WS14000075 - Error in Change PO approval

Hi,
    We are on SRM 5.0 (Server 5.5) with SP 11 and the back end is ECC 6.0. Scenario is Extended Classic. Activated WS14000075 ( standard, nothing added) for events SAVED and CHANGEVERSIONSAVED. It works ok when PO is created. When the PO changed we are getting the following error.
Steps                                                                  Work Item ID      Task ID
Workflow for Purchase order No. , Guid                1040              WS14000075
    Beginning of Fork
    Branch 1
         Wait for BUS2202 Events (Subworkflow)      1041               WS14000076
    Branch 2
    Set Excluded Agents
    Set Approval Status to 'Approved'
    Send E-mail to Approver?
    Update Purchase Order After Approval/Rejection    1042               WS14000077
          Check Approval Status
           Set Status of Purchase Order to Released           1043           TS14007956
Detail error message at workitem ID 1043
Work item 000000001043: Object BUS2201 method SETRELEASED cannot be executed
Message no. WL821
Diagnosis
The calling of the object method for the work item ended with a return value for which no handling is modeled in the workflow.
System Response
The work item was forced into the error status.
Procedure
Refer to your workflow system administrator.
Procedure for System Administration
Also check the binding between the task container and the method container.
Checked Note 962488, 981295.
Any help to resolve this error will be appreciated and rewarded.
Regards
Zee

Hi,
I usually get the error when document is locked by other user. After restarting workflow, the status was updated. Please check whether you get same error after restart in SWPR transaction.
Regards,
Masa

Similar Messages

How to change default approval for ResourceAuthorizerApproval ?

Hi,
I'am new in OIM and I follow documentation where I found some predefined workflows. I'd like to use them.
Could you tell me, step by step, how to change default approval for ResourceAuthorizerApproval (only for my new defined resource).
I'm using OIM 11g and Design Console 11.1.1.3.0.2.0

Ok, I made new tamplate (copy of existing one), there I changed Template Level Approval Process and set allowed resources. It seems to be ok :)
If there are other solutions please share with me
Thanks
M.

How to change an approver in shopping cart( by function module ) ?

Hello, i wish to change my approver ( not through the portal) but by function module ( or some other way) . Then, the creator of the SC will see the new approver in his cart details and also, when the new approver logs in, he will have the shopping cart in his list.
thx

Hi
you can use FM RH_UPDATE_SUBST_LIST_SERVER to substitute an approver from the backend
thanks
Nimish Sheth

Error after changing password in Discoverer Viewer (11.1.1.4)

I (and all other users) get the below error after changing the password used to login to Discoverer Viewer...
Weblogic Version 10.3.4
Discoverer Version 11.1.1.4
Error
The application encounters an invalid state. .
- java.rmi.RemoteException: ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1 ; nested exception is: oracle.discoiv.beans.ConnectionStoreException: ORA-6510: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1
I have already tried the following oracle note (which did not work): http://docs.oracle.com/cd/E17904_01/doc.1111/e14770/discoverer.htm#BABDJJBE
"43.1.1 Issues with Metadata Repository and Oracle Database 10g Release 1"
But we have Oracle Database 11g.
If anyone has any suggestions please advise. I have had a ticket open with Oracle Support now for a few months and they cannot reproduce.
Thanks,
Justin

We also see this same error when attempting to Create a Connection in Oracle BI Discoverer 11g. I am able to connect to a database but not able to save a connection to said database....
A connection error.
- Oracle BI Discoverer Viewer cannot save the connection. Check for other errors.
- ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1

I get an error while changing modules pop up when opening Lr. There is no import button to use and if I try to load the default catalog I get the error message again essentially making Lr completely unusable for me! please help

When launching Lr i get the initial screen to come up followed by an "error while changing modules" pop up. I have uninstalled and re-downloaded, followed all the suggested trouble shooting fixes and still nothing. When the app starts it has the basic info boxes but without any options in them (i.e. no import button or any buttons at all for that matter).All my other creative cloud apps seem to be working fine but Lr won't. Please help

Ah, see, you said you had done it differently before.
> and I tried to add a toolbox button by navigating to AcroPDF.dll.
You'll need to reinstall Reader if the libraries aren't registered. You can't register them manually.
Perhaps if you posted some of your code (where it creates the objects, etc.) we might be able to give you some more advice. You're sure you aren't trying to use anything outside of the AxAcroPDFLib.AxAcroPDF class?

I lost my connection when I was using internet and when I want to reconnect to airport it give me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hi,
I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hello there hastibahreini,
It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling

To change the approval limit for Extended attribute PO Value limits

Hi,
We are on SRM 4.0, in PPOMA_BBP for a local purchasing organisation we want to change the approval limit let us say from 100 to 50 but the system is presenting this field as non editable( In stabdard values sub screen)
In Extended attribute tab in organisation structure after selecting the PO Value limits in SRM 4.0 we see two sub screens
a) Standard values
b) Local values
We want to change the approval limit in standard values sub screen from 1000 to 500, which system is presenting as noneditable.
Regrds
Vivek

Hi
Refer these links.
http://help.sap.com/saphelp_srm50/helpdata/en/5a/af5efc85d011d2b42d006094b92d37/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/content.htm
http://help.sap.com/saphelp_srm50/helpdata/en/fa/fa7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/7f/0fea380bfe6161e10000000a11402f/frameset.htm
Incase it does not helps, pls let me know.
Regards
- Atul

