WSDL version used for port creation in SOAMANAGER for Netweaver 7.01 SP-5.

Hi,
Does SOAMANAGER refer to a particular version of WSDL while creating the logical ports for consumer proxies. I'm asking this because after one of the upgrades in our ECC system we find that the authentication configurations of the port are automatically done based on the WSDL now, however this was not the case earlier.
Also logical ports created manually are giving runtime exception (Soap FAult Code : 1). Does logical ports creation necessarily have to be done from WSDL.
Please throw some light on the above, if any of you have faced this issue already.
Regards,
Avishek.

We got a reply from SAP that from NetWeaver 7.0 SP3, logical ports will be created based on Security policy mentioned in WSDL. We can however override this by creating the port manually and the SOAP fault code error can be resolved by manually entering the SOAP Action for each method of the Service in the 'Operation Specific' tab of the Logical Port details.

Similar Messages

Any BAPI available for mass creation/change/delete for dependency net

Hi guys,
Any BAPI available for mass creation/change/delete for constraints in dependency net. I mean any uploading option in mass for creation, change and delete.
Regds
Regds

Hi,
Check if the below FM's meet your need:
CAMA_CNET_CONSTRAINT_MAINTAIN
CAMA_CONSTRAINT_NET_MAINTAIN
CAMA_DEPENDENCY_MAINTAIN
Regards,
Vivek

How to use sdxc port as extra drive for photo storage

want to use sdxc card to supplement internal drive to store and use with photoshop.
is this possible. new mac user, excuse lack of knowledge.
jerry torre

Judging from my experience, you can use an sdxc card as a drive, but it may seem incredibly slow. I formatted one to be Mac OS journaled and cloned my entire boot partition onto it using Carbon Copy Cloner - worked, but it took 6 hours!

Is 3rd party software required for auto creation of DIR for scanned copy,

Hello SAP gurus.
The current business process is there are 100s of service order, (IW31 creation TC) and each service order has its own 50-60 external documents attached to it.
unfortunately there is no standard link from SAP DMS at Service order (lW31, TC) level.
Here i tought of creating a document folder in EDMS or structure with the reference of service order No. And keeping this service order as reference we need some 50-60 documents (files) to be directly assigned to the main service order No, with out any manual intervention.
Here is what the user does in the present system
With our client in the present system they use a 3rd party software for mail and scanner interface, here Any x, y, z user scans an document or Mails a document with attachments, just giving the subject line as the Service order already created.
The document attachment directly comes and sits inside the predefined Service Order folder. Along with the user name who sent the document and the time he sent the document.
Is the same thing possible in SAP ie.. Creating or attaching documents with out any manual interventions taking the reference of Mails sent having the subject line as the DIR
Does this require 3rd party interference to do this, will any BAPI /BADI to do this for DMS with out 3rd party software.
is there any upload programme that should be used which will avoid 3rd party software.
please explain. points waiting.
Thanks and warm regards
Priya S
Edited by: Priya S on Mar 16, 2009 4:32 PM

Hi Priya
Creation of New Object link is not so hard job.If any expert ABAP Consulatnt is available he can do in a week.But It all depend on his understanding of functionality clearly and quicky.
For developement of new object link check this link.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b2/c043a66fab11d1949500a0c92f024a/content.htm
They work fine if you develope it as per procedure in above link.You just need good ABAP'er.
If you are trying upload Proggramme to upload the files daily basis from folder you can do this .
Just create folder on desktop put some docuemnts and run BDC to upload the document to DIR.I had tried once. Get help of Good ABAP'er to do your job.
If any help please get back.
With regards
Mangesh Pande

System status for IDOC creation and processing for production orders

All
I am creating IDOCs for production orders to send requirements to an external WM system for kitting execution.
I need to know whether there are any system statuses to notify me when an IDOC has been created,failed and processed. If not, how do I go about creating user defined statuses for these statuses.
Second question, which idocs should I use to confirm, teco and cancel the production orders from an external system?
Thanks
Evan

HI Evan
u can use the standard program - RBDMOIND scheduled in back ground to update the Idoc staus ,
this helps to update the IDoc Status from
'03 Data passed to port OK ' to
'12 Dispatch OK'
status 03 indicates the IDoc is successfully transmitted to Communication Layer and the Status 12 helps to confirm the data dispatch to the receiving port.

System status or user status for IDOC creation and processing for prod ord

All
I am creating IDOCs for production orders to send requirements to an external WM system for kitting execution.
I need to know whether there are any system statuses to notify me when an IDOC has been created,failed and processed. If not, how do I go about creating user defined statuses for these statuses.
Second question, which idocs should I use to confirm, teco and cancel the production orders from an external system?
Thanks
Evan

For the first part of your query refer to the technical forums.
For the second part - refer to Idoc - LOIPRO01, it has a segment for Order status, that should be of interest.
Attn Moderators
I think it would be better to move this thread to a technical forum, so the requester can get the most relevant information.

