WSRM Configuration Issues-Need Urgent Help

Dear Experts,
we are configuring WSRM between TM 9.0 and ERP 606 systems. we have followed the document from the SAP note 1043195. we have completed the technical configuration. we are facing issues in application configurations.
1. When we have tried to create central business scenario configuration connection, the input help pop-up window is showing correct values in the fields (Consumer System is ERP , Provider System is TM) but when we click on create both consumer and provider systems become ERP system)
2.For the service group TM_ERP_ORDINT, both consumer and provider system showing ERP systems and provider interface is mismatching with guide provided interfaces.
As per the guide, consumer proxy should be mapped to below respective service interfaces but system showing wrong service interfaces.(We saved the above selected entries)
how to resolve the issues?
Please help us..
Thanks and regards,
Pradeep

Bdrom probably dead. Can buy a replacement one off eBay easy enough. Replacement normally only one or two screws.
Personally I would go for seagate drive but western digital will be fine so long as you have the recovery media.
Disassembly of laptops can be tricky if you are new to it. Too long to explain here but Google for a service manual for your unit or a YouTube video. With patience and a good screwdriver it's not too much trouble.
Depending on what's wrong with the fan (man be just clogged with dust) you may need a replacement. Look for spares on ebay or spares supplier.
Ram should be easy to find out, Google the part number or check the bios. You can check the manual for compatible ram or try Kingston/crucial ram checker database (not guaranteed but rarely wrong)

Similar Messages

HP Envy 17 3D 1201tx issues, need urgent help

I had purchased HP Envy 17 3D 1201tx notebook back in March 2011, but could hardly use it due to some personal problems at my end. However, after 8 months of the purchase, when i used it, I found the BDROM drive was not working, and later on the internal cooling fan also stopped working. As, I said, due to personal problems I could not contact HP, and the laptop was not again in use for many months.
I had just about six months back started gettings SMART failure of HDD, and the hard drive gave way as well (sic).
I've contacted HP just few months back to get a paid service, but rather giving service, they misbehaved. I'm now seeking help on HP support forum, please help me getting past the issues with this expensive laptop.
issues:
1. BDROM drive would not recognize/read any writable or re-writable CD/DVD and it only recognizes read-only CDs.
My query is "is the optical drive dead or service able?"
2. Internal cooling fan is not working. Is it service able, can you guide me "how to open the laptop", so I can service or replace the cooling fan with a new one myself?
3. Internal 640 GB Toshiba HDD that came with the laptop is dead now. I have selected the following two, can you advise, which is the best between the two:
a. WD 1 TB LaptopInternal Hard Drive(WD10JPVT/WD10JPVX)
b. Seagate Solid State Hybrid Drive 9.5 mm thickness 1 TB Laptop Internal Hard Drive (ST1000LM014)
4. I also want to upgrade the RAM from factory installed 4 GB to 8 GB. Can you please advise me the dual channel RAM modules (i.e. 4x4 GB) compatible with Envy 17 3D 1201tx.
May, I request the experts here, to please suggest me the best of the compatible RAM for my laptop, so I get the maximum performance from my laptop. And, also the technical details of the factory installed RAM.
I'm live in Delhi, India.
Thanks in advance.

Bdrom probably dead. Can buy a replacement one off eBay easy enough. Replacement normally only one or two screws.
Personally I would go for seagate drive but western digital will be fine so long as you have the recovery media.
Disassembly of laptops can be tricky if you are new to it. Too long to explain here but Google for a service manual for your unit or a YouTube video. With patience and a good screwdriver it's not too much trouble.
Depending on what's wrong with the fan (man be just clogged with dust) you may need a replacement. Look for spares on ebay or spares supplier.
Ram should be easy to find out, Google the part number or check the bios. You can check the manual for compatible ram or try Kingston/crucial ram checker database (not guaranteed but rarely wrong)

Java and Batch File Issue - need urgent help

I have a java program which calls a batch file. This batch file calls another java program. I want an option so that I can close this java program from main program.
If i try process.destroy then it will call batch file and not java program.
I can't go away with batch file.
I will appreciate if someone can help me.

