WS14000109 N-Step limit, LastApproverName field in container not filled

Hi,
We are running BBPCRM40 SP8,
We are using WS14000109 workflow, when the approver reject the shopping cart the message in the task (TS10407972) starts by
&LASTAPPROVERNAME& has rejected
The problem is that field is not being filled out, I can't change the field because this task appears in other workflows.
Does anybody know how I can solve this?
thanks
Best regards

can suggest one workaround
In addition to yr current WF WS14000109,
also activate automatic approval WF.
For automatic WF engter the start condition as
the SC total value should be < 600 euro
and exclude this condition in WS14000109
means in start condition
SC total value should be > 600 euro
then below 600 euro SC will be auto approved.
BR
Dinesh

Similar Messages

Balancing field "Profit Center" not filled while doing F110

While posting document there is no error where as while clearing the document through F110 the error is shown as
"Balancing field Profit Center not filled " while doing F110.

Hi,
There could be various reasons why this error would come.
1. Check the settings for the new GL.
2. In particular,Check the configuration for classify GL accounts for document splitting and classify document type for document splitting.Also check config for zero balance clearing account.
3. Analyse the error on which line item the PC is not being filled.
Thanks
Aravind

Field Local Currency not filled

Hi
Field Local Currency not filled
Message no. /POSDW/CORE081
Diagnosis
Field Local Currency does not have a value (initial).
System Response
Current processing requires the field to be enriched within the master data checks.
Procedure for System Administration
Check Customizing for the master data checks.
Regards
Mark

hi
kindly implement SAP Note 19915 for Missing Customizing master data
You have to transfer the table entries in question manually.
there are two different procedures are possible:
1. Use a correction request to copy the relevant data
for example: in source: use Table view -> Transport to create a new
correction request (pushbutton "Create").
Select the entries you want to transport and use the "Add to corr."
button to add them to the correction and save.
In the target client, use CASE -> Tools -> Client copy -> Copy via
command file (TA SCC2) to perform the transport.
or
2. Use transaction OY19 (Customizing -> Tools -> Table compare)
to compare or replicate the respective tables.
regards
laksh

Cred.lim.used field in FD32 not getting updated

hi All,
I have a scenario where my Cred.lim.used field which is a %age value is not getting updated in fd32
when I go to fd33 for a customer my Credit limit is 1,000,000.00
and Credit exposure is 1,138.28- but the %age is 0.00 %.
any suggestions
thanks,

Hi
Think logically how it will show the credit limit used in percentage just calculate
credit limit used*100/ total credit limit
1,138.28*100
1,000,000.00
will come to 0.11 % so system wont show it will consider only if it is more than 1%
regards

Balancing field profit centre not filled

Hi all,
The transaction Iam trying to post in FI directly.
The entry I am posting is
Dr Cash 1000
Cr Sales 500 PC X
Cr Sales 500 PC Y
I want the cash account to be split with PC X 500 and PC Y 500. I am getting the error. balancing field profit centre is not filled in line item 001.
Can some one please guide. I have assigned cash account with item category 04000 and the document type Iam using is with unspecified category.
Thanks
Aravind

Hi Vineet,
Thanks for the reply. Let me summarise you what I have done.
1. Document splitting is active in the system.
2. Profit centre and segment scenarios are mandatory
3. Zero balancing clearing account has been defined.
4. Item category assigned to cash account is 04000.(Cash account)
5. Item category assigned to sales account is 30000(Revenue)
6. A new document has been created which is YV and is assigned with transaction variant 0000/0001.
7. Inheritance check box ticked in level of detail.
Please revert in case if further details are required.
Thanks
Aravind

FI Posting Error Balancing field "Profit Center" not filled-Vendor acc

Dear All,
System has been Configured the emp. loan and insurance deduction to be posted to respective vendor accounts. while making the FI posting system is throwing error like "Balancing field "Profit Center" in line item 001 not filled".
We have 8 profit centers. emp. loan deductions to be posted in vendor acc. across all the profit center wise. Business Area and Cost Center has been maintained properly for all employees in IT 0027 & IT 0001.
Doc. type also has classified for doc. splitting(spro>GL acc(new)>Bus. Trans --> Doc. Split --> Classify doc. type for split.).
How this issue can be solved, kindly help us out.
Regards,
Param.

