Wsaewouldblock resource temporarily unavailable,pls help me to resolve it

When i logon to sapgui it shows error "wsaewouldblock resource temporarily unavailable" for a particular landscape but otherthan that i can logon perfectly.i m getting this error since last friday and before tat it was fine
i tried to logon through run->sapgui "Applicaation Server" "sys no" but it also shows error.....

how to check SAP ports on n/w
On Windows
netstat -ano ---> will list all ports in use
netstat -ano | findstr 3600 --> will show if port 3600 is in use.
On Unix
lsof -i | grep 3600 --> will show if port 3600 is in use.
Hope that helps.

Similar Messages

WSAEWOULDBLOCK: Resource temporarily unavailable

Hi All,
Please help me on resolving the SAP log in issue.
I am able to ping the IP from CMD and not able to log in to SAP.. While log in I get the below error message.
WSAEWOULDBLOCK: Resource temporarily unavailable
The server is up and running and some of my collegues at onsite are able to log in to the system but am not able .. please help.
Thanks
Manju

Hi,
Thanks for the responce. when I do telnet <ip> <port> it says "Could not open the connetion to the host on port.
Please let me know how to check whether the port is opened or not and whether it should be done on the BI server or on the remote machine.
Thanks lot for your responce.
thanks
Manju

WSAEWOULDBLOCK - Resources temporarily unavailable

Hi,
I am trying to open one of our IDES server via SAP GUI. I am getting the following error as ' Partner 192.168.0.0 Sapdb00 not reached' WSAEWOULDBLOCK - Resources temporarily unavailable'.
When I try to login via SAPGUI directly from the server where IDES is running, it works fine. But when i try from other machines it throws the above errors. I checked up the services and hosts file entry. It has the following entries
sapdp00 3200/tcp till 3399 is mentioned.
Please help to resove this issue.
regards,
raj

Hi Raj,
Please check that from your end port 3200, 3300, 3600 are open or not, where 00 is your instanace number.
you can check the same via doing telnet from end user desktop i.e..
telnet (ip address of server) 3200 where 3200 is port number metioned.
Cheers
Deepanshu

GUI problem :10035 wsaewouldblock : resource temporarily unavailable

Hi..I am using SAP GUI 7.10. I m connecting thru remote..where my server is located at some other place.. I gave that System IP. And the following error I am getting that "
WSAEWOULDBLOCK : RESOURCE TEMPORARILY UNAVAILABLE". how to resolve this. I am able to ping that IP address.
Thanks

Hi!
Is there any firewalls blocking the connection? Have you tried telnet to host on port 32xx, where xx is system number? If telnet does not work, then your firewalls are blocking the connection.

Mac OS 10.7 Server won't mount DMG's after opening and closing - "Resource Temporarily Unavailable"

I am running Mac OS 10.7.3 Server on Mac Pro 2 x 2.66 GHz 6-Core Intel Xeon with multiple users editing on Avid.
DMG's containing raw camera footage are stored on the server, mounted by connected users on their desktops to allow Avid to access the enclosed data within the DMG's. Recently we've started encountering a problem opening the DMG's after they've recently been opened and closed. After opening and closing a DMG. when we try to open it again from the same user/connected computer or any other user/computer we see an error message saying "The following disk images couldn't be opened" NAME OF DMG "Resource temporarily unavailable". This happened to several users with several DMG's.
We have since restarted the server, which appeared to fix the problem for about a week and now we are having the same issue again.
The only changes made recently have been an update to version 4.2 of our ISIS 5000 which all of the Avid systems edit off of, but I don't beleive that to be the cause of the DMG opening issue. I suspect it might be caused by the Pram still thinking that the DMG's are open when they've already been closed.
Not sure if this is relevant, but we had been running only Mac OS 10.7 systems connected to the server but within the last few months we've been adding several more systems including those with OS 10.8.
Has anyone else encountered this issue? Does anyone know the fix to this problem?
Thanks for any and all help!

Also, we have been able to copy the DMGs to desktops and external drives, which normally would not be possible when a DMG is currently open by another user which is the standard situation in which a DMG would say "Resource Temporarily Unavailable".
After copying to another location, they open normally so we believe it is an issue isolated to the server itself.
Thanks!

