WSRP producer on WLS - license issues

Hello,
according to docs, WSRP producers can be run on plain WebLogic Server, no need for Portal:
[url http://e-docs.bea.com/wlp/docs100/federation/Chap-Working_With_Producers.html#wp1010271]http://e-docs.bea.com/wlp/docs100/federation/Chap-Working_With_Producers.html#wp1010271
However, in order to extend the domain, some templates (wsrp-simple-producer.jar) from a portal installation are needed, they are not part of the plain WLS installation. Maybe I could copy the scripts from our WLP to WLS (I haven't tried yet, maybe some JARs are needed too).
My question is, whether this is legal, or if I need to buy a WLP license for each WLS modified this way.
Thank you,
Martin.

The intended way to do this is use the Portal installer (portal license
not required). Then build your domains as specified on e-docs. Only the
WLS license will be checked at runtime.
Hope this helps,
Nate
Martin Pl wrote:
Hello,
according to docs, WSRP producers can be run on plain WebLogic Server, no need for Portal:
[url http://e-docs.bea.com/wlp/docs100/federation/Chap-Working_With_Producers.html#wp1010271]http://e-docs.bea.com/wlp/docs100/federation/Chap-Working_With_Producers.html#wp1010271
However, in order to extend the domain, some templates (wsrp-simple-producer.jar) from a portal installation are needed, they are not part of the plain WLS installation. Maybe I could copy the scripts from our WLP to WLS (I haven't tried yet, maybe some JARs are needed too).
My question is, whether this is legal, or if I need to buy a WLP license for each WLS modified this way.
Thank you,
Martin.

Similar Messages

License Error in WSRP Producer

I am evaluating WSRP Producer with AL .NET Accelerator. When I try to register my instance of WSRP Producer in SharePoint using WSRP Consumer web part, I get the following error. I have confirmed that C:\bea\license.bea exists and confirms a proper evaluation license. Does anyone know what could be the problem? Thanks in advance.
Recommendations follow:
Missing, invalid, or expired license for AL .NET Application
Accelerator-1.1-WSRP Producer.
RECOMMENDATION: Please make sure the license.bea file in the BEA home
directory contains valid license entries for this
product/release/component.
More Detail:
WSRP Producer: license error, license sessions validation failed!
FATAL: Missing, invalid, or expired license for AL .NET Application
Accelerator-1.1-WSRP Producer.
Recommendation:
WSRP Producer: license error, license sessions validation failed!Here are my steps:
1. Install ALDotNetWSRPProducer.exe
Using default local IIS website
2. Install ALDotNetPortletToolkit.exe
3. Create a sample WSRP Portlet in Visual Studio
3. Publish the portlet and modify wsrp-producer.xml. I added the following section under <portlets>:
          <portlet>
               <handle>finportal</handle>
               
               <url id="view">http://myserver.com/wsrp/PortletPage.aspx</url>
               <expiration-cache>10</expiration-cache>
               <supported-locale>en</supported-locale>
               <description lang="en">Login Page</description>
               <display-name lang="en">Login</display-name>
               <supports>
                    <mime-type>text/html</mime-type>
                    <portlet-mode>
                         <name>wsrp:view</name>
                         
                    </portlet-mode>
               </supports>
               <portlet-info>
                    <title lang="en">Login Page</title>
                    <short-title lang="en">Login</short-title>
               </portlet-info>
               <portlet-properties>
                    <property name="LastAccessed" type="xs:dateTime"/>
                    <property name="PreferredFormOfAddress" type="xs:string" defaultValue="Mr."/>
               </portlet-properties>
               <user-profile>
                    <item>UserProfileName/PropertyName</item>
               </user-profile>
          </portlet>---
Regards,
Victor Barkalov
Edited by vbarkalov at 05/26/2008 7:10 AM

Creative Cloud Reverts to Trial Mode
http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

