WSFC - Active/Active Backup issue
Hello,
I'm trying to setup a backup and looking for a right way to do that for Clustered Server.
I have two nodes with failover Cluster on High Availability setup. before that we used only one node so what I did is doing the full backup on the weekend and differential during the week ( twice per day ). How should I approach the setup
for two nodes ? Do I need to do fully backup on witch node on nightly basis , and overwrite or there is a better way ? (I want to keep at least 2 entry points during the day of the DB's ) .
Thanks
When you say active/active you have 2 different SQL instance running on nodes. I am not clear how you are relating this with backup. Backups completely depends on your business requirements.
http://www.xtivia.com/questions-ask-planning-sql-server-backup-strategy/
Similar Messages
-
Apple iPad 6.1.2 10B147 - Active Sync Issues Remain
Hi,
Please correct me ASAP if I am posting this in the wrong area of the discussion forum.
I have a batch of Apple iPad devices that are now connecting to our Exchange 2003 system using Apple iPad iOS 6.1.2 10B147 devices. It would seem that these devices may have the 6.1 Active Sync issue again even though this version was meant to fix the issue.
A couple of users have reported this morning reoccuring calender cancellations, we have also had excessive log growth on Exchange 2007 platform.
Here is the reported "Device Agent" from Active Sync logs:
Apple-iPad3C6/1002.147
Apple-iPad2C7/1002.147
Apple-iPad2C7/1002.147
Apple-iPad3C6/1002.147
Apple-iPad2C7/1002.147
Apple-iPad3C6/1002.147
Here is the reported Device iOS
DeviceOS
iOS 6.1.2 10B147
Does anyone know if Apple has this as a reported bug yet on their fixed version? If not is there an official Apple bug submission process that should be followed?
Regards
Ben PaddickHi waddock,
I think that for the most part, iOS 6.1.2 resolved the recurring calendar bug and the significant battery drain issues. With that said, I have had a couple cases of devices still experiencing the battery drain but not the calendar bug. Quick fix is to remove the Exchange mailbox(es) from the device and re-add it. If there are any existing accounts that use Exchange ActiveSync (I think Hotmail and legacy GoogleSync), I just remove and add them back to just in case.
I suggest checking here for periodic updates on what's going on with EAS (Exchange ActiveSync) and 3rd party devices like Apple:
http://support.microsoft.com/kb/2563324
I assume you're an on-premise environment, so to mitigate short-term, you may want to think about blocking certain devices on certain operating systems using your Device Access Settings in Exchange for mobile devices.
For feedback for Apple, you can do it a couple ways. This is the internet facing site:
http://www.apple.com/feedback/
Or you can create an Apple Developer account (or Apple IT program if you have an enterprise agreement with them) and start submitting feedback during your testing (i.e. beta versions of iOS):
https://developer.apple.com/
Hopefully this helps! -
Hi,
I encountered SAP HR Active Sync issue: The IDM seems can't receive the IDOC but SAP side says the data already passed to port OK.
I enabled the verbose mode of the Active Sync logs and it is repeating:
2009-06-04T17:07:08.750+0800: IDOCs of message type HRMD_A will be processed.
2009-06-04T17:07:08.750+0800: {jco.server.gwhost=10.153.3.20, jco.server.progid=IDMRFC, jco.server.gwserv=sapgw01, jco.server.trace=1, jco.server.unicode=1}
2009-06-04T17:07:08.750+0800: Started IDocServer (IDMRFC)
2009-06-04T17:07:08.750+0800: Done initializing SAPHRActiveSync resource adapter.
2009-06-04T17:07:08.750+0800: SARunner: loop 0
2009-06-04T17:07:08.812+0800: Started, paused until Thu Jun 04 17:07:08 GMT+08:00 2009
2009-06-04T17:07:13.812+0800: Pause completed
2009-06-04T17:07:13.843+0800: Polling
2009-06-04T17:07:13.843+0800: Poll complete.
2009-06-04T17:07:13.843+0800: SARunner: loop 1
SAP side transaction WE02 shows the IDOC:
IDoc sent to SAP system or external program: Data passed to port OK
SAP HR Active Sync resource reference says:
1. Enter transaction code PFAL.
2. Insert the Object Type P for person objects.
3. Enter an Employee's ID for the Object ID or select a range of employees.
4. Click Execute.
5. Ensure that the status is set to passed to port okay.
6. The IDoc has been created. Check the Active Sync adapter log file to verify that
an update was received.
Now why I can't see the IDOC logs in the active sync adaptor log file?
Thanks!Hi Wushilin,
Did you ever find a solution to this?
Thanks -
http://clerccenter.gallaudet.edu/temp/various-flash-tests/flash-fix-test.html
hi - go to the above. i followed the instructions and info
from other postings and am able to get an HTML page generated by
Flash to take care of that IE browser active content problem.
http://clerccenter.gallaudet.edu/temp/various-flash-tests/fix-embedded.html
then go to the above link. this is the SWF file placed onto a
blank HTML page with Dreamweaver. Obviously, the active content fix
does not work now. so my question is how do i get this to work when
i want to place flash content on my page through using DW?
I read somewhere that i may need to link up the JS file. can
someone help me with that? PS - i'm not good with writing JS code.
thanks.Deaf Mike,
> I read somewhere that i may need to link up the JS file.
can
> someone help me with that? PS - i'm not good with
writing
> JS code.
The IE Active Content issue is a pretty popular one lately,
as you can
imagine. The easiest, most convenient solution I know of is
to use a tiny
JavaScript application called FlashObject. -- Scratch that. I
just learned
that the developer felt compelled by Adobe to change the name
of his free
product to SWFObject. (Sigh.) Okay, so it's SWFObject, then.
And a
beautiful piece of code it is. Give it a shot, Mike. Very
easy to use.
But if you have questions, write back.
http://blog.deconcept.com/swfobject/
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design." -
Licence for backup ASA5525 in an active/backup concept
Hi!
