WS-X6848-SFP module are supported with LMS Prime 4.1 and 4.2

Hi,
I would like to know if WS-X6848-SFP modules are supported with LMS Prime 4.1 and 4.2.
Thanks for your help,
SILVIA

It looks like they just added the WS-X6848-TX variant with the latest C6000IOS CiscoView package update (Version 37, dated 31 July 2012 - readme)
I'd expect the -SFP variant should be in the next update.
You should open a TAC case to make sure that it's brought to the attention of the dev team if they aren't already working on it. One of the tenets of Cisco Prime LMS is "Day 1 support" of new devices.

Similar Messages

  • Which c-series modules are compatible with Scan Mode?

    OK, so I just wasted 4 hours.
    I started a new Project with a need to use a 9220 analogue input card on a cRIO 9030, but immediately became stuck when I was unable to add the module using the right click Add New C-Series Module wizard to the 9030 chassis.
    My first (and only) assumption was that this was a new card and I needed the latest Device Drivers. So I installed those.
    When that failed I upgraded my LV2014 to LV2014 SP1, and also upgraded the Real-Time and FPGA modules too.
    4 hours later, when that failed, I realised that maybe this isn't a card compatible with Scan Mode so began searching ni.com for information. I've searched a whole raft of terms and I just cannot find information on which modules are supported by Scan Mode (which is presumably nearly all of them). I know it exists somewhere because I one referred to it when I had an RS485 module that was only compatible in FPGA mode, about four years ago.
    So:
    1. Is there an easy way to determine if a C-Series module is compatible with Scan Mode? I still don't know!
    2. Can we please have Scan Mode compatibility shown in the Add C-Seris Module Wizard. When attempting to add a module to a cRIO chassis, the wizard can hint to us that a particular module is not compatible. By not showing the 9220 in the drop down list I was led to believe the module was not a known device (and hence I attempted to upgrade my drivers). It would be better if the module was listed but disabled and not selectable, with some informational text to explain why. It's a fair assumption that a module will be compatible, so we don't expect it to not be listed when we attempt to add it. In fact, the possibility that some modules aren't compatible can evade your consciousness temporarily and make you do stupid things (like upgrade your installation!).
    3. Can we please have Scan Mode compatability information put on each module's description page. That would have made this whole process much quicker.
    Thoric (CLA, CLED, CTD and LabVIEW Champion)

    Well, I definitely agree that finding info about RSI module support is not as easy as it should be. Since I know where to look, I will refer you to this document, which I found linked from this page.
    That's the best document I know of on the topic.
    Cheers!
    TJ G

  • What modules are included with my license

    Hi,
    I am using ECC 6.0. I would like to know what modules are included with my license. For eg. SD, MM, FICO and whether we also have CRM or EP with our package? How do we find that out? Please help.
    Cheers

    Call you SAP Account Manager

  • JPG files copied to Philips Picopix 3410 are currupted with a prefix of ._ and will not display on the PicoPix

    JPG files copied to Philips Picopix 3410 are currupted with a prefix of ._ and will not display on the PicoPix. Help please?

    There are a couple of ways to remove these items from the drive.
    One is with the $15 shareware app, BlueHarvest. It will remove the AppleDouble files from the drives you want the ._ files removed from, and has an option to prevent them from being written to non Apple formatted drives in the first place.
    But the free and pretty easy way to do it is to use Terminal. From what I can see in the manual for your projector, you can only get images to it on either an SD card or a USB flash drive. So I'm going to assume a USB drive for the following.
    Plug in your MS-DOS formatted drive so it appears on the Mac desktop. Open Terminal and enter:
    dot_clean -m
    Enter a space after the -m . Then drag and drop the icon of your flash drive into the Terminal window. It will fill in the path of the drive. Press Enter. All ._ files will be removed from that volume.
    Actually, I think it removes all files that start with a period. None of which are of any great importance on a DOS formatted drive. Such as the hidden trash for that drive. The next time you plug the drive in, OS X will simply recreate it.

  • HT3395 What are some camcorders that are compabtible with the mac book pro and also records high quality youtube videos?

    What are some camcorders that are compabtible with the mac book pro and also records high quality youtube videos?

    any camcorder using AVCHD…

  • Which JREs are shipped with Windows 98, NT, 2000 and XP

    me again
    I have a slightly different question
    Does anyone know which JREs are shipped with Win 98, NT, 2K and XP ? if any
    Or does anyone know where I can get this info

    Thanks
    Can You please elaborate on your answer. As I said I am a novice at this.
    Does this mean this one installation ensures that a java application will run on any of these 4 operating systems ?
    Thanks

  • What Modules are bundled with Oracle 11.03 Financials?

    I have a client that has 11.0.3 financials installed. They are only using GL, and AP. My question is, what modules were bundled with Oracle Financials in 1999. Do they license to the PO module? I know it was part of the FastForward Financials product. However, I can not find documentation for the standard product. Their license agreement on states Oracle Financials.

    I believe that Procurement was not part of Financials, just AR, AR, FA, GL, and I think CE.

  • What modules are available in Ltd CRM, Ltd Logitic and Ltd Finance User.

