WSRM queue lock in ERP system

Hi Guys,
We are constantly facing wsrm queue locking issue in production and its creates huge impact when the interface is EOIO where if any particular queue gets lock then rest of the messages/units of that particular queue doesnt get execute.
We have observed this issue after SPS upgrade has been done on the ERP system.
Can any one help as why the wsrm queues are getting locked so often?
Thanks.
Aki

Hi Guys,
We are constantly facing wsrm queue locking issue in production and its creates huge impact when the interface is EOIO where if any particular queue gets lock then rest of the messages/units of that particular queue doesnt get execute.
We have observed this issue after SPS upgrade has been done on the ERP system.
Can any one help as why the wsrm queues are getting locked so often?
Thanks.
Aki

Similar Messages

  • ERP system Hangsdue to oracle Locks

    Hi ;
    I am facing a critical situation for about a week that my ERP system hangs due to oracle locks .
    in st04 i found the log as dead locks detected. in DB01 i can see processes holding the table DYNPLOAD for more than 1000s and it cause the other processes waiting and the entire system hangs.
    The situation is going worse that too many processes are using this and what i am doing is removing the locks from OEM .
    Aix5.3 oracle 10g .Ecc 6 = my system configuration.
    please suggest a suitable solution for this problem
    thanks and regards
    seethy

    Hi Anil;
    I cant login as root . i logon using <sid>adm and did all three commands..
    1. whats the difference between ps -ef|grep oraadm and ps -fu oraadm. i got a list of oracle processes...
    2. shows list of <sid>adm processes...
    3. all space shows fine
    should i do it as root user whats the difference in it? i have to visit the unix department to do so..can you explain its significants..
    DYNPLOAD is the table. can we do anything on database level..i am doing  statistics check daily ..but still locking the table.
    Thanks & Regards
    seethy

  • Consuming and Providing Web Service with JD Edwards ERP system

    Hi,
    I would like to create web services with c++ or java OR any other easier way .
    I need to use that web services to use in Share point to interact with JD Edwards ERP system .
    Pls Note : Since not having license for JD Edwards, I need to create and call from Sharepoint Web service to JD edwards.
                       and not from JD edwards web service.
    Could anybody guide me in this.
    Thanks in advance.

    I had this error again so I thought I would post my solution:
    The issue is SAP needs to know the certificates being used by the web site being called.  These certificates are automatically installed in your browser but need to be manually installed in SAP.  This is what I did:
    How to find/install new certificates
    Make sure you run Internet Explorer as an Administrator so you can export the certificates
    Go to the web site that SAP is trying to call in Internet Explorer
    Double click on the lock in the address bar
    View certificates
    Find the certificates that are being used
    Tools --> Internet Options --> Content --> Certificates
    Click on the “Trusted Root Certification Authorities” tab
    Find the certificate identified in step iii
    Export as a CER certificate
    Click on the “Intermediate Certification Authorities” tab
    Find the certificate identified in step iii
    Export as a CER certificate
    Go to STRUST in SAP
    Import the Certificates in the “Anonymous” or “Standard” SSL client
    Save
    RESTART the ICM via t-code SMICM  <-- Critical!!!
    Test

  • Need a Data Integration for multiple ERP systems

    We are doing some research into a data integration layer to our BW 7.3/BOBJ 4.0 from multiple ERPs.  Of course we are looking at Data Services and Information Steward in the BOBJ suite but just looking for anybody's recommendations on the topic.
    What technology platform do you use to do the extract, transform, load processes from multiple backend sources into BW?  Any you would advise us to avoid? 

    Hello Edward,
    The answer depends on multiple factors.
    Some pointers:
    Volume and growth of db in scope planning (Federation vs replication )
    If data federation is where you want to move data services / BO tools will be ideal
    If your data is coming from multiple ERP systems you can utilize there delta queue to load data via data services (in case of SAP)
    Use native DB connect/UD connect functionalities in BW as with BW 7.3 its delta capable.
    Moving to BW 7.4 you will have SDA to solve that problem of integration to Non - SAP data into your EDW landscape
    These are pointers but I would say talk to enterprise architects and look into the foresight of wheyare you want to move your EDW platform.
    Cheers!
    Suyash

  • How to analyse the main memory usage in SAP ERP systems?

    Dear expert,
    I'm doing a research work about analysing the main memory usage in SAP ERP systems.
    I would like to find out what is load in buffers and when. That means, which process have the control of these memories and which are always performing something, tables loaded, and so on. Becuase I tried to isolate the space needed by a simple webservice call (create one material) in my test system, but even after a $SYN there are something stored in the buffers. I use a BAPI to avoid the execution of the SAPGUI and its repercussion in the system (I know the BAPI called uses resources too, but when I run this BAPI to get the statistics, it's like ST02, I get different values). Could someone help me or recommend something specific to read? Thanks a lot in advance.

