WSUS server no longer works/clients not receiving updates after replacing domain controller
I first logged into the WSUS server and found that I couldn't launch the console, event log was full of errors about different web services not working. I ran
wsusutil.exe usecustomwebsite true
which appeared to correct that problem, but the WSUS server and all workstations report the following error code when checking for updates:
80072F76
Client WindowsUpdate log is full of the following:
2014-10-29 23:36:22:935 832 f48 Misc WARNING: WinHttp: WinHttpQueryHeaders(WINHTTP_QUERY_LAST_MODIFIED) failed. error 0x80072f76
2014-10-29 23:36:22:935 832 f48 Misc WARNING: GetServerFileTime failed. error 0x80072f76
The upstream server and another downstream server are working fine. It is only this one WSUS server and clients on this segment of the network where a new domain controller was put in place last week.
Thoughts?
Hi,
What's the port used by your WSUS server?
Usecustomwebsite will change the port number used by the WSUS Web services from 80 to 8530 or vice versa.
If you set this value to true, WSUS Setup will use port 8530 for its Default Web site. If you set it to
false, WSUS will use port 80.
If it doesn't work, please post the entire windowsupdate.log here. It may give some hints.
Best Regards.
Steven Lee
TechNet Community Support
Similar Messages
-
My Mac Mail no longer works (does not receive or send mail)
I have had my MacBook for maybe a year now, and I don't really use the mail often. The last time I was able to send and receive mail was back in October. Now it will no longer work.. I get a pop up that's always asking me to put in my mail password, but nothing happens. I even tried going to preference to change my password and it won't allow me.
When I try to send mail, the little paper plane icon is not clickable. Nothing happens. The only thing I can do is exit out of the message or save the draft. And I can not seem to get mail at all from anyone. I haven't touched any setting either, so I don't understand why it no longer works. My bank can no longer send me emails nor can my friends send me emails anymore.
Does anyone know how I can possibly fix this problem and get my email up and running again. Thanks in advance for all the advice.Sorry but I'm really not to sure what I have. I'm not good with knowing my computer model. All I know is that its a MacBook running with Leopard. I got my computer last year so I suppose its fairly new. Is there a place on my computer where I can check to see what it is (sorry to be so dumb with my own mac)
And everything else works fine. I love Safari. It's just my mail that doesn't work. Here's the message that pop up several times.
"The MobileMe IMAP server “mail.mac.com” rejected the password for user “akcastaldo”
Please re-enter your password, or cancel."
The only problem here is, even though I enter my password it doesn't do anything. It makes that message go away for about 3-5 mins. After that it pops right back up. And I can't even go into my preference and change my email password. So I don't know what to do. -
At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work. Does anyone have a remedy for this?
Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5
-
I recently updated to Maverick. My external Apple Fax Modem no longer works. I receive a message that it is not connected. What needs to be done. I have repaired permissions, and found no error.
Chances are it is a software-based modem. Update the drivers of the device to Mavericks-compatible driver from the vendor.
-
Can anyone help me figure out how to sync my ipod with my purchased music? I have used several computer and at one point synced my ipod with a computer that only had about half of my music. My other computers are no longer working. Not sure how to get my purchased music back onto my ipod?
Hi kimcinma!
Your previous purchases are saved on iCloud even if you bought them on another computer. If you can't find them on your current computer, you might need to unhide them. Go to iTunes preferences, and click on Store Preferences. Then click the box for "show iTunes in the Cloud purchases". Then click on OK, and everything you've ever bought from iTunes on that Apple ID will show up in your library. You will need to download them from iCloud first before you can synch them to your iPod Classic. To do this, click on the little cloud with the arrow in it next to your song, and it will download to your computer. When you have the music that you want downloaded, plug in your iPod and synch away. Hope this helps!
Sandygirl -
I recently upgraded to 10.9.1 and now my OS server no longer works.It says I need to upgrade to a later version. I am unable to see a free upgrade in the app store.
You might be better posting this under Server OSX
https://discussions.apple.com/community/servers_enterprise_software/os_x_server -
Have Mail Version 4.6 (1085), is not working properly not receiving mail. I sent a test message to my computer; it took over an hour delivering. There are multiple copies of messages appearing in the recovered folder
My computer is a MacBook, version osx 10.6.8
All help appreciated
<E-mail Edited by Host>Hi vin rouge,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Configuring Mail for your email account
http://support.apple.com/kb/HT1277
Cheers,
- Judy -
I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRITry this -> http://support.apple.com/kb/TA38632?viewlocale=en_US
-
VTP (revision numbers) and one client not getting updates
Hello.
Somewhere along the line one of our switches (3750x) got messed up. Once they were finally configured about 6 months ago we never touched them again.
I noticed yesterday when I created a new vlan it was not getting populated to one of our switches. For some reason I did not notice that the domain name on the switch not receiving updates was not our domain.
So I switched the domain on this switch to the correct domain and it still does not show any updates and also has a revision # of 7.
So on this switch I then unplugged all trunk ports and did "vtp mode transparent". I then switched it back to "vtp mode client vlan".
It still showed revision 7.
