problems.
If problem persists, then try copying the CD again to dump location and restart the installation , it appears that sapinst is not able to open jar file.
Hope this is useful
Regards
Umesh

I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

"Security policy error" while setting up "Microsoft Exchange Hosted Services" Exchange Account (corporate user)

I'm a corporate user with a very large company that is using Microsoft Hosted Exchange services actually hosted by Microsoft employees at their facilities. I called Palm support and they were clueless and zero help. The lady pointed me to some Palm KB article that I had already read and only remotely had anything to do with my problem. I see nothing on this error message in the forums and google searches. Sprint has even replaced my palm pre due to other reasons and the same error occurs after I configure the exchange account. I'm also seeing the error when I configure my account on my wifes brand new pixi. Both our pre and pixi already have exchange accounts successfully configured on our phones that are hosted by sherweb. The sherweb exchange accounts work without issue. I have tried configuring this microsoft hosted exchange account 5-6 times with the same result. It accepts my configuration information and adds it to the list of available email accounts in the pre. However, it keeps popping up this message stating "Security policy error: "Exchange... Tap for details" (with a yellow exclamation mark). Then it says "Security Policy Error" The account Exchange (first part of my email address) is disabled because security policies cannot be set." "Leave it disabled" or "Remove Account". I know something is working because it enforced a Password or Pin policy on to my phone which is not required unless this account has been added. I can also see it in the "Mobile Devices" section of web outlook when I login. This is the place in web outlook where you can see the last time the device synced, where you can remote wipe the phone etc. If anyone has any idea how to resolve my issue please post. Any ideas? I'm fresh out of ideas on this problem and very frustrated with Palm Developers. Just another example of poor development and testing practices by Palm. I hope they correct this issue on subsequent releases but I am only marginally optimistic that they will ever get this exchange mail support to the level necessary to support large corporations. What I do know is that my Microsoft Hosted Exchange account works fine on a Windows Mobile phone and a iPhone 3GS (confirmed by other coworks who have configured their phones using our exchange services). As a result, I have no choice but to blame Palm for this problem instead of Microsoft. Palm please fully support microsoft exchange mail users!!!!
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.

From my understanding of EAS and PDA devices, if the server as a policy to enforce and the device cannot provide that policy then the server will not allow the device to connect. The KB I gave you has a listing of what policies the devices supports, if your server supports more than that then it could deny the connection. As for what the iPhone does and does not do we cannot answer that due to we are not iPhone.
I did find an article that may explain a little better for PDA and exchange: http://www.infoworld.com/d/mobilize/how-avoid-smartphone-exchange-policy-lie-004

Configure: error: Cannot find php-config

After security update 2008-002 for Leopard, the PHP module builder stops, because the PHP version running on the machine doesn't match the header files from the PHP-developer part. More info see: http://www.naquah.net/blog/dennis/2008/03/20/how-to-get-eaccelerator-working-aga in-after-installing-security-update-2008-0#comment-50
After editing /usr/bin/php-config
Change
version="5.2.4" to version="5.2.5" and
vernum="50204" to vernum="50205"
and /usr/include/php/main/php_version.h
Change
#define PHPRELEASEVERSION 4 to #define PHPRELEASEVERSION 5
#define PHP_VERSION "5.2.4" to #define PHP_VERSION "5.2.5" and
#define PHPVERSIONID 50204 to #define PHPVERSIONID 50205
the ./configure command stops with a:
configure: error: Cannot find php-config. Please use --with-php-config=PATH
even when explicitly specifying the php-config location, the ./configure --with-php-config=/usr/bin/php-config command still throws an identical error.
The file is there, accessible and not empty:
$ ls -l /usr/bin/php-config
-r-xr-xr-x 1 root wheel 3031 22 mrt 21:44 /usr/bin/php-config
$ head /usr/bin/php-config
#! /bin/sh
SED="/usr/bin/sed"
prefix="/usr"
exec_prefix="${prefix}"
version="5.2.5"
vernum="50205"
include_dir="${prefix}/include/php"
includes="-I$include_dir -I$include_dir/main -I$include_dir/TSRM -I$include_dir/Zend -I$include_dir/ext -I$include_dir/ext/date/lib"
ldflags=" -L/usr/lib/mysql"
Re installing Xcode 3.0 didn't solve the problem.
What could be done to repair the (php) configure command, to allow me to build php modules again?

On my installation I have both NVidia and mesa drivers installed, thus two sets of GL headers/libraries.
For Mesa: SUNWxorg-mesa
Nvidia: NVDAgraphics
If you want to develop on your system you may want to install much more than just GL headers.
Its a pity that Solaris packaging is not really flexible, so you better do a full install indeed...
regards,
__Fedor.

Enable the security configuration for this panel

Why do my panels built with Configurator sometimes display
this in Ps Cs4?
"Please close all panels or restart Photoshop to enable the
security configuration for this panel"
Closing panels or restarting Photoshop does not enable the
panels but exporting from Configurator does enable them. Why do I
have to keep exporting?