In my current concept I have a ASA5525 with multiple contexts which is licensed for 20 security contexts.
Now I want to add a second firewall to create an active/backup szenario.
Does the backup firewall also need a license for 20 security contexts or is there a way to run this scenario with the basic license for 2 contexts?
Best Regards,
StefanHi,
To my understanding, starting from 8.3 software the ASA Failover pair devices wont require identical Licenses. Considering your ASA model, you will be running atleast software version 8.6.
With regards to Security Context Licenses to my understanding the Context Licenses on both units are counter together.
So you should have 20 + 2 Security Context available with the 2 ASAs Failover pair (one having the separate license and other with default license with regards to Security Context)
Have a look at this document
http://www.cisco.com/en/US/docs/security/asa/asa84/license/license_management/license_86.html#wp1353724
- Jouni -
Exchange 2010 SP3 rollup4
4 Server DAG all servers running Windows 2008 R2 (VMs on VMware esxi5.1) 4 databases (2 mailbox, 2 online archives)
Last week 2 databases backup stopped truncating the logs, Mailbox 1 and Online Archive 1. (Mailbox 2 and Online Archive 2 seem to be OK and are backing up OK)
On investigation there are a number of errors in the application log:
Log Name:
Application
Source:
MSExchangeRepl
Date:
05/06/2014 21:50:48
Event ID:
2156
Task Category: Service
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
The log copier for database 'Online Archive 1' could not send a log file to server 'EXCHANGESERVER2' because An I/O error occurred while attempting to access file 'L:\Exchange Logs\Online
Archive 1\E05.log' on source server EXCHANGESERVER1. Error: File not found (-1811)
Event Xml:
<Data>An I/O error occurred while attempting to access file 'L:\Exchange Logs\Online Archive 1\E05.log' on source server EXCHANGESERVER1. Error: File not found (-1811)</Data>
Log Name:
Application
Source:
MSExchange Search Indexer
Date:
05/06/2014 21:50:48
Event ID:
118
Task Category: General
Level:
Warning
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
Exchange Search Indexer has temporarily disabled indexing of the mailbox database Online Archive 1 (GUID = ee385d93-918f-470e-b57b-a87d7e23ed20) due to an error (Microsoft.Mapi.MapiExceptionMdbOffline:
MapiExceptionMdbOffline: Unable to read events. (hr=0x80004005, ec=1142)
Diagnostic context:
Lid: 33865
Lid: 1494 ---- Remote Context Beg ----
Lid: 44215
Lid: 60049 StoreEc: 0x8004010F
Lid: 49469
Lid: 65341 StoreEc: 0x8004010F
Lid: 56125
Lid: 47933 StoreEc: 0x8004010F
Lid: 32829
Lid: 49213 StoreEc: 0x8004010F
Lid: 48573
Lid: 64957 StoreEc: 0x8004010F
Lid: 20057 StoreEc: 0x476
Lid: 1750 ---- Remote Context End ----
Lid: 28777 StoreEc: 0x476
Lid: 20098
Lid: 20585 StoreEc: 0x476
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiEventManager.ReadEvents(Int64 startCounter, Int32 eventCountWanted, Int32 eventCountToCheck, Restriction filter, ReadEventsFlags flags, Boolean includeSid, Int64& endCounter)
at Microsoft.Exchange.Search.RetriableOperations.ReadEvents(ThreadLocalCrawlData unused1, MapiEventManager eventManager, Int64 watermark, Int32 eventCount, Int64& endCounter)
at Microsoft.Exchange.Search.RetriableOperations.DoRetriableMapiOperation[SourceType,ReturnType,Parameter1Type,Parameter2Type,Parameter3Type](ThreadLocalCrawlData crawlData, SourceType source, Parameter1Type parameter1, Parameter2Type parameter2, Parameter3Type&
parameter3, MapiOperationDelegate`5 operationDelegate)
at Microsoft.Exchange.Search.NotificationWatcher.GetMapiEvents(Int32 maxEvents, NotificationQueue notificationQueue, Int64& endCount)
at Microsoft.Exchange.Search.NotificationWatcher.NotificationWatcherThread()), and Operations Manager would never alert it.
Log Name:
Application
Source:
MSExchangeRepl
Date:
05/06/2014 21:50:52
Event ID:
4082
Task Category: Service
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
The replication network manager encountered an error while monitoring events. Error: Microsoft.Exchange.Cluster.Replay.AmClusterApiException: An Active Manager operation failed. Error
An error occurred while attempting a cluster operation. Error: Cluster API '"OpenCluster(Exchangeserver1) failed with 0x6d9. Error: There are no more endpoints available from the endpoint mapper"' failed.. ---> System.ComponentModel.Win32Exception:
There are no more endpoints available from the endpoint mapper
--- End of inner exception stack trace ---
at Microsoft.Exchange.Cluster.Replay.NetworkManager.DriveMapRefresh()
at Microsoft.Exchange.Cluster.Replay.NetworkManager.TryDriveMapRefresh()
Event Xml:
Log Name:
Application
Source:
ESE
Date:
05/06/2014 21:51:15
Event ID:
489
Task Category: General
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
msexchangerepl (2448) An attempt to open the file "O:\Mailbox Databases\Online Archive 1\Online Archive 1.edb" for read only access failed with system error 32 (0x00000020):
"The process cannot access the file because it is being used by another process. ".
The open file operation will fail with error -1032 (0xfffffbf8).
