WSDL generator for web-service behind a router/proxy

I create jax-ws service and deploy it on local network computer (LS:port1)
and set up direct port forward from computer in DMZ ES:port2 to LS:port1.
When I browse for http://ES:port2/sevice/serviceport?wsdl it generate invalid schemaLocation
<types>
<xsd:schema>
<xsd:import schemaLocation="http://LS:port1/sevice/serviceport?xsd=1"/>
</xsd:schema>
<service name="hello">
<port name="hello" binding="tns:helloBinding">
<soap:address location="http://LS:port1/sevice/serviceport"/>
</port>
</service>
</types>I thought the links are generated by request context
jdevstudio11123, wl 10.3.5.0
Can I forcedly set service location?

yes, you can set ENDPOINT_ADDRESS_PROPERTY on BindingProvider for requestContext
requestContext.put(BindingProvider.ENDPOINT_ADDRESS_PROPERTY,"http://example.com/webservices/service1");
For complete code please look below link
http://docs.oracle.com/cd/E12839_01/web.1111/e13758/jws.htm#autoId11
http://jax-ws.java.net/articles/MessageContext.html
Regards,
Sunil P

Similar Messages

Best practice for web servers behind a router (NAT, ACL, policy-map, VLAN)

Hi,
I'm a new Network admin, and I have some configuration questions about my installation (see attachment).
I have 3 web servers behind a router.
Public interface: 3 public ip adresses
Private interface: router on a stick config ( 3 sub-interfaces, 3 different networks, 3 VLAN)
I would to know the best way to redirect http traffic to the right server.
My idea is to map a public address to a private address, via NAT, but I'm not sure for the configuration. I could also redirect via Policy-map and filter by url content.
So if you have some advise for this case, it would be really appreciated.
Thank you.
Chris.

Hello Christophe,
As I understand you want 1st that ;
if somebody go to A.local.com from internet then he will redirect to 192.168.1.10 in your internal network.
That means, you need static mapping between your public @ip address and your local ip address.
for this example, your local interface is Fa0/0.1 and I dont your public interface because it is not mention in your diagram. I will suppose S0/0 for public interface.
that is the config for the Web Server1. You can do the same with the remaining servers:
interface fa0/0.1
ip nat inside
interface serial0/0
ip nat outside
ip nat inside source static 192.168.1.10 172.1.2.3
static mapping from local to public.
I suppose you have done the dns mapping in your network and the ISP have done the same in his network.
ip route 171.1.2.3 interface serial0/0
or
ip route 0.0.0.0 0.0.0.0 interface serial0/0.
After these step for each web server, you will get the mapping.
Now you can restrict access to this ip only to http or https protocol on your isp and after on your local network
like
ip access-list extended ACL_WebServer1
permit ip any 192.168.1.10 eq www
deny ip any 192.168.1.10
exit
interface fa0/0.1
ip acess-group ACL_WebServer1 in
no shut
exit
That is the first step.
Second step : you want to filter traffic by url, that means layer 5 to 7 filtering.
I am not sure that it is possible using cisco router with (ZBF + Regex).
Check the first step and let us know !
Please rate and mark as correct if it is the case.
Regards,

WSDL generated by web service map

Hi,
I am totally new to ODSI. I noticed that the WSDL generated by the Web Service Map for a Data Service always contains two schemas in the types section, with an import directive in the first schema which refers to the second. The structure of the types section is something like this:
<types>
<xs:schema>
<xs:import namespace="N1">
</xs:schema>
<xs:schema targetNameSpace="N1">...</xs:schema>
</types>
The question is : is it possible to have a single schema instead of two in a logical data service? In other words, to what extent can the WSDL be customized?
I apologize in advance if the question is dumb, but as I have said, I am totally new to this product.
Thank you very much for your help
Alberto

The request and response elements will always be generated in the form below. It cannot be customized.
<xs:schema targetNamespace="ld:hello_ws" elementFormDefault="qualified" xmlns:stns="ld:hello_ws" ... >
<s:element name="HelloWorld">
<s:element name="HelloWorldResponse">
</>
Unless the targetnamespace for your logical data service matches, there will always need to be a second schema element.
Your logical dataservice can have whatever schema you want.

