WS14000133 not supporting the Back&forth processing , back to purchaser but

Dear Geeks,
we have SRM 5.5
i am using the sap standard template WS14000133 for the n-step approval and implemented the Badi BBP_WFL_APPROV_BADI. Everything is working fine . the issue is when the requistioner is logged in to the SAP SRM portal all the features are available except the "Back to Purchaser" and "Back to manager" pushbutton are not visible on the screen.
I suppose which indicates that the Workflow or the SRM portal is not supporting the Back & Forth processing where the requistioner has the facility to send the Workitem back to the approver who has made changes the shopping cart.
Can anyone please help me in finding a way to enable the above pushbuttons to be visible in the SRM portal screen.
Regards,
Altaf

Hi,
The issue is not with the Approve,Reject,submit or resubmit icons or buttons.
for the workflows which support back and forth processing there will be two extra buttons visible on portal screen.
1. Back to purchaser visible to the Approver
2. Back to Manager visible to the Requisitioner/creator of the shopping cart.
so this two buttons/ icons are not visible in SRM portal screen.
And this is the basic standard functionality provided by the SAP . here is the part of the documentation which supports the above statements.
"Back & Forth Processing
This property enables the creator and the current approver to change the document during approval.
Using the pushbutton Back to Purchaser, the approver can send the document back to the creator so that changes can be made. The purchaser/creator makes the changes and uses the pushbutton Back to Manager to send the changed document back to the last approver who then continues the approval process. (Depending on the type of authorization, the approver can also make changes, for example, and then notify the creator of the change using the back & forth procedure.)"

Similar Messages

HT204686 I bought an iPhone 4 from a youngster who had put his own Apple ID on it but could not remember the password. I backed it up yesterday and restored to my new iPhone and it copied the Apple ID across too. Now I have 2 phones with it on. Anything I

I bought an iPhone 4 from a youngster who had put his own Apple ID on it but could not remember the password. I backed it up yesterday and restored to my new iPhone and it copied the Apple ID across too. Now I have 2 phones with it on. Anything I do?

that must be really annoying !!
so this is what you call
FIND MY IPHONE ACTIVATION LOCK Find My iPhone Activation Lock - Apple Support
when you start using iCloud on any iOS device and enable find my iPhone, this prevents a new user from using it, and also prevents anyone from using the phone
as it is locked to previous owners account ,this is also the case if when a phone is lost or stolen.
the only way around this is to have the previous owner reset their apple id by going to @ applied.apple.com
if they are unable to do this, then the only other way around this is to have the previous owner get a copy of their original receipt and call apple support who can then lift this lock if they get a copy of the receipt
unfortunately there is no quick fix -> the below link explains what you should do before you sell or give away an iPhone
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support

Why does Silverlight install process state that my 64-bit Win Vista OS does NOT support the 64-bit version of Silverlight?

As of Monday 4/20, I've encountered a significant problem with Silverlight on my Vista PC.
Several weeks ago I read a brief item stating that Google would be dropping support for npapi and that it would affect Silverlight sometime in April. One of my key daily apps uses Silverlight, but I didn't receive notification from that software's author
about the pending change and how it would be handled. Successfully used the app every week (Mon-Fri) this month for 8-10 hrs/dy day (as I've been doing for the past ~5+ years: past year under Chrome, year before that under FireFox, ~3 prior years
under IE) and on Fri 4/17 shut it down for the weekend. When I booted up on Mon morning and tried to log into the key app however, it prompted me to download and install Silverlight, acting as though I never had it installed!
I recalled the earlier warning about Google dropping support, so I closed Chrome, started up FireFox, but got the same prompt from the app -- it directed me to install Silverlight. I downloaded it (had no choice as to which version, just got the "Silverlight_x64.exe"
file) and got part-way through the install when this error msg popped up: "Unable to Install Silverlight. Your operating system does not support the 64-bit version of Silverlight". WHAT?! Clicking on the "more info"
link led to this msg: "Message ID: 1518. Your operating system does not support the 64-bit version of Silverlight. Click here for the latest version of Silverlight." That link simply led back to the download page which resulted
in receiving another copy of the same executable file.
According to my system ( > Control Panel > System ), I'm running "Windows Vista Home Premium", with a "System Type: 64-bit Operating System". I've been using this same Vista PC since Sep 2008 and running Silverlight for
around the past 5 yrs.
? -- Why doe the Silverlight installer code flag my OS as not supported?
? -- Is there a way to get an older version of Silverlight that will run under Vista?
Thanks in advance for any helpful comments.