For more information, click http://www.microsoft.com/contentredirect.asp.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="ESE" />
<EventID Qualifiers="0">489</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-05T20:51:15.000000000Z" />
<EventRecordID>7392312</EventRecordID>
<Channel>Application</Channel>
<Computer>Exchangeserver1</Computer>
<Security />
</System>
<EventData>
<Data>msexchangerepl</Data>
<Data>2448</Data>
<Data>
</Data>
<Data>O:\Mailbox Databases\Online Archive 1\Online Archive 1.edb</Data>
<Data>-1032 (0xfffffbf8)</Data>
<Data>32 (0x00000020)</Data>
<Data>The process cannot access the file because it is being used by another process. </Data>
</EventData>
</Event>
Log Name:
Application
Source:
MSExchangeRepl
Date:
05/06/2014 21:51:15
Event ID:
4107
Task Category: Service
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
The Microsoft Exchange Replication service detected that database 'Online Archive 1' may be mounted on two servers. The copy on server 'EXCHANGESERVER1' will now be dismounted. Please
review the event logs for more information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">4107</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-05T20:51:15.000000000Z" />
<EventRecordID>7392314</EventRecordID>
<Channel>Application</Channel>
<Computer>Exchangeserver1</Computer>
<Security />
</System>
<EventData>
<Data>Online Archive 1</Data>
<Data>EXCHANGESERVER1</Data>
</EventData>
</Event>
Log Name:
Application
Source:
MSExchangeRepl
Date:
05/06/2014 21:51:15
Event ID:
2070
Task Category: Service
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
The Microsoft Exchange Replication service encountered an error while inspecting the logs and database for Online Archive 1\EXCHANGESERVER1 on startup. Error: File check failed : File
'O:\Mailbox Databases\Online Archive 1\Online Archive 1.edb' could not be opened.
The file is locked or in use.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">2070</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-05T20:51:15.000000000Z" />
<EventRecordID>7392315</EventRecordID>
<Channel>Application</Channel>
<Computer>Exchangeserver1</Computer>
<Security />
</System>
<EventData>
<Data>Online Archive 1\EXCHANGESERVER1</Data>
<Data>File check failed : File 'O:\Mailbox Databases\Online Archive 1\Online Archive 1.edb' could not be opened.
The file is locked or in use.</Data>
</EventData>
</Event>
Log Name:
Application
Source:
ESE
Date:
05/06/2014 21:51:45
Event ID:
489
Task Category: General
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
msexchangerepl (2448) An attempt to open the file "O:\Mailbox Databases\Online Archive 1\Online Archive 1.edb" for read only access failed with system error 32 (0x00000020):
"The process cannot access the file because it is being used by another process. ".
The open file operation will fail with error -1032 (0xfffffbf8).
For more information, click http://www.microsoft.com/contentredirect.asp.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="ESE" />
<EventID Qualifiers="0">489</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-05T20:51:45.000000000Z" />
<EventRecordID>7392316</EventRecordID>
<Channel>Application</Channel>
<Computer>Exchangeserver1</Computer>
<Security />
</System>
<EventData>
<Data>msexchangerepl</Data>
<Data>2448</Data>
<Data>
</Data>
<Data>O:\Mailbox Databases\Online Archive 1\Online Archive 1.edb</Data>
<Data>-1032 (0xfffffbf8)</Data>
<Data>32 (0x00000020)</Data>
<Data>The process cannot access the file because it is being used by another process. </Data>
</EventData>
</Event>
Log Name:
Application
Source:
MSExchange Search Indexer
Date:
05/06/2014 21:51:50
Event ID:
108
Task Category: General
Level:
Information
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
Exchange Search Indexer has enabled indexing for the Mailbox Database Online Archive 1 (GUID = ee385d93-918f-470e-b57b-a87d7e23ed20).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange Search Indexer" />
<EventID Qualifiers="16388">108</EventID>
<Level>4</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-05T20:51:50.000000000Z" />
<EventRecordID>7392320</EventRecordID>
<Channel>Application</Channel>
<Computer>Exchangeserver1</Computer>
<Security />
</System>
<EventData>
<Data>Online Archive 1</Data>
<Data>ee385d93-918f-470e-b57b-a87d7e23ed20</Data>
</EventData>
</Event>
Log Name:
Application
Source:
ExchangeStoreDB
Date:
05/06/2014 21:52:00
Event ID:
124
Task Category: Database recovery
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
At '05/06/2014 21:51:15' the Exchange Information Store Database 'Online Archive 1' copy on this server encountered an error. Consult the event log on the server for other "ExchangeStoreDb"
or "msexchangeRepl" events that may identify the specific failure. The Replication Service will automatically attempt to retry.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="ExchangeStoreDB" />
<EventID Qualifiers="49156">124</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-05T20:52:00.000000000Z" />
<EventRecordID>7392327</EventRecordID>
<Channel>Application</Channel>
<Computer>Exchangeserver1</Computer>
<Security />
</System>
<EventData>
<Data>Online Archive 1</Data>
<Data>ee385d93-918f-470e-b57b-a87d7e23ed20</Data>
<Data>Replay</Data>
<Data>AlertOnly</Data>
<Data>Online Archive 1</Data>
<Data>
</Data>
<Data>
</Data>
<Data>05/06/2014 21:51:15</Data>
</EventData>
</Event>
These seem to repeat until a log entry:
Log Name:
Application
Source:
MSExchangeIS
Date:
05/06/2014 22:14:38
Event ID:
9617
Task Category: Exchange VSS Writer
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
Exchange VSS Writer (instance ae29b16e-11b9-4f2d-b2eb-a544d0927d87:2) failed with error code -2147221233 when processing the backup completion event.
I thought it was a backup issue but Veeam have investigated and have said it is a VSS timeout issue (I'm not convinced)
Recently I have had to have a new logs drive and extend the size of the mail box drive but since those changes were made backup has run OK until this issues.
Any advice appreciated.Hi,
Based on my research, when Veeam takes the snapshot to then do a VSS backup it will cause the databases in the DAG to fail over and cause lots of alerts and we can modify the REM for the backup issue:
http://desktopfeedbag.com/2012/02/23/fixed-exchange-2010-sp1sp2-dag-fail-over-with-veeam/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Thanks,
Angela Shi
TechNet Community Support -
Hi-
Looked thru the thread related to my questions and found nothing that applies yet.