    Dear All,
             I just want to know what modules are available in Ltd. CRM, Ltd. Logsitic and Ltd. Finance User.
            If possible can anybody give me the link from where i can get information which template is accessble by which user.
    Regards
    Hitesh Parsawala

    Hi Hitesh,
    Complete details about new user types is available in the service
    market place in the path mentioned below
    https://service.sap.com/smb
    > License Key Requests
      > Additional Documentation
        > New Pricing and Licensing structure
    Also, refer to SAP Note : 1223477
    Regards,
    Vijay kumar
    SAP Business One Forums Team

  • Charging is not supported with this accessory iPhone 5 and lighting adapter

    I just received my 30 pin lighting adapter for my iPhone 5 and connected it to my existing BMW (2008 335i) factory 30 pin cable.
    The battery changes to the charge symbol for a few seconds and then I get a error on my phone that says "charging is not supported with this accessory".
    Other than that I am able to search and play music from my phone through my car's audio system without isssue.
    I have had this car for 4 years and used it with my 3rd generation iPod touch without issue. Wondering if anyone else is experiencing
    charging issues with the new adapter and their exisiting setups,

    I purchased the following adapter from Amazon for my 2009 335i, and all functions (including charging) work fine on my iPhone 5:
    http://www.amazon.com/gp/product/B004E5J61G/ref=oh_details_o03_s00_i00

  • What All in one printers are supported with 10.9?

    My HP C6380 will no longer scan with my Mac (Scan utility, Image Capture or Preview) and HP says they are not interested in fixing it. So I am shopping for a new All in One. I looked at the Airprint compatible printers (HP,Cannon, Epson), but they only seem to support 10.8 and below. What is compatible, is there an updated list?

    Here is a list of Airprint printers:
    http://support.apple.com/kb/HT4356
    Check the models on their websites as the should show the specs/requirements.
    FWIW, I just purchased an Epson XP810 and Airprint works well both with ML and Mavericks; I'm not so sure about its quality in scanning photos and will be contacting Epson about that issue.

  • How Long before 64 bit Browsers are supported with Flash?

    Much as the question says - most browsers are available in 64 bit versions ans 64 bit OS are common, so when is it likely to appear?

    i hate to say it this way, but perhaps when Adobe is actually ready to release 64bit flash players for all linux/mac/windows platforms.  that could take months to say the least.
    so far, I see little or no progress on adobe's part in providing 64bit flash support.  they did had a 64bit flash for linux pre-release back in early February 2010 on the Adobe Labs site.  that seems to be no longer available.

  • UPS monitoring support with Cisco Prime Infrastructure 1.2

    Dear Members,
    Good day,
    I am having a project implemented wherein i have the UPS power redudancy solution for our network devices.
    Now can anyone gide that is it possible for below :-
    UPS units installed with SNMP cards be monitored via Cisco Prime Infrastructure 1.2 as our monitoring & management solution is Cisco Prime Infrastructure 1.2 ?
    if yes
    Can you guide if following action would be possible to export the below logs from UPS unit to our Cisco Prime Infrastructure 1.2
       a) UPS fault status information
       b) UPS operational status(input power available Y/N)
       c) Battery fault status
       d) Battery charging current
       e) Battery charge level
       f) Output current
    Conclusion is we need to confirm that would it be posible to achieve remote monitoring of these UPS units via our CPI 1.2
    Thanks in Advance for your support & replies to this query.
    Regards,
    Muzammil N.

    Prime Infrastructure 1.2 can manage non-Cisco devices in a limited fashion via SNMP query and trap processing. It cannot import logs and does not have a generic syslog server,
    So if your devices have snmp read only support and can generate SNMP traps for the above you can add them to PI. Follow the manual add device procedure here.

  • Re: "no service" on iPhone 3Gs (version 4.3.2), my 3 kids all have iPhone 4 (version 4.1) with no issues! We are all with the same carrier (vodafone) and live in the same location. Please help me fix this!

    My iPhone 3Gs (version 4.3.2) has decided to no longer connect to my service provider/carrier (vodafone AU). There are 3 iPhone 4's (version 4.1) using the same carrier living in the same location, having no related issues. I have thought about updating firmware or restoring the iPhone, but not sure if thats the way to go?? My iPhone starts out recognising my carrier....searches & searches... but then.... connection "FAILS" and states "my network provider is no longer available"!!  Any suggestions?...please!!

    Anyone at all can advise- still not sorted :-(

  • The pages are loading with the letters to big and jumbled together

    When I go to websites the size of the letters are to big and the words are overlaying windows i need to fill in information (like online banking). I can use the control key and hit the - sign, but it distorts some information to small.

    If you have increased the minimum font size then try the default setting "none" as a high value can cause issues like you described.
    * Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    * Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
    See also:
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    You can use one of these extensions to set a default font size and page zoom on web pages:
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • Playlist folders are supported on the new Nano! (and Classic)

    Hi folks,
    You may have noticed that in iTunes 7.4, playlist folders now show up when selecting which playlists to sync to your iPod. Originally, people thought this was just cosmetic on the iTunes side.
    I am here to tell you now that it is not just cosmetic. The same folders that you create on iTunes will be ALSO shown on your new Nano (and Classic I assume). Previously, the navigation was:
    Playlists->Playlist
    Now it is:
    Playlists->Folder->Playlist
    Which also means you can hit Play on the Folder and it will play every playlist within that folder!

    Anyone able to figure out how the ipod sorts playlists within folders?
    On my itunes I have a folder of playlists for audiobooks. Within that, there's another folder for each nano and then playlists for the books on that nano. In ITunes, they appear in alphabetical order by playlist name, but on the Nano, it seems random: Here's a sample:
    Beaton
    Bond
    Brett
    Fletcher
    Lippman
    Robb
    Stout
    Crais?
    Wren
    Truman?
    Any suggestions would be appreciated.

Maybe you are looking for