Wsus installation error in server 2012

Hi
when i am choosing the content directory path in wsus i am geting this error
Log file is located at C:\Users\Administrator\AppData\Local\Temp\1\tmp9249.tmp
Post install is starting
Fatal Error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Can any one help me to fix this issue

Hi,
could you please check if this is correct:
- is Named pipes/TCP enabled in SQL Server Configuration manager?
- Is Remote Connection Allowed?
- Is Windows Firewall on or off?
- If it is On, did you create an exception for port 1433 in Windows Firewall?
- Could WSUS contact SQL server?
Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

Similar Messages

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

Log error "Could not load file or assembly 'BarcodeConversion' or one of its dependencies. Access is denied. This code work fine in server 2008 but get this error in server 2012

This code work fine in server 2008, but get this error in server 2012. Do yo have any idea?

Need some more info as to where this is installed and how.
First thing to try would be to uninstall the solution and reinstall.
Check the GAC for your assembly as well as web.config.
If you don't see it in one of those places, something went wrong with the install and you'll need to start over.
Brandon James SharePoint Developer/Administrator

Prerequisite checking issue during obiee 11g installation in windows server 2012

HI..
Currently i'm facing problem while installing obiee 11g(11.1.1.7.0) in windows server 2012 and the database we're using is ms sql server 10.3 version. During the prerequisite checks while installation it shows the error "Checking Operating system certification" status "failed"..
can someone provide help to solve this issue..
Thanks,

HI..
Currently i'm facing problem while installing obiee 11g(11.1.1.7.0) in windows server 2012 and the database we're using is ms sql server 10.3 version. During the prerequisite checks while installation it shows the error "Checking Operating system certification" status "failed"..
can someone provide help to solve this issue..
Thanks,

Setup closed with exit code: 0x84C40013 - Silent Install error - SQL Server 2012 express management studio SP1

I am trying to create a silent installation package for SQL Server 2012 Express Management Studio SP1. (both x86 & x64)
Prior to installation I have performed the following :
1. Turned ON the Windows feature 'Microsoft .NET Framework 3.5.1' (I had read somewhere on the internet that this is required prior to installation)
2. Installed Microsoft .NET Framework 4.0
I am using the following command line to perform an unattended install :
<EXENAME> /Q /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools
However, the installation fails abruptly.
The application installs successfully with the following command line :
<EXENAME> /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools
The error occurs only while attempting to install the application with the /Q switch appended.
Please help.

Hello Fanny,
Thanks for providing the link to the SQL Server 2012 unattended install guide.
However, I must highlight that I was running the setup.exe with "Run As a Administrator" option and still facing the issue.
Anyways, I found out the root cause and I must say that it was a rather silly one.
As I had stated previously, the following command line was causing the issue :
<EXENAME>
/Q /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools
I simply changed it to the following and it worked....
<EXENAME>
/QUIET /IACCEPTSQLSERVERLICENSETERMS /ACTION=INSTALL /FEATURES=TOOLS
It so seems that everything must be in CAPITALS for this to work.
Regards,
Soumen

Installation of SQL Server 2012 express on Windows 7

Hi,
When I try to install SQL Server 2012 express, I get the following error message:
This SQL Server Setup media does not Support the language of the OS, or does not have the SQL Server English-language Version Installation Files. Use the matching language-specific SQL-Server Format and System locales through the regional Settings in the
Control Panel.
I tried changing the language via the Control Panel but it didn't help.
What should I do?

Hello,
Please, you need to match the following operating system settings to the language of SQL Server (US English):
(1) operating system user interface setting, (2) the operating system user locale setting and (3) the system locale setting.
https://msdn.microsoft.com/en-us/library/ee210665(v=sql.110)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Hi Matt,
Did you follow Alberto's suggestion? and it resolve your issues?

Continued DCOM Errors on Server 2012

We started noticing this error reoccurring after I set up a Powershell routine that sends daily emails to us with the errors from the systems Event Viewer log. At first it was once or two a day and today it was 5 yesterday it was 7. We are constantly
getting the follow error on our 2012 server:
The description for Event ID '10010' in Source 'DCOM' cannot be found. The local computer may not have the necessary registry information or message DLL files to display the message, or you may not have permission to access them. The following information
is part of the event:
'{73E709EA-5D93-4B2E-BBB0-99B7938DA9E4}'
When I use a Powershell routine that returns information about all the DCOM's I get this:
Application ID: {73E709EA-5D93-4B2E-BBB0-99B7938DA9E4}
Caption: Microsoft WMI Provider Subsystem Host
Description: Microsoft WMI Provider Subsystem Host
Installation Date:
Name: Microsoft WMI Provider Subsystem Host
Status:
So Powershell script says it says it is there. Then how can we get the error message that the DCOM cannot be found? We have ran a malware program on the server and come up with nothing. Checked the registry key and everything there seems to be
set correctly. Checked for server updates and there are none. Checked for Firmware updates (Dell PowerEdge Server) and nothing there either.
Of the 10 or so servers we have, this one with Server 2012 on it is the only one that giving us these errors, or any errors (not including Terminal Service errors), and we would like to find out what the problem is and correct it.
Thank you for any suggestions.
Mark

