WSUS SP2 Client Systems are not detecting Updates,

I have a WSUS SP2 (with WSUS-KB2720211-x64) running on Windows 2008 R2. The WSUS site is running on custom site port 8530.
All the clients are reporting without any issues. However the approved patches are not getting detected on the clients.
From the client I can get cab file by accessing http://WSUSServerName:8530/iuident.cab
Network connectivity OR firewall issue is ruled out. Also the client system are updating the update agent to
7.6 from WSUS. I am sure the approved patches are needed on the client PC's, the WSUS report for a particular approved patch too says that the approved patch is needed.
Please find the following WIndowsUpdate log from the client PC and please advise.
2015-02-15 14:17:21:387
804 ec4
Misc =========== Logging initialized (build: 7.6.7600.256, tz: +0300) ===========
2015-02-15 14:17:21:387
804 ec4
Misc = Process: C:\Windows\system32\svchost.exe
2015-02-15 14:17:21:387
804 ec4
Misc = Module: c:\windows\system32\wuaueng.dll
2015-02-15 14:17:21:387
804 ec4
Service *************
2015-02-15 14:17:21:387
804 ec4
Service ** START ** Service: Service startup
2015-02-15 14:17:21:387
804 ec4
Service *********
2015-02-15 14:17:21:402
804 ec4
Agent * WU client version 7.6.7600.256
2015-02-15 14:17:21:402
804 ec4
Agent * Base directory: C:\Windows\SoftwareDistribution
2015-02-15 14:17:21:402
804 ec4
Agent * Access type: No proxy
2015-02-15 14:17:21:402
804 ec4
Agent * Network state: Connected
2015-02-15 14:17:28:313
804 3f4
Report CWERReporter::Init succeeded
2015-02-15 14:17:28:313
804 3f4
Agent *********** Agent: Initializing Windows Update Agent ***********
2015-02-15 14:17:28:313
804 3f4
Agent *********** Agent: Initializing global settings cache ***********
2015-02-15 14:17:28:313
804 3f4
Agent * WSUS server: http://192.168.1.1:8530
2015-02-15 14:17:28:313
804 3f4
Agent * WSUS status server: http://192.168.1.1:8530
2015-02-15 14:17:28:313
804 3f4
Agent * Target group: (Unassigned Computers)
2015-02-15 14:17:28:313
804 3f4
Agent * Windows Update access disabled: No
2015-02-15 14:17:28:313
804 3f4
DnldMgr Download manager restoring 0 downloads
2015-02-15 14:17:28:313
804 3f4
AU ########### AU: Initializing Automatic Updates ###########
2015-02-15 14:17:28:329
804 3f4
AU # WSUS server: http://192.168.1.1:8530
2015-02-15 14:17:28:329
804 3f4
AU # Detection frequency: 22
2015-02-15 14:17:28:329
804 3f4
AU # Approval type: Pre-install notify (Policy)
2015-02-15 14:17:28:329
804 3f4
AU # Auto-install minor updates: No (User preference)
2015-02-15 14:17:28:329
804 3f4
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-02-15 14:17:28:360
804 ec4
Report *********** Report: Initializing static reporting data ***********
2015-02-15 14:17:28:360
804 ec4
Report * OS Version = 6.1.7601.1.0.196880
2015-02-15 14:17:28:360
804 ec4
Report * OS Product Type = 0x00000007
2015-02-15 14:17:28:360
804 ec4
Report * Computer Brand = VMware, Inc.
2015-02-15 14:17:28:360
804 ec4
Report * Computer Model = VMware Virtual Platform
2015-02-15 14:17:28:360
804 ec4
Report * Bios Revision = 6.00
2015-02-15 14:17:28:360
804 ec4
Report * Bios Name = PhoenixBIOS 4.0 Release 6.0
2015-02-15 14:17:28:360
804 ec4
Report * Bios Release Date = 2013-07-30T00:00:00
2015-02-15 14:17:28:360
804 ec4
Report * Locale ID = 1033
2015-02-15 14:17:28:360
804 3f4
AU Successfully wrote event for AU health state:0
2015-02-15 14:17:28:360
804 3f4
AU Initializing featured updates
2015-02-15 14:17:28:360
804 3f4
AU Found 0 cached featured updates
2015-02-15 14:17:28:360
804 3f4
AU Successfully wrote event for AU health state:0
2015-02-15 14:17:28:360
804 3f4
AU Successfully wrote event for AU health state:0
2015-02-15 14:17:28:360
804 3f4
AU AU finished delayed initialization
2015-02-15 14:17:28:360
804 3f4
AU Triggering AU detection through DetectNow API
2015-02-15 14:17:28:360
804 3f4
AU Triggering Online detection (non-interactive)
2015-02-15 14:17:28:360
804 ec4
AU #############
2015-02-15 14:17:28:360
804 ec4
AU ## START ## AU: Search for updates
2015-02-15 14:17:28:360
804 ec4