khannap wrote:
Hi, Thanks for the help but this doesn't seem solving my problem completely. I will appreciate if you can help more.
I will explain you the scenario -
1. There is java program provided as an external program to me.Only changes things slightly.
2. This java program is called using batch file. When batch file is started this java program starts and listens on a socket for incoming data.I would want to wrap the launch of this java program in another JVM so we can use process.destroy().
3. I am writing a program to check performance of the above java program. I want to call this java program from my program in a loop having some varying config data. When I run the loop first time I create a batch file at run time which executes the batch file provided by vendor. This batch file starts the socket. Once my message list is over then my loop goes to executing the batch file again with different config parameters. But this time I run into issue because my previous java program is not killed after message sending was over.Would it be acceptable to mung the 3rd party batch file to insert a wrapper JVM?
Even if i use threads I don't think I can get rid of batch file.I did not suggest getting rid of batch files.
So, I need to find a way so that when any iteration of loop is over then this socket program is killed. These 3rd party java programs - do they not have a "terminate" command you can put at the end of your message list?
Even if i closed the socket from my client program that doesn't help because server is still listening and waiting for new client.
I need to kill server which was started by batch file.On Linux it would be fairly simple to modify your batch file to determine what the process id is and send the process a signal to terminate it.
Not sure what you can do on Windows.

Production Issue Need urgent help

We just added new disk on our db box. its sun 890 box after that the DB is running very slow and the cpu is showing 100% is there any way we can find out the cause of the issue.
Any assistance will be highly appreciated.

Check with the OS monitoring tools. You should provide the OS and DB versions in your thread so a more proper direction on the recommended tools can be provided.
If you are on 10g you could use the performance monitor from the EM DB Console and you could see if Oracle is responsible for this high CPU consumption.
By the way. I kindly suggest you to use a more descriptive thread title, 'Urgent' and 'Production Issue' doesn't let any body figure out what you are talking about. On the other hand, labeling urgent won't make all posters go running to solve this issue, all threads are treated equally on a first come first served basis and it depends on posters availability.
~ Madrid

SSAS Cube Processing Issue,Need Urgent Help...

Hi Friends,
Good Afternoon.
I am processing the SSAs cube as it is failing with below error message.
I have tried processing the cube by using XMLA script,Direct processing.
<return xmlns="urn:schemas-microsoft-com:xml-analysis">
<results xmlns="http://schemas.microsoft.com/analysisservices/2003/xmla-multipleresults">
<root xmlns="urn:schemas-microsoft-com:xml-analysis:empty">
<Exception xmlns="urn:schemas-microsoft-com:xml-analysis:exception" />
<Messages xmlns="urn:schemas-microsoft-com:xml-analysis:exception">
<Error ErrorCode="3238395904" Description="OLE DB error: OLE DB or ODBC error: Cannot execute the query "SELECT 

CASE 
 WHEN charindex('.', [Name]) > 0 THEN upper(substring([Name], 0, charindex('.', [Name]))) 

ELSE Name 
 END COLLATE DATABASE_DEFAULT AS PackageDownloadSourceName

, 'Notification Server' COLLATE DATABASE_DEFAULT AS PackageDownloadSourceType

FROM 
 vNotificationServerSource as vNotificationServerSource WITH (NOLOCK)


UNION

 SELECT 

DISTINCT 
 vc.Name COLLATE DATABASE_DEFAULT AS PackageDownloadSourceName

, 'Package Server' COLLATE DATABASE_DEFAULT AS PackageDownloadSourceType

FROM
 vComputer AS vc WITH (NOLOCK)