Why do I get parsing errors with my WSDL URL for Web Services usage

Hi,
I am puzzled with the errors I get when I want to create a Web Service datastore.
Scenario: I have created a SAP Web Service from CRM using SOAMANAGER. The WSDL URL produced by SOAMANAGER is accessibile when pasting the URL directly in Internet Explorer. WSDL URL [http://UXCIQ0M.WDF.SAP.CORP:50076/sap/bc/srt/wsdl/srvc_CBDCB34C89C29304E10000000A4282C0/wsdl11/allinone/ws_policy/document?sap-client=504]
When using the WSDL URL in the Web Service datastore URL field, I get the error An error occurred while importing metadata: WSDLException; faultcode=PARSER_ERROR: Problem parsing: The element type "br" must be terminated by matching tag "/br". (BODI-1111469) (BODI-1112446)
When I save the WSDL defintion in a local file and use a local file path, I get the errors An error occurred while importing metadata: WSDLException (at /wsdl:definitions/wsdl:portype/wsp:Policy): faultcode=INVALID_WSDL: Encountered unexpected element 'Policy. (BODI-1111469) (BODI-1112446)
My questions:
- Why do I get different parsing errors despite the fact that the XML is the same?
- The WSDL is generated by SOAMANAGER. Shouldn't it work directly when integrating with Web Services generated from an SAP environment?
- Is this related to confiurgation issue? I have set the Job Manager to Support adapter, message broker and SNMP communication
- What is the difference between the datastore of type Adapter and the datastore Web Service? In the white paper [http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/20bd5e60-11f9-2b10-2bbb-b5109cceff08?quicklink=index&overridelayout=true] it is mentioned to use the Adapter type to consume a Web Service. It is not clear to me why we have those 2 types.
Thanks & Best Regards
Isabelle

Some updates on this issue, which might help others in the community.
- Data Service doesn't support ws_policy.
- SAP NetWeaver 7.0 SOAMANAGER generate WDSL with ws_policy. In future releases, it is possible to specify not to use ws_policy
- In most cases, replacing ws_policy with standard in the URL directly, works. It doesn't work with Data Services :(.
- Replacing ALL ws_policy in the XML directly is currently the only way to have the WSDL definition being parsed properly by Data Services.

Problem configure WSDL destination for web services metadata gen and exec

Hello,
First question:
Is WSIL supported by an R/3 4.7 ABAP system?
If yes I'd like to consume web services from it (Function Modules remote-enabled), through WSIL. I need thus to configure 2 WSDL destinations on the SLD for metadata generation and execution.
Second question:
What are the url to fill-in into the destination template configurations?
Thanks for your input,
Tanguy Mezzano

In other words, is it possible to call web services from a R/3 4.7 abap stack with WSIL, thus not through the WSDL. For that we need to set two WSDL destinations in the SLD in section SOAMANAGER.
Or is this only possible for ECC6.0?
Thanks for helping.
Tanguy

Invalid Content Type Error for Web Service

Hi Experts,
We have a XI / PI Web Service, and have created an Adaptive Web Service Model for the same. For using this web service model, we have created a HTTP destination of type WSDL.
This configuration works great in our development and consolidation server.
While working with our production server, with all the settings same as consolidation server, the following error is generated for Web Service call. using the AWS model
java.io.IOException: Invalid content type while requesting http://<host>:<port>/webdynpro/resources/<application_package>/guicall.wsdl. Expected Content-type: text/xml, received Content-type: content/unknown, used user to connect: null
The HTTP destination address is the one specified in bold above.
Also, in later part of the stack trace we are bale to see this error:
com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WS metadata destination
Please guide us on this issue.
Best Regards,
Alka.