AU #########
2015-02-15 14:17:28:360
804 ec4
AU <<## SUBMITTED ## AU: Search for updates [CallId = {0512C3B0-1E35-4BDD-9B28-02E064DF3EFB}]
2015-02-15 14:17:28:360
804 56c
Agent *************
2015-02-15 14:17:28:360
804 56c
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-15 14:17:28:360
804 56c
Agent *********
2015-02-15 14:17:28:360
804 56c
Agent * Online = Yes; Ignore download priority = No
2015-02-15 14:17:28:360
804 56c
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-02-15 14:17:28:360
804 56c
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-02-15 14:17:28:360
804 56c
Agent * Search Scope = {Machine}
2015-02-15 14:17:28:360
804 56c
Setup Checking for agent SelfUpdate
2015-02-15 14:17:28:360
804 56c
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2015-02-15 14:17:28:360
804 56c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2015-02-15 14:17:28:375
804 56c
Misc Microsoft signed: Yes
2015-02-15 14:17:30:981
804 56c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2015-02-15 14:17:30:981
804 56c
Misc Microsoft signed: Yes
2015-02-15 14:17:30:981
804 56c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2015-02-15 14:17:30:981
804 56c
Misc Microsoft signed: Yes
2015-02-15 14:17:30:981
804 56c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2015-02-15 14:17:30:981
804 56c
Misc Microsoft signed: Yes
2015-02-15 14:17:30:996
804 56c
Setup Determining whether a new setup handler needs to be downloaded
2015-02-15 14:17:30:996
804 56c
Setup SelfUpdate handler is not found. It will be downloaded
2015-02-15 14:17:30:996
804 56c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2015-02-15 14:17:30:996
804 56c
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2015-02-15 14:17:30:996
804 56c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2015-02-15 14:17:31:012
804 56c
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2015-02-15 14:17:31:012
804 56c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2015-02-15 14:17:31:012
804 56c
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2015-02-15 14:17:31:012
804 56c
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2015-02-15 14:17:31:449
804 56c
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2015-02-15 14:17:31:449
804 56c
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://192.168.1.1:8530/ClientWebService/client.asmx
2015-02-15 14:17:36:721
804 56c
Agent * Found 0 updates and 76 categories in search; evaluated appl. rules of 724 out of 1278 deployed entities
2015-02-15 14:17:36:721
804 56c
Agent *********
2015-02-15 14:17:36:721
804 56c
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-15 14:17:36:721
804 56c
Agent *************
2015-02-15 14:17:36:737
804 c4c
AU >>## RESUMED ## AU: Search for updates [CallId = {0512C3B0-1E35-4BDD-9B28-02E064DF3EFB}]
2015-02-15 14:17:36:737
804 c4c
AU # 0 updates detected
2015-02-15 14:17:36:737
804 c4c
AU #########
2015-02-15 14:17:36:737
804 c4c
AU ## END ## AU: Search for updates [CallId = {0512C3B0-1E35-4BDD-9B28-02E064DF3EFB}]
2015-02-15 14:17:36:737
804 c4c
AU #############
2015-02-15 14:17:36:737
804 c4c
AU Successfully wrote event for AU health state:0
2015-02-15 14:17:36:737
804 c4c
AU Featured notifications is disabled.
2015-02-15 14:17:36:737
804 c4c
AU AU setting next detection timeout to 2015-02-16 07:41:21
2015-02-15 14:17:36:737
804 c4c
AU Successfully wrote event for AU health state:0
2015-02-15 14:17:36:737
804 c4c
AU Successfully wrote event for AU health state:0
2015-02-15 14:17:36:784
804 56c
Report CWERReporter finishing event handling. (00000000)
2015-02-15 14:17:41:729
804 56c
Report REPORT EVENT: {6EBDD70F-EF5E-4673-9283-1A94A5FC5A0C}
2015-02-15 14:17:36:721+0300 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 0 updates.
2015-02-15 14:17:41:729
804 56c
Report REPORT EVENT: {621A5AA7-E564-44F1-B16B-5E928ECE4BC0}
2015-02-15 14:17:36:721+0300 1
156 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Pre-Deployment Check
Reporting client status.
2015-02-15 14:17:41:729
804 56c
Report CWERReporter finishing event handling. (00000000)

