WSP deployment to multyiple fronend server in sharepoint 2013 not reflecting the updated solution

Hi I have created a wsp package and deployed it to the multiple front end server. It was working fine on initial deployment. However after doing some change in JS file, I update the solution (through PowerShell update solution command) and found
it's not reflecting in Browser . Even if i have checked the file in both front end are updated (in 15 hive).
Thanks and Regards
Er.Pradipta Nayak
Visit my Blog
Xchanging

If the files are updating on the front end servers, but not showing changes in the browser then the problem is that the .JS files have been cached by the browser. You need to clear the Browser cache after this kind of change before the change will
be reflected in the browser. You can manually clear the browser cache in IE using the developer toolbar [F12].
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Similar Messages

Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities.

Hello,
I have the following scenario for the installation of EPM 2013 environment:
1 Server running Windows 2008 R2 SQL Server 2008 R2 Service Pack 2
1 Windows Server 2008 R2 Standard SP1, running Sharepoint 2013 Enterprise (Standard Initially installed and then migrated to the Enterprise in order to install Project Server 2013), Project Server 2013 and Workflow 1.0 (2013).
After configuring and validating the configuration of Workflow 1.0 by http://server_name.example.com:12291 page and also check the Application Services in Central Administration and receive the Workflow Status = Connected.
Alright, but when I run the SPD 2013 RTM to test the creation of Sharepoint Workflow 2013, I get the following warning:
"Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities."
I've tried:
a. Restart SPD2013;
b. Restart Server 2013 and Sharepoint Workflow 1.0;
c. Reinstall and reconfigure Workflow 1.0
And the message is always displayed, preventing the use of Workflow Sharepoint 2013.
Can anyone help me, I'm in the middle of a deployment to a customer.
Print of alert

How did you uninstalledLanguage Pack from SharePoint 2013 ? when I googled it I found that language pack cannot be uninstall@
http://technet.microsoft.com/en-us/library/cc262108.aspx
"If you no longer have to support a language for which you have installed a language pack, you can remove the language pack by using the Control Panel. Removing a language pack removes the language-specific site
templates from the computer. All sites that were created that have those language-specific site templates will no longer work (the URL will produce a HTTP 500 - Internal server error page). Reinstalling the language pack will make the site functional again.
You cannot remove the language pack for the version of SharePoint 2013 that you have installed on the server. For example, if you are running the Japanese version of SharePoint 2013, you cannot uninstall the Japanese language support for SharePoint 2013."

Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

While saving a workflow using SharePoint designer on a SharePoint site, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
Steps to recreate error:
Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
Access the list using SharePoint Designer 2013, in the workflow section, click new workflow.
In the new workflow dialog, enter workflow details, click save (see screenshot below).
Error message is displayed as below:
After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
Workaround
When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
Notes
Workflow Manager 1.0 is installed.
The site has been registered with Workflow manager using Register-SPWorkflowService
cmdlet.
Any clue on why is this happening?

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to Use Team Foundation Server With SharePoint 2013 For Development

Hi All,
As i am new to team foundation server and i want to use team foundation server for our development. Please give me good startup point.

Hi,
If you wanted to integrate Team Foundation Server with SharePoint 2013,
there are two articles for your reference:
http://dumians.wordpress.com/2013/04/01/integrate-team-foundation-server-with-sharepoint-2013/
http://nakedalm.com/integrate-sharepoint-2013-with-team-foundation-server-2013/
By the way, you can also post the question in in Visual Studio Team Foundation Server forums and more experts will assist you.
Team Foundation Server – General http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=tfsgeneral
More information:
SharePoint Products requirements for Team Foundation Server:
http://msdn.microsoft.com/en-us/library/hh667648.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Is there a way in install a trial version of Project server on a Licensed edition server of sharepoint 2013?