Hi Alka,
How did you configure the Webservice Destinations in Visual Admin for a webservice explosed by XI system.
I mean what was the URL specified, did you specify XI SYSTEM userid password ???
How was the webservice published to inspection.wsil in XI system ??
Thanks,
Regards,
Aditya Metukul

How to generate a Web Service Proxy for an ESB Routing Service?

Hi,
I have a SOAP service behind an ESB Routing Service. I am aware that i can call this ESB Service at the SOAP endpoint which can be found at the ESB Console after registration.
But, i want to invoke this service using a Web Service Proxy. My understanding is that, i need to use the WSDL generated for the ESB Routing Service to generate the proxy. The WSDL which can be seen in JDeveloper does not have any soap bindings and hence the tool does not allow me to generate any proxy.
Also, the two WSDLs whose URLs can be found at the ESB Console do not have the soap endpoint properties.
Can someone help me out on the same?
Thanks and regards,
Priya.

Priya,
Just take the SOAP endpoint and suffix it with a ?wsdl
Even the Concrete WSDL endpoint should be having a SOAP endpoint.
HTH
Uday

Error when generating a Web Service from WSDL (Weblogic Workshop)

Hi,
I am using weblogic workshop 10 for implementing web services and its was working fine. But now when I try to generate a web service from WSDL its crashing with the following error;
Could not find one or more classes: "org.apache.tools.ant.launch.AntMain". Please check the Ant classpath.
org.eclipse.core.runtime.CoreException: Could not find one or more classes: "org.apache.tools.ant.launch.AntMain". Please check the Ant classpath.
     at com.bea.workshop.webservices.core.gen.JwsFromWsdlBuilder.buildJws(JwsFromWsdlBuilder.java:107)
     at com.bea.workshop.webservices.ui.wizards.jwsfromwsdl.GenerateJwsFromWsdlWizard$1.execute(GenerateJwsFromWsdlWizard.java:133)
     at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:101)
     at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1737)
     at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:113)
     at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:113)
org.eclipse.core.runtime.CoreException[4]: com.bea.workshop.webservices.core.gen.WebServicesException:
     at com.bea.workshop.webservices.core.gen.GenerationScript.runAnt(GenerationScript.java:154)
     at com.bea.workshop.webservices.core.gen.GenerationScript.createJWS(GenerationScript.java:98)
     at com.bea.workshop.webservices.core.gen.JwsFromWsdlBuilder.buildJws0(JwsFromWsdlBuilder.java:135)
     at com.bea.workshop.webservices.core.gen.JwsFromWsdlBuilder.buildJws(JwsFromWsdlBuilder.java:98)
     at com.bea.workshop.webservices.ui.wizards.jwsfromwsdl.GenerateJwsFromWsdlWizard$1.execute(GenerateJwsFromWsdlWizard.java:133)
     at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:101)
     at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1737)
     at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:113)
     at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:113)
Caused by: org.eclipse.core.runtime.CoreException: Could not find one or more classes: "org.apache.tools.ant.launch.AntMain". Please check the Ant classpath.
     at org.eclipse.ant.core.AntRunner.problemLoadingClass(AntRunner.java:445)
     at org.eclipse.ant.core.AntRunner.handleInvocationTargetException(AntRunner.java:417)
     at org.eclipse.ant.core.AntRunner.run(AntRunner.java:362)
     at com.bea.workshop.webservices.core.gen.GenerationScript.runAnt(GenerationScript.java:152)
     ... 8 more
I have checked my ANT_HOME and its pointing to the correct location bea\tools\eclipse32\eclipse\plugins\org.apache.ant_1.6.5 and the AntMain classs is present in this path: org.apache.tools.ant.launch.AntMain
If anyone has any idea on this please suggest a solution.
Thanks in advance
-AKJ

Yes, I assume you are talking about ANT_HOME:
see this Screenshot which shows my current settings
[http://i43.tinypic.com/nbrec6.jpg|http://i43.tinypic.com/nbrec6.jpg]
Regards
-AKJ

Could not generate stub objects for web service invocation in ColdFusion

I was able to call the services on the development box - windows server without any problem at all, everything was working fine but the moment i uploaded to a linux box production server I get this error. "Could not generate stub objects for web service invocation in ColdFusion"
What could be the cause of this problem, i have googled a lot but no solution yet any ideas.