KB2720211 has been superceded by KB 2828185, I'd recommend installing that first, it resolves a lot of issues with the first update.
http://blogs.technet.com/b/wsus/archive/2013/04/16/update-solution-for-wsus-export-bug-is-now-available-for-wsus-3-x-sp2.aspx
https://support.microsoft.com/kb/2828185
It would be worth checking if those updates you think should be installed haven't already been superceded by others. It's possible newer updates have been installed, so the superceded updates could actually be declined.

Similar Messages

Windows 8.1 clients are not detecting updates deployed to them through SCCM 2012 R2

Hello,
We are using SCCM 2012 R2 to deploy software updates.
On Windows 8.1 SCCM does not show certain updates as being needed and isn't deploying them to the clients even though Windows Update will show them as high importance. These same updates are being detected and deployed to Windows 8 clients successfully.
I believe that the update catalog that WSUS uses may have some incorrect detection rules for the following updates:
2917933
2913320
2913270
2913152
2909569
2904440
2904266
2903939
2899189
2893984
2893294
2892074
2916626
2898785
My automatic deployment rules include Windows 8.1 in the product category. I have even created a standalone rule for Windows 8.1 that builds a new package and the behavior is the same.
We only have a handful of Windows 8+ clients so this hasn't been a big issue but others may want to keep an eye out.

I am also running into this issue. After "checking online for updates" on one of my machines in office I found that there were 21 important updates for my 8.1 box. When I cross reference them in SCCM under All Software Updates, it appears these
8.1 updates are not listed. They are however listed for all other OS.
10 seconds after typing this, I went in to verify my WSUS -> Products and Classifications settings and come to find 8.1 and 2012 R2 weren't selected, even though it's an option in SCCM. Go figure! This wasn't the end though. After
running a Synchronization, my issue still wasn't resolved. Went back to check my settings and they again were changed back to having these OS unchecked. Finally, a solution! I found that in SCCM, under Administration tab, Site Configuration
> Sites > ABC - Mysitename, right click and scroll down to "Configure Site Components" > Software Update Point. This setting (although the same as is in WSUS) takes precedence, thus was rolling my settings back to the original configuration
in WSUS.
So long story short, even though my automatic deployment rules stated approve all windows 7/8/8.1 criticals/importants, 8.1 was getting skipped for the most part because my WSUS server wasn't syncing with Microsoft for all of the updates I required. I
did have a couple of updates that squeezed through because they were categorized as "Security Updates for Windows 8, 8.1".
Not sure if this is the solution you were looking for, but your thread got me started in the right direction, hopefully this response helps in the same way!
Thanks!

Token and smart card reader are not detected on Mavericks if not plugged on a USB port during system boot

Well, both token and smart card reader are not detected on OS X 10.9 if not plugged on a USB port during system boot. So, if I am already working within the system and need to use my certificates I have to plug the token or smart card reader on a USB port and restart Mavericks.
Token is a GD Starsign and Smart Card Reader is a SCR3310 v2.
Thoughts?