Andy -- Thanks for the link, but I'm not adventurous enough to download from a non-MSFT site.
Besides, since I didn't make any changes to my hardware/software config, I expect a MSFT rep to explain why their two programs suddenly stopped working together and then provide whatever code fix is needed. A phone call to their tech support (predictably)
led to nowhere but a recommendation to purchase one of the company's support offerings (which I declined to pursue). The Silverlight development team appears to participate in these forums, so I'd hope one or more of them offers a realistic solution.
Here's something I forgot to mention in my original post: In several of the threads on this subject (some dating back to 2008!), people have
suggested running IE as the browser vs FireFox or Chrome; however, that idea fails to note that the error msg (Message ID:1518) clearly states that "your operating
system does not support the 64-bit version of Silverlight"; it doesn't say anything about
what browser you're using.

Good morning a few weeks ago I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back, and I can not return it , i need to you sent me again the box for retu

Good morning a few weeks ago I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back, and I can not return it , i need to you sent me again the box for return the ipod

Best thing would be to call Apple up again, and let them what has happened and they'll help you!

BPE_adapter The process does not support the given synchronous interface

We are using PI 7.0 Sp 14 .
Old dev box needed to be upgrade with 64 bit hardware. We did a fresh installation and done all the technical configuraiton. Imported SLD , IR,ID , Runtime value mapping . All scenario working fine after migration except one particular scenari which involves SOAP Web service .
Our scenario is Extern system send SOAP call to PI - BPM_SYNC_ASYnc_process --> BPM Proxy_send
this BPM proxy_send to ECC R/eceiver at R/3
We are getting the following error after migraiton. Please help
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
Error! Hyperlink reference not valid. <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

Is there any other Configuration to be done at the Abap side part from BPE_XI_customising (Automatic customising) done as part of the post installation steps .
Wondering any other configuration needs to be done at the ABAP side (as BPE is running on the ABAp stack) to resolve this.
Thanks

HT1766 backup from an earlier backup not on the list? I backed up at 19.30 but do not appear to find this backup

backup from an earlier backup not on the list? I backed up at 19.30 but do not appear to find this backup

do you have a more recent backup and that's what it's saying you can restore from? it's possible that backup overwrote your previous one. in itunes on the computer go to edit > preferences > devices, and see what backups you have there

Apple TV 3 does not support the Microsoft Wedge Mobile Bluetooth Keyboard

Apple TV (3. Generation) still (17.02.2013) does not support the Microsoft Wedge Mobiloe Keyboard. I bought it especially for use with Apple TV but it doesn't work. Apple TV finds the keyboard with the exact name but can not connect. No 4 digit code appears that you can type in to your keyboard to compelete the connecting process and after a few seconds "connections fails" appears.
Now i dont't know if i should send it back to amazon to get back my money or keep it and wait until it maybe will work some day... I red from articles from beginning of january 2013 that a new Version of Apple TV is in the Pipeline (3.2) and that it has an other bluetooth chip. The same as in the iphone 5 that works with the MS wedge keyboard. So i really don't know if i should wait for the next few updates of my Apple TV or wait for a new Apple TV hardware- Update... Telephone calls with apple and microsoft doesn't brought useful results. Restore function of Apple TV doesn't work.
I hate that Apple always brew their own soup... Bluetooth is know for an easy connection to ALL devices but Apple TV supports only a hand full of keyboards. **** S**t!!!!!!!!!!!! -.-

Hi
This is the solution from Microsoft website. Work fine (don´t forget press and hold Fn key!!):
Connecting the Wedge Mobile Keyboard to a tablet PC
By default, the Bluetooth Wedge Mobile Keyboard pairs with most tablet PCs through secure simple pairing (SSP) with a passkey. Some tablets, however, may not support SSP well with a passkey.
In order to successfully pair your Wedge Mobile Keyboard to such a tablet, use the following alternative pairing mode.
Pair your keyboard through SSP without a passkey
Press and hold the Fn key at the same time as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on the top of the keyboard will blink green and red alternately. This means that your keyboard is discoverable to your tablet within 6 minutes.
On your tablet PC, from the Start menu, select Control Panel, and in Category view, locate Hardware and Sound.
Select Add a device.
When the keyboard is listed, select it, and follow the instructions to successfully pair your Wedge Keyboard with your tablet.
Note
If you want to pair your keyboard with a tablet or other computer that supports SSP with a passkey, press and hold the Connect button only.

HT3275 disk does not support the required AFP features.

i'm using seagate wireless external disk for back-up. disk does not support the required AFP features.

It's not compatible with Lion. The software/firmware needs to be updated. See #C16 in Time Machine - Troubleshooting.

