WSDL for portlet based taskflow - doesn't show up input parameter

Hi,
I have created a taskflow which takes an input parameter in an ADF application. When I drag and drop on the page it works as expected.
My requirement is to show this taskflow as part of webcenter portal app.
I have created portlet entry based on this taskflow. When I deploy this ADF application, in the generated wsdl I am not finding the inputParameter which I have defined in taskflow. I am looking for how to pass parameter when I embed/consume this portlet in webcenter portal.
I can see the parameter in generated [portlet.xml|http://adf-sample.googlecode.com/files/wsrp2.xml] file. And for the taskflow (in portlet section) the parameter is picked in public render parameters.
Any hints would be appreciated.
I am using Jdev 11.1.1.5

Hi Daniel,
Thanks for the update.
Well, I haven't thought of this approach. I will try and let you know. Pls share if you have any reference for this.
Appreciate if you can also share, when to go for taskflow based portlets vs consuming taskflows directly in portal app.
Thanks,
Srini.

Similar Messages

  • I got a new iphone 5 because they couldn't fix the old one, can I download Iwork for free, because it doesn't show free in app store

    if you get a replacement iphone from apple after 1st of september can you download Iwork for free? Because it doesn't show free in the app store

    Pages, Numbers, Keynote, iPhoto and iMovie are free only with new devices, a refurb does not count.

  • Course Apprisal for Web Based Traning is not considering the inputs values

    Dear All,
    We have created Course Appraisal Template for Web Based Training.  It is reflected in portal and we are able to see the template and we can give the values also.  When I am executing the template the following error is showing " The status change not possible"
    Please advise me in this.
    Regards,
    Milan

    Hello,
    What's the format of the TrainingID, is it the same in both cases?
    How do you know the value isn't being passed - could it be that it's not passed correctly?
    What's the error message?
    regards
    Rick Bakker
    Hanabi Technology

  • I have a Sharp Aquos lc-40e67un that and new Apple TV. It doesn't show an input plugged into any HDMI port I try to use.

    I have a Sharp Aquos lc-40e67 television that is 5-6 years oldthat and a brand new Apple TV that doesn't show up as an input in any HDMI plug I hook it to. Is my television too old to use the Apple TV technology?

    I checked all power connections first, then tried every available HDMI port on the tv. There was nothing showing on the input page that indicated anything new was available.
    I'm not sure how to update firmware, inasmuch as I can't get the device onscreen to see any options.
    I tried everything I could think of, including scouring the net for information before I posted my question here for help. Perhaps my 6 year old Sharp just predates any ability to use such hardware.

  • Desktop Software for Mac Lion OSX Doesn't Show or Sync any Contacts

    Hi there,
    I am a brand new Blackberry user and so far am VERY frustrated. I also own an iPhone and love the thing because it just WORKS. Anyways, I downloaded the Desktop Software so I can sync my Mac Address Book with my Blackberry Curve 9360. Souldn't the software give me a choice of where I would like to sync my contacts from? It doesn't. And it just shows a blank empty list. I read another topic on here that iCloud needs to be disabled. I'm not sure how exactly to disable it but believe I did. But it still shows a blank list. Besides, iCloud is very handy and why would I want to turn it off. Shouldn't BLACKBERRY fix this problem so it works? I am not happy and if this doesn't get resolved in the next 24 hours, I will be returning to Rogers and sending this phone back and will NEVER return to RIM again. No wonder the stocks are plumiting. PLEASE HELP ME! I'm a tech savy guy and even I can't figure out how to get my contacts onto my Blackberry without doing it manually (which isn't going to happen).

    Isn't it simply because of the known problem with iCloud sync enabled?
    This operation makes the address book and calendar(s) invisible to BBDM as the data files are "removed" from the Mac and put "in the cloud"...
    Several posts are documenting the problem and suggest some alternatives or work around (by disabling iCloud).
    Look on the forum for additional details.
    Please don't forget to mark as "solved" if your question is replied and to "like" a useful reply to your post ;-)

  • PSE 8 Mac---thumbnail for actions I install doesn't show up

    Hello,
    I am hoping to get some advice here.
    I recently upgraded to PSE 8 for Mac.  I have a number of actions (.atn files) that I purchased in the past and use with PSE.  I installed just one of them to make sure I could get it to work in the new program before I installed the rest of them.
    The action is installed, it works, but there is no thumbnail image to show which action it is.  If I mouse-over the black box where the action is, I get text that shows the name of the action.  That, of course, will work, but is impractical, and it seems unneccessary, to run the program that way!
    Does anyone have any suggestions or ideas on what I need to do?
    Thank you so much for your help.
    DeLynn

    Thank you, Barbara.  I can see that is the problem.  There are actually files there that show up when I look in the photo effects file (a thumbnail that is the appropriate size), but I just tried to open them in PSE and got an error message.  I will go back to the original file and start from there. 
    Thank you for the help.
    BTW, I looked for your book for PSE 8 yesterday but didn't see it.  I will order it! I love your Missing Manuals!