SCS is a very good app, since I've read that Apple has discontinued support for PC/SC interfaces after the release of Mountain Lion.
(My previous installation was a Mavericks upgrade from Lion)
However, I don't know what and how to debug using Smart Card Services. Do you know any commands to use?
Apparently, the SC reader reports no issues: the LED is blinking blue when no smart card is present and becomes fixed blue when a smart card is inserted – according to the manuals, this shows that there is correct communication between the OS and the CCID reader.
I don't know what to do; I'm beginning to hypothesize it's a digital signer issue. In fact, my smart card only supports one application called File Protector (by Actalis) to officially sign digital documents. This application seems to have major difficulties in identifying the miniLector EVO.
The generic and ambiguous internal error comes when I try to manually identify the peripheral.
Athena CNS is one of the Italian smart cards and is automatically recognized and configured (so it's correct – no doubts about this), while "ACS ACR 38U-CCID 00 00" seems to be the real name of the miniLector.
(I'm assuming this because System Information also returns that the real manufacturer is ACS... bit4id is a re-brander)
However, when I click on it and then tap OK, it returns internal error.
As first attempt, I would try to completely erase&clean File Protector files to try a reinstall. Then, if this still doesn't work, I'd debug using the terminal.
So:
- Do you know any applications to 100% clean files created by an installer?
- Do you have in mind any solutions that I might have forgotten?
Thanks in advance from an OS X fan!

Embedded fonts are not detected by Designer

I am trying to create a fillable pdf based from a form created in Adobe Framemaker. However, the fonts I have embedded in the .pdf source file from FrameMaker are not detected by Livecycle Designer. These include very common fonts like Helvetica and Times. Is there a setting somewhere in Designer to pick up on these embedded fonts?

Thank you for your feedback. The Job im using is simple take a word document converting it into a pdf format. If this is done I will see it in my Acrobat view. There is no fonts at all. The System is notifying me that the font "ETBFGYI+DIN-Regular" are not embedded. And there will be some character not shown or printed correctly. I didn't change anything on the setting of Acrobat. I'm using this Acrobat almost for 2 years and I never had any problem. The Problem came up after the last update of the software to version 11.01.10.

Backened documents are not getting updated in Classic Scenario

Hi,
We are using SRM 7.0 version and we are working on classic scenario where the shopping cart - RFX - Contract are created in SRM and the PO - GR - IR are created in ECC. The blackened documents which are created in ECC PO - GR and IR these documents are not getting updated in SRM system.
Is there any business functions to be activated.

Hi Sunil,
You manually run report ""BBP_GET_STATUS_2" after PO is created in MM. Then check if the follow-on-docs are updated in SC.
If it is working fine after you manully run report, you will have to properly set time to run this report automatically.
Best Regards,
Anu
Edited by: Anuradha UG on May 18, 2010 8:09 PM

Values are not getting updated in sales report

I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
regards,
thooyavan

Hi,
Please check with the Customer and Material Statistics group in the Customer and material master respectively.
Further check with the LIS settings (Sales Area combination with the Update group).
Reward points if this helps you.
Regards,
Harsh

Mac Pro OSX 10.8.3 HP 4000 series scanners are not detecting.

Well..I think, I did everything. I have followed all instructions recommended by HP. I have updated and installed latest drivers. I have even searched the warez sites to find a trick. Useless, useless and useless.
Hardware is retina display with 256 GB SSD, 1600 mGz 8 GB ram and I7 processor. OSX version is 10.8.3
HP 4000 series scanners are not detecting by this machine. Vuescan is detecting but the scanning quality is also terrible.
Strange. I have nothing to say.

For the Scanjet 4850, follow the link below and click on the instructions tab. It looks like you have to get the software and drivers for 10.6 and run a patch to make them work with 10.8. That should get the scanner installed and working.
Scanjet Software Patch to Use OS X 10.6 Software and Driver on OS X 10.7 and 10.8
For the Scanjet G4050, all you should need to do is install the driver from the link below to be able to use the scanner with image capture and other similar products.
HP Scanjet ICA Software for Mac OS X 10.6.8, 10.7 or 10.8
Let me know what happens.
I am a printer tech for HP.