Transitioning WSRP producer registrations from development to production

Hi there,
we're currently struggling a bit with the notion of producer registrations vs. the need for separating our development environment from production.
Here's what we do:
1. We create a producer connection in JDeveloper, but using the development server's portlet deployment as WSDL endpoint
2. We then continue to create some pages, instantiating portlets from the newly created producer as we go along
3. We deploy that to our development environment. All is well!
4. We (at some time in our projects lifecycle) try to go ahead and deploy to production. For that, we'd like to change the URL of the producer connection while preserving all the pages we composed (at design time), so far.
5. First, we simply change the producer url in connections.xml before starting to predeploy. -> Error, since the ID of the registration handle included in our local MDS doesn't match anything that exists in the actual production environment.
6. Next, we try to predeploy/deploy the EAR file as is, then change the actual producer URL using WLST (setWSRPProducer, registerWSRPProducer, degisterWSRPProducer, etc) or the Fusion Enterprise Manager. -> Doesn't work either, since deregistration/registration invalidates all the existing portlet instance files we have in our original MDS/MAR file.
So here's my question: What are best practices you can recommend when working with WSRP producers and a (clean) separation between development, testing and production environment? Are design-time producer registrations/portlet instantiations even possible in such a context? Should we perhaps use the preference data migration tool for migrating consumer registrations from one environment to the other? Even when one of those environments is unstable (dev) and the other supposed to be stable (production)? Or should we (at the portlet-level) disable consumer registrations entirely? If yes: How to do this in WebCenter?
Help is deeply appreciated :-)!
Cheers,
Chris
Edited by: ckesselh on Nov 3, 2011 8:14 AM

Hi Chris,
You raise good questions that I would love to explore further as well and it would be great if you could let me know what deployment approach you have come up with. Some of this is covered under section http://docs.oracle.com/cd/E17904_01/webcenter.1111/e12405/wcadm_imp_exp.htm and http://docs.oracle.com/cd/E17904_01/core.1111/e10105/deployer_role.htm which I am sure you have already reviewed. I have a much simpler problem with getting a Null Exception Error every time that I simply try to register a WSRP Producer with the sample .Net service - have you ever tried that and have come across the same issue?
Thanks,
Michael.

Federated Portal Network Blues - can not connect to WSRP producer

Hi,
I'd like to embed some JSR-168 portlets into my SAP EP but fail immediately when trying to add the WSRP content producer.
I have a setup of two portals, one is SAP EP 2004s (SP13) and the other a JBoss Portal v2.6.4. I'd like to share my JBoss portlets to SAP and vice-versa for evaluating the interoperability of SAP systems with the real world.
But alas, I'm struggling on the basic setup of my SAP EP...
Here is my problem:
When I configure a WSRP-producer it all seems to work right but I can not connect to it, e.g. I can not register and test the connection. The connection test fails because of :
Producer object was found
Could not retrieve the WSDL file; the handshake URL may not exist or may be invalid
The SAP systems runs behind no proxy at all, so this can't be the issue. When testing the same WSRP producer URL from JBoss portal it all works fine. The URL I used was a WSRP test site from Oracle, see [http://portalstandards.oracle.com/portletapp/portlets?WSDL].
Does anyone have a glue what might be missing on my SAP Portal? The standard log gives me no clues at all I've been tail minus effing the thing for hours...
The SAP documentation - SAP Library, various E-Learning things - couldn't solve the problem for me...
Thanks for your support!
regards,
Christian

Hi,
Unfortunately I do not have any experience with connecting to JBoss, but perhaps this document can help you analyzing your issue:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/703cfbbd-e85e-2a10-00a3-ecd502c08e82
Good luck!
Best regards,
Jan Laros
PS. Please award points when helpfull.