INNER JOIN SWDPackageServer WITH (NOLOCK) ON vc.Guid = SWDPackageServer.PkgSvrId


UNION

 SELECT 

PackageDownloadSourceName COLLATE DATABASE_DEFAULT AS PackageDownloadSourceName

, 'Non-Altiris Server' COLLATE DATABASE_DEFAULT AS PackageDownloadSourceType

FROM 

(SELECT 
 DISTINCT 

CASE 

WHEN charindex('//', [URL]) > 0 THEN upper(substring(substring([URL], charindex('//', [URL]) + 2, len([URL]) - charindex('//', [URL]) - 1), 0, charindex('/', replace(substring([URL], charindex('//', [URL]) + 2, len([URL]) - charindex('//',
[URL]) - 1), '.', '/')))) 
 WHEN charindex('\\', [URL]) > 0 THEN upper(substring(substring([URL], charindex('\\', [URL]) + 2, len([URL]) - charindex('\\', [URL]) - 1), 0, charindex('\', replace(substring([URL],
charindex('\\', [URL]) + 2, len([URL]) - charindex('\\', [URL]) - 1), '.', '\')))) 

WHEN charindex('Multicast download complete. Master: ', [URL]) > 0 THEN upper(substring([URL], charindex('Multicast download complete. Master: ', [URL]) + 37, len([URL]) - charindex('Multicast download complete. Master: ', [URL]) - 36)) 

ELSE NULL 
 END COLLATE DATABASE_DEFAULT AS PackageDownloadSourceName

, 'Non-Altiris Server' COLLATE DATABASE_DEFAULT AS PackageDownloadSource...; 42000; The OLE DB provider "SQLNCLI11" for linked server "ITANALYTICS_CMDB_SYMANTEC_CMDB_725_CZCHOWV319\SQL02_SYMANTEC_CMDB_3741" reported
an error. Execution terminated by the provider because a resource limit was reached.; 42000; OLE DB provider "SQLNCLI11" for linked server "ITANALYTICS_CMDB_SYMANTEC_CMDB_725_CZCHOWV319\SQL02_SYMANTEC_CMDB_3741" returned
message "Query timeout expired".; 01000." Source="Microsoft SQL Server 2012 Analysis Services" HelpFile="" />
<Error ErrorCode="3240034316" Description="Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Package Download Source', Name of 'Package Download Source' was being processed."
Source="Microsoft SQL Server 2012 Analysis Services" HelpFile="" />
<Error ErrorCode="3240034317" Description="Errors in the OLAP storage engine: An error occurred while the 'Package Download Source Type' attribute of the 'Package Download Source' dimension from the 'IT Analytics'
database was being processed." Source="Microsoft SQL Server 2012 Analysis Services" HelpFile="" />
<Error ErrorCode="3238002695" Description="Internal error: The operation terminated unsuccessfully." Source="Microsoft SQL Server 2012 Analysis Services" HelpFile="" />
<Error ErrorCode="3239837702" Description="Server: The current operation was cancelled because another operation in the transaction failed." Source="Microsoft SQL Server 2012 Analysis Services" HelpFile=""
/>
</Messages>
</root>
</results>
</return>
Thank you very much for your Help.
Regards,
Reddeppa G

Hi ReddeppaG2580,
According to your description, you get the above error when processing a cube. Right?
Based on the error message, the issue occurs on the dimension 'Package Download Source'. So check the involved tables and the query for this dimension. Check the attribute 'Package Download Source' in the dimension. If you still can't find some issue, try
to recreate that dimension. Please refer to link below:
Create a Dimension by Using an Existing Table
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Transparent Partition issue-Need urgent Help

Hi All,
We have a application called( Eg: ABC) which is having a transparent partition
There are 4 transparent partitioned cubes out of which 2 ASO & 2 BSO
the daily load process for this is
if we have a cubes called XYZ and XYZ_B
First it will drops the XYZ_B cube and then creates a copy of XYZ cube called XYZ_C(which copies the partition file also) after that the data is got loaded to the copy cube (XYZ_C cube) once data load is done it will renames the original cube (XYZ) to XYZ_B & XYZ_C to XYZ cube.
At the End we have only XYZ & XYZ_B
In this process it is creating an orphan partitions in this it is showing the source as (XYZ_C cube).
Please help me how can we resolve this .
Regards,
Ravi

First it will drops the XYZ_B cube and then creates a copy of XYZ cube called XYZ_C(which copies the partition file also) after that the data is got loaded to the >>copy cube (XYZ_C cube) once data load is done it will renames the original cube (XYZ) to XYZ_B & XYZ_C to XYZ cube.I assume you are doing the above operations with partition in tact.
First drop the transperent partition.
Do the operations on the cube.
Create transperent partitrion after.