Let me make it simple:
1. Server A is our development server.- hosted inhouse with coldfusion installed.
2. Server B is our production server - a linux server with coldfusion installed hosted on the internet
3. Server C is a third party server containing the webservice - this is a windows server with .net
coldfusion is installed on Server A, the code works here and can connect to server C without any problem. It gets the required respone
but when the code was uploaded to server c it gives the error when we run it.
now i tried just a simple code which works fine on server A below:
<cfinvoke webservice="http://www.webservicex.net/CurrencyConvertor.asmx?WSDL" method="ConversionRate" returnvariable="ConversionRateResult">
    <cfinvokeargument name="FromCurrency" value="EUR" />
    <cfinvokeargument name="ToCurrency" value="USD" />
</cfinvoke>
<cfdump var="#ConversionRateResult#" />
But when i uploaded it to server C: it returns the error
Cannot generate stub objects for web service invocation.
Name: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL. WSDL: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL. java.io.FileNotFoundException: /opt/coldfusion8/stubs/WS728929035/NET/webserviceX/www/Currency.java (No such file or directory) It is recommended that you use a web browser to retrieve and examine the requested WSDL document to ensure it is correct. If the requested WSDL document cannot be retrieved or is dynamically generated, it is likely that the target web service has programming errors.
The error occurred in /home/works/public_html/currency.cfm: line 7
5 :     <cfinvokeargument name="FromCurrency" value="EUR" />
6 :
7 :     <cfinvokeargument name="ToCurrency" value="USD" />
8 :
9 : </cfinvoke>
Now if you try the preceeding code on a windows environment it works fine but the moment you put in the in the linux environment it generates this error
I feel that the error may actually be :
java.io.FileNotFoundException: /opt/coldfusion8/stubs/WS728929035/NET/webserviceX/www/Currency.java (No such file or directory)
but i am clueless as to what to do next
Ok so I tried the wget command on the linux
this is what i got
-bash-3.2# wget http://www.webservicesx.net/CurrencyConvertor.asmx?WDSL
--2011-07-02 23:23:42-- http://www.webservicesx.net/CurrencyConvertor.asmx?WDSL
Resolving www.webservicesx.net... 216.8.179.25
Connecting to www.webservicesx.net|216.8.179.25|:80... connected.
HTTP request sent, awaiting response... 403 Forbidden
2011-07-02 23:23:43 ERROR 403: Forbidden.

Failed to generate client proxy from WSDL definition for this service

Hi,
I am using Weblogic 8.1 SP1. I created a webservice which takes a XMLBean object
as parameter and returns another XMLBean object. The web service works fine when
tested using the workshop's test browser but when i am trying to generate a client
proxy trough the workshop's test browser, it displays this warning:
Failed to generate client proxy from WSDL definition for this service
and does not generate the proxy.
I'll appreciate any thoughts on this.
Thanks
Sandeep

Hi Sandeep,
Could you try invoking clientgen [1] directly to see if this properly
consumes your WSDL?
Thanks,
Bruce
[1]
http://e-docs.bea.com/wls/docs81/webserv/anttasks.html#1080160
Sandeep wrote:
>
Hi,
I am using Weblogic 8.1 SP1. I created a webservice which takes a XMLBean object
as parameter and returns another XMLBean object. The web service works fine when
tested using the workshop's test browser but when i am trying to generate a client
proxy trough the workshop's test browser, it displays this warning:
Failed to generate client proxy from WSDL definition for this service
and does not generate the proxy.
I'll appreciate any thoughts on this.
Thanks
Sandeep

WSDL error during generation of ABAP proxy for web service

Hi friends,
I am getting error during the generation of ABAP proxy object for web service developed in .NET .
Error : Proxy generation terminated: WSDL error (<extension> not supported).
How to make this WSDL file compatible for ABAP proxy.
I have tried to edit WSDL file in XML Spy but did not get any option to replace/remove the tag <extention>.
If any one worked on this. Please help me its urgent.
Thanks and regards,
Shivanand.

