WSUS download updates but does not store on the drive

Hi everyone,
I have my WSUS suddenly stop copying downloaded files to its storage. it still using up maximum bandwidth but just does not save the update. Screenshot below show 187 updates needed, 24,154 MB have been downloaded. The 24,154 MB will then increase to about
24,500 MB and then reset back to 24,154 MB.
This is really frustrating for me since I almost ready to roll out. Thank you very much

Hi,
Please make sure that the WSUS folder has enough space and permission.
Here is an article about WSUS server settings,
http://technet.microsoft.com/en-us/library/cc708545(v=ws.10).aspx
Besides, is there any warning or error in the event log of the WSUS server?
Best Regards.
Steven Lee
TechNet Community Support

Similar Messages

IWeb publishes updates but does not upload in the FTP

HELP!
I have a 'tried-tested-true' website that's been on the internet for 10 years. It's been updated over the years but needed much more as of today.
The updates perfectly publish within iWeb [3.0.4]. The FTP uploads the site, but when I check it on the internet [Safari 6.2.3], the former version appears.
I proceeded to troubleshoot by renaming the website and re-mounting the pages. Also, renaming the pages, but after several attempts of uploading each newer version, all efforts were to no avail. It has taken me a full day without results. That is, the original website remains on the internet, which is very outdated.
I have run out of troubleshooting ideas. All of my other websites have not had this problem. There was an issue this week with the ISP Domain Host services not connecting my site. I contacted them, but have had no response. However, I thought I would try connecting again today in case they sorted out their connectivity issues. I am able to connect to their server. I have good reason to believe the FTP is uploading the updated directory files, but for some reason when it comes to viewing the site on the internet, au contraire.
Not sure if this is an iWeb problem or my ISP domain hosting services having issues with connectivity. Whatever, it is very perplexing to me as to what to do next after the extensive amount of time I have taken troubleshooting.
I repeat myself when I say, 'HELP!'

Okay, I understand what you are referencing. I am publishing my websites to the path of 'Users'-Documents-Website Documents.
Below is a screen shot of the folder my Websites are located. Is this what you are referencing? It is Site 2 that is having issues with uploading to the domain host server of my ISP. All the other sites have been uploaded successively.
I use FileZilla as my FTP server and it has been excellent. I have tried CyberDuck, et al. FZ works perfectly well indicating all that one needs to know while uploading. If my other websites were causing the same issues, then it would mean FTP issues.
However, I believe I am on the same track you are referencing with regards to my published website is in the appropriate location on my HD. I stand to be corrected.
I believe by my contacting the Forum and reading your information that I am following protocol as I have always done with my 4 websites that upload properly. As I continue the discussion, it is becoming evident the issue is with the Domain Host server, which is not a problem to post on this Forum.
However, I posted my issue just in case it was an iWeb issue or my not following protocol correctly to publish a website. From what I am gleaning with your information, I am following protocol. Repeating myself when I say it appears to be the aforementioned server. I have contacted them again about their Domain Host server but no response as yet.
If what I am presenting to you is the correct protocol I have in place at my end, I thank you for taking the time to assist me. By doing so, I believe I will be able to determine it is not an iWeb publishing issue [mostly because all my websites are not experiencing this problem], nor is it the FTP server,FileZilla, but the Domain Host Server.
As mentioned above, here is the folder where my websites are located.
I so appreciate your assistance.

When trying to update apps i keep getting billing method incorrect(this is on iphone 4s) i hsve tried this store,apple id,view id,payment info but does not offer me the none option,i can npt update my phone any ideas anybody please?

when trying to update apps i keep getting billing method incorrect(this is on iphone 4s) i hsve tried this store,apple id,view id,payment info but does not offer me the none option,i can npt update my phone any ideas anybody please?

If you dont have none option then you must own itunes some money. So you have to enter the payment like a itunes giftcard. you can contact itunes by email by going to expresslane.apple.com

IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE

IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE

iPod not recognized in 'My Computer' and in iTunes for Windows

Clicking links in apple mail opens firefox, but does not go to the actual link.

Clicking on links in Apple Mail opens/switches to Firefox, but does not go to the page of the actual link. It just loads the homepage or stays on whatever page I was on before. Links work fine when I switch my default browser to Safari, so I think the problem is with Firefox, not Mail. Downloading the latest version of Adobe Flash seemed to temporarily fix the problem, but it stopped working within a day or two.

Here's a link to a thread that solved the problem for me:
http://discussions.apple.com/thread.jspa?messageID=12552345&#12552345
The culprit was that the Flash plugin needed updating for FF. That was it.
Go to Firefox; Preferences; General (tab); Add-ons; Manage Add-ons; Plugins.
I clicked on Find Updates and immediately updated the Flash plugin.
Hope this helps others.

HT201272 Season pass notice does not always download. It does not appear in the purchased items. I am responding to an email stating 'this week's TV show is ready for download'.

Season pass notice does not always download. It does not appear in the purchased items. I am responding to an email stating 'this week's TV show is ready for download'. Any suggestions?

Been having the same problems all week. And am got a generic, not-at-all-helpful response from my initial inquiry with support, then absolutely no response to my follow-up requests. There seem to be a fair number of people posting this problem, so not sure why we're being ignored.
Was able to eventually download the episodes manually via the 'purchased' link, but it's about 10 more steps than normal.
Also noticed that itunes isn't recognizing my purchases at all, not just season passes. If I go to a page of a show where I buy episodes individually, it doesn't show which episodes I have previously bought like it used to.