Major Ipod Issue - Need Urgent Help

A buddy of mine was playing his iPod in his Bose dock during a lightning storm (not the best idea....) and apparently his Ipod got busted. When he first described it I thoguht it had gotten fried, but after taking a look at it, I think it may still work. When attempting to plug it in via USB, it shows either a funky battery icon or the Apple icon. Seeiing this, I figured there may still be a way to save it. Attempting to use it with iTunes or iPod setup comes up with it not being recognized. So might anyone have some suggestions on how I may be able to fix this? Or perhaps my buddy can send his iPod into Apple in hopes that they may be able to salvage it? Thanks for any help.

Does it play on the charger? Currently I have a 3rd Gen iPod thats been suffering battery problems but works fine if it its being charged. I have a sound dock as well and may have played it through a lightning storm without thinking about it. I decided to purchase a do-it-yourself battery replacement kit for $10 and am still waiting for it to arrive. If it's a battery problem, the $10 kit is a much cheaper solution than the $70 Apple repair, if he doesnt have apple care.

Process Chain issue-Needs urgent Help

R/3 Master Data Main Chain
Problem Description:
When we trigger the process chain from SM64, the process chain fails at the step as shown below.
There are no logs for the local chain i.e. the local chain fails without linking.
If we manually schedule the local chain it runs successfully.
The error message changed as and when we tried fixing the defects. Each of them with the solutions tried for them is explained below.
ERROR 1:
The error message which we got was as Cannot Activate Job BI_PROCESS_LOADING (return code 8).
Solution tried:
1.     Replicating Data Sources and activating the transfer and communication structures by running the programs RS_COMSTRU_ACTIVATE_ALL and RS_TRANSTRU_ACTIVATE_ALL.
ERROR 2:
Later we found that the released job was missing for failed local chain.
Solution tried:
1.     We created a new job by copying a previous job.
ERROR 3:
When we re-scheduled the process chain, we got the error message as shown below.
Solution tried:
1.     Deleted all the logs which were in running status.
ERROR 4:
After re scheduling the process chain we are getting the error message as shown below. This is the error message we are getting now.
Solutions Tried:
1.    Saving the variant and reactivating the process chains.
2.     Replicating Data Sources and activating the transfer and communication structures by running the programs RS_COMSTRU_ACTIVATE_ALL and RS_TRANSTRU_ACTIVATE_ALL.
3.     Changing the scheduling options of the failed local chain to Start using Meta Chain or API from Direct Scheduling.
4.     We searched for locked entries in SM12. There are no locked entries.
5.     We ran attribute change run with variant for info object Profit Center from the following path
    RSA1-> Tools-> Apply Hierarchy/ Attribute Change Run. We created a new variant for the info object.
We still could not find a solution. do let us know if you have any inputs.
Thanks,
Mayuri

Hi All,
Please reply ASAP. Its critical.
We created a new process chain and when we do a check on it,we are getting a warning message.
We just upgraded our Dev box from 3.5 to 7.0. Our master data process chains, which reflect samples delivered by SAP, are giving warnings saying "too many parallel processes" for chosen server. It refers us to note 621400.
I am curious to know if others have run into this, and if they have changed their MD process chains to run in a serial fashion.
Prior to the upgrade, we had no deadlocks with process chains.
Thanks.

I need urgent help to remove unwanted adware from my iMac. Help!

I need urgent help to remove unwanted adware from my iMac. I have somehow got green underline in text ads, pop up ads that come in from the sides of the screen and ads that pop up selling similar products all over the page wherever I go. Its getting worse and I have researched and researched to no avail. I am really hestitant to download any software to remove whatever it is that is causing this problem. I have removed and reinstalled chrome. I have cleared Chrome and Safari cookies. Checked extensions, there are none to remove. I need to find an answer on how to get rid of these ads. Help please!