Budget Exceeded error while changing in Account Assignment

Hi,
The user is facing an error while changing the Accounts assignment category to "Assets" in a PR. The PR was created with AAC as "U" for all the line items. The user is changing that to "A". After that he provides the asset number then the error is coming as below:
Item 010 Order 0809/A15 budget exceeded
Message no. BP604
Diagnosis
In document item 010 Order 0809/A15, budget for fiscal year 2010 was exceeded by 6,630.00 INR.
The valuation price for that particular line item is Rs 6630.00. I have not changed the other line items.
Need the suggestion.
JK

I think there some settings in Budgeting, n Finance people are more familiar with those settings. Normally, if u craete a Purchasing doc. PR or PO or GR/ IR from MM side, with account assnt., the relevant budget()which is created for that commitment item) will updated with the document value. There may be settings with delivery date or so. check with your FI guys
umakanth

Error while changing modules

On a Mac, did digital download from B&H. Has never worked because error while changing modules. Did EVERY step in forums. Nothing. Still under manufacturers warranty, need to talk to actual customer rep but only gives me option to post question on forum. So far this is more than annoying to have to deal with.

Hi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771>

Restricting a set of person on change first approver

Hi,
I have recently intergated AME for Purchase Requisitions on 11.5.10.2 - 11i.AME.B
I am now trying to restrict a set of HR people that can selected when a requisitoner tries to change first approver while raising a requisition in iProcurement. At the moment, the system is allowing any valid person from HR who has a valid entry in WF role.
Is there any way we can achive this?
Thanks in Advance.
Chetan

Same problem here. Batteries last about 10 days. Checked each with a digital multimeter. One battery was drained, the other was perfect.
I replaced the dead battery and marked the other one I left in. One week later, the new battery was dead. The marked battery was fine. The mouse is defective, it is only using the power on one side. Time for a return to the Apple Store. I hope it will be a quick swap.

CATS Hours change by Approver In Detailed Approval View

Hi,
1.Is it possible to change the Hours in detailed Approval view?
In CATS Approval WD, When Approver clicks on hours It will takes to Deatailed approval view, There is it possible to change the hours By Approver?. I need an option to change the hours entered by employee while approving.
Suppose Employee entered 10 hours for particular day and Released, When Approving Approver wants to change it to 9 hours and Approve. Is this possible in CATS approval via Portal?
2. How can I Change (Reject/Approve) the old records of workitem executed already in the past?
Approver might approved/Rejected some hours in the last month, Now he came to know that its wrong,
How can he reset that hours to Reject/Approve in the portal?
Can Anyone help in this?
Regards
Ram

Hi Ramesh,
Probably transaction CATS_APPR_LITE will help. Using this report you can reset the approval. But you can do it from backend.
Prajwal

Milestone Error when changing the status of service request.

Hi Expert.
I got an issue where service request is displayed with an error "Item 10: Start and end dates must be identical for a milestone date".
I took around 200 service requests and observed that in the change history, the response profile of the contract was changed. We also observed that whenever service request contain these errors, automatic change of status is not happening.
Unfortunately I'm not able to reproduce this error in Quality system.
Kindly advice on how these errors can be resolved and how these can be reproduced.
Thanks in advance.

You can ave a runitme event or workflow triggered that can generate such behavior.
First increase logging on your object manager (evtloglvl :) ) and look at any error message.
Second assess with your development team what automation has been setup ranging from script, Business Services, workflow to assist you in troubleshooting.
Best Regards
Evtloglvl

How to change the Approver in ESS development

Hi All,
I need to change the Approver in the ESS. Right now its taking the team lead in the organizational hierarchy but now it has to be changed to Project Manager which will be fetched from customal table. I was told to use BADI PT_GEN_REQ. How should I utilize this BADI to change the approver? or is there any other option. Could anyone help me regarding this.
Thanks & Regards
Ajo John

I assume this is occuring because you have your standard approval not set to auto complete. On your Standard Approval process definition, on the approve task, add the tcCompleteTask.
If that is not the issue then you need to modify your Self Registration to have an approve task assigned to the appropriate user you would like.
-Kevin

Error while changing between modules

Dear Know-it-All out there.
Iam a Newbie - Middlebie Photosop User , so to keep it short.
We just installed CC with Lightroom & PS. The problem „Error while changing between modules“.
is occurring while starting Lightroom and the program cannot be used properly.
There seems no chance to create a catalog properly, the Library just
does not open any menu which it should do.
Adobe Support could not work it out either so roar, their suggestions was
to restart in safety mode / deleting library 5plist / plus many more
little stuff which actually did not help. This is already the second installation ,
same problem as with the first. We are working on a IMac 2.9GHz, i5, 8GB 1600Mh, OSX 10.9
Any ideas? Thank you so much and kind regards.
Julia

Hi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771>

Error when changing the length of IO

Hi Experts,
I have changed the length of one of my Info-Object from NUMC-2 to NUMC-3. While trying to activate it it is giving the error "Structure Change at field Level(change Table)".
But When i changed the length of one more IO before from Char-1 to Char-3, it successfully got activated.
Please help me out.
Regards,
Pavan

Hi Ananda,
We cannot delete the master data.
Can Anyone pleasetell me why this IO is not getting activated when i change length from NUMC2 to NUMC3
I didn't face any problem when i changed the length of one of my IO from Char-1 to Char-3. It successfully got activated
But im facing this problem when I try to change the length of another IO from NUMC-2 to NUMC-3.
If anyone any any solution for this otherthan deleting the existing data, please do let me know.
Regards,
Pavan

WS14000075 - Error in Change PO approval

Similar Messages

Maybe you are looking for