I believe I have stumbled on the answer to this problem, so I
would like to pass it along to any other users who have a similar
problem.
My experience is that this is an intermittent problem, so I
asked myself what do I do from time to time that could be causing
this difficulty. The answer is I use a program called CC cleaner to
clean out temporary files (that in theory I don't need). I found
that after running CC cleaner, I have to re-export the
configuration file (as I get the error message described in an
earlier posting) so that the configurator panel subsequently opens
properly when I open up C S 4.
I immediately ran CC cleaner again and found that it wanted
to delete only one group of files that were located in the
following folder:
C:\Documents and settings\user's name\application
data\Macromedia\flash player\*.*
Accordingly, I instructed " CC cleaner", to exclude this
folder and everything in it (from deletion):
Now if I run CC cleaner to get rid of all my temporary
Internet files and other temporary files, but it leaves the above
folder untouched, and so far the configurator panel opens up
properly in Photoshop.
I don't use Windows "disk cleaner" so I'm not sure whether or
not this cleaner represents a potential problem. In any event it's
the Macromedia folder described above that causes the problem.
It's clear that Adobe configurator uses Macromedia flash to
do its thing, so hopefully I've solve this problem
long-term.

Software updater configuration error

Hope somebody can help...
I tried to update my N95's firmware via the Nokia Software Updater.
It was downloading the file (about 135mb) just fine when an error occured after it downloaded around 80mb . I did not make note of the error unfortunately. Now when starting the NSU, the starting screen appears and idles for about 2 minutes. The updater will not start up and comes back with an message saying: "configuration error"
I have tried to uninstal and re-instal, uninstal and deleting remaining folders that are left behind but no luck. I also tried the port scanning thingy that Nokia suggested but could not find only closed ports on IP Address 127.0.0.1 between 62700-62750.
So the odd thing is that it worked fine at first and now won't even startup, No firewall settings were changed.
I would appreciate any suggestions
I run windows Vista home premium.
Thanks

Willowy wrote:
I know it's been a while, but I found another way to solve the annoying "configuration error" and I'd leave it here for someone else. Nokia tells you to turn off the Internet File Sharing in the FAQ of the NSU. Here it didn't work. So I decided if it is a network problem than I'd turn off the ICS. It worked and I didn't have to turn off any of my security software (firewall and antivirus). So.
Start menu > Execute (or use the Search box in the start menu of Windows Vista) > Services > Find ICS in the list of services > Right mouse > Stop. Now NSU will find the new firmware.
Please turn on the ICS again after you finish the update.
Thanks man! This has been my problem for such a long time!

Java Security Configuration Assistant fails to install

Hello,
I have a problem because Oracle Application Server 10g for Windows doesnt install. I have tried several times on various systems, but every time I have the same error when the installer comes to the "Java Security Configuration Assistant"
The command being spawned is:
C:\oracle2\product\10.1.0\Db_1/jdk/bin/javaw -Djava.net.preferIPv4Stack=true -classpath C:\oracle2\product\10.1.0\Db_1\dcm\lib\dcm.jar;C:\oracle2\product\10.1.0\Db_1\j2ee\home\jazn.jar;C:\oracle2\product\10.1.0\Db_1\j2ee\home\lib\jaas.jar;C:\oracle2\product\10.1.0\Db_1\j2ee\home\oc4j.jar;C:\oracle2\product\10.1.0\Db_1\jlib\ojmisc.jar -Doracle.security.jazn.config=C:\oracle2\product\10.1.0\Db_1\j2ee\home\jazn\install\jazn.xml oracle.security.jazn.util.JAZNInstallHelper -log C:\oracle2\product\10.1.0\Db_1\cfgtoollogs\jaznca.log -realm jazn.com -user admin -oldpwd welcome -newpwd 05f2d5c792fb24147255fbe8169f54594b -oh C:\oracle2\product\10.1.0\Db_1 -clearpwd false
Only the first parameter is interesting :
C:\oracle2\product\10.1.0\Db_1/jdk/bin/javaw
It has a mixture of slahes (/) and backslashes (\), the first half C:\oracle2\product\10.1.0\ is ok but the second half Db_1/jdk/bin/javaw is not compatible with windows (slahes are for unix path only), so it obviously doesnt work because this path with a mixture of / and \ is not correct. At this point, the installation of Oracle AS fails.
Does anybody know a cause for this, or a workaround to get AS installed ? Thanks

The mixture of slashes and backslashes isn't an issue for Windows. I have examined the failure of the assistant, but with the new release of AS10g (release 2), I would like to know if you still have the problem you describe.

Sup 2.1.3 new security configuration problems

Hi all,
I created a new security configuration. In the new security configuration I configured for OpenLdap. Then I deployed my MBOs with a new security configuration.
but, when I try to register the devices a error appear:
May 6 09:19:45 dreifs-mini-ipad TEST[2433] <Warning>: onRegistrationStatusChanged: status = REGISTRATION_ERROR, code = 14850, message = SUPApplicationError_REGISTRATION_TEMPLATE_NOT_FOUND
What could be problem?
thanks in advance,
david

Please mark this Discussion with a Correct Answer and Helpful Answer where appropriate. See http://scn.sap.com/community/support/blog/2013/04/03/how-to-close-a-discussion-and-why Even if you discovered the solution without any outside contributions, it helps others to understand what the solution turned out to be.
Regards, Mike
SAP Customer Experience Group - CEG

WS Security Configuration error DELAY_L_ERE is inconsistent

Similar Messages

Maybe you are looking for