Hi Murali,
You are correct,Standard SAP business transaction "0000" and variant "0001" - unspecified posting will not cater the above requirement.
Doc Type SA does not split. Either you can use "001" in front of SA doc type which I do not recomment, but else create a new Documnet type with 0001.
In standard configuration in many places SAP has used 0000 whcih does not split. You need to define new doc types as per your requirement and assign business transaction and variant to it as per business need.
Do let me know if it works.. else we can try something else..
Regards,
SAPFICO

Field Local currency not filled : POSDM Error

Dear Experts,
When I am posting a POS transaction( in /n/posdw/mon0 ) in SAP BW and trying to process 0001 - Supply BW without Distribution (Collective Processing) its giving me error that ---Field local currency not maintained. I have checked all POS configurations .Kindly Suggest me if I am missing anything in BW side.
Thanks & Regards
Rakesh

Dear Vikrant,
Thank you for your input. I have already loaded the master data.
But, with your suggestion I have checked the 0plant data in BI and found that Local currency is not maintained in the respective records. After maintaining the local currency manually , the error get resolved.
Kindly let me know, while pulling the Plant master from ERP to BI, why the local currency is not filled in the record. Suggest me to resolve this.
Thanks & regards
Rakesh

Reference field of invoice not filled in PO history

The reference field of the invoice (INFVO-XBLNR) is not copied into the EKBE-XBLNR. I couldn't find an OSS note to solve the problem. Please advise.
Kind regards,
Annerie Deckers

Hello,
Table EKBE is only updated if "GR-Based IV" indicator is active at Purchase order item level.
Only then field EKBE-XBLNR is updated with the value of the corresponding GR doc. reference field (MKPF-XBLNR) and not with the value of the RBKP-XBLNR (logistics invoice).
There is also a note explaining the case link:[Note 383828 - ME23N: Reference in the purchase order history]
BR,
Elly Leondi

Field 'changed by' not filled properly

Hi Experts,
When experts,
When a PO have changed and i look in changed documents or table CRMD_ORDER_ADMN_H the filed CHANGED_BY is not filled at the proper manner. For example i see the name of user FZE and must be 18FZE. I don't really know what is happenned. By the way, this problem doesn't occur at all the PO's.
Any help will be very appreciated.
Kind regards,
Sean Yakoub

Hi
Are you in classic ?
BR
Muthu

Is SOAP Adapter Action field can contain 2 or more "SOAP Actions"

Hi All,
I have following scenario:-
Step 1. Webmethod(sent price querry with material no)->R/3(search price from tables)
step 2. R/3(sent price)->Webmethod
step 3. Webmethod(sent quantity)->R/3(document created in sap)
step 4. R/3(sent confirmation doc no/error)->Webmethod
Q1 How can i implement above scenario in with one URL Webmethod????
(URL:http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel)
Q2 Is it possible with one (Receiver SOAP adapter->Conversion Parameters->SOAP Action) field can contain more than 1 SOAP Action......??????
With more than one message interfaces (inbound synchronous) in one scenario
Q3 Or I have to design two scenarios with two URL's????with different message interfaces (inbound synchronous) 
Q4 Or I use Sender(SOAP) Reciver(Rfc Adapter) in abave case??? With more than one message interfaces (inbound synchronous) in one scenario
Thanks & Regards
Message was edited by: Umesh R

When your scenario consists of sync calls, you have only to define SOAP sender channels. The best approach is to create two channels to keep the reference from interface to channel unique.
For the sync response message you do not need and communication channel (and no SOAP action).
Regards
Stefan

Error_42_Error occurred in deployment step 'Activate Features': Field type MyCustomField is not installed properly. Go to the list settings page to delete this field.

Has anyone encountered this error.
I am developing on SP 2010 with VS 2010.
I was following an online tutorial: How to use custom form templates in NewForm.aspx/EditForm.aspx located at:
http://sharepointbox.blogspot.co.at/2010/11/how-to-use-custom-form-templates-in.html
The tutorial was a little lacking on some of the direction, but it included the working source code, and I managed to complete it.
Every time I try to deploy my version I get the error: Error 42 Error occurred in deployment step 'Activate Features': Field type MyCustomField is not installed properly. Go to the list settings page to delete this field.
I have gone through my code line by line and matched it to the working code from the tutorial, so I can only assume that I am missing something in the Procedure to properly deploy.
Any help is greatly Appreciated!