Java.lang.ClassCastException: com.bea.wsrp.producer.descriptor.DefaultPortl

Hi All,
I am getting the java.lang.ClassCastException: com.bea.wsrp.producer.descriptor.DefaultPortletDescriptor
while loading a portlet from a portal.
I could see the jar for this class is wsrp-producer.jar.Is this due to a jar issue.I cant debug as it needs the java source files for the wsrp-producer.jar.Can anyone help us where we can get the source java files for the classes in wsrp-producer.jar.
The weblogic server is weblogic-10.3.2
Thanks in Advance
Edited by: user7437632 on Oct 5, 2012 4:55 AM

Hi All,
I am getting the java.lang.ClassCastException: com.bea.wsrp.producer.descriptor.DefaultPortletDescriptor
while loading a portlet from a portal.
I could see the jar for this class is wsrp-producer.jar.Is this due to a jar issue.I cant debug as it needs the java source files for the wsrp-producer.jar.Can anyone help us where we can get the source java files for the classes in wsrp-producer.jar.
The weblogic server is weblogic-10.3.2
Thanks in Advance
Edited by: user7437632 on Oct 5, 2012 4:55 AM

Sending cookies to WSRP producer

Hi,
We need to forward a cookie to the WSRP producer for each interaction, we are using WLP 10.2 consumer and WLS 8.1 configured as a producer.
As i understand from another posts, doing this with interceptors is not possible unless some patches are installed.
Can someone specify which are these patches and if they are available also for WLP 10.2 ( not only for 10.3 (.
Many thanks,
Andrei

Hello Andrei,
I believe the patches you need are available for WLP 10.2; you will need to contact support and ask for the patches related to CR380227 and CR383977 for WLP 10.2.
Kevin

Adobe acrobat 9 pro installation/licensing issues

I installed my licensed copy of Acrobat 9 on a new Windows 7 system. Acrobat launched but would not open files and shuts down on attempt. Message is "Licensing for this product has stopped working" with subtext "You cannot use the product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help."
I doubt any of you have a solution, so I simply remark on what transpired as a warning and complaint:
1. I went to Adobe databse and found that a patch was provided to correct installations/licensing problems on windows 7. I downloaded it and installed per instructions. It did not resolve the problem.
2. I uninstalled/reinstalled several times. no resolution.
3. I called customer support and was outsourced to someone who knew little and first sent me to a kb article having to do with 'expired licensing' even though I clearly informed them that the message and the fact had nothing to do with expired licenses. They finally referred me to kb405970 on "Licensing has stopped working". I tried all of the applicable solutions (methods 1-6) and none of them worked. Now I will have to wait until tomorrow (though I had pressing work to do today) to contact support again. I fear I will get another outsourced tech who knows little and wastes more of my time. Such is Adobe's way of supporting paid and licensed product users.
I understand and sympathize with Adobe's wishes to protect its products from piracy. However, I expect and paid for a product which works on major and supported operating systems like windows 7. I also understand that if MS or Mac put out a new OS or version, it may require certain adjustments or updates on Adobe's part. What I do not understand (or have patience with) is that 1) Adobe failed to provide a patch that works; 2) that it then sends me to an outsourced customer service tech who didn't have the knowledge to correct the problem and gave me the wrong information to begin with*. What I finally got was the kb article with a series of multi-step instructions for several methods, none of which worked. This is an unprofessional and unethical response to those of us who have paid for our product and expect it to work under reasonable conditions in a supported environment. This is not an acceptable good-faith effort to resolve issues for which Adobe should take full responsibility.
If any of you do happen to have a real solution (or had a similar problem) do let me know....
*The first thing the outsourced tech wished to do was get onto my machine via a remote connection, before anything was tried other than giving them the error message and have them provide me with the wrong information. It became clear that this person had less knowledge than I do (which isn't saying much) and there was no way I was going to permit a clueless techie to crawl around in my machine and fiddle with settings. That is simply asking for trouble. I'm perfectly capable of opening panels and following instructions myself. DC should be the last thing tried; not the first.

