WSDL Introspection works in Flex Builder 3, but fails in Flash Builder 4.5

Hi - I'm getting an error trying to introspect this service in Flash Builder 4.5:
http://85.214.51.185/mercat/IgrWebService.asmx?WSDL
Flex Builder 3 handles it just fine though. Both IDEs are running in OS X.
Is this an issue with Flash Builder, or with the WSDL format? Is there anything I can do to fix it?
Thanks.

Hi - I'm getting an error trying to introspect this service in Flash Builder 4.5:
http://85.214.51.185/mercat/IgrWebService.asmx?WSDL
Flex Builder 3 handles it just fine though. Both IDEs are running in OS X.
Is this an issue with Flash Builder, or with the WSDL format? Is there anything I can do to fix it?
Thanks.

Similar Messages

  • Ipad i have load swf file but swf  is not working proper(flex 4.6) but android is fine to work how

    ipad i have load swf file but swf  is not working proper(flex 4.6) but android is fine to work how

    On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
    On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

  • Java mapping in ccBPM works in PI 7.0 but fails in PI 7.1

    Hi guys,
    at the moment we are upgrading form SAP PI 7.0 to SAP PI 7.11.
    In a scenario for processing of incoming orders we use an ccBPM.
    In this ccBPM there is an mapping where the original xml document of the order are combined with some
    additional information form an web service (multi mapping 2 => 1)
    The result of this mapping is processed further to create an sales order in the backend.
    The multi mapping an java mapping is used.
    Now we are testing the scenario with PI 7.11 and it fails at this mapping step.
    in the workflow log following error occurs.
    An exception with the type CX_ST_MATCH_ELEMENT occ urred, but was neither handled locally, nor de
    Message no. W8899
    I tested the same message on out SAP PI 7.0 system and the whole ccBPM works well.
    When I extract the 2 messages from workflow log and paste them into the test tab of the operation mapping of Enterprise Service Builder of SAP PI 7.11, surrounding by the envelope used by multi mappings
    <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
       <ns0:Message1>
                   XML MESSAGE 1
       </ns0:Message1>
       <ns0:Message2>
                   XML MESSAGE 2  
       </ns0:Message2>
    </ns0:Messages>
    the mapping works without error, but at runtime it fails, throwing the error mentioned above.
    What could be the reason for this error?
    Does the multi mapping change in PI 7.11 at runtime?
    Could it be a problem parsing the multi message?
    Any help appreciated.
    Kind regards
    Jochen

    Hi Raja,
    thanks for your suggest.
    I know this issue, the java class files are compiled using jdk 1.5.
    We made some more tests.
    e.g. created an dummy ccBPM with two mappings, one two spilt the incoming message in two messages (graphical message mapping) and one to merge this two messages to one message again (java mapping)
    the mapping works at design time on test tab, but fails with the same error at rumtime.
    Also we tested one single operation mapping with this two mappings (split via graphical mapping and merge via java mapping)
    This works also at design time but fails at runtime with a similar error shown in smq2
    The error message is Error ST_MATCH_FAIL occured. P1=element-start P2=M
    we tried to add the whole incoming message to the trace by
    getTrace().addWarning()
    but an trace object is never created in for this step in the workflow log.
    it seem whether you can not add trace messages using the command or that the error occures before this command will be used.
    Kind regards
    Jochen

  • Migrating Adobe flex builder 3.0 to Adobe flash builder 4.6

    I am Migrating Adobe flex builder 3.0 to adobe flash builder 4.6. i get one error like"  Declaration of style 'direction' conflicts with previous declaration in C:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\frameworks\libs\mx\mx.swc(mx.controls:MenuBar)."
    So please suggest me how to handle this issue.

    Thanks Bharat Patel,
    I have already read this pdf files. but didnt get any solution.
    So, the issue is  style "direction" conflicts with the swc files.
    so, suggest me the correct answer.

  • DNG conversion 6.6 works on my XP system, but fails to see files on my Vista OS.

    DNG conversion 6.6 works on my XP system, but fails to see files on my Vista OS. Same goes for older versions of DNG.  I use the same setup of security on both systems.
    Can anyone help?

    Run an Apple Hardware test.  That may provide a clue:
    http://support.apple.com/en-us/HT201257
    Note that an error free AHT is not definitive.
    If you have all of your data backed up or an external clone HDD, I would try erasing the internal HDD,  reinstalling the OSX and then upgrading the software to 10.6.8.
    Ciao.

  • Upgrading from Adobe Flash Builder 4.5 to Adobe Flash Builder 4.6

    Can anyone share Adobe's upgrade path (with detailed steps) from Adobe Flash Builder 4.5 to Adobe Flash Builder 4.6

    After having done what looked like a proper UN-install of Flash Builder 4.5, I am trying to install the FB 4.6 upgrade. I get:
    A conflicting or prerelease version of Adobe Flash Builder exists on this computer. The conflicting version must be removed before installing from the current media.
    I dont know what this is, so spending an hour on the phone finally got me to Ankush Bangroo <[email protected]> who knew how to fix this.
    download the cleaner tool from the following site and run it, remove the "Adobe Flash Builder" item, then reboot.
    http://www.adobe.com/support/contact/cscleanertool.html
    Now, you can do a proper install of Flash Builder 4.6 from download.