Mprotect failed: Resource temporarily unavailable error while starting JVM

Hi All,
I am using JDK 1.6.0_21 in sunos on sparc server.
JDK_
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b07)
Java HotSpot(TM) Server VM (build 17.0-b17, mixed mode)
OS and Hardware config_
SunOS 5.10 Generic_142900-11 sun4u sparc SUNW,SPARC-Enterprise.
while starting the JVM getting the mprotect error as shown below:
*# V [libjvm.so+0x16af10] int frame::interpreter_frame_bci()const+0x14*
*# An error report file with more information is saved as:*
*# /progs/spider/runtime/testtool/hs_err_pid11769.log*
*# If you would like to submit a bug report, please visit:*
*# http://java.sun.com/webapps/bugreport/crash.jsp*
*11769 Abort - core dumped*
dl failure on line 685Error: failed /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so, because ld.so.1: java: fatal: /usr/jdk/instanes/jdk1.6.0/jre/lib/sparc/server/libjvm.so: mprotect failed: Resource temporarily unavailable
Complete error written to */progs/spider/runtime/testtool/hs_err_pid11769.log*.
*# A fatal error has been detected by the Java Runtime Environment:*
*# SIGSEGV (0xb) at pc=0xfe56af10, pid=11769, tid=5*
*# JRE version: 6.0_35-b10*
*# Java VM: Java HotSpot(TM) Server VM (20.10-b01 mixed mode solaris-sparc )*
*# Problematic frame:*
*# V [libjvm.so+0x16af10] int frame::interpreter_frame_bci()const+0x14*
*# If you would like to submit a bug report, please visit:*
*# http://java.sun.com/webapps/bugreport/crash.jsp*
--------------- T H R E A D ---------------
*Current thread (0x000e1400): VMThread [stack: 0xd7500000,0xd7580000] [id=5]*
siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0xf24ff724
Registers:
G1=0x000504b8 G2=0xfc004fc0 G3=0xfc00d6ac G4=0xfc031fc0
G5=0x0002d000 G6=0x00000000 G7=0xfe3c1a00 Y=0x00000000
O0=0xd757f5f0 O1=0xf24ff720 O2=0xfee237bc O3=0x0000ffff
O4=0x0000fc00 O5=0xfc004f88 O6=0xd757f4b8 O7=0xfe8b978c
L0=0x00041400 L1=0xfee375e8 L2=0x04000000 L3=0x00041400
L4=0x000415f0 L5=0x00041400 L6=0x000415e8 L7=0x01000000
I0=0xd757f5f0 I1=0xfee2fa94 I2=0xfedf6000 I3=0x00039a94
I4=0x0053c690 I5=0xf24ff720 I6=0xd757f518 I7=0xfe5d6b58
PC=0xfe56af10 nPC=0xfe56af14
Top of Stack: (sp=0xd757f4b8)
*0xd757f4b8: 00041400 fee375e8 04000000 00041400*
*0xd757f4c8: 000415f0 00041400 000415e8 01000000*
*0xd757f4d8: d757f5f0 fee2fa94 fedf6000 00039a94*
*0xd757f4e8: 0053c690 f24ff720 d757f518 fe5d6b58*
*0xd757f4f8: 00000000 00000000 f1b78050 00000003*
*0xd757f508: 000d0374 fffffffd 00000000 000ad1f8*
*0xd757f518: 00000000 fc004f88 fc00d6ac f24ff720*
*0xd757f528: 00000000 00704518 00000003 d757f830*
Instructions: (pc=0xfe56af10)
*0xfe56aef0: e6 26 24 50 81 c7 e0 08 81 e8 20 00 9d e3 bf a0*
*0xfe56af00: fa 06 20 00 19 00 00 3f 90 10 00 18 96 03 23 ff*
*0xfe56af10: f2 07 60 04 9f 3e 60 00 94 22 c0 0f b9 33 f0 3f*
*0xfe56af20: b7 32 b0 3f b0 1f 20 01 b4 1e e0 01 ae 0e 00 1a*
Register to memory mapping:
G1=0x000504b8 is an unknown value
G2=0xfc004fc0 is pointing into interpreter code (not bytecode specific)
G3=0xfc00d6ac is an Interpreter codelet
method entry point (kind = native) [0xfc00d560, 0xfc00d8e0] 896 bytes
G4=0xfc031fc0 is an unknown value
G5=0x0002d000 is an unknown value
G6=0x00000000 is an unknown value
G7=0xfe3c1a00 is an unknown value
O0=0xd757f5f0 is an unknown value
O1=0xf24ff720 is an unallocated location in the heap
O2=0xfee237bc: +0x2cc3c in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
O3=0x0000ffff is an unknown value
O4=0x0000fc00 is an unknown value
*O5=0xfc004f88 [CodeBlob (0xfc004f88)]*
Framesize: 0
BufferBlob (0xfc004f88) used for Interpreter
O6=0xd757f4b8 is an unknown value
O7=0xfe8b978c: AsyncGetCallTrace+0x96fc in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
L0=0x00041400 is an unknown value
L1=0xfee375e8: +0x40a68 in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
L2=0x04000000 is an unknown value
L3=0x00041400 is an unknown value
L4=0x000415f0 is an unknown value
L5=0x00041400 is an unknown value
L6=0x000415e8 is an unknown value
L7=0x01000000 is an unknown value
I0=0xd757f5f0 is an unknown value