Bill, I tried as you suggested - installed every update from 9.1 through 9.3.4. The 'license not working message persists'. The only change was that now Acrobat will not close and must be forced to shut down from the taskbar menu. I appreciate the suggestion though.
Called Adobe (Manila) again, within the hours given on their contact page for installation and licensing issues, and was told "It's Sunday, nobody here can help you". Finally, after an hour of hammering got them to get me a supervisor (their script says to tell the customer there "Is no supervisor available on Sunday" - Finally the "supervisor", Alvin, suggested I need a new serial number and left me on the line while he called someone else to get on. Cameback and informed me that he couldn't get one, I'd have to call Monday (how's that for having solutions?) Result: wasted more time and had more delay on my project.
Conclusion: Adobe has become obsessed and 'piranoic' about piracy and licensing to the extent that they put that first and client/customer needs second (if that). After reading a lot of online 'Adobe Sucks' forums, I'm inclined to believe Adobe is shooting itself in its own foot and is not going to be a reliable method of presentation/document transmission in the future - service and support is an integral part of software and other concerns such as piracy or licensing need to be transparent to legitimate users. Sad that they spend so much time on this, when they need to be fixing real problems. As well, these outsourcing Philipines companies are poor substitutes for good support - they are so scripted and obsessed with regulations over solutions that it is clear that only the most persistent users will get anywhere with them. As a frontline of contact with after-sale clients, they are going to cost Adobe a lot of potential business in the future, whatever their short-term savings. Too bad. Adobe used to be a leader in the market.
Next round: Calling Manila again this am. to be continued...

ORA-20001: The printing engine..Is this related to a BIP licensing issue?

Hello all,
The error "ORA-20001: The printing engine could not be reached because either the URL..." happens in 2 cases:
<pre>
1. When our BIP is down or being bumped
2. As an APEX administrator, in workspace environment settings, the print server is set to OFF.
</pre>
I'm thinking that this is a licensing issue but I need some clarification on what is causing the error, because all we are trying to do is bring up a PDF report that a user can open or save. BIP is not involved at this point. Is it because the report was developed using BIP that APEX needs BIP up? How does APEX even know the report was developed using BIP? Were are using APEX 3.2.1.00.12 and BIP 10.1.3.4.1
The error happens when a user clicks on a PDF icon that calls an "After Submit Process". The following is the code and the report that was created in BIP is loaded into APEX with a "Named Columns (RTF)" layout type.
Alex.
declare
l_xml                         clob;
l_template                    clob;
l_request_blob                blob;
l_response                    blob;
begin
   ...call up a stored proc to populate l_xml with report data
-- Fetch template
select page_template
into   l_template
from   apex_030200.wwv_flow_report_layouts
where flow_id = :app_id
and    report_layout_name = 'pdf_report';
-- Convert CLOB to BLOB
l_request_blob := wwv_flow_utilities.clob_to_blob(l_xml);
-- Call unsupported and undocumented APEX function
l_response :=
    apex_030200.wwv_flow_print_util.convert(
      p_report_data   => l_request_blob,
      p_template      => l_template,
      p_template_type => 'rtf',
      p_output        => 'pdf'
-- Set correct mime type and download response
owa_util.mime_header('application/pdf', false);
htp.p('Content-length: ' || dbms_lob.getlength(l_response));
htp.p('Content-Disposition: attachment; filename="Claim_details.pdf"');
owa_util.http_header_close;
apex_application.g_page_text_generated := true;
apex_application.g_unrecoverable_error := true;
wpg_docload.download_file(l_response);

See, http://www.oracle.com/technetwork/developer-tools/apex/configure-printing-093060.html
http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/otn_install.htm#CBHBJDDE
(excerpt copied here, for you convenience)
7. Enabling Network Services in Oracle Database 11g
By default, the ability to interact with network services is disabled in Oracle Database 11g release 1 (11.1). Therefore, if running Oracle Application Express with Oracle Database 11g release 1 (11.1), use the new DBMS_NETWORK_ACL_ADMIN package to grant connect privileges to any host for the FLOWS_030100 database user. Failing to grant these privileges results in issues with PDF/report printing, specifically, you will get the following error message:
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
Follow the steps mentioned in the Oracle Application Express Installation Guide, Enabling Network Services in Oracle Database 11g. Also refer to the troubleshooting section in case you receive an ORA-44416: Invalid ACL error after running the previous script.