  • Can I install Coldfusion Builder as a plugin for Flash Builder?

    I already have a licensed copy of Flash Builder 4.x installed, trying to install ColdFusion Builder as a plugin for Flash Builder. When I installed CFB, I selected install as a eclipse plugin and entered the path to the FB directory. Now I can't figure out how to invoke/add the CFB plugin in FB..
    Thanks in advance

    You should have uninstalled rather than simply deleting CFB 2 plugins manually .
    Please do the following  to fix it now. (If you have used Uninstaller to uninstall that would have cleaned all these things ):
    Take a backup and delete the file: /Library/Application Support/Adobe/Uninstall/{b8c666c3-1efd-11b2-bf3c-e04be4b2b610}.db
    And you will be able to install CFB as plugin to Eclipse now.
    Thanks,
    Krishna

  • Desname parameter works fine in Report builder but fails in Forms builder

    Hi,
    I need some help with my current task. Here is my problem.
    I am working on Oracle 10g. My reports and Forms builder version is 10.1.2.3.0.
    My objective is to use Forms builder to call a report which will direct the output directly to the printer without preview.
    First , in report builder , I use the Parameter Form builder and set Report parameter DESTYPE = PRINTER and the DESNAME automatically changes to PCL6 ( which is the network printer name I am using).
    When I run the report , the output is directed to the printer and it works just fine.
    But in Forms builder , when I call the same report, set the DESTYPE as Printer and DESNAME as 'PCL6' , it gives an error Invalid printer name 'PCL6' specified by parameter DESNAME.
    I tried searching in this forum, it says the error is due to an invalid printer name specified in the DESNAME. But if my printer name is invalid, I wonder how the same printer name works well in Report builder?
    My coding in Forms as below :
    SET_REPORT_OBJECT_PROPERTY( repid, REPORT_DESTYPE,PRINTER);
    SET_REPORT_OBJECT_PROPERTY( repid, REPORT_DESNAME,'PCL6');
    Appreciate if anyone can help. Thanks
    Regards
    Shiva

    Hi Puppethead,
    I have tried with your suggestions.
    the following condition -- did not work
    ( (mgr_name = :manager name)
    OR (mgr_name LIKE DECODE(:manager name, 'ALL', '%', NULL)))
    but for the other condition ---
    ( (mgr_name = :manager name)
    OR (mgr_name LIKE DECODE(nvl(:manager name, 'ALL'), 'ALL', '%', NULL)))
    is wrong because, :manager name cud be null, when it is null, it takes 'ALL' i.e. '%' which shud not be the case.
    if the user enters null, it has to display records with null only but with the above condition it takes '%'
    The main issue which i dont understand is, the report works fine for the first time. for the second time, the report takes null values . why is it taking null values for the second time.
    Thanks

  • ANT Deployment issue. works fine in one environment but fails in other

    Hi,
    Ant script is working fine in Dev environment but is failing in the other environment. Somehow the BPEL server is not able to pick the latest deployed process , due to this the dependent BPEL processes are failing. If we restart the server , it moves forward and then fails at the point where it couldn’t find reference to the processes deployed after restart. Restarting the server at every failed interval will deploy all the BPEL processes which is not the solution.
    example : we have BPEL Processes say A, B, C, D and E. A,B are independent processes C is dependent on A, D is independent and E is dependent on D. So I have Ant script to deploy in A,B,C,D,E order. Now I run the Ant Script: It deploys A,B processes and Fails at C saying it couldn't find the process A.wsdl(But A is deployed). So if i restart now it recognizes A and B are deployed so C is also deployed succesfully it also deploys D as it is Independent but fails at E. If i restart the server E is also deployed.
    The Environment is clustered.
    Any suggestion to make my Ant script to run at a go will be highly appreciated
    Thanks
    Krishna

    Hi KrishnaBhaskarla,
    I have something related to ant script, Can you please provide me the steps for deploying applications using ant script.
    Regards
    Kumar

  • Using Flex Component Kit for FlashCS3 in Flash Builder

    Hi at all,
    i apologize for my english.
    I'm using Flash Builder 4 and i've created a movie clip symbol in Flash CS4.
    I convert the flash symbol in Flex Component but Flash Builder sends a "Verify Error" because the mx.flash.UIMovieClip class in the Flex Component Kit package is not updated at mx.flash.UIMovieClip in Flex4 library,
    Is there a updated version of Flex component kit? At this moment i'ive a 1.1.2 version.
    Thanks.
    F.

    You should be able to get version 2.0.0 of the MXP in the open source repository:
    http://opensource.adobe.com/svn/opensource/flex/sdk/trunk/frameworks/flash-integration/

  • How to use Flex SDK 4.0.0 in Flash Builder Burrito?