Document from last posting run in 2007 are not yet updated

Hi Guru's,
When I run the AJRW fiscal year change 2009, it was not successful because a system message says" fiscal year change in company code XXX, possible only after year end closing 2007.
So I execute AJAB-Year End closing in 2007, in Tab " Closed Carried Out - it say "NO", when i double click it says: "Document from last posting run in 2007 are not yet updated"
So i check it in SM35 to see when did this error started, i found out it started at around mid 2007, July, status is In background instead of Processed. Out of 15 thousand transaction, 14 of which got an error.
Please help how we are able to post asset accounting for 2009.
Thanks
Mila
Edited by: Mila Calonge on May 4, 2009 10:02 AM

check the error log why the transactions are not processed. Recreate the session with transaction code AFBD giving the year and fiscal period and check the error log. It will give the clue why the transactions are not processed.
Those might not have processed due to GL account assignment or cost center master data issues.

Views are not being updated

Hello All,
I am a newbie to oracle dB.
I have an old VB6 application code that used to "talk" with Oracle dB (version 10g). The 2 machines used to be connected using the Microsoft ODBC for Oracle driver ("Provider=MSDASQL.1"). It used to run fine and all the dB's Views were updated automatically. We recently updated our Oracle to 11g running on Windows2008 r2 64bit machine. We are no longer using the Microsoft ODBC driver but the Oracle client (OraClient11g home1). The VB6 application seems to work OK, see all the records and all BUT, I noticed that all our Views are not being updated automatically anymore. I was wondering if any of you have any idea as to why this is happening and what should I do? I can always go back to the code and force the update on the all the Views but, I was hoping for a quick connection settings tweak if existed.
Thanks
g

837748 wrote:
Hello All,
I am a newbie to oracle dB.
I have an old VB6 application code that used to "talk" with Oracle dB (version 10g). The 2 machines used to be connected using the Microsoft ODBC for Oracle driver ("Provider=MSDASQL.1"). It used to run fine and all the dB's Views were updated automatically. We recently updated our Oracle to 11g running on Windows2008 r2 64bit machine. We are no longer using the Microsoft ODBC driver but the Oracle client (OraClient11g home1). The VB6 application seems to work OK, see all the records and all BUT, I noticed that all our Views are not being updated automatically anymore. I was wondering if any of you have any idea as to why this is happening and what should I do? I can always go back to the code and force the update on the all the Views but, I was hoping for a quick connection settings tweak if existed.
Thanks
gWhat evidence do you have that views are not being 'updated'? Are you talking about materialized views? A normal view has nothing to 'update'. A view contains no data. It is nothing but a pre-defined query.

Docsis 2.0 and 1.1 cable modems are not detected via UBR-MC20X20V-5D line card

Hi All,
We have uBR10K series CMTS and recently installed UBR-MC20X20V-5D line card, requirement is to configure this line card to support docsis 1.1 and 2.0. Problem is after finished the configurations modems (Hitron and Motorola) are not detected by the system. means no modem mac address listing under "Show cable modem" command.
Our CMTS has the following components
ESR-PRE2: x1
ESR-PRE-MEM-FD128: x1
UBR10-DTCC: x2
UBR-MC20X20V-5D: x1
iOS version: 12.2(33)SCE3
Part of running-config as follows
cable spectrum-group 13 band 22800000 26600000
controller Integrated-Cable 8/0/0
rf-channel 0 cable downstream channel-id 145
rf-channel 0 frequency 501012500 annex B modulation 256qam interleave 32
rf-channel 0 rf-power 59.0
no rf-channel 0 rf-shutdown
interface Cable8/0/0
no cable packet-cache
cable bundle 1
cable upstream max-ports 4
cable upstream 0 connector 0
cable upstream 0 spectrum-group 13
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 docsis-mode tdma
cable upstream 0 minislot-size 2
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 21
no cable upstream 0 shutdown
diag output attached herewith. Please any one advice on how to resolve this issue.
Thanks in advance.