I1=0xfee2fa94: +0x38f14 in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
*I2=0xfedf6000: GLOBALOFFSET_TABLE_+0 in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000*
I3=0x00039a94 is an unknown value
I4=0x0053c690 is an unknown value
I5=0xf24ff720 is an unallocated location in the heap
I6=0xd757f518 is an unknown value
I7=0xfe5d6b58: JVM_GetClassLoader+0x3ec0 in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
Stack: [0xd7500000,0xd7580000], sp=0xd757f4b8, free space=509k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
*V [libjvm.so+0x16af10] int frame::interpreter_frame_bci()const+0x14*
*V [libjvm.so+0x1d6b60] void frame::gc_prologue()+0x20*
*V [libjvm.so+0x2241e4] void Threads::gc_prologue()+0xd0*
*V [libjvm.so+0x7c62c8] void PSMarkSweep::invoke_no_policy(bool)+0x52c*
*V [libjvm.so+0x7c5d78] void PSMarkSweep::invoke(bool)+0x8c*
*V [libjvm.so+0x225264] void VM_ParallelGCSystemGC::doit()+0xc4*
*V [libjvm.so+0x1f0018] void VM_Operation::evaluate()+0x88*
*V [libjvm.so+0x8ce23c] void VMThread::evaluate_operation(VM_Operation*)+0xd4*
*V [libjvm.so+0x8ce784] void VMThread::loop()+0x414*
*V [libjvm.so+0x267010] void VMThread::run()+0xa0*
*V [libjvm.so+0x791a18] java_start+0x158*
VM_Operation (0xf24ff5b0):
*[error occurred during error reporting (printing VM operation), id 0xb]*
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
*0x00704400 JavaThread "GC Daemon" daemon [_thread_blocked, id=20, stack(0xf2480000,0xf2500000)]*
*0x00716400 JavaThread "RMI Reaper" [_thread_blocked, id=19, stack(0xf2580000,0xf2600000)]*
*0x0070fc00 JavaThread "RMI TCP Accept-0" daemon [_thread_in_native, id=18, stack(0xf2680000,0xf2700000)]*
*0x00100800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=11, stack(0xd6f00000,0xd6f80000)]*
*0x000fe000 JavaThread "C2 CompilerThread1" daemon [_thread_blocked, id=10, stack(0xd7000000,0xd7080000)]*
*0x000fb800 JavaThread "C2 CompilerThread0" daemon [_thread_blocked, id=9, stack(0xd7100000,0xd7180000)]*
*0x000fa000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=8, stack(0xd7200000,0xd7280000)]*
*0x000e6c00 JavaThread "Finalizer" daemon [_thread_blocked, id=7, stack(0xd7300000,0xd7380000)]*
*0x000e5400 JavaThread "Reference Handler" daemon [_thread_blocked, id=6, stack(0xd7400000,0xd7480000)]*
*0x00032000 JavaThread "main" [_thread_blocked, id=2, stack(0xfe300000,0xfe380000)]*
Other Threads:
*=>0x000e1400 VMThread [stack: 0xd7500000,0xd7580000] [id=5]*
*0x00113400 WatcherThread [stack: 0xd6e00000,0xd6e80000] [id=12]*
VM state:at safepoint (normal execution)
*VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])*
*[0x00031330] Threads_lock - owner thread: 0x000e1400*
*[0x00031740] Heap_lock - owner thread: 0x00704400*
Heap
PSYoungGen      total 10752K, used 1008K [0xf1000000, 0xf1c00000, 0xfbc00000)
eden space 9216K, 0% used [0xf1000000,0xf1000000,0xf1900000)
from space 1536K, 65% used [0xf1a80000,0xf1b7c050,0xf1c00000)
to   space 1536K, 0% used [0xf1900000,0xf1900000,0xf1a80000)
PSOldGen        total 24576K, used 0K [0xdb800000, 0xdd000000, 0xf1000000)
object space 24576K, 0% used [0xdb800000,0xdb800000,0xdd000000)
PSPermGen       total 16384K, used 7578K [0xd7800000, 0xd8800000, 0xdb800000)
object space 16384K, 46% used [0xd7800000,0xd7f669c8,0xd8800000)
Code Cache [0xfc000000, 0xfc400000, 0xfe000000)
total_blobs=188 nmethods=49 adapters=95 free_code_cache=33095232 largest_free_block=26368
Dynamic libraries:
*0x00010000 /usr/jdk/instances/jdk1.6.0/jre/bin/java*
*0xff3a0000 /usr/lib/lwp/libthread.so.1*
*0xff370000 /usr/jdk/instances/jdk1.6.0/jre/bin/../lib/sparc/jli/libjli.so*
*0xff350000 /lib/libdl.so.1*
*0xff200000 /lib/libc.so.1*
*0xff390000 /platform/SUNW,SPARC-Enterprise/lib/libc_psr.so.1*
*0xfe400000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so*
*0xff1d0000 /lib/libsocket.so.1*
*0xff1f0000 /usr/lib/libsched.so.1*
*0xff1b0000 /lib/libm.so.1*
*0xff180000 /usr/lib/libCrun.so.1*
*0xff160000 /lib/libdoor.so.1*
*0xff120000 /usr/lib/libdemangle.so.1*
*0xff100000 /lib/libkstat.so.1*
*0xff000000 /lib/libnsl.so.1*
*0xfef00000 /lib/libm.so.2*
*0xff0c0000 /lib/libscf.so.1*