Example:
http://social.technet.microsoft.com/Forums/en-US/4e4472b9-8e6f-4fdc-a287-1cc8c0f6de09/windows-2008-r2-backup-fails-with-event-521-error-code-2155348001?forum=windowsbackup
http://social.technet.microsoft.com/Forums/en-US/e8c910f7-f0dd-4613-beae-b98894fb6f23/windows-server-2008-std-backup-fails-constantly-with-error-code-2155348001?forum=windowsbackup
Here are details of the issues....
Backup - OS error - system image:
External disk - USB
Mon - Fri @ 6PM.
Windows SystemState
OS(C:)
Last backup failure...
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
[Critical error WINIMAGE_UNABLE_VSS] Unable to create VSS snapshot
- Additional information: Refer to the log for more details
- Troubleshooting link:
http://kb.backupassist.com/errormap.php?BA2512
The backup operation stopped before completing.
Detailed error: ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try this operation again.
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-12-08-2014_04-41-00.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-12-08-2014_04-41-00.log
NOTE:
The errors logs are not there?
Windows Backup timed-out before the shared protection point was created.
ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try this operation again.
Event Viewer Log:
Sequence of Events...
1.
The Block Level Backup Engine service has successfully started.
2.
Backup operation that started...
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 8/12/2014 4:51:06 AM
Event ID: 521
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: mdnfile.Auxiant.local
Description:
The backup operation that started at '?2014?-?08?-?12T09:41:00.492000000Z' has failed because the
Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed
with following error code '2155348001'.
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
--> Suggestion are to check Virus scanner or consult DPM forum...
3.
OS Job failed with errors...( Backup Assist is 3rd party backup - wrapper round Wbadmin/Win Backup)
Log Name: Application
Source: BackupAssist
Date: 8/12/2014 4:51:51 AM
Event ID: 5634
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Backup job OS backup failed with errors.
Critical error: Unable to create VSS snapshot
Destination: External disk
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
Destination: External disk
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
4.
Backup Assist reports via Win backup - Snapshot in progress
Log Name: Application
Source: BackupAssist
Date: 8/12/2014 4:52:20 AM
Event ID: 5634
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Backup job Data backup failed with errors.
Ultra critical error: Volume Shadow Copy Error 0x80042316 - snapshot set in progress
Destination: Local directory
Start time: 8/12/2014 4:52:10 AM
End time: 8/12/2014 4:52:12 AM
Duration: 00:00:02.7300000
5.
The Block Level Backup Engine service has stopped.
6.
Later...we tried manually stopping VSS and SWPRV services - only VSS had the issue.
WBengine was not running...
C:\>sc stop swprv
SERVICE_NAME: swprv
TYPE : 10 WIN32_OWN_PROCESS
STATE : 3 STOP_PENDING
(STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc query swprv
SERVICE_NAME: swprv
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc query wbengine
SERVICE_NAME: wbengine
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc query vss
SERVICE_NAME: vss
TYPE : 10 WIN32_OWN_PROCESS
STATE : 3 STOP_PENDING
(STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc stop vss
[SC] ControlService FAILED 1061:
The service cannot accept control messages at this time.
Log Name: Application
Source: VSS
Date: 8/12/2014 9:20:33 AM
Event ID: 8225
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
The VSS service is shutting down due to shutdown event from the Service Control Manager.
7.
VSS still having issues here...not stopping!
Log Name: Application
Source: VSS
Date: 8/12/2014 9:42:33 AM
Event ID: 11
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Volume Shadow Copy Service information:
The COM Server with CLSID {e579ab5f-1cc4-44b4-bed9-de0991ff0623} and name IVssCoordinatorEx2 cannot be started.
Most likely the CPU is under heavy load. [0x80080005, Server execution failed]
8.
Not sure why this is started again?
Plus a DCOM timeout...
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 8/12/2014 9:31:13 AM
Event ID: 753
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: mdnfile.Auxiant.local
Description:
The Block Level Backup Engine service has successfully started.
Event Xml:
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 8/12/2014 9:31:43 AM
Event ID: 10010
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
The server {E579AB5F-1CC4-44B4-BED9-DE0991FF0623} did not register with DCOM within the required timeout.
9.
Lots more errors about VSS...repeating Event ID's 11 and 8193...
Log Name: Application
Source: VSS
Date: 8/12/2014 9:42:33 AM
Event ID: 8193
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance.
hr = 0x80080005, Server execution failed
. Operation:
Instantiating VSS server
10.
Then, finally stopping again...
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 8/12/2014 9:51:13 AM
Event ID: 754
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: mdnfile.Auxiant.local
Description:
The Block Level Backup Engine service has stopped.
11.
And still repeating 11 & 8193 at this point...as we write up this post.
12.
This was suggested by the Backup Assist - software vendor....
A.)
...for 0x81080101:
"ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try again this operation."
If you receive the above error in your report, we have recently found a registry key which
contains the timeout value set by Microsoft for VSS and found that you can edit this to extend it.
To get to the registry key, open Regedit (Start > Run > Regedit) and browse to:
"HKLM\Software\\Microsoft\\Windows NT\\CurrentVersion\\SPP\\CreateTimeout".
Change value to 1200000 (2*10*60*1000 = 20 mins).
The default for the timeout period is 10 mins so hopefully doubling this will give enough time to
complete the snapshot.
If this isn't present, you'll need to manually enter the registry key. It's a DWORD 32-bit key.
--> NOTE: HAve not done this yet.
B.)
And for 0x80080005...
http://support.microsoft.com/kb/870655/en-gb
Our server does have high CPU load at times...
13.
Another post from technet mentions system volume size - here is our layout below:
A.)
OS/system Disk...