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Application Support/VSearch
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchAgents/com.vsearch.agent.plist
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. It must be said that this failure of oversight is inexcusable and has seriously compromised the value of Gatekeeper and the Developer ID program. You cannot rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Need urgent help in listing out checklist from DBA prespective for BI Implementation Project

Hello Guys,
We are in Designing phase Data Modeling of PDW/APS Implementation Project.
I need urgent help in making a checklist from a DBA perspective.
Like what are things ill be needing at a time of implementation/Deployment.
Your expert comments and help will be highly appreciated.
Thank you,
Anish.S
Asandeen

You can get good summary of checklist from this article about
DBA checklist for data warehousing.
Which highlights on below pointers:
New system or old. (I.e. Up-gradation vs starting from scratch)
Complexity of SQL Server architecture
SQL Server storage
Determining SQL Server processing power
SQL Server installation consideration
SQL Server configuration parameter
SQL Server security
SQL Server Database property
SQL Server jobs and automation
Protecting SQL Server data
SQL Server health monitoring and check ups
SQL Server ownership and control
based on my real time experience, I will suggest you to keep an eye on
Load performance (It will be useful when your database(Warehouse) will have huge amount of data)
System availability (Check for Windows update and up time configuration)
Deployment methodology should be planned in advance. Development of packages and respective objects should be done systematically.
Source control mechanism
Disk space and memory usage
You might or might not have full rights on production environment, so be prepared to analyze production environment via Select statements [I guess you got my point]
Proper implementation of Landing , Staging and Mart tables.
Column size (this can drastically decrease your database size)
Usage of indexes (Index are good, but at what cost?)
I hope this will assist you in building your check list.

Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sp

Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sprymenu on my local browsers opera, google crome, and IE but when it is uploaded, the sprymenu squashes to the left hand side.

Please get your checkbook ready. (Only kidding.)
Have you ever done a hard factory reset of your Airport Express base? If not, then try it. Push down the reset button with a pen, then keep it depressed as you plug AX into the wall and keep holding it down until the green light blinks 4 times and then turns amber. Then let go. Unplug your broadband modem for a couple of minutes and shut down your Mac. First restart the modem, then the Mac. Use Airport Setup Assistant to set up a new network from scratch.
In System Prefs > Network > Show > Network Port Configurations drop n drag Airport to the top of the list and deselect all port configurations that you do not use.
That's a start.

Need urgently help for OBIEE Installation (11g)

Hi all,
I am having problems trying to install Oracle Business Intelligence 11g on Windows 7.
The Installation Wizard hangs on the step: Domain Configuration (0%). The Creating Domain shows In progress.
The log under the Inventory directory shows me only following:
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
I really don't know what to do. I am searching for a solution on Internet, but I don't find it.
I need urgently help. I would appreciate someone could help me.
We can do together via Webex or something similar. It doesnt worth it for me to type here and wait till someone give me an answer (if any), trying to find out how I did.
I hope to find the help I need. I am desperated :-(

Can I install the OBIEE 10g version?I am not sure but i think OBIEE is not certified with windows 7. i could not find any MOS doc confirming same. Please log a call with oracle to confirm this.
would it work fine with the Oracle Database 11g and the RCUs?. Yes OBIEE 10g will work with oracle database 11g.
Thanks,
JD

Switch until release using keyboard...need urgent help

Hi,
i have a problem of configuring "switch until release" action using keyboard....
or is it there no this function at all...
it seems like all i can do is press to ON and press again to OFF
anyone can help...
need Urgent help....
thank you in advance..