InDesign CS3 ME not supported the .mrk file

Hi all,
I have the problem with InDesign CS3 ME (windows) version is not supported the .mrk file but the same to be support in Normal InDesign CS3 version.
Hint:
//pgmk.v02.00 //Prints page information inside the page area
Anyone help me this.
Regards,
Nagaraj

Has anybody got another suggestion for this please? I am experiencing the same problem.
I am Using:
Mac Pro Intel 2 x Quad 2.8Ghz
OS 10.5.8
Adobe InDesign CS3 (5.0.4)
Suitcase 11.0.5.1
The troubleshooting I have done so far:
Updated Suitcase.
Reset suitcase, deleted font caches, re-synced with server.
Updated InDesign.
Deleted and reset InDesign preference files.
Re-saved the problematic documents by selecting 'Save As.'
Finally, I copied and pasted the text and graphics into a new document which seamed to work for a few minutes but then I was back to the same problem of not being able to edit the size of the text etc

'organizer does not support the colorspace in the file' PSE 9

Does anyone know how to fix th eproblem of PSE 9 Organizer not importing a jpeg picture because 'The organizer does not support the colorspace in the file', short of a reboot?
And no the obvious 'fix the colorspace' is not the solution. This has happened to me twice in quick succession. First it was one of a batch of photos all taken at the same time, with the same camera, with the same settings. I missed checking the first of the batch when downloading them to PSE, then when I came back to this photo after downloading the rest of the batch I got the colorspace error.
The second time it happened was when I deleted a file from the catalog (but not the hard drive) and tried to import the smae file (that was previously in the catalog0 and all of a sudden the colorspace is not good enough for PSE.
Actually when this happens PSE is not prepared to recognize the colorspace of any picture file (well ok, gif, png, jpg and psd) and a reboot is required.

Please open one such file in PSE9 Editor? Does it open fine. Do a save as if it does.
Another solution could be opening this file in IrfanView which is freely downloadable. Did you happen to edit these files in between? Sometimes, file headers get corrupt due to edits and hence Organizer or Editor refuses to open them. From my observation on this forum, opening the file in IrfanView once and doing a save operation there fixes the problem most of the times.
Thanks
Andaleeb

Why when i click to open safari does it keep telling me the safari browser version i am using does not support the community toolbar ?

Why when I am clicking into safari does a message appear telling me that the Safari Browser version I am using does not support the community toolbar ???

You installed the Conduit spyware. To remove it, back up all data, then follow these instructions.
If the instructions don't work, proceed as follows.
Triple-click the line below to select it:
~/Library/Application Support/Conduit
Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
Go ▹ Go to Folder…
Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
Repeat with this line:
/Applications/Toolbars
Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
/Library
Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
Close the Finder windows you opened. Log out and log back in.
I've seen a report that Conduit may be bundled with a scam "utility" called "MacKeeper." If you installed MacKeeper, you should remove it according to the developer's instructions. It's worthless and causes many problems reported on this site.

HT3275 Time Machine gave me this message after updating to Mountion Lion "The network backup disk does not support the required AFP features."

After upgrading to Mountain lion, I got this message when it tried to backup to "MybookLive" network disk.
"The network backup disk does not support the required AFP features."
What are AFP features and why can I now not back up to my network disk?

I had a similar issue when I tried to do a network-share backup w Time machine when the share was on a Leopard OSX G5 Power PC.
I think Time Machine looks for a minimum feature set support from the afp mounted drives so they can be used with Time Machine.
Western Digital may have to update the firmware on your device to support the new afp features.
Hope this helps.

010SM: ...does not support the initial proposed set of capabilities...

