Wsdl: The operation has no matching binding

I am trying to create the proxy class from the wsdl using .net wsdl tool.
But it gives me the following errors.
Error: Unable to import binding 'CPConfigBinding' from namespace 'http://xxxx'.
- The operation 'editCPConfig' on portType 'CPConfig' from namespace 'http://' had the following syntax error: The operation has no matching binding. Check if the operation, input and output names in the Binding section match with the corresponding names in the PortType section.
I have already check all the names many times. They are the same in the portType, binding and message. I have checked the internet for days without any solution.
Could someone please lend a helping hand!!
Thank you very much.

I would like to provide more information.
After some checking, I think this wsdl is Java based web services. I am unable to create classes successfully using the .Net wsdl tool. I dun know why?
Hope to get any help from here. Thanks alot!!
Have a good holiday!!

Similar Messages

The operation has timed out

Hello Forum,
I was running a report that was built on report builder at some point an error message of the operation has timed out will come up.
I have set the time out to 0 values and more than 600 seconds too.
On SQL the report ran within 6 minute.
Will be glad for quick response.
Thank you.
Disu Ridwan

Hi Disu,
I assumed that you open the report builder from the report manager or you have connectted to the report server.
As you have mentioned that set the timeout value of the dataset didn't work. Please reference to the similer thread below to set the other time out in the configuration file and so on:
Report Builder 2.0 / 3.0 errors out with 'The operation
has timed out' when previewing a report saved in Report Server takes more than 10 minutes
Steps to Resolve SSRS Timeout Issues
"The operation has timed out" when rendering a report
If you problem still exists, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

SQL2012: Internal Error: The operation terminated unsuccessfully. The connection timeout was exceeded. Server: The operation has been cancelled

When rendering a SSRS native mode report based on a query to SSAS the report with fail with the following error:
An error has occurred during report processing. (rsProcessingAborted) Cannot read the next data row for the dataset. (rsErrorReadingNextDataRow). The connection either timed out or was lost. Unable to read data from the transport connection:
An existing connection was forcibly closed by the remote host.
Putting a trace on the SSAS instance, I get an error:
Internal error: The operation terminated unsuccessfully. The connection timeout was exceeded. Server: The operation has been cancelled.
I've modified the IIS (6) application pool timeouts, the SSRS rsreportserver.config timeouts, and the SSAS timeouts. Restarted services, rebooted, and still I get this error.
The report will render if I select a shorter time period (less data, shorter query time).
Running SQL2012 (11.0.5058.0), SSAS and SSRS on separate servers, same subnet.
Any help or suggested troubleshooting greatly appreciated.

Please check the links below.
http://www.symantec.com/business/support/index?page=content&id=TECH186577
https://support.microsoft.com/kb/2200755?wa=wsignin1.0
http://msdn.microsoft.com/en-IN/library/ms155782.aspx
http://blogs.msdn.com/b/dynamicsaxbi/archive/2013/02/14/how-to-addressing-ssrs-session-timeouts.aspx

Collab CopyProjectMetaData - the operation has timed out

For the life of me, I can't get the CopyProjectMetaData to run w/o timing out. It'll work about 1 in 10 trys if that. I'm using CopyProjectContent on the same two projects successfully everytime. But CopyProjectMetaData is basically useless. Anyone?

Hi Disu,
I assumed that you open the report builder from the report manager or you have connectted to the report server.
As you have mentioned that set the timeout value of the dataset didn't work. Please reference to the similer thread below to set the other time out in the configuration file and so on:
Report Builder 2.0 / 3.0 errors out with 'The operation
has timed out' when previewing a report saved in Report Server takes more than 10 minutes
Steps to Resolve SSRS Timeout Issues
"The operation has timed out" when rendering a report
If you problem still exists, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Question about EWS - The operation has timed out

hi everyone,
I'm developing a solution which uses public folder database in Exchange Server to store tasks:
- We use 1 account to access to public folder database by using EWS.
- Currently, this public folder database contains 60000 tasks and they are being accessed by 700 users, they always have the following exception:
04/23/2015 09:41:15: - The request failed. The operation has timed out
Message :The request failed. The operation has timed out
Source :Microsoft.Exchange.WebServices
Stack Trace : at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.MultiResponseServiceRequest`1.Execute()
at Microsoft.Exchange.WebServices.Data.ExchangeService.FindItems[TItem](IEnumerable`1 parentFolderIds, SearchFilter searchFilter, String queryString, ViewBase view, Grouping groupBy, ServiceErrorHandling errorHandlingMode)
at Microsoft.Exchange.WebServices.Data.ExchangeService.FindItems(FolderId parentFolderId, SearchFilter searchFilter, ViewBase view, Grouping groupBy)
Please help.
Thanks a lot.
Phuc