Is there a way in install a trial version of Project server on a Licensed edition server of sharepoint 2013? Is there anyway around this or do I need to make a new box all trial versions to test this out?
Thanks
James T.F

James,
Yes, it is possible , however I wont recommend to do it. Since, once Project trial period expires you need to uninstall project server which can not be done without uninstalling SharePoint. Unless you are willing to rebuild the farm once your
testing is completed
Hrishi Deshpande
Senior Consultant

Replace FE and APP server in SharePoint 2013 farm

Hello,
We have to replace the front-end web and app server from a SharePoint 2013 farm. The farm only has 1 FE, 1 APP and 1 SQL server. As the FE and APP were wrongly patched and have unsupported software installed there's no way of getting all servers
at same version level and to succesfully run the Product Configuration Wizard. The database server is ok but we have to replace the 2 other servers.
Is there any documented procedure to perform this migration/reinstall?
Thanks!
Martin

for first approach.
1- go to central admin and add all roles you need for the server that will stay
2- log into the server you will remove then run configuration wizard and choose disconnect from farm
you will have now one server, you can clean it up and keep it or later remove it when u have the new one
3- to add new server
https://technet.microsoft.com/en-us/library/cc261752.aspx
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you

Machine translation service in SharePoint 2013 not working

We have configured a Multilingual Site in SharePoint 2013.
Created source site in English (en-us) and other language site in Spanish (es-es). In Spanish site first time machine translation initiated successfully and after a while we checked the variation log status it’s showing Translation Status
as “Error” for that page. Checked the variation logs list in root site collection and found as below:
Title
Created
Modified
Success Messages
Errors Encountered
Translation Export
14-01-2013 16:15
14-01-2013 16:15
Translation export started processing work item.Started exporting list /sites/Variations/es-es/Paginas.Created translation package /sites/Variations/Translation Packages/SHAREPOINT_system/es-es-Paginas-20130114T1044480000Z-0/es-es-Paginas-0001.xlf.Export
for item /sites/Variations/es-es/Paginas/About-Us.aspx succeeded.Term About Us in term set Variations Navigation (es-es) has no translatable content.Created machine translation job 00000000-0000-107d-80f6-fe3012e14a82.Translation export finished processing
work item.
Translation Import
14-01-2013 16:30
14-01-2013 16:30
Translation import started processing work item.Machine translation job 00000000-0000-107d-80f6-fe3012e14a82 completed.Translation import finished processing work item.
Machine translation of package /sites/Variations/Translation Packages/SHAREPOINT_system/es-es-Paginas-20130114T1044480000Z-0/es-es-Paginas-0001.xlf failed with error message: The file could
not be downloaded from the SharePoint library because the user's permissions have changed. Please contact your system administrator to determine how permissions can be restored..
Next time onwards if we try to initiate machine translation its showing following error:
No se puede completar la operación actual. Vuelva a intentarlo o póngase en contacto con el administrador del sistema.
Error durante la traducción porque el servicio de traducción en línea no estaba disponible. Reenvíe este archivo para la traducción. Si se vuelve a producir
el error con el archivo con este mensaje de error, póngase en contacto con su administrador del sistema.
Puede reintentar la operación, pero primero tendrá que borrar los datos a medio crear. Si el problema persiste, póngase
en contacto con el administrador del sistema.
Identificador de correlación: 7d96f59b-3506-a08f-efbe-d9fbcec2f8d3
Fecha y hora: 17/01/2013 12:09:10
We have configured machine translation service using the technet link:
http://technet.microsoft.com/en-us/library/jj553772.aspx
As per the prerequisite everything is done except: server-to-server authentication and app authentication.
We are not very sure why this is required and with which server we need to configure server-to-server authentication.
Regarding this error we verified below link and everything is in place as suggested.
http://blogs.msdn.com/b/weslbo/archive/2012/11/07/sharepoint-2013-machine-translations-the-translation-failed-because-the-online-translation-service-was-unavailable.aspx
Any kind of help or suggestion is much appreciated. Thanks in advance!!
.Net Devoloper

Hi.
Just wondering, since it seems to be about permissions, did you see this in the TechNet article:
Important:
The account that is used by the application pool must also have Full Control permissions to the User Profile service application. If you create a new application pool and a new account, make sure that
you add the account to the list of accounts that can use the User Profile Service Application, and grant Full Control permissions to the account. For more information, see
Restrict or enable access to a service application (SharePoint 2013).
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download 'The SharePoint Branding Project' here
Download 'The final guide to Alternate Access Mappings' free whitepaper here
Download 'The final guide to SharePoint 2010 Site Settings' free whitepaper here
Download 'The final Kerberos guide for SharePoint technicians' free whitepaper here