So I tried "vtp domain bogus" and "vtp mode transparent" and then did "vtp domain mydomain" and "vtp mode client vlan".
It still showed revision 7.
So I tried "vtp domain bogus" and "vtp mode transparent vlan" and then did "vtp domain mydomain" and "vtp mode client vlan".
It still showed revision 7.
I am at a loss as to how to fix this problem other than rebuilding the switch. I have a vtp server at revision 10 and two other switches also at revision 10 that are getting updates from the vtp server. Only one switch is not. Please note that this one switch that is not working at some point did since it has all the vlans we created on our initial installation.
-- Thanks
// GOOD switch
GOODSWITCH#show vtp status
VTP Version capable : 1 to 3
VTP version running : 3
VTP Domain Name : mydomain
VTP Pruning Mode : Disabled
VTP Traps Generation : Disabled
Device ID : 7426.acad.de00
Feature VLAN:
VTP Operating Mode : Client
Number of existing VLANs : 15
Number of existing extended VLANs : 6
Maximum VLANs supported locally : 1005
Configuration Revision : 10
Primary ID : b838.61aa.5880
Primary Description : lab-desk
MD5 digest : 0xB8 0x3E 0x2C 0xB7 0x85 0xB5 0x5D 0xA6
0x4A 0x4E 0xFC 0x5E 0x5A 0xA1 0xAF 0xCC
Feature MST:
VTP Operating Mode : Transparent
Feature UNKNOWN:
VTP Operating Mode : Transparent
// BAD switch
BADSWITCH#show vtp status
VTP Version capable : 1 to 3
VTP version running : 3
VTP Domain Name : mydomain
VTP Pruning Mode : Disabled
VTP Traps Generation : Disabled
Device ID : 7426.acad.ee80
Feature VLAN:
VTP Operating Mode : Client
Number of existing VLANs : 12
Number of existing extended VLANs : 6
Maximum VLANs supported locally : 1005
Configuration Revision : 7
Primary ID : b000.b4b0.f200
Primary Description : lab-desk
MD5 digest : 0x7A 0x5C 0x2E 0x05 0xF2 0x80 0x6F 0x2F
0x4E 0xE1 0x34 0x07 0x01 0x7F 0xB9 0x2B
Feature MST:
VTP Operating Mode : Transparent
Feature UNKNOWN:
VTP Operating Mode : TransparentOutput from the switch NOT getting updates.
// we have three trunk lines
TenGigabitEthernet1/1/1
TenGigabitEthernet1/1/2
TenGigabitEthernet2/1/1
// #show interfaces trunk
Port Mode Encapsulation Status Native vlan
Te1/1/1 on 802.1q trunking 1
Te1/1/2 on 802.1q trunking 1
Gi2/0/31 auto n-802.1q trunking 1
Gi2/0/46 auto n-802.1q trunking 1
Te2/1/1 on 802.1q trunking 1
Port Vlans allowed on trunk
Te1/1/1 1-4094
Te1/1/2 1-4094
Gi2/0/31 1-4094
Gi2/0/46 1-4094
Te2/1/1 1-4094
Port Vlans allowed and active in management domain
Te1/1/1 1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Te1/1/2 1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Gi2/0/31 1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Gi2/0/46 1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Te2/1/1 1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Port Vlans in spanning tree forwarding state and not pruned
Te1/1/1 1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Te1/1/2 1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Gi2/0/31 6,12,100,125-126,129,1032,1096,1128,1160,1192,1224
Gi2/0/46 1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Te2/1/1 none
show spanning-tree interface TenGigabitEthernet1/1/1
Vlan Role Sts Cost Prio.Nbr Type
VLAN0001 Root FWD 2 128.53 P2p
VLAN0006 Root FWD 2 128.53 P2p
VLAN0012 Root FWD 2 128.53 P2p
VLAN0100 Root FWD 2 128.53 P2p
VLAN0125 Root FWD 2 128.53 P2p
VLAN0126 Root FWD 2 128.53 P2p
VLAN0127 Root FWD 2 128.53 P2p
VLAN0129 Root FWD 2 128.53 P2p
VLAN1032 Root FWD 2 128.53 P2p
VLAN1096 Root FWD 2 128.53 P2p
VLAN1128 Root FWD 2 128.53 P2p
VLAN1160 Root FWD 2 128.53 P2p
VLAN1192 Root FWD 2 128.53 P2p
VLAN1224 Root FWD 2 128.53 P2p
show spanning-tree interface TenGigabitEthernet1/1/2
Vlan Role Sts Cost Prio.Nbr Type
VLAN0001 Desg FWD 2 128.54 P2p
VLAN0006 Desg FWD 2 128.54 P2p
VLAN0012 Desg FWD 2 128.54 P2p
VLAN0100 Desg FWD 2 128.54 P2p
VLAN0125 Desg FWD 2 128.54 P2p
VLAN0126 Desg FWD 2 128.54 P2p
VLAN0127 Desg FWD 2 128.54 P2p
VLAN0129 Desg FWD 2 128.54 P2p
VLAN1032 Desg FWD 2 128.54 P2p
VLAN1096 Desg FWD 2 128.54 P2p
VLAN1128 Desg FWD 2 128.54 P2p
VLAN1160 Desg FWD 2 128.54 P2p
VLAN1192 Desg FWD 2 128.54 P2p
VLAN1224 Desg FWD 2 128.54 P2p
show spanning-tree interface TenGigabitEthernet2/1/1
Vlan Role Sts Cost Prio.Nbr Type
VLAN0001 Altn BLK 2 128.109 P2p
VLAN0006 Altn BLK 2 128.109 P2p
VLAN0012 Altn BLK 2 128.109 P2p
VLAN0100 Altn BLK 2 128.109 P2p
VLAN0125 Altn BLK 2 128.109 P2p
VLAN0126 Altn BLK 2 128.109 P2p
VLAN0127 Altn BLK 2 128.109 P2p
VLAN0129 Altn BLK 2 128.109 P2p
VLAN1032 Altn BLK 2 128.109 P2p
VLAN1096 Altn BLK 2 128.109 P2p
VLAN1128 Altn BLK 2 128.109 P2p
VLAN1160 Altn BLK 2 128.109 P2p
VLAN1192 Altn BLK 2 128.109 P2p
VLAN1224 Altn BLK 2 128.109 P2p -
Not receiving email from one domain
Hi,