Thanks Glen for your reply.
Here is a code block which retrieve the number of task of some groups
foreach (var bu in request.BusinessUnits)
SearchFilter businessUnitFilter = new SearchFilter.IsEqualTo(BusinessUnitAliasProp, bu);//, ContainmentMode.FullString, ComparisonMode.IgnoreCase);
SearchFilter[] filters = new SearchFilter[] { actualOwnerFilter, statusFilter, businessUnitFilter };
var filterCollection = new SearchFilter.SearchFilterCollection(LogicalOperator.And, filters);
GroupedFindItemsResults<Item> taskResults = this.exchangeService.FindItems(_publicFolderId, filterCollection, itemView, groupByApplication);
if (taskResults != null && taskResults.ItemGroups != null)
foreach (var groupItem in taskResults.ItemGroups)
if (!dict.ContainsKey(groupItem.GroupIndex))
dict.Add(groupItem.GroupIndex, new Dictionary<string, int>());
if (!dict[groupItem.GroupIndex].ContainsKey(bu))
dict[groupItem.GroupIndex].Add(bu, groupItem.Items.Count);
Please let me know if it's too complex and might affect to the performance of Exchange Server

Server: The operation has been cancelled

I went thru the related threads before creating this, it seemed to be a different problem.
I am getting below error on a particular cube, while running queries.. Below is one of them.. The same query on other cubes in the same server complete successfully... One peculiar thing though is im getting the result back as well as error...
Result in Result tab in SSMS, and Error in Messages tab... Can anyone please help...
select distinct measure_name from $SYSTEM.MDSCHEMA_MEASURES
Error...
Executing the query ...
Obtained object of type: Microsoft.AnalysisServices.AdomdClient.AdomdDataReader
Server: The operation has been cancelled.
Execution complete
Suman

Hi Suman,
For the error "Server: The operation has been cancelled", please refer to the links below to check if it works or not.
http://tablesinadb.blogspot.kr/2012/03/operation-has-been-cancelled-when.html
http://multidimensionalmayhem.wordpress.com/2011/10/08/an-informal-compendium-of-ssas-errors-part-4-ssas-object-design/
Besides, are there any detail error on the log? You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
If the issue persists, please provide us more information, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

'The operation has been cancelled due to restrictions in effect on this computer' prompts when firefox is started.

When I tried to open Firefox, it displayed a pop-up saying that 'The operation has been canceled due to the restrictions in effect on this computer. Please contact system administrator'. Even if I logged in as system administrator and tried to start Firefox, it showed me the same pop-up. The problem started from today morning. Yesterday, I was using Firefox and it worked for me. But for quite few days even though if I closed the window it was still running. Next time if I need to start Firefox, I need to close it from the Task manager and then need to start it. Not sure how to fix this problem. Now, I uninstall ed the older version (3.5.0 not sure) and updated with 3.6.3. Then also it shows me the same pop-up.
== This happened ==
Not sure how often
== Yesterday (04-May-2010)

By googling this site was found:
[http://techsalsa.com/solution-to-this-operation-has-been-cancelled-due-to-restrictions-in-effect-on-this-computer/]
You can try following solutions and see which one fix it for you.
Solution 1:
• Go to Control Panel -> Add Remove Programs, click on Set Program Access and Defaults.
• Open up the configuration whichever is selected and change the default web browser to something else.
Solution 2:
If you use older versions of IE then upgrade it to the latest one.
Solution 3:
Open registry editor, find
HKLM\SOFTWARE\Classes\htmlfile\shell\open\command
change its value to
"C:\\Program Files\\Internet Explorer\\IEXPLORE.EXE" -nohome
Solution 4:
• Open registry editor and search (Ctrl + F) for the value nocontrolpanel.
• Change its value from 1 to 0.
Do mention the solution that worked for you.

Cannot send mails to mail server. (The operation has timed out.)

I have configured database mail in sql server 2008 r2 on my local machine.
While testing I have observed that some of mails are not getting triggered.
Log file shows following message-
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 7 (2013-04-30T10:23:57).
Exception Message: Cannot send mails to mail server. (The operation has timed out.)
I have wriitten on SP for snding mails which sends 94 mail to different ail
address out of which only 35 are getting delivered.
Plz Assist me.