*0xfefe0000 /lib/libuutil.so.1*
*0xfeee0000 /lib/libgen.so.1*
*0xfeeb0000 /lib/libmd.so.1*
*0xfee90000 /lib/libmp.so.2*
*0xfe390000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libverify.so*
*0xfe2c0000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libjava.so*
*0xfe280000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libzip.so*
*0xfe260000 /usr/lib/locale/no_NO.ISO8859-1@bokmal/[email protected]*
*0xfbfc0000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvj.so*
*0xfbe60000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvcmq.so*
*0xfbe30000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvcm.so*
*0xfbe10000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvft.so*
*0xd6d80000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrv.so*
*0xfbfe0000 /lib/libpthread.so.1*
*0xfbd40000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libmanagement.so*
*0xfbd10000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libj2pkcs11.so*
*0xfbc40000 /usr/lib/libpkcs11.so*
*0xfbc20000 /usr/lib/libcryptoutil.so.1*
*0xf27a0000 /usr/lib/security/pkcs11_softtoken.so*
*0xf2770000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libnet.so*
VM Arguments:
jvm_args: -Dlog.dir=/data/flowlogs/testtool -Djava.rmi.server.codebase=file:///progs/spider/flow_home/Output/java/classes/ -Djava.security.policy=/progs/spider/flow_home/config/flow2/props/java.policy -Dproperty_file=testtool.properties -Dtestdata=/progs/spider/flow_home/test/framework/testtool
java_command: flow.framework.componentserver.Server
Launcher Type: SUN_STANDARD
Environment Variables:
JAVA_HOME=/usr/jdk/jdk1.6.0_35
PATH=/progs/spider/flow_home/bin:/progs/spider/flow_home/ant/bin:/usr/jdk/jdk1.6.0_35/bin:/usr/jdk/jdk1.6.0_35/jre/bin:/usr/bin:/usr/local/bin:/progs/spider/TIBCO/tibrv/8.3/bin:/progs/spider/TIBCO/inconcert/server/ICFLOWNEWUTV/bin
LD_LIBRARY_PATH=/usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server:/usr/jdk/instances/jdk1.6.0/jre/lib/sparc:/usr/jdk/instances/jdk1.6.0/jre/../lib/sparc::/usr/lib/lwp:/progs/spider/TIBCO/inconcert/icapps/shared/native/lib:/progs/spider/TIBCO/tibrv/8.3/lib:/progs/spider/flow_home/lib/tibco:/progs/spider/TIBCO/inconcert/icapps/icjava/lib:/progs/spider/TIBCO/inconcert/server/ICFLOWNEWUTV/lib:/progs/spider/TIBCO/tibrv/8.3/lib
SHELL=/bin/bash
Signal Handlers:
*SIGSEGV: [libjvm.so+0x8ca71c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
*SIGBUS: [libjvm.so+0x8ca71c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
*SIGFPE: [libjvm.so+0x1d0f7c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
SIGPIPE: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
*SIGXFSZ: [libjvm.so+0x1d0f7c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
*SIGILL: [libjvm.so+0x1d0f7c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGUSR2: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
*SIGQUIT: [libjvm.so+0x794044], sa_mask[0]=0xffbffeff, sa_flags=0x00000004*
*SIGHUP: [libjvm.so+0x794044], sa_mask[0]=0xffbffeff, sa_flags=0x00000004*
SIGINT: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
*SIGTERM: [libjvm.so+0x794044], sa_mask[0]=0xffbffeff, sa_flags=0x00000004*
*SIG39: [libjvm.so+0x7976b8], sa_mask[0]=0x00000000, sa_flags=0x00000008*
*SIG40: [libjvm.so+0x1d0f7c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
--------------- S Y S T E M ---------------
OS:                      Solaris 10 10/09 s10s_u8wos_08a SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 September 2009
uname:SunOS 5.10 Generic_142900-11 sun4u (T2 libthread)
rlimit: STACK 8192k, CORE 0k, NOFILE 65536, AS infinity
load average:0,82 0,83 0,60
CPU:total 2 has_v8, has_v9, popc, has_vis1, has_vis2, is_ultra3, is_sparc64
Memory: 8k page, physical 2097152k(0k free)
vm_info: Java HotSpot(TM) Server VM (20.10-b01) for solaris-sparc JRE (1.6.0_35-b10), built on Aug 28 2012 15:42:48 by "" with Workshop 5.8
time: Thu Jun 6 07:45:16 2013
elapsed time: 6 seconds
Can any one help me what is happening.
Regards,
Satya Krishna Y
Edited by: 1010262 on 06.jun.2013 07:55
Edited by: 1010262 on 06.jun.2013 07:56