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
Disk 0 Online 278 GB 0 B (System Vol = C: Drive - OS w/ Programs and batch jobs)
Disk 1 Online 2791 GB 0 B * (Data drive - DFS, rsync,etc. run on D: Drive)
Disk 2 Online 1863 GB 0 B (USB 2/3.0 - Enclosure w/ SATA disk = 2GB formatted w/ NTFS.)
DISKPART> detail disk
DELL PERC H710P SCSI Disk Device
Disk ID: CA0DEEA5
Type : RAID
Status : Online
Path : 1
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0100)#PCI(0000)#RAID(P01T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : Yes
Pagefile Disk : Yes
Hibernation File Disk : No
Crashdump Disk : Yes
Clustered Disk : No
Volume ### Ltr Label Fs Type Size Status Info
Volume 1 RECOVERY NTFS Partition 3072 MB Healthy System
Volume 2 C OS NTFS Partition 275 GB Healthy Boot
B.)
Backup disk...
ST320006 41AS USB Device
Disk ID: 801AF48C
Type : USB
Status : Online
Path : 0
Target : 0
LUN ID : 0
Location Path : UNAVAILABLE
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
Volume ### Ltr Label Fs Type Size Status Info
Volume 4 F BACKUPS NTFS Partition 1863 GB Healthy
C.)
NOTE:
Also on disk 0(system Disk) - we have a small OEM partition = 39MB and a Recovery Partition = 3GB.
D.)
Issues with WBAdmin now...
C:\>wbadmin get disks
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x80042302)
A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
14.
Ran "Check-Disk" -no errors...
C:\>chkdsk
The type of the file system is NTFS.
The volume is in use by another process. Chkdsk
might report errors when no corruption is present.
Volume label is OS.
WARNING! F parameter not specified.
Running CHKDSK in read-only mode.
CHKDSK is verifying files (stage 1 of 3)...
116224 file records processed.
File verification completed.
654 large file records processed.
0 bad file records processed.
0 EA records processed.
76 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 3)...
156676 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
CHKDSK is verifying security descriptors (stage 3 of 3)...
116224 file SDs/SIDs processed.
Security descriptor verification completed.
20227 data files processed.
CHKDSK is verifying Usn Journal...
35628352 USN bytes processed.
Usn Journal verification completed.
Windows has checked the file system and found no problems.
289233919 KB total disk space.
100241492 KB in 85477 files.
57380 KB in 20228 indexes.
0 KB in bad sectors.
226627 KB in use by the system.
65536 KB occupied by the log file.
188708420 KB available on disk.
4096 bytes in each allocation unit.
72308479 total allocation units on disk.
47177105 allocation units available on disk.
15.
There are no backup error logs here - only .etl files...
C:\Windows\Logs\WindowsServerBackup\
Wbadmin.1.etl = 9:42AM on 8/12
Wbadmin.2.etl = 4:51AM on 8/12
Per windows Win troubleshooting:
http://technet.microsoft.com/en-us/library/ee692290(WS.10).aspx
http://blogs.technet.com/b/filecab/archive/2009/09/16/diagnosing-failures-in-windows-server-backup-part-1-vss-spp-errors.aspx
--> Related to Windows backup and not VSS?
2155348001 - 0x80780021 - Windows Backup timed-out before the shared protection point was created.
Should we run the "FIXVSS08.BAT" script - restarts services and re-registers DLL's - does this ever help?
Will this server need a reboot since VSS is in a state and we can't even test backups?
Is there a tool we can use to debug VSS or troubleshoot or OS backups further?
MSReport/Diag, VSS debugging, or another way of helping fix our OS(SystemState/C: drive) backup issues?
Any help is greatly appreciated - thx.
-SP
Scot PichelmanHi Scot,
Sometimes a third party backup application will change the default VSS provider adding VSS writers which causes Windows Server Backup using an incorrect component in doing backup, that's why I suggest to delete it for a test. Anyway you can reinstall it
after testing.
And as you said a high-load CPU could also be the cause of the issue so you may need to first rule hardware effective out.
If issue still exists, please try the steps below as well:
1. Please check DCOM Server Process Launcher service is started.
2. If not, try to change RPC service to run as SYSTEM account. To do this please modify the following key:
Note: Backup the key before edit incase it cause any issue.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\RpcSs\
Find "ObjectName" and change the value to LocalSystem.
Reboot to see if DCOM back to work and if Windows Server Backup starts working. If not, please provide the result if there is any new error occurs.
If DCOM still not work, please compare the content of the following key with a working server:
HKEY_LOCAL_MACHINE\Software\Microsoft\OLE
Edit if there is any difference and make sure you created a backup of the key before editing.
If you have any feedback on our support, please send to [email protected] -
ITunes 10.5 very slow syncing with idevices not a backup issue
I have the latest itunes 10.5.2 installed on my 32 bit Windows 7 pc. Ever since i upgraded my ipod 4 and iphone 4 to ios 5 it syncs very slowly with itunes (1 song aka 5 mb every 2 min and takes like 7 min to start syncing). i have tried restoring my phone and ipod with a new profile, making my ipod or iphone backup to icloud so that kills the long backup issue, reinstallled windows and just have itunes, reinstall itunes and wipeout the appledrivers then reinstall. The devices sync fine when i use a mac that isnt mine. i also have tried outher windows pcs with no luck. im out of ideas and im tired of wating 4 hrs just for a audiobook or a movie to sync.
Yeah seriously, I have my first gen iPhone and never had a issue with it. Blackberry always had a horrible desktop manager for the PC for YEARS and I always had to debug the issues myself for clients. Unfortunately for a lot of my clients the Blackberry is a better device for business, just horrible desktop software.
Eventually I'll push my client to move over to hosted exchange server, But for right now before making that push, I need to resolve this issue with the Blackberry sync. I would hate for all the work and conversion over to the Mac to be wasted over a simple issue that possibly can be resolved by a simple setting I'm over looking.
