WSDL Access URL for Metadata Access

Hi
Can someone suggest what is the WSDL Access URL in receiver Communication channel for Direct Point-Point connection scenario.
I can't find the details in SOAMANAGER service.
Thanks,
Murthy

Hi Murthy,
Have a look at this:
http://help.sap.com/saphelp_nwpi711/helpdata/en/84/eb5c292c184f97806a07272babc9bf/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50b63e8f-a4bb-2a10-e9b1-ba803fd06739?quicklink=index&overridelayout=true
Regards,
Naveen

Similar Messages

Settings URL for WebDAV Access

Hi,
I am not able to create the cFolders Settings URL for WebDAV Access. I have created an external alias "cfolders_webdav" & as per the syntax for URL --->
<Protocol>://<Server>:<Port>/<External Alias settings>, I have created a URL "http://etdspd01.corp.clp.com.hk:8000/cfolders_webdav". However this is not working.
Can someone pl give any clue?
Thanking you in advance.
Regards
Deepak

Hi Jochen,
Thank you for your reply once again. I was doing exactly the same thing that you've mentioned (plugging the URL into my browser). Later I realized my folly & created the WebDAV URL into "My Netwrok Places". Nevertheless your reply helped me confirm that what I was going in the right direction.
I sub-question to the above topic. What role does WebDAV play in archiving of documents? How does it help in pushing the cFolders documents to a Document Management system?
I would appreciate your inputs on this as well.
Regards
Deepak

Http500 when trying to access URL for Oracle Application Server Console

We have a new install of R12.1.0 on Windows 2003 R2 (32bit). The Applications seem to work fine. Users can access the R12 applications and submit jobs.
We need to configure a new oc4j instance, so we are trying to access the Oracle Applications Server Console for the first time. After entering the URL below, we encounter an Http 500 error. The Application server console service is running.
http://wbf-soadb.bolthouse.int:18100/emd/console
Thanks

Mark,
The document (Note: 603716.1 - Using AS10g AS Control with eBusiness Suite Rel 12) used to be available for public access but seems not anymore. Please log a SR to get a copy of this doc as you need to follow the steps in this doc to access AS Control with R12.
Thanks,
Hussein

Unable to access URL for a webservice in weblogic integration server

Hi
I have an application in which i deployed a webservice , however when i am trying to access it , it throws the exception weblogic.webservice.tools.wsdlp.WSDLParseException . "failed to retrieve WSDL from URL"

Hi
The error you typed is not enough. Can you please give us more information about error in log. (wls and application log)

Setting up access points for public access

Okay, here's the situation. I have a PowerMac G4/1.25GHz dual processor running Server X 10.3.9 with four Mac clients (a small law office). Up until recently, everyone had also been running (client) 10.3.9, but I started upgrading some of them to 10.4 (currently 10.4.5). When I did this, they started running into problems with Word sometimes giving a "network or file permission error" when attempting to save documents to the server. After weeks of posting questions to Word support and trying everything in the book that I could think of, I found Apple recently posted what appears to be the answer to this (article 302979, "Microsoft Office applications fail to save to a server volume." The problem? I have all four users logging into the same account on the server, and when one of them logs out, it zaps everything in a Microsoft-created temp folder on the server, including temp files created by open documents created by other clients. Sheesh.
I had everyone set to use the same account because they have no need of document security -- everyone should be able to get into everyone else's files on the server, period. So, because of this snafu, I've created separate accounts for each of the users. My problem now is that, if user "X" creates a file or folder on the server, user "Y" cannot modify it because it is created as read-only. Strangely, if someone modifies an existing file, it doesn't change the user rights at all -- not sure why.
I'll admit to being a bit of a novice with Server X but am familiar with parent/child folder permissions -- I think I've got everything set right, but I must obviously be missing something. Here's what I've got setup, and what I've tried. If anyone can point out how I've got this setup improperly, I really need to get this fixed... thanks.
I have a single sharepoint ("workfiles"). I used the "public" folder as an example, and set the owner to "root" and the group to "staff". Further, I set the owner, group and everyone privileges to "read & write". I've also tried setting the group to "admin". All the individual user accounts I've set are also setup as admin users. I've tried setting each users's primary group as "staff (20)" or "admin (80)". I've copied all these privileges to all enclosed items, which does reset everything to public access, but as soon as someone creates a new folder or file, that folder/file becomes private to that user (it shows up with the creator's username as "owner" (r&w), group as "admin (read-only), and others as "read-only" as well.
PS: If upgrading the server to Server X 10.4 would help, I'm sure I can arrange that.