It seems that something went wrong with your custom field type installation. Check below line in .xml file of your custom field type and correct it if needed.
<Field Name="FieldTypeClass">DocumentFieldType.DocumentFieldTypeClassName, DocumentFieldType, Version=1.0.0.0, Culture=neutral, PublicKeyToken=379382f3e8928835</Field>
Please recheck respective values of namespace.classname , dllname. and publickeytoken in your code
Thanks. Please mark it as an answer if it helps.

Update step limit name at run-time

I need to run through some test steps in a TestStand sequence multiple times. This wouldn't be a loop on a single step or group of steps but probably a goto a label "for" loop in TestStand. BTW, TestStand 2.0.1 calling code from a LabWindows/CVI DLL via the standard prototype adapter. Each iteration I need to have the test step limit names be updated with a different suffix. So step1 might have results0 and results1 and on the 2nd run results0 would be renamed to results0b. How do I update the limit names, at run-time, from a LabWindows/CVI function? I.e. the first test in the sequence's Main would update the steps below it to update the suffix. I started down the path of using TS_SeqContextGetProperty to get the sequence handle
TS_SeqContextGetProperty( testData->seqContextCVI, &errorInfo, TS_SeqContextSequence, CAVT_OBJHANDLE, &seq_hndl );
then using TS_SequenceGetNumSteps( seq_hndl, &errorInfo, TS_StepGroup_Main, &num_steps ) to determine the number of steps in the Main tab.
Enter a for loop:
TS_PropertyGetValString( testData->seqContextCVI, &errorInfo, buf, TS_PropOption_NoOptions, ( char ** )&rslt_name ) with buf as "Sequence.Main[0].Result.Measurement[0]" errors out with an invalid name message. The idea is to get this value, update it based on the iteration in TestStand ( this is already acquired and working ), and then set the value back. Then, move on to the next step and so forth.
Any suggestions?
Thanks.
-G-
Solved!
Go to Solution.

So, I tried the example and it works but only for a single step. I've tried two options: 1. having a single step that programmatically changes all the result names in all the other steps in the sequence. 2. having each step update the result names itself. For thought 1 the loop would run and the changes would occur but when the function was exited I'd get an exception from TestStand. No real information in the details as it looked like a memory corruption error. I then examined the details of what occurred and tried more experiments. If I had the loop have more than 1 iteration this behavior occurred. If I comment out the set function it still occurs. Then, for thought 2, it works like a champ on all the steps until I loop back to the top of the sequence. Then, on the first step ( 2nd time through ) it bombs out.
Attached is the code for the 2nd possible solution.
Does anyone know what the problem is or if there's a way to do this?
-G-
Attachments:
Change Step Name.txt ‏7 KB

Limit of fields in a Transformation

Hi gurus... the scenario is that i had an ODS (version BW3.5), i made a copy of this and I want to generate a transformation from the original ODS to the new ODS (version BI 7.0), my problem appear when i check that in the new ODS i have 2 characteristics, that i didn´t have in the source of transformation (old ODS). But into the old ODS, i can check that this characteristics exists!.. any idea?!¿?! anyone know the limit of fields in a transformation?

Hi,
check out those 2 missing fields, may be they are set up as attribute only and so only available in your old ods because it is not flagged for reporting. You might need to change the attribute only setting in the maintenance of the characteristics.
regards
Siggi

I'm trying to import contacts to outlook 2011 from a cvs file. I've followed all the steps, mapped the fields, clicked import -- it shows that it imported my 900 contacts --- but the contact field remains blank and I can't see any information. Help?

I'm trying to import contacts to outlook 2011 from a cvs file. I've followed all the steps, mapped the fields, etc. It appears to import all 900 contacts, but after finishing nothing appears in my contact list. Any ideas on why this is not working?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Hi Chhayank,
the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
~Florian

WS14000109 N-Step limit, LastApproverName field in container not filled

Similar Messages

Maybe you are looking for