> *# SIGSEGV
Common cause is JNI
> /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvj.so
Looks like a non-standard library so it suggests JNI is in use

Terminal - login: fork: Resource temporarily unavailable.

I use Terminal to log in remotely to some off-site unix servers. Previously, I could open several terminal shells at once, but lately if I try to open more than one, I get this message: <login: fork: Resource temporarily unavailable>. Any ideas how to fix this? There was a suggestion here: http://ruminate.net/pdm/mt/osx_tips/os_x_tiger_104_process_limitssolution.html but I'm not sure how to implement it. Thanks for any help.
iMac (G5) Mac OS X (10.4.5)

Dafydd,
you should first edit /etc/launchd.conf and then add the line "limit maxproc 512 2048" inside the file.
From the terminal: sudo vi /etc/launchd.conf
add the line, save the file and exit vi (or any other editor).
To make sure that the changes are working, run "launchctl limit" before and after editing the file.
Mihalis.
Dual G5 @ 2GHz Mac OS X (10.4.5)

Login: fork: Resource temporarily unavailable - how can i fix this?

I use Terminal to log in remotely to some off-site unix servers. Previously, I could open several terminal shells at once, but lately if I try to open more than one, I get this message: <login: fork: Resource temporarily unavailable>. Any ideas how to fix this? There was a suggestion here: http://ruminate.net/pdm/mt/osx_tips/os_x_tiger_104_process_limitssolution.html but I'm not sure how to implement it. Thanks for any help.
iMac (G5) Mac OS X (10.4.5)

I'm glad it's working for you, but am not convinced that the firewall was the problem.
The error message you got means that the server didn't have enough resources to process your login. This could be insufficient RAM, disk space or, more likely process space. If the server is very busy and has lots of processes running it can't fork a new process for your login.
Problems like that are usually transient - trying again a few minutes later may work since some processes have finished and have freed up process space.
You should look at what's running on the server and take whatever steps you think appropriate to reduce the number of processes running.

Apachectl: fork: Resource temporarily unavailable

I'm in the process of upgrading to 10.1.3.5, while manually starting OPMN i'm getting the below error message..
initial isssue with patching is "opmn is failing to start. opmn must be started.....:"
/u01/VIS/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl: fork: retry: Resource temporarily unavailable
/u01/VIS/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl: fork: retry: Resource temporarily unavailable
/u01/VIS/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl: fork: retry: Resource temporarily unavailable
/u01/VIS/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl: fork: retry: Resource temporarily unavailable
/u01/VIS/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl: fork: Resource temporarily unavailable
my limits.conf has the below settings, not sure where it is checking for this parameter value.
* hard nofile 65536
* soft nofile 4096
* hard nproc 16384
* soft nproc 2047
Note:
1. I've not yet run the autoconfig after database upgrade, I'm planning to execute that after 10.1.3.5 with few more pre-req patching.
2. Both database and application tier are under the same user name "oracle".
ps -eLf|grep oracle|egrep -v root|wc -l
50
Any suggestions would be of great help.
Regards,
Raj.