REgarding licensing issues involvng 'Computername' and the use of UpperCase4 vs Lowercase Letters

Does any one know if it would cause problems for the Office 365 software license to be displayed as licensed to an ALL CAPS name like 'MY-FAVORITE-PC' but the computer itself shows the computer name to be 'my-favorite-pc"?
If it does, which one should I change? A couple of people here have had this same problem (which usually occurs when they change to using a different PC for their account) I have to Deactivate their Old PC namer and then install the licnse to
their New OC using whatever name it has.
On more than one system, this has resulted in various odd "failure to contact Microsoft server" issues when activating. The problem continues for 7 days and then their copy of Office starts showing reed warning bards and eventually gets totally
unusable.
However, if I uninstall the office, deactivate the license, and reinstall it once again, it install just fine and acts ok but invariably at some point, the same thing occurs.
On one of them I noticed the difference in the case of the letters used in the computer name and the license name. On others I am wondering about various software add ins for Outlook or some other 3rd part application causing the problem. Whatever
it is, it gets extremely annoying. Officer 365 apparently must run an activation sequence almost constantly while Office 2010 (and I presume 2013) ran it once and were done with it.
Searching Google I have found too many possible reasons along with a lot of people who have had the same problems but no one seems to have the 100% solution. This has only started happening since we switched to Office 365 and only
seems to occur on systems that are changed out to different ones with the same User's 365 Account which is in good standing and has 5 available licenses of which only one is in use.
In the case of the caps vs lowercase I also wonder if changing the name to CAPS on their PC would create additional problems on its own?

Hi Questorfla,
For the Office 365 software license issue, I recommend you can post in dedicated Office 365 Forum to get a better response:
http://community.office365.com/en-us/f/148.aspx
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

Namespace Error, while creating proxy for a WSRP producer(Created on Exo)

Hi ,
I have implemented and deployed WSRP producer on Exo portal container. When I was trying to create proxy for the same in weblogic portal 10.2 its giving me the following error. Upon submiting the WSDL URL
!ENTRY com.bea.wlp.eclipse.common 4 4 2008-12-08 13:46:27.540
!MESSAGE NAMESPACE_ERR
!STACK 0
org.w3c.dom.DOMException: NAMESPACE_ERR
     at weblogic.xml.domimpl.ElementNSImpl.<init>(ElementNSImpl.java:74)
     at weblogic.xml.saaj.SOAPElementImpl.<init>(SOAPElementImpl.java:40)
     at weblogic.xml.saaj.SaajDocument.createElementNS(SaajDocument.java:63)
     at com.bea.wsrp.util.DomUtils.createChildElement(DomUtils.java:386)
     at com.bea.wsrp.util.DomUtils.addChildElement(DomUtils.java:406)
     at com.bea.wsrp.util.DomUtils.addChildElement(DomUtils.java:371)
     at com.bea.wsrp.bind.serviceDescription.GetServiceDescriptionRequest.writeTo(GetServiceDescriptionRequest.java:40)
     at com.bea.wsrp.client.ProducerAgentImpl.getServiceDescription(ProducerAgentImpl.java:129)
     at com.bea.wsrp.client.ProducerAgentImpl.getServiceDescription(ProducerAgentImpl.java:80)
     at com.bea.wsrp.client.ProducerAgentImpl.getServiceDescription(ProducerAgentImpl.java:68)
     at com.bea.wsrp.client.ProducerAgentImpl.getServiceDescription(ProducerAgentImpl.java:57)
     at com.bea.wlp.eclipse.wsrp.portletbuilder.wsrp.ProducerAgent.getServiceDescription(ProducerAgent.java:99)
     at com.bea.wlp.eclipse.wsrp.portletbuilder.wsrp.ProducerAgent.<init>(ProducerAgent.java:57)
     at com.bea.wlp.eclipse.wsrp.portletbuilder.wsrp.ProducerAgent.<init>(ProducerAgent.java:45)
     at com.bea.wlp.eclipse.wsrp.portletbuilder.wizard.wsrp.SelectProducerPanel$ProducerInfoRunner.run(SelectProducerPanel.java:690)
Could any one help me to solve this problem.
Thanks & Regards,
Naresh

Hi Nate,
Please find the following wsdl.
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions targetNamespace="http://localhost:8080/wsrp/services/Version" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://localhost:8080/wsrp/services/Version" xmlns:intf="http://localhost:8080/wsrp/services/Version" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">