HI ,
I am having the same issue!!!
Does ABAP Proxy Generation support <extension> ?
Is there a list available of what is supported and what not (please consider I do not have access to sap notes)?
Thanks

Dynamic wsdl for web service proxy

Hi,
I have generated the Web service proxy client based on wsdl used in dev env,
if i have to deploy to production, i have to manually change the WSDL url to point to production.
Is there anyway, I can deploy without changing manually.
thanks

thanks all from the prompt replies.
I still have a query. All i can do is create various WS references in connections.xml and call dynamically. like
Context ctx = ADFContext.getCurrent().getConnectionsContext();
WebServiceConnection wsc = (WebServiceConnection) ctx.lookup("MyConnection1"); // here i can make a dynamic call ...
but this piece of code can work only in UI. what if i need to do the same approach in model from my AM.
Is there a way ??

Re: Why doesn't WL7.0 support get/post bindings for web services ...

hi!!!
Could you pls point to any code example.
thanks
Pushpa
"Richard Berger" <[email protected]> wrote:
>
Manoj: Thanks for the answer - do you have or can you point me at any
code samples
that accomplish this? (Yes, .NET is limited to strings/ints in their
get/post
bindings).
Thanks so much!
RB
PS - Also, can you explain any apparent discrepancy between your answer
and what
the WL documentation stated (again, it may be my misunderstanding).
"manoj cheenath" <[email protected]> wrote:
WL 7.0 does allow you to access the web service through
the browser. It even allows you to invoke service methods
with complex type arguments (.Net only supports primitive
types) and also to view the request and response soap
message for the invocation.
regards,
-manoj
"Richard Berger" <[email protected]> wrote in message
news:[email protected]...
This might be a naive question, but according to the documentation,WL 7.0
does
not support http post/get bindings for web services. Thus, for meto
access a
web service, I need to write a "middle tier" of some sort (I used
the
automatically
generated Java proxy code and JSP). All works fine, but it seems
like
it
would
sure be nice to have HTML forms access web services without havingto
write a
middle tier.
NET does this and it is extremely useful - is there a reason that
BEA
chose not
to provide this feature? (e.g. is it architecturally unsound in anyway?
or is
there an easy way to simulate it?). Given some of the Web Workshoppositioning
re: ease of use and .NET comparison, this seems like an omission.
Any insights are greatly appreciated.
Enjoy,
RB
PS - Here's the info from the documentation
Web Services Description Language (WSDL) 1.1 Specification
WSDL is an XML-based language that describes Web services. WSDL definesWeb services
as a set of endpoints operating on messages; these message containeither
message-style
or RPC-style information. The operations and messages are describedabstractly
in WSDL, and then bound to a concrete network protocol and messageformat
to define
an endpoint. Related concrete endpoints are combined into abstractendpoints (services).
WSDL is extensible to allow the description of endpoints and theirassociated
messages regardless of what message formats or network protocols areused
to communicate,
however, the only bindings described in the specification describehow to
use
WSDL in conjunction with SOAP 1.1, HTTP GET/POST, and MIME.
Note: WebLogic Server supports only SOAP 1.1 bindings.
The WSDL 1.1 Specification is available at http://www.w3.org/TR/wsdl.