It's also a possibility the extremely slow syncing can be caused by years of unorganized entering of contacts, but trying to sort out over 2000 contacts would be near impossible for a person with a busy schedule. -
I recently purchased the K210 after researching prices and specs and think I have what should be a pretty sweet machine. However, after about 8-10 days of operation I was getting frequent create new base backup message until it reached the point that about 5 minutes after creation I would receive the message again. I am on 56K internet connection and it required almost a week to completely download all the files that Windows Update considered important. Upon checking the system I discovered that the service partition was almost completely full, 27 out of 30G. Being brand new at all of this I did something wrong but was able to restore factory settings. I am now afraid to download windows updates for fear of the same problem. I currently ignore the request to create base backup. What I need to know is if I was doing something wrong...Should the service partition become that full so quickly? I have never owned a machine with the service partition so I need to know how to access or store files on D directory. The only supplemental program I have added is a Lexmark printer which was recognized and operates correctly. Hope I asked the right questions. Excuse my newness!!!
When all is said and done, there is nothing left to say or do...Hi Fishoutofwater
You could see if tech support can help as this issue can have so many solutions depending on your PC build and your version of onekey, the way your OS is configured. etc.
It may also be helpful to search these forums for all info about base backup issues.
There is a 3000 system discussion thread, about onekey recovery and the lenovo recovery system.
Acronis True Image or Norton Ghost is a way to do an image backup, you most likely want to get your base backup and recovery system working as Lenovo has set it up. (onekey).
Again, It may be helpful to search the forums threads or google for for "lenovo one key recovery" "Lenovo recovery" "lenovo base backup" , and then talk to to tech support.
Good Luck.
Gadget.
Message Edited by GADGET on 09-07-2008 11:42 PM -
RMAN Backup Issue when Full backup file was missing
Hi,
On : 11.2.0.2 version, Recovery Manager
RMAN Backup issue
Last week we had the NFS Issue where we backup the files onto NFS.
The problem occurred in the below sequence
Saturday the backup was successful
Saturday before deleting the backup files they are copied to tape
Deleting the backup files via OS command
Sunday Full backup started but due the NFS issue backup failed(Killed the instance and restarted)
Did the RMAN Incremental backup which worked on Monday
On Tuesday RMAN started complaining and started doing the Full backup.
no parent backup or copy of datafile 1 found
no parent backup or copy of datafile 3 found
no parent backup or copy of datafile 24 foundSony any idea why the Incremental backup worked on Monday but not on Tuesday
Regards
NMOk here is why I would like exact filenames..
1) to speed the time of recovery. I am much more familiar with traditional recovery methods than RMAN, and while I myself installed and suggested RMAN for backups, our other (11i) database does not use RMAN and so I am more familiar with traditional recovery. So to be able to recover quickly I want to have these files as close as possible to the original names so that I can use my standard script (from a trace file) to recreate the control fiile. If I can get RMAN to spit out the filies with original names but keep RMAN for making the backup, I may ditch the rman bacjup script in chron and write a traditional hot backup script which copies the files the old fashioned way.
2) to reduce cloning time. The RMAN duplicate command is not as good as I thought. I was actually easier for me to restore RMAN backups first to a box that has all the same paths, and THEN shutdown (cold) these files and copy them cold to another server, and restore from there. Agaiin if I can get the original file names, I could choose to do recovery either way (RMAN or traditional) in a real emergency instead of being forced to use rman.
3) to be able to switch to a backup file in the FRA without having to rename it. Seems logical if it is already named correctly.
thanks ! Marvi -
RMAN 11gR2 DUPLICATE TARGET FOR STANDBY FROM ACTIVE DATABASE - Issue -HELP
First question.
Can primary and standby database have the same SID name?
As I recall it is yes.
I believe they must have different GLOBAL or DB_UNIQUE_NAME?
Anyway, RMAN I believe is telling me it is having problems copying control file on first and dies.
Permissions Issue on STANDBY machine?
RMAN> connect target backup_admin/backup_admin
connected to target database: LABDG (DBID=1973403623)
RMAN> connect auxiliary sys/oracle@STANDBY;
connected to auxiliary database: LABDG (not mounted)
RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE;
Starting Duplicate Db at 18-JUL-11
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=10 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwLABDG' auxiliar
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwLABDG' ;
executing Memory Script
Starting backup at 18-JUL-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=151 device type=DISK
Finished backup at 18-JUL-11
contents of Memory Script:
backup as copy current controlfile for standby auxiliary format '/u01/oradat
restore clone controlfile to '/u01/app/oracle/flash_recovery_area/LABDG/cont
'/u01/oradata/LABDG/control01.ctl';
executing Memory Script
Starting backup at 18-JUL-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile copy
copying standby control file
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/18/2011 11:20:54
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 07/18/2011 11:20:
ORA-17628: Oracle error 19505 returned by remote Oracle serverHi,
Permissions Issue on STANDBY machine?First problem I see is the sysdba password must be the same on both sides (target and auxiliary dbs).
From the documentation.
The source database and auxiliary instances must use the same SYSDBA password, which means that both instances must have password files. You can
create the password file with a single password so you can start the auxiliary instance and enable the source database to connect to it.Check all prereqs for the standby db duplicate here.
http://download.oracle.com/docs/cd/E11882_01/backup.112/e10643/rcmsynta020.htm#i81724
Rgds,
Tycho -
Experts,
I'm trying to setup a single server standby database for a RAC primary database using Data Gaurad configurations. In this process, I have finished all the configuration and I was about to run RMAN script to duplicate primary DB on Standby DB.
When I exectue RMAN script, it is throwing below errors :
tarting backup at 05-DEC-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=901 instance=iam1 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/05/2011 15:31:42
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 12/05/2011 15:31:42
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01031: insufficient privileges
ORA-17629: Cannot connect to the remote database server
Additional information:
- Password file is copied properly from RAC primary and standby database.