          While I was testing a data extraction servlet that takes a sql statement from an HTML form document, I got the following errors in the jdbc log. I don't understand what the jdbc log entry is telling me.
          Here's my configuration:
          jdbc 20 connection with jConnect 5.2 driver
          Weblogic Server 5.1
          Perhaps you can help me.
          regards,
          Jackle
          SQLWarning: reason(010SM: This database does not support the initial proposed set of capabilities, retrying.) SQLState(010SM)
          SQLWarning: reason(010SM: This database does not support the initial proposed set of capabilities, retrying.) SQLstate(010SM) vendor code(0)
          java.sql.SQLException: JZ006: Caught IOException: java.io.IOException: JZ0EM: End of data.
          at com.sybase.jdbc2.jdbc.ErrorMessage.raiseError(ErrorMessage.java:426)
          at com.sybase.jdbc2.tds.Tds.handleIOE(Tds.java:2794)
          at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java, Compiled Code)
          at com.sybase.jdbc2.tds.Tds.logout(Tds.java, Compiled Code)
          at com.sybase.jdbc2.tds.Tds.login(Tds.java:359)
          at com.sybase.jdbc2.jdbc.SybConnection.tryLogin(SybConnection.java, Compiled Code)
          at com.sybase.jdbc2.jdbc.SybConnection.regularConnect(SybConnection.java:190)
          at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:169)
          at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:122)
          at com.sybase.jdbc2.jdbc.SybDriver.connect(SybDriver.java:175)
          at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:149)
          at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:109)
          at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.java, Compiled Code)
          at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java, Compiled Code)
          at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:330)
          at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java, Compiled Code)
          at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
          at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
          at java.lang.reflect.Method.invoke(Native Method)
          at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
          at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java, Compiled Code)
          at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
          SQLException: SQLState(JZ006)
          registerDriver: driver[className=weblogic.jdbc20.jts.Driver,weblogic.jdbc20.jts.Driver@78bf9ff2]
          registerDriver: driver[className=weblogic.jdbc20.pool.Driver,weblogic.jdbc20.pool.Driver@64b39ff2]


Reduce the complexity of the SQL statement until you do not receive the
          error. Add back the functionality until it breaks. At that point, you can
          see what feature that the driver/database does not support.
          Peace,
          Cameron Purdy
          Tangosol, Inc.
          http://www.tangosol.com
          +1.617.623.5782
          WebLogic Consulting Available
          "Jackle" <[email protected]> wrote in message
          news:[email protected]...
          >
          >
          > While I was testing a data extraction servlet that takes a sql statement
          from an HTML form document, I got the following errors in the jdbc log. I
          don't understand what the jdbc log entry is telling me.
          >
          > Here's my configuration:
          >
          > jdbc 20 connection with jConnect 5.2 driver
          > Weblogic Server 5.1
          >
          >
          > Perhaps you can help me.
          >
          > regards,
          >
          > Jackle
          >
          >
          > SQLWarning: reason(010SM: This database does not support the initial
          proposed set of capabilities, retrying.) SQLState(010SM)
          > SQLWarning: reason(010SM: This database does not support the initial
          proposed set of capabilities, retrying.) SQLstate(010SM) vendor code(0)
          > java.sql.SQLException: JZ006: Caught IOException: java.io.IOException:
          JZ0EM: End of data.
          > at com.sybase.jdbc2.jdbc.ErrorMessage.raiseError(ErrorMessage.java:426)
          > at com.sybase.jdbc2.tds.Tds.handleIOE(Tds.java:2794)
          > at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java, Compiled Code)
          > at com.sybase.jdbc2.tds.Tds.logout(Tds.java, Compiled Code)
          > at com.sybase.jdbc2.tds.Tds.login(Tds.java:359)
          > at com.sybase.jdbc2.jdbc.SybConnection.tryLogin(SybConnection.java,
          Compiled Code)
          > at
          com.sybase.jdbc2.jdbc.SybConnection.regularConnect(SybConnection.java:190)
          > at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:169)
          > at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:122)
          > at com.sybase.jdbc2.jdbc.SybDriver.connect(SybDriver.java:175)
          > at
          weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connection
          EnvFactory.java:149)
          > at
          weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connection
          EnvFactory.java:109)
          > at
          weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.j
          ava, Compiled Code)
          > at
          weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java,
          Compiled Code)
          > at
          weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:330
          > at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java,
          Compiled Code)
          > at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
          > at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
          > at java.lang.reflect.Method.invoke(Native Method)
          > at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
          > at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java, Compiled
          Code)
          > at
          weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
          > SQLException: SQLState(JZ006)
          > registerDriver:
          driver[className=weblogic.jdbc20.jts.Driver,weblogic.jdbc20.jts.Driver@78bf9
          ff2]
          > registerDriver:
          driver[className=weblogic.jdbc20.pool.Driver,weblogic.jdbc20.pool.Driver@64b
          39ff2]
          >
          >

HT1904 I bought an album back in October and have been charged the $20 but I only got two of the 16 songs. It says purchased but I can't download them.

I bought an album back in October and have been charged the $20 but I only got two of the 16 songs. It says purchased but I can't download them. How can I get them?

You might, depending upon what country that you are in, be able to download them via the Purchased tab in the iTunes store app on your phone, and the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes (or try the Store > Check For Available Downloads menu option on your computer's iTunes and see if that downloads them).
If you aren't in a country where music can be redownloaded, and you never downloaded those 14 tracks, then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

WS14000133 not supporting the Back&forth processing , back to purchaser but

Similar Messages

Maybe you are looking for