    Dear expert,
    Thanks a lot for your answer. The point is now that I want to isolate the memory used by a webservice that I call, I mean, I would like to know how many memory is this webservice using in each buffer. And could you tell me where could I read something about the order that things happen in SAP System when a webservice is called (always memory related), that's which steps are done to store data in buffers and so on. Thanks in advance.

  • Communication between PC/RM Backend and ERP System

    Hi,
    Is it possible to have communication between PC/RM Backend and ERP System by cresting RFCUSER with user type communications data instead of Dialog user.
    Because of audit policy , none of DIALOG user should have SAP_ALL profile.
    Is there a option to set up communications  between PC/RM Backend and ERP System without a Dialog user setting.
    Pravin

    Hi Pravin,
       You are right and the user should be always communication or system. GRC AC allows for the user to be communication or system. Can you try with PC/RM RFC user and see if it works? It should work
    Alpesh

  • Is there a way I can permanently disable the security lock thing in System Preferences?

    Aside from logging and using the root account on a daily basis, is there a way to permanently be rid of the security lock thing in System Preferences?
    Yosemite has a bug (?) where if an Admin account has its password set to blank (empty), you can't remove the security lock...
    You can click it, it'll ask for Username and Password (Why?), and when you click on 'Unlock', it unlocks for a brief moment and instantly locks itself again...
    This is beyond infuriating. Do advise.

    Thanks for taking the time to reply.  However I'm quite aware that the sleep/wake button disables the screen.  Unfortunately, mea maxima culpa, I sometimes accidentally hit shuttle before I've pressed the sleep/wake button, often when I am trying to do more than one thing at once.  Sometimes I accidentally hit shuffle at other times too,eg when waking up the phone. 
    This is especially exasperating when listening to classical pieces with multiple movements.  I will look for an alternative music player for the iphone, as I don't think the default music application and I are a good match.
    Thanks again,
    Tim Blackwell

  • Error when publishing a supplier to ERP system

    Hello experts,
    I am implementing ESO 5.1, SP9 with Integration Package to a ERP 5.0 system.
    When trying to publish a vendor to the ERP system, I am getting the following error in ESO:
    "Unable to create the file: \Vendor__20110823172054719.xml"
    System provides no further information, and can't find anything on ESO logs.
    I hope you can point me in the right direction as to how I can get this issue resolved.
    Thanks!

    Hi,
    if you are using FTP, make sure the property is ftp.temp_dir is configured to point to the right path. if not, in the Integrated System Config object, make sure the Export Directory value is maintained. Make sure the path/folder you maintain here is on a shared drive so that it can be accessed from all application servers in the cluster.
    Thanks,
    Baski

  • LORD: ERP Quotation passing custom fields to ERP system

    Hi Gurus
    I extended the ERP quotation screen with custom fields which are same like ERP fields using AET and generated the setter and getter and methods for those fields in CRM system , but after entering the values into the custom fields and pressing enter the values are not getting retained , I mean after pressing enter it will communicate with ERP system using RFC call and return back to the CRM systme after that the custom fields are becoming empty, how can I track those values after coming back to the crm system .
    Thanks & Regards
    Madhu

    Hi Madhu,
    I am facing same problem.
    Could you please share your ideas?? It will be helpful to several guys.
    Thanks in advance,
    S.Meganadhan.

  • Using Flex to develop a ERP system

    I am trying to use Flex4 to  develop a ERP system. Now i am using Module technology. it's seem some  problem when dynamic loading module. Though I do a force reference  in main application. it works. I dont know why and how it happens.
    our demo site is http://demo.coolerp.com  and our support site is www.coolerp.com
    You can check the demo site http://demo.coolerp.com, it seems a little bit slow at the same time.
    Now we are usng the following arthictecture to implement ERP
    http://www.micsun.com/mainsite/show_list_content.jsp?parentId=1949746407&classId=195080214 8
    Any good idea  or good architecture for cool ERP, please come to me.
    BTW, welcome people knowing ERP or Flex knowledge to join free ERP develoment.
    tomby wu

    Hey Tomby,
    Good to know about your idea. I was thinking on similar line, although my motivation was only 'fun' to do this. However, I have good expertise over other RIA platforms like YUI, jQuery etc. Let me know if I can help you any where. I am available at [email protected]