This isn't possible because of the way operating systems
handle keyboard events. When you press a keyboard key, it does not register as
one key down. For whatever your operating system is set for as far as repeating
characters, it will register that many key down presses. The mouse works
differently, when you press the mouse it keeps that event "locked"
until you release the mouse. Because of this, you can not make a switch until
release using the keyboard; this definition is only for mouse clicks.
Brandon Vasquez | Software Engineer | Integration Services | National Instruments

Need Urgent Help: Solaris fails to come up after applying patch 120012-14

Hello All,
I really need urgent help , as I am in really big problem. Today I applied patches , the last patch I applied was 120012-14.
After this I rebooted Solaris and it is not coming up now. It is giving me following error, it reboots again and again
nel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
WARNING: mod_load: cannot load module 'hook'
/kernel/misc/sparcv9/hook: undefined symbol 'netstack_register'
/kernel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
WARNING: mod_load: cannot load module 'hook'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_register'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_event_remove'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_register'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_unregister'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_family_add'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_family_remove'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_unregister'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_find_by_stackid'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_event_add'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_rele'
WARNING: mod_load: cannot load module 'neti'
WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
/kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
/kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
WARNING: mod_load: cannot load module 'ip'
WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
/kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
/kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
WARNING: mod_load: cannot load module 'ip'
WARNING: ip: unable to resolve dependency, module 'misc/hook' not found
strplumb: can't install module drv/ip, err -1
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'cons_tem_disable'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_inverses'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'consmode'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_hide_cursor'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_pos'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_term_font_size'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_size'
WARNING: mod_load: cannot load module 'consconfig_dacf'
/kernel/misc/sparcv9/consconfig: undefined symbol 'dynamic_console_config'
WARNING: mod_load: cannot load module 'consconfig'
WARNING: consconfig: unable to resolve dependency, module 'dacf/consconfig_dacf' not found
panic[cpu3]/thread=180e000: mod_hold_stub: Couldn't load stub module misc/consconfig
000000000180b890 genunix:mod_hold_stub+1f0 (0, 185fc00, 18acbf8, 60002cff370, 1817328, 0)
%l0-3: 0000000001843b18 0000060003308000 0000000001811ce8 0000000000000000
%l4-7: 0000000000000000 0000000000000064 ffffffffffffffff 0000000000000000
000000000180b940 unix:stubs_common_code+30 (1f037ce7fb0, e164, 64000000, 0, 1ef800, 0)
%l0-3: 000000000180b209 000000000180b2e1 000000337e000000 0000000000000001
%l4-7: 0000000000000000 0000000001817338 0000000000000000 0000060002ccf6c0
000000000180ba10 genunix:main+134 (18ad050, 18a8c00, 1836500, 1861800, 183b400, 1814000)
%l0-3: 0000000070002000 0000000000000001 0000000000000000 0000000000000002
%l4-7: 00000000018b0280 00000000018b0000 00000000018ad060 00000000018ad000
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
Please help me what should I do. I have gone through all forums and mailing lists but couldnt find pin point solution.
Thanks,
Farhan
Edited by: rozzx on Jul 5, 2008 1:48 AM

Solve this. Patch just screwed the meta devices, changed vfstab in single user mod and it booted fine.

Iphone 5 changes time randomly.. need urgent help!!

hi everybody .. i need urgent help to fix the problem of my iphone 5 ( IOS 7, Vodafone Germany) .. 2 weeks ago i noticed that the time on iphone was completely wrong and not related even to other time zones .. sometimes it freezed at the same minute for 1 hour .. sometimes it ran anticlockwise.. i switched off the automatic time setting..i made reset and erased all contents and reloaded all configuration from iCloud..the same problem.. i registered it as new iPhone .. no improvement... i switched off the WIFI..3G...i made reset using iTunes .. same error. same error... i took it to Apple store in Dresden- Germany and demostrated the problem there .. they told me that the problem beyond their knowledge and i have to contact apple support ... i sent the iPhone to Apple support in Netherland ... they sent it back on the next day coz they were not able to reproduce the problem...after regestering the iPhone again with my ID.. the same problem ... it's catastrophic coz many functions are time dependent (imessege, Calender, Email, etc.. )..and i cannot rely on my iPhone anymore... has anybody encountered the same problem in germany... and what is the solution?

If the phone is failing to charge, then there are three possibilities -
1) The charging cable is defective - does it work with anything else?
2) The power source is defective - unlikely since you have tried different ones with same result.
3) The phone has a hardware failure - which means you need to take to an Apple store or call them up for advice.

WSRM Configuration Issues-Need Urgent Help

Similar Messages

Maybe you are looking for