In our law firm, the server (10.4.4), we have set access to read/write access so staff can open client files/folders, edit then and close, etc. That seems to be working okay. Before the tech worked on permissions, if someone created a letter another staff member could open it, but it was read-only.
The problem we are having is that if a file that is clicked on stationery pad and we want to edit it, it will not allow us to. For example, if we need to edit our letterhead that normally comes up as an untitled document, if I unclick the stationery pad box, it unclicks, but it still comes up as an untitled document. I even tried to unclick a stationery pad on a document that I created before the server upgrade and it wouldn't let me.
If I create a brand new document and put it on stationery pad, it comes up untitled as it should. If another user on another desktop wants to make changes, they unclick the stationery pad box, but when they open it, it comes up untitled and in checking get info, the stationery pad is selected.
The tech set it up as follows:
Share Points and All tabs:
General tab: box to share this item and its contents is clicked
Access tab: owner, group and everyone have read/write privileges
If select dial at bottom to propagate permissions, all boxes are checked, except for access control list, which is shaded.
I cannot drag/add anything to the control list and the pencil and the minus sign is shaded
Protocol tab: Both boxes, share item using AFP and Allow AFP guest users are clicked. But for better security in reading the article, this should be unchecked.
Also under the protocol tab: the inherit permission from parent radio dial is clicked, not the use standard POSIX behavior.
What are we missing?
Thanks, Cheryl

Background Daemon URL for Virsa Access Enforcer 5.2

Hi,
I have Virsa Access Enforcer 5.2 installed on one of the JAVA stack system which not getting used. We are seeing following errors for every seconds in default trace. Does anybody knows where to enter this "'Background Daemon URL" so we can atlease stop these errors?
WARNING: Cannot get Application URL: null. PLEASE SET 'Background Daemon URL' IN CONFIGURATION TAB
java.lang.StringIndexOutOfBoundsException
#at java.lang.String.substring(String.java:1067)
#at com.virsa.cc.common.util.ConfigUtil.setDefaultJ2EEParam(ConfigUtil.java:214)
#at com.virsa.cc.common.util.ConfigUtil.getBgJobStartURL(ConfigUtil.java:201)
#at com.virsa.cc.xsys.bg.AnalysisDaemonThread.run(AnalysisDaemonThread.java:47)
#at java.lang.Thread.run(Thread.java:770)
Thanks

Martin,
I have already tried that note. But no luck.
Thanks

Using Gigabit Adapter for intranet access, wireless for internet access

I have a PowerMac G5 I have been using with a built-in wireless adapter for a couple of years. I also have a Windows PC with a wireless adapter as well. Both of these access the internet over my AirportExpress connected to a cable modem.
I wanted to take advantage of the Gigabit adapter in the PowerMac for copying files directly between the computers, so today I installed a Gigabit card in the PC and connected the two through a Gigabit switch.
Unfortunately, I can't seem to get either the Mac or the PC to get valid IP addresses, let alone talk with each other.
Any idea what I need to do on the Mac to get it to use the gigabit adapter for intranet traffic? I am guessing whatever I do on the Mac I will need to also do on the PC.
Thanks!
Brian

What you're trying to do is called 'dual homing', and it's not really supported by OS X's automatic network configuration, though 'Internet Sharing' is close.
I'd avoid it if at all possible. Connect the computers and the cable modem to the Gigabit switch. If the switch doesn't have routing capability, you might need a router also, to provide DHCP and NAT services. This would save you a lot of grief compared to figuring out how to set up the Mac and Windows for dual-home operation.