Please post the details of the application release, database version and OS.
I'm in the process of upgrading to 10.1.3.5, while manually starting OPMN i'm getting the below error message..Why do you have to start OPMN in the middle of the upgrade?
initial isssue with patching is "opmn is failing to start. opmn must be started.....:"
/u01/VIS/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl: fork: retry: Resource temporarily unavailable
/u01/VIS/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl: fork: retry: Resource temporarily unavailable
/u01/VIS/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl: fork: retry: Resource temporarily unavailable
/u01/VIS/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl: fork: retry: Resource temporarily unavailable
/u01/VIS/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl: fork: Resource temporarily unavailableAre you starting the services using "adopmnctl.sh startall" command?
Please see (Resource Temporarily Unavailable: Fork: Unable To Fork New Process [ID 1512253.1]).
my limits.conf has the below settings, not sure where it is checking for this parameter value.
* hard nofile 65536
* soft nofile 4096
* hard nproc 16384
* soft nproc 2047Assuming you are on 12.1.x and Linux OS, please see the settings in these docs.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Note:
1. I've not yet run the autoconfig after database upgrade, I'm planning to execute that after 10.1.3.5 with few more pre-req patching.
2. Both database and application tier are under the same user name "oracle".Why not complete the upgrade, run AutoConfig then start the services?
Thanks,
Hussein

IOException Resource temporarily unavailable

I have a program that opens a socket and listens for udp packets. The code snippet code goes like this
while( true )
byte[] buf = new byte[ 2048 ];
DatagramPacket p = new DatagramPacket( buf, buf.length );
try { socket.receive( p ); }
catch( IOException exc )
log("Socket read error: " + exc.getMessage());
break;
//... do something with p
My program works fine until I get this "Resource temporarily unavailable" exception. (I dont use nio classes) Iam on linux 8.0 with JRE1.5..
When does this exception occur ? Is there any workaround ? It looks like this would be thrown when no data is available on the socket (but I dont get this in Windows) Any help would be greatly appreciated.

First off, what do you mean you use linux 8.0? What distribution is that?
Is the exception that is being thrown an IOException? I just want to make sure the problem is actually happening at the socket.receive(p) line.
You can also try to print the stack trace of the exception by doing this: exec.printStackTrace()
That might tell you what class is throwing the exception which will give a clue as to what resource it needs to allocate but cannot.
Nick

EDC5112I Resource temporarily unavailable.; _errno= X'00000070' (112) error

Our application is a simple JRIO code which writes into a VSAM file. The jar which does this job is also housed under the Mainframe. For the past few months we are getting the below exception
EDC5112I Resource temporarily unavailable.; errno= X'00000070' (112), errno2= X'00000000' (0)
     at com.ibm.recordio.os390nonvsam.NativeException.throwIoExWithUntranslatedMessage(NativeException.java(Compiled Code))
     at com.ibm.recordio.os390nonvsam.NativeException.rethrow(NativeException.java(Compiled Code))
     at com.ibm.recordio.os390nonvsam.FileOutputRecordStream.flush(FileOutputRecordStream.java(Compiled Code))
     at com.aviva.nui.transformer.FixedFileFormatter.writefile(FixedFileFormatter.java(Compiled Code))
     at com.aviva.nui.transformer.FixedFileFormatter.generateFixLengthIndexFeedFile(FixedFileFormatter.java(Compiled Code))
     at com.aviva.nui.transformer.AFEndPoint.execute(AFEndPoint.java(Compiled Code))
     at com.aviva.nui.af.bridging.EndpointCallerJava.callIn(Unknown Source)
     at com.aviva.nui.af.RequestContext.callEndpoint(Unknown Source)
     at com.aviva.nui.af.AFMain.callIn(Unknown Source)
I have found from an IBM forum the below description
The forum had the decription as :
External Symptoms:
msgedc5112i error may be raised when using jrio .
Systems with High Processing or Low CP Processing
Resource Availability.
When using JRIO you may encounter:
Loader:main:IOException:EDC5112I
Resource temporarily unavailable.;
errno= X'00000070' (112), _errno2= X'0594003D' (93585469)
I am not really sure what the two errnos say and what difference does it make if they are different.
The solution that was given for above issue was : update recordio.jar and libJrioOS390.so
Can some one please help me with the above error.The problem is this error does not occur always. It happens occasionaly only. Say 3 or 4 times a month.
Many thanks in advance
chilloutnhell

Just noticed that this is still open... a reboot did it
However maybe someone has an idea how this happened and how to prevent similar situations in the future, if possible ?