Use of Digium 24-port FXO analog cards for FreePBX system

Does anyone have experience with the installation of Digium 1AEX2400 Series cards in a FreePBX distro? I am researching a new system and want to see if anyone has successfully used this hardware before, and if there was any trouble installing the hardware that I should know about. It would probably be installed in a Dell R310 1U server.
I have used 8-port Digium FXO cards for many years now. And yet I find very little on discussion groups for either the 8-port cards or their 24-port equivalent.
Any information would be helpful.
This topic first appeared in the Spiceworks Community

Right now I can get a 570 for 175 bucks... R4yMoNd. When I look at the 570 in comparison to what I have it doesnt look as though itis going to make too much difference. http://www.hwcompare.com/9048/geforce-gtx-570-vs-radeon-hd-5870/ I'm sure however the CUDA cores will speed it right up. I'm no good when it comes to all that so thanks to both you for the help. I have tracked down a 670 in stock (seems tough) for $440 then I need a 700 w power supply for about 70. If the 570 should take care of the problems listed above thats what I'm going for.. Just wasnt sure if it would make the needed difference

Why are ports 36000-36999 needed for iChat AV

I have a homegrown firewall on my network that allows me to do whatever I wish.
When testing this with a ichat AV 4 user, I had to open the following ports to make it work:
${fwcmd} add pass udp from any to any 36000-36999
${fwcmd} add pass udp from any 36000-36999 to any
Once that was done, the video/audio worked fine. I had already punched the other recommended holes:
${fwcmd} add pass tcp from any 5190 to any 1024-65535
${fwcmd} add pass tcp from any 5298 to any 1024-65535
${fwcmd} add pass tcp from any 1024-65535 to any 5190
${fwcmd} add pass tcp from any 1024-65535 to any 5298
${fwcmd} add pass udp from any 5060-5061 to any 1024-65535
${fwcmd} add pass udp from any 5190 to any 1024-65535
${fwcmd} add pass udp from any 5297-5298 to any 1024-65535
${fwcmd} add pass udp from any 5353 to any 1024-65535
${fwcmd} add pass udp from any 5678 to any 1024-65535
${fwcmd} add pass udp from any 16384-16403 to any 1024-65535
Why were the 36000 ports needed?
Also, when testing with an iChat 3 user, I couldn't initiate the call, but they could and it worked...
One more thing I should add is that I tested the ichat4 to the appleu3test02 aim user and it worked without punching the 36000 holes.
Any clues would be very helpful.
Thanks,
Micky

Ok,
I will tell you which ports iChat 4 uses.
You can then decide how to enter them into your set up.
5190 on TCP for AIM Login. An alternative we suggest is 443
This can be SSL on either port for iChat 4
5190 on UDP for File Sending, Pic in Text chats (Direct chats) and Group chats.
5222 and or 5223 on TCP for Jabber login depending on your Server
5220 for Jabber on TCP (rest of their port use)
5297, 5298, 5353 on UDP for Bonjour
5298 on TCP for Bonjour
5678 on UDP for sending and receiving Visible part of A/V invite
Ports 16393-16402 on UDP for the SIP connection phase with the SNATMAP server AND the A/V chat it self. Use one port at a time for all of this (Different from iChat 3) Starts at port 16402 and move down one port at a time for those 10 ports then tries random port.
5900 TCP for Screen Sharing (Unsecure connections) VNC.
See this Doc for some info
http://docs.info.apple.com/article.html?artnum=93208
This for some of the iChat 4 Changes
http://docs.info.apple.com/article.html?artnum=306688
This for the VNC bit and confirmation on Port Use and the use of Jabber on some server 5553 in Note 10
http://docs.info.apple.com/article.html?artnum=106439
What happens sometimes is that if the other end is doing Port Forwarding, DMZ or Port Triggering with NAT happening in two or more devices then the ports get changed.
You see this is some Error 8 logs. This in fact itself goes back to info that appeared in the Error log drop down in iChat 2 (And 3 before 10.4.7) that gave you some of the info about how the call was progressing when it failed.
Doing NAT behind tow or more routing devices can be the problem. It is even worse when people have two DHCP server further complicating the issue.
I am not sure why you have not pointed them port for port.
(I know the Apple Doc does says in it's table that this is an option.)
Most domestic devices via a web browser set up, work fine pointing 5190 at 5190 for example. iChat data is then expected on an iChat port and pointed to an iChat port on your computer.
Realistically a firewall should work the same way.
10:23 PM Wednesday; November 14, 2007

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

In a future version of ibook author would be very useful to provide for the creation of shared content online. Teachers can collaborate on the creation of a text. Very useful for teachers to collaborate in the network. sharing sharing sharing

in a future version of ibook author would be very useful to provide for the creation of shared content online.
Teachers can collaborate on the creation of a text. Very useful for teachers to collaborate in the network. sharing sharing sharing

As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html

Error in Logical port for Consumer proxy in SOAMANAGER

HI Experts,
While creating Logical port for Consumer proxy in SOAMANAGER I am facing problem
"SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL ".
Kindly suggest.