Programmatic access to ODI metadata

Hi all,
is there API/SDK in ODI for metadata access?
For example:
1) documented ODI repository structure or public views;
2) using Jython for manipulating metadata;
3) etc.
Thanks,
Oleg

Hi Mukund,
Please check this SAP Note <a href="http://www.service.sap.com/sap/support/notes/199123">199123</a> (Word Settings).
It explains how to avoid this error message.
Best regards,
Ruediger

Help with alternative URL for service endpoint

I'm trying to define a WSDL service that is behind a firewall/load balancer.   By default, the wsdl service-endpoint is defined using the same URL prefix as the wsdl page itself. (e.g https://virtual_servicename...) However, we need to have the service endpoint use a different prefix as it does get converted by the load-balancer. (i.e. a firewall rule passes the traffic between the real host names, no virtual address is used)
Question 1) -- should I be using the transport settings tab in SOAMANAGER config to create an Alternative Access URL for Transport Binding?   (I'm not sure transport binding and service endpoint are the same thing.)
If yes to Q. 1, then question 2) -- when I attempt to create an entry in this area using the correct URL, it ends with the following error: "SRT Framework exception: ICF: Error when creating alias node. Unknown"
Any pointers what alias node is needed and where to defined it?
Thanks in advance.

Hi Joseph,
CHECK THE BELOW
GOTO TCODE: SICF
EXECUTE->SELECT DEFAULT HOST->SAP->BC->SRT->RFC->SAP----HERE YOUR WEBSERVICE PATH , SO THAT YOU HAVE TO GET EVERY TREE PATH SHOULD ENABLE AND ACTIVE IN MENTION ABOVE. OTHERWISE U CANT ACTIVE THE BINDING AND CANT CREATE THE LINK.
GET THE ACCESS FROM THE BASIS FOR YOUR USERNAME AND YOU ABLE TO DO THE CONFIGURATION .
PLEASE REVERT IF ANY DOUBT

URL for Bex Broadcaster

Hi All,
I would like to know if there is any method to pass the value of the variable along with the following URL for directly accessing the broadcaster setting:
http:///sap/bw/BEx?sap-language=EN&bsplanguage=EN&cmd=start_broadcaster&SETTING_ID=<MY SETTING ID>
So that the user should not have to select the variable value in Preacalculate tab.
Thanks in advance
Ammu

Oh do u mean? all this to happen on the fly?
See Broadcaster is to send the report for the end user with some values. If he has to see the same report all the time with different data that is achieved this way. If not create as many settings as different customers and trigger that setting as and when required.
We also have a filter setting provided there in the next tab.
But we cannot pass a variable to the broadcaster. Because the URL just try to hit the appl server directly. and that url is autogenerated with all the parameters set.
Assign points if helpful.
Thanku.
Regards,
Kishore.

Flex encounters "Security error accessing url.Unable to load WSDL"

i have created a flex application which connects to SAP via web service.
when i try to run my flex application i encounter the following error.
"Security error accessing url.Unable to load WSDL"
i went through various posts relating a BSP application and crossdomain.xml
i have created the crossdomain.xml file in the application and
i tried those options and still not able to figure out the problem.
the security error is because of the absence of the crossdomain.xml file, and in which path should i be saving the file?
Kindly help me solve the problem.
Thanks in advance.