Solaris 10 - Oracle RAC - "Resource temporarily unavailable"

SunOS 5.10 Generic_127111-06 sun4u sparc SUNW,Sun-Fire-15000
While running the DTraceToolkit script "errinfo" on one of our database instances (both sides of RAC cluster) we notice a lot of "Resource temporarily unavailable" errors. We currently have no noticeable performance issues, but would just like to know what these errors mean and if they are indicative of potential issues.
Tracing... Hit Ctrl-C to end.
^C
            EXEC          SYSCALL ERR COUNT DESC
            date            ioctl   22      1 Invalid argument
             fmd         lwp_park   62      1 timer expired
           inetd         lwp_park   62      1 timer expired
          oracle            ioctl   12      1 Not enough core
          prstat             open    2      1 No such file or directory
           snmpd            ioctl   12      1 Not enough core
            nscd            fcntl   22      2 Invalid argument
            nscd         lwp_kill    3      2 No such process
            nscd         lwp_park   62      2 timer expired
           poold         lwp_kill    3      2 No such process
              sh            ioctl   25      2 Inappropriate ioctl for device
              sh           stat64    2      2 No such file or directory
     svc.configd         lwp_park   62      2 timer expired
      svc.startd         lwp_park   62      2 timer expired
              bb             stat    2      6 No such file or directory
           clear            close    9      9 Bad file number
           clear            ioctl   25      9 Inappropriate ioctl for device
          oracle            lstat    2      9 No such file or directory
             sed            close    9     12 Bad file number
             sed            ioctl   22     12 Invalid argument
             sed             read    9     12 Bad file number
              sh           llseek   29     13 Illegal seek
           xntpd       sigsuspend    4     26 interrupted system call
           poold    lwp_cond_wait   62     27 timer expired
              sh            ioctl   22     30 Invalid argument
          oracle            ioctl    6     31 No such device or address
          oracle             open    2     31 No such file or directory
          oracle          setpgrp    1     31 Not super-user
         tnslsnr      getpeername 134     31 Socket is not connected
         tnslsnr          setpgrp    1     31 Not super-user
          oracle           semsys   11     34 Resource temporarily unavailable
            init          pollsys    4     35 interrupted system call
              sh          waitsys   10     51 No children
            java    lwp_cond_wait   62     52 timer expired
         tnslsnr           access    2     62 No such file or directory
            init            ioctl   25     70 Inappropriate ioctl for device
       in.mpathd          pollsys    4     74 interrupted system call
          oracle            mkdir   17     76 File exists
          oracle             read    4     89 interrupted system call
          oracle           shmsys    2     93 No such file or directory
          oracle            ioctl   25    133 Inappropriate ioctl for device
          oracle           access    2    217 No such file or directory
          oracle          pollsys    4    401 interrupted system call
          oracle             stat    2 13609 No such file or directory
          oracle          recvmsg   11 36121 Resource temporarily unavailable Thanks,
Jess

Im an Oracle guy - not the SA type -
But on ours - the SA configured this cluster incorrectly. We use veritas. instead of making ipmp groups for the interfaces - he built the cluster according to veritas docs. That is - he has two publics - on difference interfaces and different privates on different interfaces. oracle can only two interfaces - no matter if its a ipmp group or a device name. one is used for private- the other is used for public - So sure the veritas cluster filesystems will survive - but the Oracle Cluster will not - nodes will reboot -
Is your system set up incorrectly as i described above? if it is - a quick test would be - turn down the other interfaces - and only leave the two interfaces you mention above up that you configured for Oracle CRS
This other sharp sa was able to go through the arp table and see duplicate IPs - and the routing was attempted via an interface that oracle doesnt see. You can not define two different interfaces public - and two different interfaces for private -