I am running Exchange 2003 on Windows Server 2003 SP2 and suddenly starting having the problem of not receiving mail from one domain. All other domains seem to be fine, although seem slower to receive mail than normal. The sender of the domain in question does not receive any NDR or bounce back error messages, so they are none the wiser the mail has come through. I have checked the junk/spam, I don't have any filters which could be blocking the domain.
Any ideas??
Thanks
Hi,
Please enable the protocol log on SMTP virtual server to check whether the remote domain has attempted to connect to your exchange server to send email to you.
If the remote domain has attempted to connect to your exchange server, please check whether the message is received by the SMTP server. If the message has been received, please use the message tracking log or queue viewer to check whether the message stuck on the server.
If the message is rejected, you can use protocol log to gather further information.
If the remote domain does not attempt to connect to your exchange server, I think you need to work with the remote domain admin regarding the issue as other domains are able to send email to you with no problem.
Mike -
touch no longer works since ios 6 update!!!!!!!!!!!!! FIX THIS PROBLEM
Did you fail transfer all purchases to your computer before attmeoting to update? not good. ''You can redownload some itunes purchases in some contries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You will need to restore. If you are unable then read this:
iOS: Unable to update or restore -
I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?
I have the same problem.
Two similar discussions:
https://discussions.apple.com/message/23081658#23081658
https://discussions.apple.com/message/23281391#23281391
I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
Please let us know what feedback you got from asking Apple support. -
I have a 2010 Cadillac CTS that no longer works w/my iPhone 4 after iOS7 Upgrade.
I have a 2010 Cadillac CTS that no longer works w/my iPhone 4 after iOS7 Upgrade. Any suggestions? It worked well before the upgrade.
I'm sorry...my question was imprecise. When I said 'no longer works' I was referring to plugging the device into the USB and power jacks in the center console and then being able to play music through the radio and control the device from either the radio or the steering wheel buttons. The iPhone 4 I use for this purpose has no cellular service and has never been paired with the car. I have an iPhone 5 with cellular service that is paired with the car. I cannot test theiPhone 5 with the car because of the difference of connectors on the phone. :-( The iPhone 4, however, works fine in my wife's Hyundai Santa Fe.
Thanks, in advance! -
I have had my ipod nano 7th gen. for 2 months, and the left earbud no longer works. Can I get a replacement, and how do I go about it?
Or make an appointment at the Genius Bar of an Apple store
Apple Retail Store - Genius Bar -
I have a MacBook Pro laptop purchased in June 2011, and the superdrive no longer works. Rather than have it replaced, I'll buy a 3rd party superdrive that plugs into the USB port. Does the external superdrive need it's own power source, or will the USB port provide enough power?
The Apple external SuperDrive actually exceeds the allowed power draw. Because of this, it is only trouble-free on certain models that accommodate this excess.
All others require an external Power source.
Maybe you are looking for
-
Install boot camp partition on Mac mini
How to install boot camp on a Mac mini? It ask for a bootable DVD which I have inserted in my Mac book pro, but it does not recognize the DVD. How can I install boot camp on a mini?
-
Problem in saving the spool list into Excel file.
Hello Friends, I run a background process for a report, and storing the resulting list into Excel format file. But the result is column values jumbled, it means columns values are not sitting in the right place in excel sheet. I
-
Arabic letters in Text object I want to create a web pages which has to show the mother language the user clicks. For eg. French, German, Arabic. If a particular language is selected then all web pages should be in that language. I want to know is it
-
Analytic workspace manager not found
hello, I have installed oracle 11g R1 but I found a problem. I want to use Analytic Workspace Manager to create dimentional object such as data cube and dimention, but I didn't found from where I can lunch it or configure it.there is no shortcut or f
-
Cool Iris is blank when it loads and does not allow searching either . . . this just happened two days ago and, no, I did not download any newer/incompatible versions of Firefox . . . any recent problems? Thanks.