WSA Webroot Malware Category DAT files Not Updating

I have two wsa's that have not updated their webroot dat files since may 16th. I have tried a manual update and it still has not updated. I am not sure if any new updates have been released and availalbe. Is there a way I can verify what the most recent dat files are??

Did you ever resolve this issue. I have the webroot failing to update aswell. Will log a TAC case, but checking to see if you have had any progress?
Ben

Similar Messages

After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

With both my Mac's, reset Photoshop C (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.

Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
If anyone has any other ideas though, then I'm more than willing to listen.
Thanks again.

Incopy files not updating

Having a problem with Incopy files not updating after designers on Indesign prepare packages on second round of revisions.
First, the designers create an Indesign file and prepare a newly created Incopy package. The editors are able to open the package for the first time. Editors make changes then repackage for designers. Designer then open package from editors and make necessary changes and then repackage back to the editors. At this point, the editors receive a message to replace when opening package. The files open but it doesn't update all the changes that was originally made to it. It as if it is still using the original assignments from the first newly created package. Also, all the assignments have "?" in the assignment window in Incopy. We are unable to figure out how to update the "?" in Incopy or relink or what ever we need to do at this point.
Several things we checked.
1. Unstuffing the package contents from the designers shows all updated file dates. So we know the package contains the newest updated assignment files.
2. If the designers rename the file names on all the assignments in the assignment folder, then repackage. The files open on Incopy with updated changes. But not if the file name remains the same. Also, if the assignment files are all renamed, it doesn't ask to replace anything on Incopy.
At this point. Our only solution is to rename all the assignment files and repackage. But we shouldn't have to be doing this, especially since it adds time to the designers to repackage the files.
Designers using Indesign CS 3 on Mac OS 10.6.4.
Editors using Incopy CS 3 on PC Windows.
Any help would be greatly appreciated.

When the InCopy user opens the assignment package for the first time, it unpacks (it's really like a .zip file) into a folder on their hard drive called InCopy Assignments. The folder is located in My Documents on a PC and in the Home > Documents folder on a Mac.
Every unpacked InCopy assignment package goes into a subfolder within this InCopy Assignments parent folder. Each package's folder is named after the *assignment* name (not the name of the package itself, which is usually the same but not always). So if the assignment name is Chapter1.inca, then the subfolder name will be Chapter1.
When the InCopy user repackages it for the designer, it packages a *copy* of this subfolder. This is the subfolder that Bob is suggesting they delete, after sending off the packaged InDesign file. That's a good idea.
If you can't rely on your editors to do that ... many are very leery of throwing anything away ... then your designers should *rename the assignment* in their Assignments panel before creating an InCopy package for the second or third or whatever time. They can just double-click the assignment in the panel, the Assignment Options dialog box opens, and they can change the name from say "Chapter1" to "Chapter1-v2". They click okay, they choose Package for InCopy, and send it off.
When the editor gets this file and double-clicks it, it unpacks into a different subfolder than before: Chapter1-v2, leaving the Chapter1 subfolder intact. So you avoid the prob of duplicate assignments on the InCopy user's hard drive.
FWIW this was much more of a glitch with CS3. Not sure what Adobe did differently, but assignment packages are much more intelligent in CS4 and CS5.
AM

Data is not updated in the database

hi.. to all..
i'm using the following code ...... but the data is not updated in the database.. the output window get closed as soon as i clicked save button...
i don't know wat's problem with the program...
Plz help me.. to get resolve this problem..
import java.applet.*;
import java.awt.*;
import java.sql.*;
import java.awt.event.*;
import sun.jdbc.odbc.*;
public class Customerdetails extends Frame implements ActionListener
     TextField ccod,cname,add,phno,conp,email,fax;
     Label l1,l2,l3,l4,l5,l6,l7;
     Button save,exit;
     Connection con;
     ResultSet rs;
     Statement stmt;
     String s1,s2,s3,s4,s5,s6,s7;
public Customerdetails()
    super("CustomerDetails");
    setSize(700,750);
    setLayout(null);
    setBackground(new java.awt.Color(245, 117, 105));
    l1=new Label("Customercode");
    l2=new Label("CompanyName");
    l3=new Label("Address");
    l4=new Label("PhoneNumber");
    l5=new Label("Contact person");
    l6=new Label("EmailAddress");
    l7=new Label("FaxNumber");
    l1.setBounds(20,100,100,70);
    l2.setBounds(20,180,100,70);
    l3.setBounds(20,270,100,70);
    l4.setBounds(20,340,100,70);
    l5.setBounds(20,420,100,70);
    l6.setBounds(20,500,100,70);
    l7.setBounds(20,580,100,70);
    ccod=new TextField();
    cname=new TextField();
    add=new TextField();
    phno=new TextField();
    conp=new TextField();
    email=new TextField();
    fax=new TextField();
    ccod.setBounds(200,120,150,50);
    cname.setBounds(200,200,150,50);
    add.setBounds(200,280,150,50);
    phno.setBounds(200,360,150,50);
    conp.setBounds(200,440,150,50);
    email.setBounds(200,520,150,50);
    fax.setBounds(200,600,150,50);
    Button save= new Button("Save");
    Button exit= new Button("Exit");
    save.setBounds(200,680,100,40);
    exit.setBounds(350,680,100,40);
    add(l1);
    add(ccod);
    add(l2);
    add(cname);
    add(l3);
    add(add);
   add(l4);
   add(phno);
   add(l5);
   add(conp);
   add(l6);
   add(email);
   add(l7);
   add(fax);
   add(save);
   add(exit);
save.addActionListener(this);
exit.addActionListener(this);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void WindowClosing(WindowEvent w) {System.exit(0);}});
public void actionPerformed(ActionEvent ae)
Customerdetails cud= new Customerdetails();
if(ae.getSource()==save)
s1=ccod.getText();
s2=cname.getText();
s3=add.getText();
s4=phno.getText();
s5=conp.getText();
s6=email.getText();
s7=fax.getText();
try
      String query = "insert into Customerdetails (Customercode,CompanyName,Address,PhoneNumber,Contact person,EmailAddress,FaxNumber)"+ "values('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"','"+s7+"')";
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
      con=DriverManager.getConnection("jdbc:odbc:prism");
      stmt=con.createStatement();
      rs=stmt.executeQuery(query);
      stmt.close();
catch(ClassNotFoundException e)
System.out.println(e);
catch(SQLException e)
System.out.println(e);
else if(ae.getSource()==exit)
System.exit(0);
else
System.exit(0);
public static void main(String args[])
   Customerdetails cud= new Customerdetails();
}