I am still getting these errors more than 10 times a day during the week but hardly any on the weekends.
Server
Event Time
Type
EventID
Source
Message
VOLCANO
08/27/2014 07:54:11
Error
10010
DCOM
The description for Event ID '10010' in Source 'DCOM' cannot be found. The local computer may not have the necessary registry information or message DLL files to display
the message, or you may not have permission to access them. The following information is part of the event:'{73E709EA-5D93-4B2E-BBB0-99B7938DA9E4}'
I had changed the power settings to every 5 hours which should have only given me 5 or 6 a day but I was getting as many as 15. Hard Drives were set to not power down. So I am not sure that the 'Sleep' suggestion in the one article is correct. But
this morning I went and put the power setting to never for the display.
Any other suggestions?

SQL Server 2012 Install Errors on Server 2012

I am getting an error when installed a new copy of Microsoft SQL Server 2012 Service Pack 1 on a newly created Server 2012 that has all its updates. About 90% of the way through the installation this is the error I received below:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
Attempted to perform an unauthorized operation.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%25400xBB814387
Second Error when continuing:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xBA6E21AA%25400x9A41B222
I clicked cancel on both errors but I don't know if this will impact my application. After the installation completes I can see everything passed except the Database Engine. Any thoughts on this issue?

Hello,
If this is a VMware machine, please read the following article:
http://support.microsoft.com/kb/2799534
If the above is not the case please share the Detail.txt log file with us. The following article may help you locate the file on disk:
http://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Server Manager Error, Windows Server 2012 Standed

Windows
Server 2012 on my desktop
and I've been in it then
open Server Manager "ServerManager.exe - This application could not be started"
error this time. In it,
the option is YES and
NO. YES is open
to the side of .net.
Please help me as soon as possible.

Hi,
Please check the event viewer to get more detailed error information about this issue.
You can also remotely access it from another server by adding this server in the server manager of the remote server, and try to access the roles and features from the remote server, and tackle the problem from there.
I hope this helps.

FEP 2010 installation on Windows server 2012

Hi all,
Is there any step- by step guide to install FEP 2010 on windows server 2012 R2?
We need to have this in place till the time, we get our FEP upgraded.
Regards

Hi,
It seems that you can only follow the official document to install FEP on Windows server 2012 R2.
Please verify that your environment meets the prerequisites before installation.
http://technet.microsoft.com/en-us/library/gg412482.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

File/Storage Errors in Server 2012

Hi
We are running Server 2012 (proper, downloaded from licensing portal) and are using it as an NFS server for some of our VM Ware machines.
Yesterday the NFS storage went offline for approx. 15 minutes, and then came back online. The following errors are found in Event Viewer, these errors appear to have been happening since 21/08 but this the first time the NFS server has gone offline.
This error is found in the Applications Log:
File Server Resource Manager finished syncing claims from Active Directory and encountered errors during the sync (0x80072030, There is no such object on the server.
). Please check previous event logs for details.
And is accompanied by this error:
File Server Resource Manager failed to find the claim list 'Global Resource Property List' in Active Directory (ADsPath:
LDAP://mydc.mydomain.local/CN=Global Resource Property List,CN=Resource Property Lists,CN=Claims Configuration,CN=Services,CN=Configuration,DC=mydc,DC=local). Please check that the claims list configured for
this machine in Group Policy exists in Active Directory.
Additionally the following error appears in the System log, but not at the same time as the above:
The Group Policy Client Side Extension Folder Redirection was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before
the next startup or logon for this user, and this may result in slow startup and boot performance.
Our PDC is Server 2003 R2, we have a 2008R2 DC and the 2012 server seems to be authenticating with this DC. There are no errors on that DC.
Any help appreciated.
Many thanks

I thing the following site gives a solution:
It is a schema problem...
Event ID 12339 and 12344: File Server Resource Manager failed to find claim list
Problem: You are running a Windows Server 2012 file server and you see the error messages in your logs every 15 minutes or so.
1) Event ID: 12339
File Server Resource Manager failed to find the claim list 'Global Resource Property List' in Active Directory (ADsPath: LDAP://dc1.domain.local/CN=Global Resource Property List,CN=Resource Property Lists,CN=Claims Configuration,CN=Services,CN=Configuration,DC=domain,DC=local).
Please check that the claims list configured for this machine in Group Policy exists in Active Directory.
2) Event ID: 12344
File Server Resource Manager finished syncing claims from Active Directory and encountered errors during the sync (0x80072030, There is no such object on the server.) Please check previous event logs for details.
Solution: You can either upgrade the Active Directory schema to version 56 (Windows Server 2012) or safely ignore the error messages.
If you can update the schema of your domain. Follow these steps:
1)
log on to Windows Server 2012 as Administrator of your domain
2)
Copy from "support \adprep" in the media of Windows Server 2012 to "c:\"
3)
run this command
c:\adprep\adprep.exe /forestprep
THANKS to KIM HELLMAN
Search for kim hellman blogspot and the error message

Bare metal restore of full server backup fails with RPC error 0x800706BA (server 2012)

With Windows Server 2012, after creating a successful windows server backup (full server), I am unable to do a bare metal restore of the system.
EFI System Partition, C:, D: are the volumes on a single array (Raid 5).
Loading WinRE and launching re-image, the full server restore stops after completing the C: restore just after beginning the D: drive restore (data volume) with the error with the message about RPC error 0x800706BA, unavailable.
The system will not boot as a result of the failure.
What may be causing this?
[edit]
I think I have two things working against me here... one, Volume Shadow Copy service wasn't running in WinPE and two.. the D: volume contains data deduplication.
I think this is causing some of my problems.
Is there an additional service that I need to start in WinPE to get a volume that was deduplicated restored perhaps using wbadmin?