After changing a mail list name in Server end, users can't see the update in outlook client

Dear all,
This is a real issue. I am a Help-desk in a global company and after changing a mail list name in Server end, users can't see the update in outlook client. Even I download Offline address book in full detail, user still can't see the change in her outlook.
Does anyone know how to fix it?
Thanks,
Franklin hong

Hi,
Would you please detail what you did by "changing a mail list name in Server end"? What is the mail list and what server?
If you switch to Online Mode instead of Cached Exchange Mode, does the user see the change?
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Mac OS X Server v10.7 does not show the ethernet link aggregated interface I created in Server Hardware Network Dialogue window. Are link aggregated ethernet connections not supported in Lion Server?

Mac OS X Server v10.7 does not show the ethernet link aggregated interface i created. Does Lion server support ethernet link aggregated interfaces?

Thanks for responding Cold--
Hardware: Mac Pro 3.0 GHZ quad core xeon
I read the link but it still does not explain why the aggregated dual ethernet interface does not show up in the Network tab of the hardware section Lion Server. I was able to see it on the network and looks to be using a single static IP that I assigned. My concern was that is this supported and will it allow for failover and double performance of the single network interface.
Any thoughts?
Thanks again!

Error: 500 INTERNAL SERVER ERROR after deployed the office web server in SharePoint 2013

Hi everyone,
I just installed office web server in one virtual machine which name WAC, and I followed all steps for configure and deployer with SharePoint 2013. It did fine without errors. But When I opened a word or ppt or excel in office viewer mode of SharePoint site.
It show me 500 INTERNAL SERVER ERROR, and nothing more.
Could anyone tell me why? Many thanks.

So you need to troubleshoot WAC.
http://www.wictorwilen.se/office-web-apps-server-2013---machines-are-always-reported-as-unhealthy contains an extensive explanation how to do that, the WAC log files will give a clearer indication than the "500" error, which just says it doesn't work.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Can service application be installed on sql server in sharepoint 2013

Hi ,
I want to install SharePoint server 2013. I have two machines
machine 1 : 4 Gb ram , 2.53 GHZ processor core i5 processor( I could upgrade ram to 8 GB)
Machine 2: 8 GB ram , 2.43 GHZ processor core i3 processor.
I want to install sql server 2008 R2 on one of the machine and SharePoint server 2013 on another.
I want to get best performance out of two systems.
I would do farm installation.
1.) Does sql server need to be more powerful or SharePoint server hardware wise.
2.) Can i install applications like , search server , access server etc on the server running sql server.
Basically I am looking for best performance.
Regards
Vinod
+91-9910988922

Hi vinod,
pls take machine 2 for sharepoint server installation. Justification below
http://technet.microsoft.com/en-us/library/cc262485(v=office.15).aspx
Development or evaluation installation of SharePoint Server 2013 or SharePoint Foundation 2013 with the minimum recommended services for development environments. For information, see Minimum recommended services for development environments.
8 GB
64-bit, 4 cores
80 GB for system drive
Installation Scenario
Deployment type and scale
RAM
Processor
Hard disk space
Single server with a built-in database or single server that uses SQL Server
Development or evaluation installation of SharePoint Server 2013 or SharePoint Foundation 2013 with the minimum recommended services for development environments.
For information, see Minimum recommended services for development environments.
8 GB
64-bit, 4 cores
80 GB for system drive
Single server with a built-in database or single server that uses SQL Server
Development or evaluation installation of SharePoint Server 2013 or SharePoint Foundation 2013 running Visual Studio 2012 and the minimum recommended services
for development environments. For information, see Minimum recommended services for development environments.
10 GB
64-bit, 4 cores
80 GB for system drive
Single server with a built-in database or single server that uses SQL Server
Development or evaluation installation of SharePoint Server 2013 running all available services.
24 GB
64-bit, 4 cores
80 GB for system drive
Web server or application server in a three-tier farm
Pilot, user acceptance test, or production deployment of SharePoint Server 2013 or SharePoint Foundati
Please remember to click 'Mark as Answer' on the answer if it helps you