- Able to connect to standby DB from Primary database via sqlplus tool.
- Telnet is working fine vice versa.
- All pings are working fine.
Please let me know if you have any suggestions. Happy to provide further information if needed.
ThanksPlease do not create multiple threads for the same issue.
Data Guard Setup : RMAN Active Duplicate Issue -
I am trying to activate the backup assistant. Have the app on my iPhone 4s. rec'd an access code from Verizon but every time I y=use it I get an error message. Have been trying to initiate a live chat with service rep but all roads lead to nowhere. The Verizon home page is not user friendly at all. Anyone have a solution???
Hello sled,
Help is just a post away my friend. It will be my pleasure to assist in getting Backup Assistant activated for you. May I ask are you able to access the web on your iPhone 4S without any issues? Also, have you used Backup Assistant before, whether on this device or a previous device? I would suggest removing the app, reset the network settings, reboot the device, re-download the app, and attempt the setup again. For steps on how to reset network settings, here's a link for you.
http://vz.to/19OMzKU
Let me know the results, just in case more assistance is needed.
Thank you...
ArnettH_VZW
Follow us on Twitter @VZWSupport -
Active Directory Issues 10.7.4 & 10.7.5
Hi
I'm having problems with all my 10.7.4 & 10.7.5 mac's. They're losing their connection to AD. When I got to unbind I get the follwing error:
Unable to access domain controller
This computer is unable to access the domain controller for an unknown reason. Warning: If you click force unbind you will leave an unused computer account in the directory.
I then get an option to ok or force unbind. If I force unbind if I force unbind I get the following error:
An unknown error occurred
An unknown error occurred
Helpful, I'm sure you'll agree! If I go in to Console I can see the following to errors:
02/10/2012 16:01:25.682 Directory Utility: An instance 0x7f8f02b30f30 of class ODCUnbindFromADAction was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x7f8f02b56970> (
<NSKeyValueObservance 0x7f8f02b568c0: Observer: 0x7f8f01cea980, Key path: progressStatus, Options: <New: NO, Old: NO, Prior: NO> Context: 0x0, Property: 0x7f8f02b569a0>
and...
02/10/2012 16:03:32.463 Directory Utility: -[SFAuthorization obtainWithRights:::::] failed with error Error Domain=NSOSStatusErrorDomain Code=-60007 "The operation couldn’t be completed. (OSStatus error -60007.)" (The authorization was denied since no user interaction was possible. )
When users are curently logged in they lose access to SSH sessions, and network drives etc... they have had issues with saving work and subsiqently losing it!
When I go in to opendirectyd.log I see the following:
2012-10-02 15:37:42.208 BST - opendirectoryd (build 172.17) launched...
2012-10-02 15:37:42.265 BST - Logging level limit changed to 'error'
2012-10-02 15:37:42.902 BST - Initialize trigger support
2012-10-02 15:37:42.904 BST - Registered node with name '/Active Directory' as hidden
2012-10-02 15:37:42.904 BST - Registered node with name '/Configure' as hidden
2012-10-02 15:37:42.905 BST - Discovered configuration for node name '/Contacts' at path '/Library/Preferences/OpenDirectory/Configurations//Contacts.plist'
2012-10-02 15:37:42.905 BST - Registered node with name '/Contacts'
2012-10-02 15:37:42.906 BST - Registered node with name '/LDAPv3' as hidden
2012-10-02 15:37:42.939 BST - Registered node with name '/Local' as hidden
2012-10-02 15:37:42.964 BST - Registered node with name '/NIS' as hidden
2012-10-02 15:37:42.965 BST - Discovered configuration for node name '/Search' at path '/Library/Preferences/OpenDirectory/Configurations//Search.plist'
2012-10-02 15:37:42.965 BST - Registered node with name '/Search'
2012-10-02 15:37:43.024 BST - Discovered configuration for node name '/Active Directory/NUCA-AD' at path '/Library/Preferences/OpenDirectory/Configurations/Active Directory/NUCA-AD.plist'
2012-10-02 15:37:43.024 BST - Registered subnode with name '/Active Directory/NUCA-AD'
2012-10-02 15:37:43.024 BST - Registered placeholder subnode with name '/Active Directory/NUCA-AD/All Domains'
2012-10-02 15:37:43.040 BST - Discovered configuration for node name '/LDAPv3/nuca-mon1.nuca.ac.uk' at path '/Library/Preferences/OpenDirectory/Configurations/LDAPv3/nuca-mon1.nuca.ac.uk. plist'
2012-10-02 15:37:43.040 BST - Registered subnode with name '/LDAPv3/nuca-mon1.nuca.ac.uk'
2012-10-02 15:37:43.108 BST - Loaded bundle at path '/System/Library/OpenDirectory/Modules/legacy.bundle'
2012-10-02 15:37:43.307 BST - Loaded bundle at path '/System/Library/OpenDirectory/Modules/search.bundle'
2012-10-02 15:37:44.311 BST - '/Search' has registered, loading additional services
2012-10-02 15:37:44.311 BST - Initialize augmentation support
2012-10-02 15:37:44.352 BST - Loaded bundle at path '/System/Library/OpenDirectory/Modules/SystemCache.bundle'
2012-10-02 15:37:44.423 BST - Successfully registered for Kernel identity service requests
2012-10-02 15:37:44.482 BST - Loaded bundle at path '/System/Library/OpenDirectory/Modules/PlistFile.bundle'
2012-10-02 15:37:44.566 BST - Loaded bundle at path '/System/Library/OpenDirectory/Modules/FDESupport.bundle'
2012-10-02 15:37:45.461 BST - Loaded bundle at path '/System/Library/OpenDirectory/Modules/ConfigurationProfiles.bundle'
2012-10-02 15:37:45.463 BST - Registered subnode with name '/Local/Default'
2012-10-02 15:37:45.556 BST - Loaded bundle at path '/System/Library/OpenDirectory/Modules/ldap.bundle'
2012-10-02 15:37:45.600 BST - Loaded bundle at path '/System/Library/OpenDirectory/Modules/AppleODClient.bundle'
2012-10-02 15:37:45.645 BST - Loaded bundle at path '/System/Library/OpenDirectory/Modules/ActiveDirectory.bundle'
2012-10-02 15:37:45.654 BST - Loaded bundle at path '/System/Library/OpenDirectory/Modules/Kerberosv5.bundle'