Open Environment error : Resource temporarily unavailable

Hi,
I use Berkeley DB 4.5.2 in a system with Intel PXA255, 64MB memory, 512MB USB disk. The system is Linux 2.4.18, compiler is arm-linux-gcc 2.95.3. I put database files on the USB disk (because the file size is more than 72MB), and the disk still got 70% free space (so I don't think the problem is caused by the disk space).
The same program is run pretty well on PC, Intel P4 3.0, 512MB memory, Red hat Linux 4.2 Enterprise (Linux 2.6.9-22), compiler is gcc 4.3.3.
But it could not even open the Environment on the board. One program shows error message:
Environment open failed: Resource temporarily unavailable.
The other program shows error message:
unhandled page fault at pc=0x00019808, lr=0x000197f4 (bad address=0x000000dc, code 0)
pc : [<00019808>] lr : [<000197f4>] Not tainted
sp : bffff528 ip : bffff700 fp : bffff804
r10: 402d62fc r9 : 402d5c88 r8 : 0001ee90
r7 : 00000001 r6 : 00008a24 r5 : 4001e724 r4 : bffffce4
r3 : 00000000 r2 : 00029cf0 r1 : bffff71c r0 : bffff700
Flags: nzcv IRQs on FIQs on Mode USER_32 Segment user
Control: 397F Table: A3DF8000 DAC: 00000015
Segmentation fault
They are using the same code:
#define __DEBUG 1
ret = db_env_create(&VitalEnv, 0);
if (0 != ret)
#if __DEBUG
fprintf(stderr, "Error in creating environment handle: %s.\n", db_strerror(ret));
#endif
return ret
}/*endif*/
env_flags = DB_CREATE | DB_INIT_MPOOL;
ret = VitalEnv->open(VitalEnv, "./Data", env_flags, 0);
if (0 != ret)
#if __DEBUG
fprintf(stderr, "Environmet open failed: %s.\n", db_strerror(ret));
#endif
return ret;
}/*endif*/
The only difference is that I put these codes in a function called OpenDB() for the second program, and just put these codes in main() for the first program.
And both of them could not open environment.
I have put the arm version libdb-4.5.so on the USB disk. Everything I did but the problem is still there.

Hi Lesslielee,
We will try to fix first the "Resource temporarily unavailable" issue. Is not very clear for me which/what/where application/databases you had moved and when.
Do you have Berkeley DB's additional error reporting turned on? With the error reporting turned on, do you see any additional error information when this exception is thrown? ( http://www.oracle.com/technology/documentation/berkeley-db/db/ref/debug/runtime.html )
From what I understand, when you are storing the databases on the disk (not on the USB drive), the tests are running well, right? When you are moving the database files on the USB drive, are you also moving the environment files? Storing environment files on an NFS file system is not supported.
When Berkeley DB database environment shared memory regions are backed by the filesystem, it is a common application error to create database environments backed by remote filesystems such as the Network File System (NFS), Windows network shares (SMB/CIFS) or the Andrew File System (AFS). Remote filesystems rarely support mapping files into process memory, and even more rarely support correct semantics for mutexes if the mapping succeeds. For this reason, we recommend database environment directories be created in a local filesystem.
Does the problem occur when you run the application for the first time in the new configuration? How did you moved the databases? How did you closed the environment last time?
For more information, please see the "Remote filesystems" section of the Berkeley DB Reference Guide, available in your download package or on our web site at: http://www.oracle.com/technology/documentation/berkeley-db/db/ref/env/remote.html
Thanks,
Bogdan Coman

Terminal: -bash: fork: Resource temporarily unavailable

I'm having
"-bash: fork: Resource temporarily unavailable" when I open up the terminal on my 10.4.6 system. The only way to remedy this issue seems to restart which is at minimum annoying. The other odd thing is when this occurs and if I open up the system preferences I can not interact with the GUI interface until I close the terminal. All the preferences are greyed out.

I figured out what the problem is. Seems like the 10.4 OS has a 100 process limitation. So if you are power user of all things OS X (i.e. dashboards, and at least 20 open apps) among other OS process you'll come across this limitation. Try to limit the number of process perhaps killing all your dashboard widgets might remedy the issue. Hopefully 10.5 resolves these users.. since 8 GB RAM shouldn't have hardly any limits except hmm upgrading to 16GB

Fork() failure [Resource temporarily unavailable]

Occasionally our webserver will fail to start a CGI with this error message "fork() failure [Resource temporarily unavailable]".
I think this is caused by lack of RAM. Is this correct? Can we configure the Solaris 10 OS to use disk space when there is a shortage or to hang the thread until space is available?

The system will use disk in place of memory if you have configured a swap device.
Which is standard practice.
You can check if you have swap configured with swap -l
But lack of virt memory is only one thing that could be causing it.
If your CGI script is leaving zombie processes, you could be running out of PID's for example.
In this case you should see a lot of "defunct" processes in your ps output.

Wsaewouldblock resource temporarily unavailable,pls help me to resolve it

Similar Messages

Maybe you are looking for