Office web apps Server for Sharepoint 2013

Hello,
I used the following article to install office web apps server and hook it up to a test sharepoint server:
http://technet.microsoft.com/en-us/library/jj219455(v=office.15).aspx. The OWAS service was verified as working by loading:
https://owas.companyname.com/hosting/discovery
For the sharepoint configuration phase, the following commands were run on the sharepoint machine:
1) New-SPWOPIBinding -ServerName "owas.companyname.com" -- (owas.companyname.com) is the host name of the owas server)
2) Get-SPWOPIZone
3) Set-SPWOPIZone -zone "external-https"
However, office documents are still launching in the desktop office applications, not in the browser. Any ideas of what else I may need to do?
thanks,
Sherazad

Hi ,
According to your description, my understanding is that you fail to configure Office Web Apps for your SharePoint 2013.
How about run Get-SPWOPIZone? If you can get a result, it says that your SharePoint have connected with Office Web Apps.
Then you can run below command to change the zone to internal-https.
Set-SPWOPIZone -zone "internal-https"
Reference:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
http://stevegoodyear.wordpress.com/sharepoint-2013-build-guide/office-web-apps-2013-server-install-and-configuration/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Sharepoint 2013 search error - The search application 'Search Service Application 1' on server is not provisioned.Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.

Hi All,
I'm getting the below error in My SHarepoint 2013 search Administration page.
Crawler background activity - The search application 'Search Service Application 1' on server "" is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
on the server.
and when i click on Crawl Log and content source
it throws the below error
The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
the service is enabled. This might also be because an indexer move is in progress
When i check the search status
Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
As of now search service application is online and search is working.But not sure why it throws the above error.
I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
But no luck,This is happening in my prodcution environment.
Any help will be greatly appreciated.
There are the logs i have found
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.   at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable  d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm.     at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
Anil Loka

Please try below mentioned steps:
1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
Please ensure that you mark a question as Answered once you receive a satisfactory response.

Sharepoint 2013 not installed yet, so should I install Sharepointg Integrated mode on my SQL server right now?

I'm installing SQL 2008 R2 onto a Windows 2008 R2 server in preperation for a Sharepoint 2013 install.
In the midst of the SQL installation here I have the option of installing the Sharepoint Mode Default Configuration.
Should I do this or should I continue installing with native mode dafeult configuration. Then perhaps adding the Sharepoint integration afterwards.
What would you advise?

You did not mention if you are planning more than 1 server, but best practice would dictate so.
If true, then, do NOT install the SRS components (presume you mean those) on the SQL box.
If you are planning to have BOTH SSRS in Native mode and also a 2nd instance in SharePoint mode, then you "may" elect to install the SSRS Native mode elements on your SQL Server.
You want to install the SSRS instance in SharePoint mode on one of your SharePoint servers.
The requirement for SSRS in SharePoint mode is that it be placed on a SharePoint server. You have two options:
1. Make your SQL Server a full fledged SharePoint server in order to use SSRS in SharePoint mode (not recommended)
2. Setup SSRS on a SharePoint server (recommended)
Hope this helps,
Thanks, Eric S. Pcubed

Use a seperate SQL server in Sharepoint 2013

We have SharePoint 2013 installed and running and its config, content, Search, etc. DBs on SQL 2008R2.
I want to create several NEW SharePoint DBs on a different SQL server that is running SQL 2012 SP1 (For BI mainly) but Im getting errors when attempting to do this. I do have rights on the server and in SQL to perform this action but what
im afraid is that SharePoint doesn't allow me connect to two different SQL servers in the same SP farm. I'm am wrong on this assumption?

You can have as many SQL Servers attached to a farm as you want. Make sure your Farm Admin has dbcreator and securityadmin rights. Then, of course validate that there are no network or host-based firewalls blocking access to SQL ports.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

WSP deployment to multyiple fronend server in sharepoint 2013 not reflecting the updated solution

Similar Messages

Maybe you are looking for