2012-10-02 15:37:45.858 BST - Loaded bundle at path '/System/Library/OpenDirectory/Modules/NetLogon.bundle'
2012-10-02 15:37:45.858 BST - Registered subnode with name '/Active Directory/NUCA-AD/nuca.ac.uk' as hidden
2012-10-02 15:37:45.859 BST - Unregistered placeholder node with name '/Active Directory/NUCA-AD/All Domains'
2012-10-02 15:37:45.860 BST - Registered subnode with name '/Active Directory/NUCA-AD/All Domains'
2012-10-02 15:37:45.861 BST - Registered subnode with name '/Active Directory/NUCA-AD/Global Catalog' as hidden
2012-10-02 15:37:57.468 BST - failed to retrieve password for credential
2012-10-02 15:37:59.051 BST - failed to retrieve password for credential
2012-10-02 15:38:04.052 BST - failed to retrieve password for credential
2012-10-02 15:38:14.054 BST - failed to retrieve password for credential
2012-10-02 15:38:29.056 BST - failed to retrieve password for credential
2012-10-02 15:38:49.076 BST - failed to retrieve password for credential
2012-10-02 15:39:11.505 BST - Loaded bundle at path '/System/Library/OpenDirectory/Modules/configure.bundle'
2012-10-02 15:39:11.900 BST - Loaded bundle at path '/System/Library/OpenDirectory/Modules/keychain.bundle'
Interestingly enough, the problem doesn't seem to effect users runing 10.6.8 or my iMac which is running 10.8.2. I've spoken to network manager and he can't see anything strange going on, on the network.
I've also spoekn to our AD guy and nothing has changed.
This is now the second time it's happend, I've managed to get everyone working (before it happened again) by deleting the AD plist in /Library/Preferences/OpenDirectory/Configurations/Active\ Directory/ then rebinding via a scipt pushed out via ARD
If anyone can offer any assitance I'd be most gratful as I'm about to be shot by our users! as it's the start of our new academic year!
Thanks!
PaulIt's been a few weeks now, and (touch wood) it's not happended again on mass. We have had a few individual ones, but nothing major.
We still don't quite know exactly what happened, but trouble shooting found the following:
Our time server wasn't working corrctly centrifys ADCheck tool showed it as having a firewall (even though it didn't) our AD guy fixed that problem (sorry not sure exactly what he did)
We checked the AD kerberos ticket from a machine that lost it's connection to AD, on another mac that worked and found that it couldn't connect as the password was wrong. It seems that by default Active Directory ticket wants to change it's password every 14, and when trying to it's failing so I set it to 0
We had tried to set the server the AD plugin see's to a specific DC but this wasnt happening due to subnets not being configured in AD sites and Services
Some of the Mac's did not like being set to GMT in the time zone and the time was an hour out, people where able to login though! So I've now set them to Eurpoe\London and they're now picking up the correct time and even picked up the daylight savings over the weekend.
Our DNS is still not great but we are in the process of sorting out our subnets and when we do the consolodation we'll also asign reservations for all the mac's in the hope that apeases DDNS
Thanks Paul -
Deleting expired application logs is key to improving mass activity performance issues
During mass activity runs reference is made to the system's application logs during the process of line item selection. Performance based issues can be overcome by deleting old/expired application logs from the system, and rebuilding the affected table index. Based on my analysis on these issues, there has been a significant observation of 90% improvement in performance.
Dear Astrid,
Depending on the performance trace observed using transaction ST12, if for instance the SELECT on a particular table takes the most time, deleting all expired application logs and rebuilding the table index will result in a significant performance improvement.
Yes 90% improvement will be observed across the entire mass activity run. In my example below I use table BALHDR.
1. Run report SBAL_DELETE to delete all expired
application logs from table BALHDR
1.1. At the selection screen of report
SBAL_DELETE, set the radio button for the expiry date to 'Only logs which have
reached their expiry date’
1.2. Under the tab for 'Selection
conditions', enter the affected transaction code. e.g FPVA
1.3. To delete the entries, set the radio
button under the Options tab to 'Delete immediately'
1.4. Finally, execute or use shortcut F8 to
delete logs
2. Rebuild index 1 on table BALHDR (create a
secondary index on the table).
I hope this helps.
Kind Regards,
Adrian
Maybe you are looking for
-
Exchange rate in BAPI_ACC_DOCUMENT_POST
Is there any way to post document using BAPI_ACC_DOCUMENT_POST with exchange rate as /1.2
-
Balancing field "Profit Center" in line item 001 not filled in MIRO
The error Balancing field "Profit Center" in line item 001 not filled while doing the MIRO for asset PO only Please help me out to set the error chris
-
CJ20N Project Builder Validation Programming - Assistance requested
This is a how-to request. I am trying to validate user entry at save time in the CJ20N Project Builder (Project Systems). The desire is to enforce that the project, wbs, and network company codes are all the same prior to saving a NEW project. Th
-
Hi All, When I migrate discoverer 10g to other server, some discoverer reports of GL,AP,AR didn't run and return no data, I checked this is why these discoverer reports no privilege get data. but if i migrate discoverer to other direcotry in same ser
-
VMWare Host and Guest Shutdown Sequence
I have 2 hosts with various guests dispersed between the two. Is there a way to set the priority of which host starts the process to shut down first? Say I want to have Host2 powered off first since it holds the second DC and have it power up in the