  • Need suggestion on importing BC SET : UKM_DCD_CUST in SAP ERP system

    Dear Gurus,
    Client wants me to import BC SET : UKM_DCD_CUST into SAP ERP system. I have found BC SET : UKM_DCD_CUST in T code SCPR20.
    I have read most of the SCN discussion and got two way to import BC SET into ERP system as given below. But I need the appropriate way to do this. Can any one help me in this?
    1. SCPR20 -> Activate BC set -> create customizing request to import into another system as per link :Business Configuration Sets (BC Sets) and their use - Basis Corner - SCN Wiki
    2. Create TR in SE01 in 000 and import into required client  as per below proc:
    Usual procedure
    1) BC SETS will be attached to SAP note usually. Download it and unzip it , you will get a *.bcs file
    2) Call transaction SCPR20  BC set --> Upload In the dialog box that then appears, specify the files that you unpacked
    Import the set BC into a package that you have defined. activate it with the "Expert mode"
    3) You will also get a *.txt file with prog id , obj etc entries , then you have to go to SE09 and create a transport request in the source client of your Solution Manager system (client 000). Open the *.txt and copy the entries it contains into the transport request. Use transaction SCC1 to import the data in your Solution Manager client(s)
    Thanks,
    Anand Aseri

    2). Client copies bring the Customization data but not WorkBench . So you might have to do transport of copies from Old Dev to >New Dev.
    So you are saying that the system copy from Production will not bring Workbench data and I need to bring Workbench data by transports?
    *system copy from Production will bring Workbench data also, but when you do client copy from development system again on top of client which already has production customization, data and workbench requests, Production customization and data will be overwritten from development customization and data (it depends on the profile you choose for the client copy) *
    However  Development Workbench requests are more and also has ongoing development work which might not be available in production client and those (Ongoing development workbench requests) you need to import in new system as transport of copies after the client copy
    3). If you do system copy from Production and do client copy from dev...obviously Prod customization will be overwritten with Dev rite ?
    That's what I expect to happen,
    Ok, however, You might need to get Development Work too from the old dev system and don't forget about setting up of partner profiles in WE20.
    It's just a thought ,  Do you have testing client in Dev, if not,You can leave the production client in development system and use it as testing client.
    Create new client which is client copy of Old Dev and import WorkBench requests *
    Thanks,
    Arjun

  • Vat declaration - configuration in erp system

    Hello experts,
    I configured elster vat declaration in PI system as described in sap note 1293294.
    But what I have to configure at erp system? sap note 1293294 only describes that I have to select the Exchange Infrastructure transfer type in transaction FOTED1 in the ERP system (I could not imagine that thsi is all what I have to configure on erp side?).
    I could not find any documentation regarding the configuration in erp system? can you help me?
    we have PI 7.11 and ECC 6.02 System.
    Thanks and best regards
    Christopher
    Edited by: Christopher Kühn on Nov 11, 2009 4:37 PM
    Edited by: Christopher Kühn on Nov 12, 2009 9:07 AM

    Hello,
    you can find the solution to my question in sap nite 1414411 or under the link http://help.sap.com/saphelp_nw04s/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm
    best regards!
    Christopher

  • Transaction ME23N is not opening in a new session of ERP system

    Hi,
    In Solution manager, tcode -> STWB_2 (Test Plan Management - Test Organizer), when i select test plan and click on "Test Packages", then it will take me into the Test plan.
    Here I will select one of the packages and click on status analysis, in the Status analysis screen when i try to Execute and anything (for example here Display Purchase Order),
    I am getting a message as "Transaction ME23N will be started in a new session in ERP", however no such thing is happening.
    All RFCs are working fine, i tested in both Solman and ERP system.
    Can anyone help me out in solving this issue.
    Thank you,
    Siv

    Hi
    Do you have an RFC with current user settings with Trusted one.
    also do your user id has S_RFC authorization object so that you can do remote logon.
    goto sm59 in solman and choose the RFC pointing towards ECC etc and perform remote logon
    Hope it helps and solv ur problem
    Regards
    Prakhar
    Edited by: Prakhar Saxena on Aug 20, 2010 2:01 AM

  • How to active a PDF Based Form in ERP System

    Hi ,
    One of user facing problem "When I try to active a PDF Based Form in ERD, I got the following error: u201CINVALID http CONNECTION : ADSu201D
    Please can anyone help me in this ,what should i do and how to proceed it slove this issue.
    Thanks and Regards
    Brijesh Prasad

    You need
    - an application server JAVA with Adobe Document Service installed
    - you need to configure the connection between that Java instance and your ERP system
    https://www.sdn.sap.com/irj/sdn/adobe
    Markus

  • How to count through put of ABAP Proxy in ERP system

    Hi PI expert.
    At the moment, I am looking for the way to find out
    the number of processed ABAP proxy and also the combination
    of sender/receiver in ERP system.
    Since the number of processed message is a lot,
    I cannot used SXI_MONITOR to count the number and to check
    the combination.
    if there any good way, or report that can be used ?
    Best Regards
    Keiji Mishima

    Hi VJ
    thanks for the information.
    Let me try whether it works.
    Best Regards
    Keiji

Maybe you are looking for