Hi,
Thanks for the reply Shaon.
The hardware system is identical; however, I am increasing storage capacity from 12TB to 16TB. Basically, the system is the same, just new hard drives (4x4TB versus 4x3TB). Drives are all identical enterprise class drives and I am actually using
the same system (backup, swap drives then restore).
I tried both using the WinRE restore (re-image) with the backup set, and tried using wbadmin. Both produce same RPC unavailable messages (although using the GUI based tool via WinRE provides the additional error code #).
I do not have any idea what to look at to try to figure this one out.
[edit]
I was just informed of this posting:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/147efccc-e0e9-4458-852e-c3a44ae5cb64/the-system-image-restore-failed-error-details-he-rpc-server-is-unavailable-0x800706ba?forum=windowsbackup
and in my case, this lab server does in fact act also as a DC as well as a file server... do I need to spin up a secondary controller (perhaps in a VM on another machine) to do this restore?

My 10.9.0.1 internal mac was ruined after the installation of Windows Server 2012 on boot camp

Hi Everyone. I've been trying to install Windows Server 2012 on my boot camp. Well, soon after the 2012 was installed, my mac os 10.9.0.1 was ruined. When I pressed on the option key while the imac was booting, I can see the icon of "10.9.0.1 recovery". But after I chose it, the apple tried very hard to boot it up with a progress bar below the apple icon. The computer shut down itself after the progress bar reached the end. I've tried boot it up with the installation CD and tried to repair the Macintosh HD in Disk Uitilites but no use. It was said the hard drive cannot be repaired and better be reformat. Currently I can only boot up my mac from my SuperDuper external clone drive. Anyone could give me wise advices to fix this problem please?

The "wise advices" I can offer are:
Read the Boot Camp documentation before trying to reinstall Windows Server. Windows Server is not supported by Boot Camp
Erase and reformat your hard drive. Reinstall OSx then restore your data from your backup.
Use a virtual machine like Parallels, Fusion, or VirtualBox to install Windows Server

Clean Installation of Windows Server 2012 R2 cannot access internet

I just installed a clean Windows Server 2012 R2 Data Center and all drivers installed with no issue. I used Ethernet connection to access internet via IE (let say google.com) but failed. Clicked "Fix connection problem" and returned "website
(www.google.com) is online but isn't responding to connections attempts." Therefore, I suspected Windows Firewall (WF) setting. I disabled WF, allow IE in WF, allow port 80 but all did not work in this case. I am able to ping google.com but it just does'n
work in browser (IE, Chrome, Firefox). The same cable connection I tried with Windows 8.1, 7 with no issue. Please advise is there any clue I miss up for Windows 2012 R2 Data Center?
Sean

C:\Users\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : WIN-4O28FIG5HD5
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 30-85-A9-94-5B-62
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.1.13(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Friday, June 6, 2014 11:46:30 PM
Lease Expires . . . . . . . . . . : Saturday, June 7, 2014 11:46:30 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled
C:\Users\Administrator>nslookup
Default Server: router.asus.com
Address: 192.168.1.1
> google.com
Server: router.asus.com
Address: 192.168.1.1
Non-authoritative answer:
Name: google.com
Addresses: 2404:6800:4001:801::1008
123.136.105.20
123.136.105.35
123.136.105.46
123.136.105.59
123.136.105.49
123.136.105.27
123.136.105.57
123.136.105.37
123.136.105.24
123.136.105.31
123.136.105.53
123.136.105.38
123.136.105.48
123.136.105.26
123.136.105.16
123.136.105.42
LAN settings in IE is set to Automatically detect settings, no proxy is selected.
Sean

Client Tools installs per SQL Server 2012

Is there a maximum allowed install of Client Tools per purchase of SQL Server 2012? I believe we have Enterprise but may have Standard. SQL Server Management Studio Express is not sufficient because of the SSIS limitations. Thanks!

matters is the license to connect to the server SO provided that the server I was connected
to had a CAL assigned to me or it was CPU licensed then all is well, as the client tools aren’t licensed themselves
http://blogs.technet.com/b/andrew/archive/2008/07/14/licensing-sql-server-client-tools.aspx
http://www.scottandscottllp.com/main/SQL_Server_Licensing_Perils.aspx
In short client tools are free as long as they connect to core components of SQL Server – the Database Engine and the Reporting, Integration and Analysis Services – which has correct licensing.

Wsus installation error in server 2012

Similar Messages

Maybe you are looking for