This doesn't look right:
,FaxNumber)"+ "values(because it's equal to ,FaxNumber)values(and your SQL server won't understand it, put a whitespace between.
/M

Data is not updating in DB Table

Hi...All
we have done the RFC-JDBC Synchronous scenario, we are getting the success messages into SXMB_MONI ,in the CCM also it was showing success. but data is not updating in to the Database Table. client want to see the response data in the Database Table only.
pls help me this is very urgent.
Regards,
Pasi.

Hi,
If everything is working fine in XI there is some problem in database end only while query gets executed. Try debuging the sql query which you have by giving log statement and see what the query generated is.
Got to your receiver jdbc communication chalnnel , Advance mode > Additional parameters,
Enter logSQLStatement in the name column and true in the value column
To view the SQL log Click on the message ID of the communication channel monitoring.
or, alternatively, in Runtime workbench, click your message> details> audit log tab.
Run the interface once more. Check the communication channel now. It will show the actual insert statement which is trying to insert into the DB and then you can figure out what is the query being fired to database and see if it is fine.
Copy the same query and run in databse. you will be able to find the exact problem.
thanks
amit
reward point if answer is useful

When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.

Hi,
When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.
Active directory attribute co have value vietnam but in FIM Portal country attribute have value VIET NAM
we simply mapped AD Attribite to FIM Attribute for inbound
co===>country
why this happen
Regards
Anil Kumar

Anil, please check what do you have in metaverse. It seems that you have attribute flow precedence configured in a way that doesn't export to FIM Portal.
Let's say you have flows like:
(AD MA)
Import flow: (AD) description -> (metaverse) description
(FIM MA)
Import flow (FIM) description -> (metaverse) description
Export flow (FIM) description <- (metaverse) description
And you have higher precedence from FIM. Then, you would never have FIM value updated - even if value in AD changes. It would be exported to FIM only when you don't have this attribute filled in FIM.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Deactivation date is not updating in Asset Master after retirement (ABAON)

Dear Experts,
Asset Capitalized on: 28.02.2009 and depreciation key used as: LINK-Str.-line from acq.value to zero without interest. Asset Retirement done with revenue (210) on 31.05.2009. We do have depreciation like (01 book depreciation, 15 Tax depreciation, 30 Local GAAP book depreciation). Below is the asset and class:
Asset name: Maruti Baleno
Asset Class: Vehicles
Here my question is after retirement done with the transaction code: ABAON u201CDeactivation onu201D date is not updating automatically in the system, however when am trying to update manually the system showing error like u201CDeactivation not possible. Dep.area 15 has acquisition values.
When am trying to do same transaction with T code: u201CABAVNu201D, the system updating the deactivation date.
Can anybody explain me why the above error happening and why the deactivation date is not updating with t code: ABAON.
Thanks,
Francis.J

Dear Atif Farooq,
In the AO74 the transaction types (Deactivate fixed asset check box also ticked)
200 Retirement without revenue
210 Retirement with revenue
When am trying to update manually below error appearing in AS02
Deactivation not possible. Dep.area 15 has acquisition values
Message no. AA296
Diagnosis
You cannot deactivate, since acquisition values are still present in depreciation area 15.
Procedure
Deactivation can only be posted by a complete retirement/transfer. The deactivation date is then set automatically.
The above asset procured in the year of 2009 and same has been retired 2009.
Thanks,
Francis J

Last stock update Date Tab not updating in ICH

Hi Team
I observed that in ICH screen Last stock update Tab is not going to update every time while demand and stock information coming from ECC to ICH.
There is no stock inconsistency. All stock tab information are updating correctly in ICH compare to ECC system.
Only this Last stock update tab Date are not updating.
What is the reason behind this?
Could you please help me to resolve this?
Regards
Virendra Kumar
09769396038

Hi Virendra
It is a bug, please report to SAP and get fix
which version you are using and what is the patch level?
1341691 should be helpful check out
Best Regards
Vinod

Time/date will not update

After updating software, the time/date will not update. My network is fine and I can get to the internet fine. Also will not accept my apple ID

Try restarting the Apple TV by removing ALL the cables for 30 seconds.