    Hello!
    How can I create a project with Flash Builder Burrito that builds against the Flex 4.0 SDK? I tried to copy the 4.0.0 sdk folder over from my Flash Builder 4 installation, but if I create a new project in burrito, it still offers me only choice between 3.5 and 4.5
    what else do I have to do?

    Did you configure it in Window / Preferences / Flash Builder / Installed SDKs?

  • Flex Unit 4 Beta 2 and Flash Builder

    Hi
    I've downloaded Beta 2 and have got the sample ant task working how I want.
    I'm having problems running tests in flash builder though.
    When I right click and go to execute FlexUnit tests the generated mxml file tries to use the following runner:
    xmlns:flexunit="flexunit.flexui.*">
    <flexunit:FlexUnitTestRunnerUI id="testRunner"/>
    which it can't find.
    No additional swcs were added to the compiler path in the propject properties. Perhaps I just have to add som eprevious version swcs to my lib folder?

    Hi,
    Unfortunately this doesn't have anything to do with the FlexUnit code itself. These are bugs inside of the Flash Builder plugin. You may want to post on their forum as well to try to get some support.
    The only advice I can offer, is that things seem to work much better if I consistently use the Execute FlexUnit Tests, which can be found under the run button. They work much less well if I right click and tell it to execute tests.
    Mike

  • MyPlugin works fine in AdobeReader-9 but fails in AdobeReader-X(10).

    Hi ,
    The plugin which i created using Acrobat SDK works fine in AdobeReader-9 but it doesnt works as expected in AdobeReader-X.
    The issues with Reader-X are listed below :
    1. MyPlugin doesn't get loaded at the top as the other tollbars , which i was able to load MyPlugin in Reader-9. In Reader-X , MyPlugin gets loaded at the right-side panel under 'Tools' Tab.
    2. In Reader-X, there is an option which we can select for 'Enable Protected-Mode'.
         a. If this is enabled i am able to see all the buttons of MyPlugin but when i clicked on each button it wont do its task instead i get error message saying          unable to create HelperObject. Why MyPlugin's buttons not performing its task when the Protected-Mode is Enabled?
         b.If i disable the Protected-Mode , i will see only first two buttons of MyPlugin(MyPlugin contains 4 buttons) and the when i click on those buttons it will be         able to do its task as expected. Why i am not able to see all the buttons of MyPlugin during Protected-Mode disabled ?
    Please let me know what i should do to make MyPlugin work in Reader-X. MyPlugin is working fine in Reader-9.
    Thanks in advance. Please someone help me out from this..

    Hi Richard,
    Sorry , i could not reply to your previous posts.
    In the below link they is a sample for making IE-Plugin work when IE-Protected mode is On.There is explaination on broker process.
    http://msdn.microsoft.com/en-us/library/bb250462(v=vs.85).aspx .
    This below links may also be useful :
    http://msdn.microsoft.com/en-us/library/ms537312(v=vs.85).aspx
    http://www.codeproject.com/KB/vista-security/PMSurvivalGuide.aspx
    We may have to do the same way for our Reader Plugin, which i have also not implemented it till now,also did not get any sample for Reader Broker process.
    I did lot of search but i also didn find any.
    So what i am doing is,displaying a message box to user if the Reader Protected mode is enabled. And ask the user to Click on a button to disable Reader Protected mode. After restarting the PDF the user will be able to access MyPlugin without any error.
    As of now i am doing this, but i have to make MyPlugin to work even when the Protected Mode is enabled. For this i need to create the Broker Process.
    I know you have also spend lotz of your time to find a solution for this. But we are not getting the right ways to achieve a solution for this.
    If i get a solution for this i will definately inform you and if you get any solution please let me know.
    Thanks and Regards,
    Chetan.

  • XQuery works outside of Oracle JDeveloper but fails in JDev

    Hi,
    I created an XQuery script that transform an XML file. It works fine in XMLSpy and Stylus, but fails with error in Oracle JDev 10.1.3.1:
    XPST0008: It is a static error if an expression refers to an element name, attribute name, schema type name, namespace prefix, or variable name that is not defined in the static context, except within an ElementTest or an AttributeTest.
    Detail: invalid type 'xs:anyAtomicType'
    Does that mean Oracle JDev doesn't fully support XQuery 1.0?
    Thanks.

    Michelle,
    Can you post your code?
    Regards,
    Geoff

  • I have Just Got Flash Builder 4.5 but I wanted Flash Builder for PHP

    I have Just Got Flash Builder 4.5 and I wanted Flash Builder for PHP do I need to buy the the separate product (Flash Builder for PHP) or can I use the Flash Builder Professional 4.5 that I have just purchased?
    And If I can use the Flash Builder Professional 4.5 what do I need to add to it to get it to work with PHP?

    Trial mode expires prematurely
    http://helpx.adobe.com/x-productkb/global/trial-software-expired-early.html

Maybe you are looking for