  • I'm missing the back cover and flap for my book. Doesn't show up in the interface. How can I restore these?

    I'm missing the back cover and flap for my book in the layout interface. Does anyone know how to restore these?  I've searched the interface but can't find an option to add cover/flap. Don't want to order a book without it.
    Any advice is welcome!

    Time to repair you library: do the following:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
    2 - run Option #4, Rebuild Database.
    3 - if necessary repeat with Option #1, Repair Permissions.

  • Billed for purchase, but purchase doesn't show up

    Hi!
    I tried to purchase an album off the iTunes store. I clicked "Buy", signed in, all that good stuff. I received a dialog box asking me if I was really sure that I wanted to buy the album. And, to be safe, I said no. So, I thought everything was fine, until I realized I had still been charged the $8.00 for the album, but the music wasn't in my purchase history or available downloads list. This is a huge problem - I just lost almost $10.00! Anyone had this happen, and if so, how can I fix it? Thanks in advance.

    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html

  • Why is it that when i trash files from my system drive it asks for my permission but doesn't show up in the trash bin?

    Hey guys, need help.
    I've been trying to figure out why everytime i delete files from my system drive, it doesnt show up in my trash bin.
    Has anyone encountered the same issue?
    Would appreciate any help guys.
    Thanks.

    1. Triple-click the line below to select it:
    ~/.Trash
    2. Right-click or control-click the highlighted line and select
    Services ▹ Show Info
    from the contextual menu.* An Info dialog should open.
    3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
    4. In the General section, uncheck the box marked Locked if it's checked.
    5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
    6. Close the Info window and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • I have an Iphone4s and I turned off imessage for awhile today and when I went back later to turn it on it just says: "waiting for activation" my number doesn't show up. I don't know what to do! Help!! I tried airplane mode

    Help

    Hello there, morganbailey02.
    The following Knowledge Base article provides some great steps for troubleshooting your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • 'check for updates' in itunes doesn't show 10.7

    is it available yet or not?

    It's available. If you can't see it in your Software Update, try updating using a .dmg installer downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • DAQ doesn't show the input waveform in Labview as it is in oscilloscope.

    Just bought a PCI-6035E DAQ board + CB-68LP connector and testing it by inputing a square/triangluar/sine wave from a wave generator. In MAX, I can see the waveform as in the oscilloscope. However, when I try to see this input in Labview by using the Waveform Chart VI, the displayed waveform becomes an arbitrary one. Why is it happening and how can I correct it? I'm a novice in this field, so your advice would be highly appreciated.

    Seems that there's something missing in connecting to the daq card: in most cases this situation occurs when the signal reference is missing. When you input a signal in an oscilloscope, you wire both a signal and its reference (ground or similar), otherwise you see nothing than noise and disturbs.
    With a daq card things are a little more complicated 'cause you have a more flexible and more universal instrument than an oscilloscope; you must decide which type of connection to use: referenced- or not-referenced- single ended or differential connection, which channel(s) to use... and the configurations in MAX and in labview must match if you want to simplify your job.
    I suggest you to study carefully the card user manual when it describes the analog input w
    iring and all the consideration about different types of connection. My experience is that in most cases the differential input is better to reduce signal noise and reject disturbs, but you must use 2 channels per signal...
    You can also look at this tutorial about wiring an input signal:
    http://zone.ni.com/devzone/devzoneweb.nsf/opendoc?openagent&2E07CE2019CCB1D3862568650057930A&cat=99368070225FE073862567E6006C8DD7
    You're entering a (slightly) complicated but (very) interesting world. Good job!
    Roberto
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • Downloaded Safari 5, doesn't show after multiple installs / reboots