System status NTUP (Dates are not updated)

Hi Guys,
WBS Element has the system status NTUP (Dates are not updated) the option to untick this is greyed out and it is preventing the posting of a journal.
Could you please let me know how to remove this system status.
Regards,
Abdul Rehman

Hi Amit,
Thanks for your reply,
WBS is released and there is no user status as well but besides NTUP another system status is there i.e ACPT(Order accepted) is this is causing any problem for genral postings?
Could you please also let me know how status NTUP got activated when i am checking in the change log it is not showing any name.
WBS is very much an account assignment element.
Regards,
Abdul Rehman.

Statistical delivery date is not updating automatically or by default

When creating the PO delivery date of a item in PO,is picking,but statistical delivery date is not updating automatically or by default. I am not getting this automatically .Its need for vendor evaluation.

Hi,
Check on it:-
Statistical Delivery date vs Confirmed Delivery date
pherasath

Has anybody noticed that Last played dates do not update?

I have recently noticed that the playcounts and last played dates are not updating. When you play a song it does not update the last played date.
Did anyone come across with this issue

Yep, same for me. When i play on my iPhone, it doesn't update in iTunes using iTunes Match.

Control file not updated till date in RAC two node database

Hi,
Good day.
To my surprise i found that control files, in our database RAC with two nodes, are not updated till date except one from node 1 and another from node 2.
But we got all the controlfile names in the init parameter file, in both the nodes.
Node 1
bash-3.00$ ls -lrt
total 922128
-rw------- 1 oracle dba 157286400 Nov 3 2007 cntrl03.dbf
-rw------- 1 oracle dba 157286400 Nov 3 2007 cntrl02.dbf
-rw------- 1 oracle dba 157286400 Apr 12 17:21 cntrl01.dbf
Node 2
bash-3.00$ ls -lrt
total 922128
-rw------- 1 oracle dba 157286400 Mar 30 09:17 cntrl03.dbf
-rw------- 1 oracle dba 157286400 Mar 30 09:17 cntrl02.dbf
-rw------- 1 oracle dba 157286400 Apr 12 17:20 cntrl01.dbf
As you could see cntrl01.dbf is the only file updated till date in both the nodes. The database is running fine.
what is actually happening?
Any suggestions?
Thanks,
Balu.

As you're using RAC it is very likely that you are using an SPFILE.
Connect as a DBA account (or an account with SELECT ANY DICTIONARY privileges) in both the instances and do "show parameter spfile" and "show parameter control" (or query V$parameter)
It is likely that the spfile is referencing only 1 controlfile.

Data is not updating in calss & Convert vi reference to strictly type reference vi

Hi,
In the attached project file there is a Class called 'ClassSample.lvclass' having 3 different data types Boolean, Numeric and Variant(not really sure, Variant can be use for strict data type reference). From this three we careated the 'VIs for data member access' you can see them in project file
My questions are,(Please refer attached screenshot)
1. Though member of same class, why value is not updating at probe 16 ?
2. How to convert vi reference to strictly type reference vi ?
Thank you.
Attachments:
Capture.JPG ‏426 KB
ClassSample Project.zip ‏116 KB

It depends a bit on your final intention. Bascially you have a shared state that you want to access asynchronously from different places. If you know that the actual object is only created once (terminilogie here is a bit shaky as every wire split would create a copy of the LVOOP object but I hope you know what I mean), you could use a global or Action Engine to store the state. Using a DVR for this state and adding the DVR to your object class data is however a more scalable approach as it will allow you to instantiate more than one object of that class and each one will contain its own DVR that will reference the same value for the specific object instance even if you split the object wire, creating actually two copies of that object (but for the purpose of this discussion they would be still the same object instance).
Queues could work if you create a single element queue but you would always need to use Preview Queue rather than Dequeue in order to maintain the value in there.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Data is not updating in data target from PSA

Hi,
i have loaded data from flat file to an Info Object(with direct update)....the data is loaded correctly into PSA...when i manually read data from PSA to data target its not updting in data target.......can anyone help with this....thanks in advance..

hi bwusr,
direct update, so it's master data,
is it attribute or text ? perhaps there's invalid character or lower case,
check in monitor tab detail.
and when you said not updated to data target,
you check by right click 'maintain master data' ?
or you mean it's not updated to reporting ?
execute change run ? rsa1->tools->apply attribute/hierarchy change.
hope this helps.

WSA Webroot Malware Category DAT files Not Updating

Similar Messages

Maybe you are looking for