Have you seen this blog
"Crossdomain.xml" in ABAP Web AS Server cache

Security error accessing url (Unable to load WSDL)

Hi folks.
I have a Flex project that use a WCF webservice. In my localhost everything is allright, but I want to upload my flex project to a web host (http://www.dorj.ir) and upload my WCF webservice to a server that has a valid IP...
After going to http://www.dorj.ir, you can see this error
Security error accessing url
Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL (http://ip/service.svc?wsdl)
I put the crossdomain.xml file in the root of my server:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="http://www.dorj.ir" />
<allow-http-request-headers-from domain="http://www.dorj.ir" headers="SOAPAction"/>
</cross-domain-policy>
But I have the same error, yet...!
what should I do?!

Have you seen this blog
"Crossdomain.xml" in ABAP Web AS Server cache

What's the correct form of the URL for wiki calendar access in iCal?

I understand the URL for my personal calendar "server.domain.net/webcal", but whats the URL for a wiki calendar? Under SL I used to access wiki calendars in iCal using a URL of the form "server.domain.net/principals/wikis/<wiki_name>" but this no longer works.

Nevermind I figured it out. The correct form is "server.domain.net/principals/__uids__/wiki-<name of wiki>/"

Use Same URL for Internal and External Access for CRM 2015 IFD

I have setup a CRM2015 server for IFD access.
ADFS and CRM are on separate servers.
CRM server all roles
ADFS 2.0 server.
Using the internal URL I am able to access CRM without entering my details (as expected)
Using the external URL I am authenticated by ADFS as expected and can sign in.
We have an internal domain domain.local
We have an external domain domain.com (the certificate is for *.domain.com)
We have a DNS zone created internally for domain.com.
CRM URLs
internal : internalcrm.domain.com
External : externalcrm.domain.com
I would like all users to use the same link regardless of them being internal or external, but I would like so that any user who is on the domain is automatically logged in without entering their username and
password. What is the best way to do this?
I have tried creating a cname record on the internal domain.com zone pointing externalcrm.domain.com to internalcrm.domain.com but that didn't work, I still get the ADFS sign in page.
Thanks

So fair warning, what you're asking for isn't really a supported deployment method of CRM.
That said, you should be able to do some DNS trickery internal to your network that points your "crm.domain.com" to "crm.domain.local" and then hopefully CRM will treat the connection as if it came from an internal network.
Otherwise, you're likely going to have to accept that everyone gets the ADFS login page internal and external to your network.
The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

Single URL for internal and external CRM access when using IFD

Hello,
At one of our client site I have setup IFD on CRM 2011. This IFD is behind TMG. My client is a big corporation therefore all CRM components including CRM, ADFS and SQL are on separate servers.
I have configured IFD using single url https://orgname.contoso.com Their IT staff wants to know why can't they use single URL for internal and external access where internal users are nto prompted for authentication
when logging on to the CRM server. I know you can do URL re-write in ADFS but they want to know the reason "why internal users can't use the same IFD URL and don't get prompted for their credentials". Text below is from their IT staff.

There are several approaches to your question. You need to set up both an internal and an external relying party trust. If you use the external URL, it will always direct you to the signin page, if you use the internal URL, it will resolve you single
sign on.
I've configured IFD for CRM multiple times, and this is how it works. CRM looks at the URL. If you use the external URL (org.domain.com), it will prompt for credentials. So what you are asking for, a single URL that works single sign on internally and prompts
externally really isn't possible.
What I recommend is:
1. make the external URL available internally
2. Configure all outlook clients against the external URL, that way you won't have to reconfigure when someone goes internal to external
3. Have users who are primarily internal use the internal URL for the web client, which will resolve single sign on
4. Have users who are primarily external use the external URL for the web client
For #1, since you only need to enter the credentials when you first configure CRM, it is in all effects single sign on.
One thing I haven't tried that may work is using IIS redirect internally to redirect the external URL to the internal URL. There is also a powershell script in the IFD guide that you can use to make the outlook client switch between the internal and external
URL's, but nothing that will give you a single URL that works as the internal relying party trust when internal and the external relying party trust when you are external.

WSDL Access URL for Metadata Access

Similar Messages

Maybe you are looking for