This isn't a straight FORM Post as in the http binding support in WSDL. It posts
a soap message.
It's apparent that Workshop supports form-post and form-get.
But I dont see how it is done with straight WebLogic webservices. Does WebLogic
server read the web-services.xml or the WSDL file? I dont see a way to put in
http-post binding in the former and in the latter it seems to be ignored.
Can someone clarify.
Thanks.
Chu-chi
"manoj cheenath" <[email protected]> wrote:
Here is a live example:
http://65.193.192.35:7001/base/SoapInteropBaseService
Here is an example that you can download:
http://manojc.com/?sample2
This is how you run it:
http://manojc.com/?tutorial/doc/howtorun.html
More info can be found from the edocs:
7.0:
http://edocs.bea.com/wls/docs70/webserv/index.html
8.1:
http://edocs.bea.com/wls/docs81/webserv/index.html
Regards,
-manoj
http://manojc.com
"pushpa krishna" <[email protected]> wrote in message
news:[email protected]...
hi!!!
Could you pls point to any code example.
thanks
Pushpa
"Richard Berger" <[email protected]> wrote:
Manoj: Thanks for the answer - do you have or can you point me at
any
code samples
that accomplish this? (Yes, .NET is limited to strings/ints in their
get/post
bindings).
Thanks so much!
RB
PS - Also, can you explain any apparent discrepancy between your answer
and what
the WL documentation stated (again, it may be my misunderstanding).
"manoj cheenath" <[email protected]> wrote:
WL 7.0 does allow you to access the web service through
the browser. It even allows you to invoke service methods
with complex type arguments (.Net only supports primitive
types) and also to view the request and response soap
message for the invocation.
regards,
-manoj
"Richard Berger" <[email protected]> wrote in message
news:[email protected]...
This might be a naive question, but according to the documentation,WL 7.0
does
not support http post/get bindings for web services. Thus, for
me
to
access a
web service, I need to write a "middle tier" of some sort (I used
the
automatically
generated Java proxy code and JSP). All works fine, but it seems
like
it
would
sure be nice to have HTML forms access web services without havingto
write a
middle tier.
NET does this and it is extremely useful - is there a reason that
BEA
chose not
to provide this feature? (e.g. is it architecturally unsound in
any
way?
or is
there an easy way to simulate it?). Given some of the Web Workshoppositioning
re: ease of use and .NET comparison, this seems like an omission.
Any insights are greatly appreciated.
Enjoy,
RB
PS - Here's the info from the documentation
Web Services Description Language (WSDL) 1.1 Specification
WSDL is an XML-based language that describes Web services. WSDL
defines
Web services
as a set of endpoints operating on messages; these message containeither
message-style
or RPC-style information. The operations and messages are describedabstractly
in WSDL, and then bound to a concrete network protocol and messageformat
to define
an endpoint. Related concrete endpoints are combined into abstractendpoints (services).
WSDL is extensible to allow the description of endpoints and theirassociated
messages regardless of what message formats or network protocols
are
used
to communicate,
however, the only bindings described in the specification describehow to
use
WSDL in conjunction with SOAP 1.1, HTTP GET/POST, and MIME.
Note: WebLogic Server supports only SOAP 1.1 bindings.
The WSDL 1.1 Specification is available at http://www.w3.org/TR/wsdl.

Why doesn't WL7.0 support get/post bindings for web services ...

This might be a naive question, but according to the documentation, WL 7.0 does
not support http post/get bindings for web services. Thus, for me to access a
web service, I need to write a "middle tier" of some sort (I used the automatically
generated Java proxy code and JSP). All works fine, but it seems like it would
sure be nice to have HTML forms access web services without having to write a
middle tier.
.NET does this and it is extremely useful - is there a reason that BEA chose not
to provide this feature? (e.g. is it architecturally unsound in any way? or is
there an easy way to simulate it?). Given some of the Web Workshop positioning
re: ease of use and .NET comparison, this seems like an omission.
Any insights are greatly appreciated.
Enjoy,
RB
PS - Here's the info from the documentation
Web Services Description Language (WSDL) 1.1 Specification
WSDL is an XML-based language that describes Web services. WSDL defines Web services
as a set of endpoints operating on messages; these message contain either message-style
or RPC-style information. The operations and messages are described abstractly
in WSDL, and then bound to a concrete network protocol and message format to define
an endpoint. Related concrete endpoints are combined into abstract endpoints (services).
WSDL is extensible to allow the description of endpoints and their associated
messages regardless of what message formats or network protocols are used to communicate,
however, the only bindings described in the specification describe how to use
WSDL in conjunction with SOAP 1.1, HTTP GET/POST, and MIME.
Note: WebLogic Server supports only SOAP 1.1 bindings.
The WSDL 1.1 Specification is available at http://www.w3.org/TR/wsdl.