Hi Milan,
this kind of error occurs when there is no service and end point description in the WSDL of provider who's service you are trying to consume using Consumer Proxy.
Just open the provider's WSDL URL that you have given while creating Logical port for the consumer proxy and check if service and end point exists there.
Thanks
Sunil Singh

Can you no longer have a background color for the text box in the new version of hp photo creations

just updated to the new version of HP Photo Creations, used to be able to have a colored background for the text box - is that no longer possible in this new (not better) version????!!!!! Uuuuuuuuuugh

Hi Lainey.
Thanks for asking. We're working on bringing back that feature. In the meantime, here's another way to add text backgrounds: Add a placeable graphic and then click the Arrange button to send it to the back, behind the text.
That approach also gives you more interesting shapes. The new alignment guides make it a snap to align a graphic with a text box. In the example below (it may take a day for the image to show up here), I also used the new Premium Editing Features to change the color of the graphic.
P.S. — Applying a thick border to an empty text box (also using the Premium Editing Features) is another way to create a background shape. That has the advantage of letting you pick any color for the box. You'll also find several new text styles at the bottom of the new text menu.
Let us know if we can help further,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Valid size not available for this creation when using Greeting Card feature

Using PSE9 with a Mac. When attempting to create a greeting card, after selecting the photo, the Greeting Card, I receive a pop up error message as follows:
"Valid Size Not Available For This Creation". (All other Create functions such as Photo Book, Photo Calendar, and Photo Collage appear to be working). I have been in contact with Adobe Support and have been instructed to do a number of things from creating a new preferences file to uninstalling and re-installing the PSE software, with no result. Has anyone else run into this problem, and if so have found a fix? Thanks.

I've been tearing my hair out over this one also. I've been on hold for over 10 hrs with Adobe Support waited over almost 2 weeks and still no resolution. I'm trying to create the Save the Date cards for my wedding and I can't wait for Adobe. Removing the preferences file and uninstalling/reinstalling does not fix the problem.
That said I did figure out a workaround for this. It's easy but it does require Windows. For me this was no big deal as I do own a Windows box.
Get the free trial version of PE9 for Windows and install it. If you don't have a Windows computer get to a friend that has one
Upload some of your photos to the PE9 Windows Organizer (it's identical to the mac version)
Select Create and then Greeting card. Photoshop will launch the guided edit feature for greeting cards.
Select the Layout feature and once you find out that you like save it as Photoshop project. Repeat this step for as many layouts as necessary.
Copy your Photoshop project files (and any folders) to your mac.
Open the project files as you would with any other Photoshop file.
You can now select the Create feature. You will be able add your pictures and resize them, you will be able to add/remove text, you'll be able to change the backgound/borders, add graphics...pretty much anything...EXCEPT automatically modify the layout. If you click on Layout, PE9 returns nothing. You can however go into full edit mode and if you have decent Photoshop skills you can make any changes to the layout manually.
If I had to put money on this I'd say that there is a problem with the PE9 Mac installation package. For some reason it is not deploying the layout data/files or it is not putting them in the right place. For this reason the program can't find the layouts when the user selects the greeting card guided edit.
Good luck.

Has anyone used reMIDI as a plug-in for GarageBand. I downloaded a trial version of reMIDI, which enables MIDI instruments to be strummed or arpegiated, but can't get it to work in Garageband. How do I set it up?

Has anyone used reMIDI as a plug-in for Garageband ('08)? The program allows MIDI instruments to be strummed or arpegiated. I have a trial version, but can't get it to work in Garageband. Wonder how to set it up.
Thanks, Doctor Mark

Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course.

How to use XDOXSLT in rtf template layout for etext template creation

<DEFINE CONCATENATION>     BookDetails
<BASE LEVEL>     Category
<ELEMENT> Name || '/' || Price
<DELIMITER>      '/'
<END DEFINE CONCATENATION>     BookDetails
With EFTProcessor the above details are created in xsl file as follows
<xsl:template name="CONCAT_BookDetails">
*I need to declare one more variable here
EG: <xsl:value-of select="xdoxslt:set_variable($mycount, count(.//Category))"/>
--and use this variable for any dyanamic process inside this template. How to achieve this in rtf template by declaring a xdoxslt function. How to declare this
syntax in rtf layout so that it creates a varibale in xsl template using the EFTProcessor. Please help me out. The main point here is to include xslt functions in
rtf template layout for etext template creation.*
<xsl:for-each select=".//Category">
<xsl:call-template name="CONCAT_BookDetails_V"/>
</xsl:for-each>
</xsl:template>

in the next time use BI Publisher forum - BI Publisher
<?format-number(ENTERED_CR,'##,##0.00')?>it's works for me
output:
444    -> 444.00
444.55 -> 444.55

WSDL version used for port creation in SOAMANAGER for Netweaver 7.01 SP-5.

Similar Messages

Maybe you are looking for