<wsdl:message name="getVersionRequest" />
<wsdl:message name="getVersionResponse">
<wsdl:part name="getVersionReturn" type="soapenc:string" />
</wsdl:message>
<wsdl:portType name="Version">
<wsdl:operation name="getVersion">
<wsdl:input message="impl:getVersionRequest" name="getVersionRequest" />
<wsdl:output message="impl:getVersionResponse" name="getVersionResponse" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="VersionSoapBinding" type="impl:Version">
<wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http" />
<wsdl:operation name="getVersion">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="getVersionRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://axis.apache.org" use="encoded" />
</wsdl:input>
<wsdl:output name="getVersionResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://localhost:8080/wsrp/services/Version" use="encoded" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="VersionService">
<wsdl:port binding="impl:VersionSoapBinding" name="Version">
<wsdlsoap:address location="http://localhost:8080/wsrp/services/Version" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Thanks & Regards,
Naresh

Have the Adobe Muse CC (2014) licensing issues been resolved?

Have the Adobe Muse CC (2014) licensing issues been resolved?
I am patiently waiting for some word on whether I can go ahead a install the new version of Muse CC (2014) software on my systems without running into the quagmire that so many are experiencing. I simply can't afford to run the risk that I will be stuck with a "trial version" for the next 30 days without some assurance from Adobe that they will be able to solve the problems in that time frame. It would be nice if adobe would send out an email that explains the situation to all of it's users so we know what's going on and when the issue is resolved. Collectively we all pay a lot money for these "updates", so I don't think it's to much to ask.
Kind Regards,
wrgould
PS: Please reference this forum discussion - Muse CC 2014 wants Serial Number, though i pay monthly for muse

A screenshot of the error when a site is opened. I've reinstalled, restarted.. etc. Thanks! J

Acrobat 9 - Upgrade Computer OS from Windows XP to 7 - Licensing Issues?

I have a Lenovo laptop that came with Win XP and Acrobat 9 Standard pre-installed, but they gave me the Acrobat installation CD with product key on the back. So after I wipe the HD and insall a new OEM version of Win7 SP1, can I simply install Acrobat from the old CD using the product key, or will I have licensing issues from the re-installation? -- JClarkW

>>The only issue might be if there had been an activation and you did not deactivate it first.<<
I'm sure I would have activated it, to get updates if nothing else, but how do I tell? If so, how do I deactivate it before the OS replacement? -- JClarkW

Please clarify the following license issue

Hello
Please clarify the following license issue
Oracle 10g se license requirement while using a power 6 P520 machine with 2-core 4.2 GHz processor card,4 memory DIMM slots. Are we entitled for paying for one oracle 10g SE license?
many thanks in advance

When you read through that thread, did you see where I linked to and quoted the licensing definitions
Processor: shall be defined as all processors where the Oracle programs are installed and/or running. Programs licensed on a processor basis may be accessed by your internal users (including agents and contractors) and by your third party users. For the purpose of counting the number of processors which require licensing for a Sun UltraSPARC T1 processor with 4, 6 or 8 cores at 1.0 gigahertz or 8 cores at 1.2 gigahertz for only those servers specified on the Sun Server Table which can be accessed at http://oracle.com/contracts , “n” cores shall be determined by multiplying the total number of cores by a factor of .25. For the purposes of counting the number of processors which require licensing for AMD and Intel multicore chips, “n” cores shall be determined by multiplying the total number of cores by a factor of .50. For the purposes of counting the number of processors which require licensing for all hardware platforms not otherwise specified in this section, a multicore chip with "n" cores shall be determined by multiplying "n" cores by a factor of .75. All cores on all multicore chips for each licensed program for each factor listed below are to be aggregated before multiplying by the appropriate factor and all fractions of a number are to be rounded up to the next whole number. When licensing Oracle programs with Standard Edition One or Standard Edition in the product name, a processor is counted equivalent to a socket.
It appears that you fall under the "not otherwise specified" category because you're not dealing with an UltraSPARC T1 (multiplier 0.25) or an AMD/ Intel chip (multiplier 0.5) so your multiplier would be 0.75.
0.75 * 2 cores = 1.5 processors which would have to be rounded up to 2 processors. If you had 4 total cores, you would only need a 3 processor license.
Justin