Hi Prashant Parit,
Please apply the latest SQL Server 2008 R2 Service Pack. And try to stop and restart SQL Server Agent.
See similar thread:
http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/6d3cd4ca-0a4e-4c84-bf1e-b8565c963c38.
Thanks.
Maggie Luo
TechNet Community Support

The operation has timed out default value too low - c# windows application

Hello,
I get the message that the operation has timed out when certain operations take too long, which would be any on our development/test server.
I either need to make an asychronous call which I will investigate or to find the code that sets this value to ten minutes.
Anybody know how to reset the value to ten minutes?
Thanks,
Stephanie

The timeout is occurring on the client so it not a particular error that's being returned by the server.
The default timeout with the EWS Managed API is 90 seconds and is set on the ExchangeService Object. You can set this to a higher value eg to set it to 5 minutes
server.timeout = 300000;
Why it fails ? if its overnight then Backups can be the cause eg if they are snapshotting the server or some other backup mechanism could mean the server is very busy for a time. Or any other number of specific environmental factors. This is really
a job for your Network admin to determine with server and network monitoring. I would suggest you check the EWS.Log on the Exchange server to see what happened at that time.
What you should do at a code level is handle the exception, I would suggest wait for 60 seconds after the exception (this will cater for most throttling issues) and then try the same request again. If it fails again after a pause then
you generally have a larger problem.
Cheers
Glen

ServiceRequestException : The request failed. The operation has timed out

I wrote simple client using EWS Managed API. And let it run for one night. It was working fine. But when I checked it back in the morning, I found my application stopped. I checked logs I got following exception:
2014-01-08 01:49:05.3649 | Error | Exception while fetching mails : The request failed. The operation has timed out | MyNamespace.MyClass.myMethod
Immediate Stack Trace
===================================================================================
Microsoft.Exchange.WebServices.Data.ServiceRequestException : The request failed. The operation has timed out
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.SimpleServiceRequestBase.InternalExecute()
at Microsoft.Exchange.WebServices.Data.MultiResponseServiceRequest`1.Execute()
at Microsoft.Exchange.WebServices.Data.ExchangeService.InternalLoadPropertiesForItems(IEnumerable`1 items, PropertySet propertySet, ServiceErrorHandling errorHandling)
at Microsoft.Exchange.WebServices.Data.ExchangeService.LoadPropertiesForItems(IEnumerable`1 items, PropertySet propertySet)
at MyNamespace.MyClass.myMethod() in c:\MyProject\MyClass.cs:line 190
Inner Exception 1 : Stack Trace
The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
Since the Exception message did not contain error code that Exchange server usually returns like (401) Unauthorized or (403) Forbidden, I am unable to pinpoint any reason for this to occur, since the functionality worked perfectly several times before
this exception occurred as I can check in my logs. Also my diagnostic class which runs on the occurrences of any exception immediately tried to ping exchange server and re-initialize ExchangeService object. When I checked diagnostics logs after this exception
time for the result of diagnostics, then it was able to ping the exchange server and the ExchageServer object also initialized successfully. So I am out of any reason now.
The exception occurred on the last line of the following code:
ItemView itemView = new ItemView(100, 0);
FindItemsResults<Item> itemResults = null;
PropertySet psPropSet = new PropertySet(BasePropertySet.IdOnly);
itemView.PropertySet = psPropSet;
PropertySet itItemPropSet = new PropertySet(BasePropertySet.IdOnly)
ItemSchema.Attachments,
ItemSchema.Subject,
ItemSchema.Importance,
ItemSchema.DateTimeReceived,
ItemSchema.DateTimeSent,
ItemSchema.ItemClass,
ItemSchema.Size,
ItemSchema.Sensitivity,
EmailMessageSchema.From,
EmailMessageSchema.CcRecipients,
EmailMessageSchema.ToRecipients,
ItemSchema.MimeContent
itemResults = service.FindItems(WellKnownFolderName.Inbox, itemView);
if (itemResults.Items.Count != 0)
service.LoadPropertiesForItems(itemResults.Items, itItemPropSet);
Any guesses why this could have happened? Or just some random network congestion? Am I forgetting to log some more information. Should I also log Exception.Data or something else?