Just downloaded book but did not get all the way down now cant play it any answers

just downloaded book but did not get all the way down now cant play it any answers

in iTunes, access your purchase history via your account in the iTunes store, find the file in question, and click on the report a problem button. report the problem. more info in this support article.
clicking here should take you directly to your iTunes store log-in window.

My G5 (non intel) starts up but does not go past the grey apple screen

My G5 (the non intel kids machine) starts up but does not go past the grey apple screen. It chimes, the grey apple screen comes up 20 seconds later with the rotating thing-ie, then the fan kicks on 1 minute 35 seconds later. It stays on that screen indefinitely.
I tried restarting without any cables connected to it with the same outcome. I tried to insert the OS X disc and pressing the "C" key and cannot get past the password page. I also tried to start it pressing the OptionCommand+PR keys with no results.

I am experiencing this problem as well. I had assumed it was a result of attempting to uninstall the Boot Camp drivers because I was getting a blue screen error every time I tried to startup with Windows. But I had also installed some updates for OS X at the same time so it could have been caused by that as well. I've erased everything now and I am trying to reinstall OS X but I'm three attempts in now because the installation has just been getting stuck in an indefinite loop at random points during the installation.

I have an Ipod touch 4th generation 8gb and it comes on but does not go past the apple logo

I have an ipod touch 4th generation 8gb and it comes on but does not go past the apple logo. What do I need to do?

This problem happened to me a month ago. The way I used to fix it:
1. Go it DFU Mode. For going into that, check this page.
2. Connect your iPod to your PC which has iTunes and iTunes will detect your iPod in recovery mode.
3. Press Shift + Restore if you have the .ipsw firmware file downloaded on your windows PC or just click Restore and follow the instructions to download the firmware file.
4. Wait and finally you're done!

I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?

I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?

Start by rebooting the computer. If that doesn't work, search for adobefnt*.lst and delete all instances where * becomes a 2-digit number.

My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?

can somebody please help me fix this issue, i have been sitting at my computer all last night and this morning trying to figure it out. It could be the hardrive or anything really i just need to get it working. Alot of important things that need to be done using this computer and i am freaking out.
My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Field ZZBUDAT is delta-relevant, but does not exist in the field list

Hi All,
I have created a Generic DataSource on a View.Now there is a situation ,i need to add a Date field form some other table.
So i have enhanced the datasource now that date is coming in my datasource.
But when i tried to make delta on that date field its showing error-
Field ZZBUDAT is delta-relevant, but does not exist in the field list
Message no. R8279
Diagnosis
The DataSource uses field ZZBUDAT for specifying the delta. In the DataSource field list, however, the field does not occur
Now how i can make this field dalta relevant?
Thanks,
Piyush

Piyush,
I think the message in SAP is quite clear....
If the field ZZBUDAT does not exist in the view ... how do you expect the datasource to know which records have changed...?
The delta relevant field SHOULD be in the view - else there is no way the extractor can identify the changed records ...
Please remember that the Generic extractor is a simple select statement with a where clause on the delta relevant field and nothing else ... if you want the changed on field to come from another table - then you need to write a function module extractor to do this...
The order of processing is that - the view fields are processed first - then the enhanced fields are processed followed by the user exits...

My MacBook Pro pwers up but does not get past the the Apple logo.

I have a MacBook Pro with Mountain Lion. It powers up but does not get past the Apple logo. The hardware test did not reveal any problems. It will also not get any further when I try to start up in Safe Mode. The last thing I was trying to do was connect to it from my desktop which I have done before. Any ideas.

I was able to get into the Repair utility and resolved some Permissions problems. It verified the disk and found no problems. However, it did not resolve the issue. I was also not able to get into Safe Mode.

Adobe Audition does not playback any audio file. He opens it but does not react on the play key.

Adobe Audition CC does not playback any audio file. He opens it but does not react on the play key. It is after use audio hardware usb wi-fi headphone and return to build-it out. The program don't react now.
I see problem:
I am unable to get playback at all in CS6 on Mac. The play button or spacebar will not move the playhead or make sound come out of the foamy things with the magnets. The play button toggles back and forth between green and white, but it isn't working. This is true in both multi track and waveform view.
Anyone have ideas on what the issue could be? Thanks!
Some Info:
MacBook Pro 2.2 i7, 16GB RAM, 512GB SSD
Mac OS 10.8.3
Audition CS6 5.0.2 Build 5
and reply:
Best bet would be to go into Preferences > Audio Hardware, verify your input and output devices are correct, and probably switch your Master Clock to the opposite setting. If that fails, we can continue troubleshooting.
I have the same problem as the author writes. But these actions do not help

Unfortunately I believe that requires purchasing the new version, and I do
not have budget approval for such a purchase.
On Tue, Jan 27, 2015 at 11:34 AM, Charles VW <[email protected]>

The software update badge does not show on the settings app on iphone 4s?? How to fix it?

Hi ,
I have a new iphone 4s and since i have baught , the new software update badge does not show on the settings app icon in my phone ,
Though the new update shows in the software update menu.
Any idea how to make the icon show the badge ???

Software Update option is only available if you have IOS 5 or above.
Your iPhone 3G IOS 4.2.1 is the end of line, there's no more update for this model.

WSUS download updates but does not store on the drive

Similar Messages

Maybe you are looking for