Unable to register WSRP producer

We develop portlets for Oracle Application Server Portal.
While trying to register WSRP producer we get error
500 Internal Server Error
java.lang.NoClassDefFoundError
at oracle.xml.xslt.XSLSAXPrintDriver.printAttributes(XSLSAXPrintDriver.java:460)
at oracle.xml.xslt.XSLSAXPrintDriver.startElement(XSLSAXPrintDriver.java:393)
at oracle.xml.xslt.XSLEventHandler.reportStartElement(XSLEventHandler.java:267)
at oracle.xml.xslt.XSLEventHandler.characters(XSLEventHandler.java:863)
at oracle.xml.xslt.XSLCopy.processAction(XSLCopy.java:188)
at oracle.xml.xslt.XSLNode.processChildren(XSLNode.java:480)
at oracle.xml.xslt.XSLTemplate.processAction(XSLTemplate.java:205)
at oracle.xml.xslt.XSLApplyTemplates.processAction(XSLApplyTemplates.java:242)
at oracle.xml.xslt.XSLApplyTemplates.processAction(XSLApplyTemplates.java:142)
at oracle.xml.xslt.XSLNode.processChildren(XSLNode.java:480)
at oracle.xml.xslt.XSLCopy.processAction(XSLCopy.java:178)
at oracle.xml.xslt.XSLNode.processChildren(XSLNode.java:480)
at oracle.xml.xslt.XSLTemplate.processAction(XSLTemplate.java:205)
at oracle.xml.xslt.XSLApplyTemplates.processAction(XSLApplyTemplates.java:242)
at oracle.xml.xslt.XSLApplyTemplates.processAction(XSLApplyTemplates.java:142)
at oracle.xml.xslt.XSLNode.processChildren(XSLNode.java:480)
at oracle.xml.xslt.XSLTemplate.processAction(XSLTemplate.java:205)
at oracle.xml.xslt.XSLStylesheet.execute(XSLStylesheet.java:581)
at oracle.xml.xslt.XSLProcessor.processXSL(XSLProcessor.java:318)
at oracle.xml.jaxp.JXTransformer.transform(JXTransformer.java:387)
at com.sun.xml.rpc.server.http.ea.WSDLPublisher.publish(WSDLPublisher.java:58)
at com.sun.xml.rpc.server.http.ea.JAXRPCServletDelegate.doGet(JAXRPCServletDelegate.java:284)
at com.sun.xml.rpc.server.http.JAXRPCServlet.doGet(JAXRPCServlet.java:76)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermindhttp://Oracle Application Server Containers for J2EE 10g (10.1.2.0.2).server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.webdb.wsrp.server.ContextFilter.doFilter(Unknown Source)
at com.evermindhttp://Oracle Application Server Containers for J2EE 10g (10.1.2.0.2).server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at oracle.webdb.wsrp.server.ContextFilter.doFilter(Unknown Source)
at com.evermindhttp://Oracle Application Server Containers for J2EE 10g (10.1.2.0.2).server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
at com.evermindhttp://Oracle Application Server Containers for J2EE 10g (10.1.2.0.2).server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermindhttp://Oracle Application Server Containers for J2EE 10g (10.1.2.0.2).server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermindhttp://Oracle Application Server Containers for J2EE 10g (10.1.2.0.2).server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermindhttp://Oracle Application Server Containers for J2EE 10g (10.1.2.0.2).server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermindhttp://Oracle Application Server Containers for J2EE 10g (10.1.2.0.2).util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
portlets that were already registered work fine, but when trying to update their producers we get the same error.
Versions:
Oracle Application Server 10g Release 2 (10.1.2.0.2) for Microsoft Windows x86
Oracle Database 10g Release 1 (10.1.0.2) Enterprise Edition for Microsoft Windows (32-bit)
We use WSRP 2.0.
We suppose that problem appeared after unsuccessfull attempts to deploy portlet which use Oracle ADF libraries.
While trying to deploy that portlet we've got java.lang.outOfMemoryError, and logs of WSRP instance contained no errors.
Any help would be appreciated.
Thanks in advance,
Yelena.