Manoj: Thanks for the answer - do you have or can you point me at any code samples
that accomplish this? (Yes, .NET is limited to strings/ints in their get/post
bindings).
Thanks so much!
RB
PS - Also, can you explain any apparent discrepancy between your answer and what
the WL documentation stated (again, it may be my misunderstanding).
"manoj cheenath" <[email protected]> wrote:
WL 7.0 does allow you to access the web service through
the browser. It even allows you to invoke service methods
with complex type arguments (.Net only supports primitive
types) and also to view the request and response soap
message for the invocation.
regards,
-manoj
"Richard Berger" <[email protected]> wrote in message
news:[email protected]...
This might be a naive question, but according to the documentation,WL 7.0
does
not support http post/get bindings for web services. Thus, for meto
access a
web service, I need to write a "middle tier" of some sort (I used theautomatically
generated Java proxy code and JSP). All works fine, but it seems likeit
would
sure be nice to have HTML forms access web services without havingto
write a
middle tier.
NET does this and it is extremely useful - is there a reason that BEAchose not
to provide this feature? (e.g. is it architecturally unsound in anyway?
or is
there an easy way to simulate it?). Given some of the Web Workshoppositioning
re: ease of use and .NET comparison, this seems like an omission.
Any insights are greatly appreciated.
Enjoy,
RB
PS - Here's the info from the documentation
Web Services Description Language (WSDL) 1.1 Specification
WSDL is an XML-based language that describes Web services. WSDL definesWeb services
as a set of endpoints operating on messages; these message containeither
message-style
or RPC-style information. The operations and messages are describedabstractly
in WSDL, and then bound to a concrete network protocol and messageformat
to define
an endpoint. Related concrete endpoints are combined into abstractendpoints (services).
WSDL is extensible to allow the description of endpoints and theirassociated
messages regardless of what message formats or network protocols areused
to communicate,
however, the only bindings described in the specification describehow to
use
WSDL in conjunction with SOAP 1.1, HTTP GET/POST, and MIME.
Note: WebLogic Server supports only SOAP 1.1 bindings.
The WSDL 1.1 Specification is available at http://www.w3.org/TR/wsdl.

WLDL files exported from XI 2.0 not valid for Web Service Clients

Hi there,
Im struggling for almost a week with a <b>BAPI WSDL file</b> exported from the XI repository. My scenario is very simple; A BAPI in R/3 exposed as web service through XI using the SOAP adapter.
The intention was to generate a Web Service Client based on this WSDL file, unfortunately I get all kind of errors when trying to generate the client. (using tools like, SOAPScope, XML Spy and WebSphere Developer Studio none of this tools can validate the generated WSDL file obtained from XI)
Can someone <b>Please explain</b> me how/what exaclty do I have to do in order to expose my BAPI as Web Service in XI 2.0? Or Please tell me if this is just impossible in this version of XI.
Thanks a lot!
Rob.

Hi Rob,
It seems that when exporting to a WSDL file from the Repository, <service> and <binding> are missing from the structure.
A way to work this out is to either add them maually, or to create the WSDL from the Directory, using the Create End Point as Webservice in the Tools menu.
When you do that, consider a couple of things:
1. The message interface, by which you create the wsdl should be inbound. The message interface in the scenario should be outbound.
2. In the binding section, the produced url is of the intergration server, and you need to change it to that defined in the SOAP adapter configuration.
Hope this helps.
Avihai

WSDL generator for web-service behind a router/proxy

Similar Messages

Maybe you are looking for