The timeout is occurring on the client so it not a particular error that's being returned by the server.
The default timeout with the EWS Managed API is 90 seconds and is set on the ExchangeService Object. You can set this to a higher value eg to set it to 5 minutes
server.timeout = 300000;
Why it fails ? if its overnight then Backups can be the cause eg if they are snapshotting the server or some other backup mechanism could mean the server is very busy for a time. Or any other number of specific environmental factors. This is really
a job for your Network admin to determine with server and network monitoring. I would suggest you check the EWS.Log on the Exchange server to see what happened at that time.
What you should do at a code level is handle the exception, I would suggest wait for 60 seconds after the exception (this will cater for most throttling issues) and then try the same request again. If it fails again after a pause then
you generally have a larger problem.
Cheers
Glen

HT5678 Error message says "the operation has been cancelled (3072)." What's the fix?

I'm trying to install latest update from the App Store and each time I hit "install" I receive an error message: "The operation has been cancelled (3072)." Anybody know the fix?

Usually means another instance of the Application is running, likely in another user account. Either go to the other account(s) & close it, or restart the mac & try again.
Activity Monitor (Applications/Utilities/) when the filter is set to 'all processes', may show you Safari running somewhere.

Secure Store The Operation has Timed Out

Hi
When clicking the managed service application for secure store in SP 2010, we get 'The operation has timed out' error
Any ideas?

Check ULS log against Secure Store events. At first look, it seems to be database access/connection problem. But logs will say more.

License to perform the operation has expired

When I use Coherence within Resin, I get the following error:
Tangosol License: Unable to use the following licenses:
Tangosol Coherence(tm): Enterprise Edition (The necessary license to perform the operation has expired.)
Tangosol Coherence(tm): Clustered Edition (The necessary license to perform the operation has expired.)
Tangosol XML Framework (The necessary license to perform the operation has expired.)
Tangosol Cluster Service (The necessary license to perform the operation has expired.)
Tangosol Java Assembler (The necessary license to perform the operation has expired.)
I do not get this error, if I use Coherence in a regular standalone java application. What is the problem here?

Hi Bulut,
Please check the Resin classpath and web application WEB-INF/lib - most likely you have an old tangosol.jar somewhere.
Regards,
Dimitri

Internet Explorer will not allow me to download Mozilla Firefox on my computer. Its say the operation has timed out and I can't figure out why...

I have tried saving it to a jump drive and it still will not work. It also does not let me save the file anyhwere else on my hard drive. What is the problem?

Sadly there are some 'bad carriers' out there. If you have a VERY long download(and iPad OS updates can be 100s of megabytes) and the carrier has an interruption in service(router reboots, modem disconnects, etc) iTunes will timeout.
You might want to try updating later in the evening when usage starts to drop off(kids go to bed, people start watching cable instead of Netflix/Hulu) or early in the morning.
The other alternative is to update at a friend's place who might have a better carrier or is on a better subnet

Unable to Validate a Cluster Configuration. The operation has failed. The action validate a configuration did not complete .

There is an error in XML document (5, 73).
Attempt by method
Microsoft.Xml.Serialzation.GeneratedAssembly.XmlSerialzationReaderClusterPrep.Config.Read4_As...Bolean) to access method
MS.Internal.ServerClusters.Validation.TestAssemblyCollection.Add(MS.Internal.ServerClusters.V....Failed

Resolution:
1.) Copy the 2 Config Files attached to $PSHome (typically C:\Windows\System32\WindowsPowerShell\v1.0) – Done !
2.) Copy powershell.exe to PS.exe and create a config file
- cd $PSHome (which is the path where the powershell binaries live)
- copy powershell.exe PS.exe
- create a config file PS.exe.config with the content below
Now you have the possibility to open a “normal” PS 4.0 Window and run the following command:
ps.exe –command “Test-Cluster –li”
You can run this command from a powershell script as well.
This way you don´t touch your existing PS4.0 environment and don´t need to do extra testing of all scripts, but can run the Test-Cluster cmd-let on the clusters as expected.
More information:
Powershell.exe.config will be read, if a Powershell Window is opened.
Powershell_ise.exe.config will be read if the „Integrated Scripting Environment“ Powershell_ise.exe is opened.
The Content of the Config Files is as follows and can be edited with notepad
<?xml
version="1.0"
encoding="utf-8" ?>
<configuration>
<system.xml.serialization>
<xmlSerializer
useLegacySerializerGeneration="true"/>
</system.xml.serialization>
</configuration>
In the config file powershell is advised to execute the legacy serialization code as it has been done in Powershell 2.0.
If you set the value of the variable <xmlSerializer
useLegacySerializerGeneration="false"/>
to false,
powershell 4.0 would behave as if you would not have created a config file.

Wsdl: The operation has no matching binding

Similar Messages

Maybe you are looking for