portlets that were already registered work fine, but when trying to update their producers we get the same error.
Versions:
Oracle Application Server 10g Release 2 (10.1.2.0.2) for Microsoft Windows x86
Oracle Database 10g Release 1 (10.1.0.2) Enterprise Edition for Microsoft Windows (32-bit)
We use WSRP 2.0.
We suppose that problem appeared after unsuccessfull attempts to deploy portlet which use Oracle ADF libraries.
While trying to deploy that portlet we've got java.lang.outOfMemoryError, and logs of WSRP instance contained no errors.
Any help would be appreciated.
Thanks in advance,
Yelena.--
Edited by: AMN on Jul 2, 2009 12:41 AM

9.3.0.1 Permanent Licensing Issue

I am trying to use an old VMware image that contains Planning 9.3.0.1, but I am having licensing issues.
Steps taken already
1) I went to http://licensecodes.oracle.com/downloads/HS9_MasterLicenseFile.zip and download the new license file.
2) Then went to the license manager (LMtools.exe) and was successful starting and stopping the license server and re-reading the license.
3) Then went to the Configuration Utility and Activated the Product to change the Deployment ID to "Temp-0004" within System 9 BI+, Analytical Services, Financial Management and Planning.
Where I see the errors
1) In my debugging of the issue, I tried starting the Hyperion Planning via command line. Planning starts up fine but no longer accepts the requests.
Error Text: "CLS0000017 No unexpired licenses are available for your product. No further requests to the server will be processed."
2) Also within workspace when I go from Navigate -> Application -> Planning -> PlanApp1 I receive the follow error when I try to login.
Error Text: "A problem with Hyperion System 9 Planning license was encountered. Please see the log for details."
Any suggestions?

I'm attaching the instructions I put together about a year ago -- your mileage may vary:
Instructions to update the 9.3 Demo Drives to new license files.
copy HS9_MasterLicenseFile.lic C:\HYSL\common\LicenseServer\Licenses
move C:\HYSL\common\LicenseServer\Licenses\NA_HYSL_Demo_Disk_beckett_01_18_2007_ga.lic C:\HYSL\common\LicenseServer\NA_HYSL_Demo_Disk_beckett_01_18_2007_ga.lic.bak
Copy HS9_SA_MasterLicenseFile.lic C:\HYSL\common\LicenseStandalone\Licenses
move C:\HYSL\common\LicenseStandalone\Licenses\NA_HYSL_Demo_DiskSA_beckett_01_18_2007_as.lic C:\HYSL\common\LicenseStandalone\NA_HYSL_Demo_DiskSA_beckett_01_18_2007_as.lic.bak
Execute the Hyperion System 9 Foundation / Configuration utility
Active the following Products using the default Deployment ID which is *
Hyperion System 9 BI+
Analytic Services
Hyperion System 9 Financial Management
Hyperion System 9 BI+ Enterprise Metrics
Hyperion System 9 Performance Scorecard
Strategic Finance Server
Planning
Verify the DEPLOYMENTID in C:\HYSL\BIPlus\common\config\license.properties
Ensure the DeploymentID matches below exactly.
     #License keys for BI+
     #Wed Feb 13 21:05:27 EST 2008
     licenseServerPath=@demodrive
     DeploymentID=*
     licenseStandalonePath=C\:\\HYSL\\common\\LicenseStandalone\\Licenses
Reboot
Start Planning
Login
If Login provides license error, perform below steps:
1) Run: C:\Program Files\Microsoft SQL Server\80\Tools\Binn\isqlw.exe
2) Connect as Windows Authenticated User
3) In SQL window:
use pln
update HSPSYS_PROPERTIES set PROPERTY_VALUE='*' where PROPERTY_NAME like 'DE%';
4) Highlight the two lines and press F5 to execute the SQL update.
Regards,
-John

WSRP producer on WLS - license issues

Similar Messages

Maybe you are looking for