    I went to apple.com and downloaded the latest is Safari 5 at http://www.apple.com/safari/download/ and downloaded the package, ran installation and then rebooted the Mac.
    I tried this several times. When I tried to check for any Safari, it doesn't show after installation.
    The only contents on the Mac named 'safari' is the .dmg I used. And I tried to install more than once.
    I did click on the dmg and did actually use the installer package.
    I did also restart the Mac 10.6.8.
    I did open my System Profiler (Applications/Utilities), and clicked the gray disclosure triangles so that they face down. No Safari.
    I found another thread discussing this, but could not make any of the suggestions work, and several I couldn't even find.
    Thanks,
    Tony
    Hardware Overview:
      Model Name:    iMac
      Model Identifier:    iMac10,1
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    3.06 GHz
      Number Of Processors:    1
      Total Number Of Cores:    2
      L2 Cache:    3 MB
      Memory:    4 GB
      Bus Speed:    1.07 GHz
      Boot ROM Version:    IM101.00CC.B00
      SMC Version (system):    1.52f9
      Serial Number (system):    QP******5PC
      Hardware UUID:    6D4B1C2A-800A-5E20-B0A7-3791AE3F5CA2
    <Serial Number Edited by Host>

    Not in Applications.
    Did this download / install multiple times. It's a problem that has happened to others who have posted here.
    Tony

  • RMBP doesn't show correct 'available HDD space'

    Hi,
    I'm using rMBP 15" early 2013 with OSX 10.9.5. My problem is (for a while) OSX doesn't show correctly my available HDD space. It is internal 256 GB SSD. How can i know that it doesn't show correctly? Because my Disk Utility says 69.64 GB free space but my Finder says 92.14 GB (Huge difference) ! Also my PC partition tells about different story but i don't care it (Who cares silly billy Windows? ) My guess is Disk Utility says correct.
    This problem started with Diablo III. I installed it (13 GB download for a patch !!! c'mon Blizzard) and after that my Finder starts to lie to me (Before installation, both Disk utility and Finder says 101 GB approx.
    Any idea?
    p.s : İ did several times Repair disk permissions and repair disk. Please don't advise it..
    Thanks

    Go step by step and test.
    1. Start up in Safe Mode.
        http://support.apple.com/kb/PH11212
    2. Empty Trash.
       http://support.apple.com/kb/PH13806
    3. Disk space / Time Machine ?/ Local Snapshots
      Local backups
       http://support.apple.com/kb/ht4878
    4. Re-index Macintosh HD.
        This will take a while. Wait until it is finished.
       System Preferences > Spotlight > Privacy
       http://support.apple.com/kb/ht2409
    5.Try OmniDiskSweeper. This will give the storage size details of the items.
       Select Macintosh HD and click  “Sweep Selected Drive” at the bottom.
       Delete the files yo don’t want to keep.
       Be careful. Delete only the files that should be deleted.
       https://www.omnigroup.com/more

  • New iPad; Apple ID account review doesn't show "FREE" option

    When I set up my iPad 2, the free option where it asks for a credit card doesn't show up. with this, I could not download any app. Pls help

    Settings>Store>Apple ID>View Apple ID>tap on Payment Information>select None
    http://support.apple.com/kb/ht2534

Maybe you are looking for

  • Error consuming Web service - content type text/xml;charset=utf-8 of the response message does not match the content type of the binding

    Hi all, We are trying to interact with Documentum server through DFS exposed WCF which communicates through port 9443 and we are provided with documentum issued Public Key certificates. We have successfully imported the certificates in client machine

  • Reader add-on will not stay in IE 10

    I recently upgraded from IE 9 to IE 10.  I cannot open .pdf files in IE 10, although I can save them to my desktop and open them from there.  Firefox opens .pdf files. I went to manage add-ons in IE 10, and Reader was not there.  I re-installed Reade

  • Problem when add the subject

    hi.. i'm trying to send email from a ASA Sybase database.. i register the class or the jar and call to the java method wrapper.. easy.. the problem is when adding the subject or the text of the email.. the proccess stuck there and don't send the mail

  • How to get screen Unmagnified.

    I hooked up my computer to the tv, and the screen never went back to normal. It's magnified, I can't figure out how to switch it back, can someone please help me?

  • Error when trying to add examplesserver to the target....

    Can anyone point out what I'm not doing correctly, -Configuring the J2ee Deployathon -WL 6.1 Sp2 -Oracle 9i -db name - petstore -server - server1 url - jdbc:weblogic:oracle:petstore driver - weblogic.jdbc.oci.Driver Properties - user=SYSTEM password=