Hi All,
We have uBR10K series CMTS and recently installed UBR-MC20X20V-5D line card, requirement is to configure this line card to support docsis 1.1 and 2.0. Problem is after finished the configurations modems (Hitron and Motorola) are not detected by the system. means no modem mac address listing under "Show cable modem" command.
Our CMTS has the following components
ESR-PRE2: x1
ESR-PRE-MEM-FD128: x1
UBR10-DTCC: x2
UBR-MC20X20V-5D: x1
iOS version: 12.2(33)SCE3
Part of running-config as follows
cable spectrum-group 13 band 22800000 26600000
controller Integrated-Cable 8/0/0
rf-channel 0 cable downstream channel-id 145
rf-channel 0 frequency 501012500 annex B modulation 256qam interleave 32
rf-channel 0 rf-power 59.0
no rf-channel 0 rf-shutdown
interface Cable8/0/0
no cable packet-cache
cable bundle 1
cable upstream max-ports 4
cable upstream 0 connector 0
cable upstream 0 spectrum-group 13
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 docsis-mode tdma
cable upstream 0 minislot-size 2
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 21
no cable upstream 0 shutdown
diag output attached herewith. Please any one advice on how to resolve this issue.
Thanks in advance.

Cross-client customizing are not permitted

Hi,
I am trying to remove "Transformation Object" in BI 7.0, QA server, and it not allowe to me access, I have SAP_ALL access
I am getting this error messages:
"changes to repository or cross-client customizing are not permitted"
I know we can't change anyitng in QA its goes through Transport, but the problem is DEV system this objects didn't show and QA this objects shows, so I want to remove this bi object from QA system
I know while installation NW 2004s its post installation steps to not change objects
in SE06 I am trying to change these objects to modifible but still not allow to changeable
please help me out

Hi Angeline,
In transaction SCC4 double click the client on which you are working. There will be a setting "Changes to repository or cross-client customizing are not permitted." Modify this option to "Automatic recording of changes."
Making that will allow you to delete the object.
Make sure after you achieve your desired objective, you revert back the client settings to "Changes to repository or cross-client customizing are not permitted." Also revert back the settings in SE06 in QA to the original what you had in post installation.
Regards
Sourabh Majumdar

Error Changes to Repository or cross-client Customizing are not permitted

Hi
While creating infoset in SQ02 it is giving an error as "Changes to Repository or cross-client Customizing are not permitted"
I did change the SE06 system change options , software components modifiable.
And I also changed the objects changebility in transport connections in RSA1. But still it is giving the same error.....
Can you please let me know the solution?
Thanks

I'm assuming that you're creating a custom InfoCube query, so does it give you the option of creating as a Local Object (package $TMP) or one of your custom, transportable packages? Basically it's determining whether you want this InfoSet Query to be a Local Object or if you plan on transporting it throughout the landscape.
One other thing that I wanted to point out about security. SAP_ALL doesn't necessarily mean access to anything and everything. There are cases where the Authorizations assigned to an SAP_ALL Authorization Object don't necessarily have all of the correct assigned Activity for every transaction. Security, in your case, doesn't seem to be the problem because you're getting this request to assign a package.
Edited by: Dennis Scoville on Nov 4, 2009 2:39 PM

The operating system can not detect my wireless device!

Hi all,
I am using windows server 2008 for the operating system and lenovo 3000 G430 for the laptop. but the operating system can not detect wireless device, on devices manager always show the drivers for this device are not installed! i tired for find and search the right driver. anyone have same problem with me and have solving this problem? or at least has same equation the operating system and the laptop series.

The problem is you have 2008 server on your laptop. The only thing you really can do is try all the wireless drivers here http://consumersupport.lenovo.com/ot/en/driversdownloads/drivers_list.aspx?categoryid=486030
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Few keyfigures are not getting updated in the backup cube

Hi,
We run the daily backup process chain which extract data from planning
area and store in the cube & ods.
There are infopackages which update cube & ods, the datasource & info
source is same for both ODS & backup cube.
But a few keyfigures do not get updated in backup cube where as we see
ODS getting updated for those keyfigures. Also there exist data in the
planning area for these keyfigures.
There is direct mapping between the keyfigures in cube & planning area.
We tried to debug it and noticed that data gets updated in update routine table but not get updated in cube.
There are total 25 keyfigures in the cube , out of this only 5 keyfigures are not getting updated.
Need expert opinion on this.
Regards,
Chetana

Hi Chetana,
Check the backup step in your process chain. The Data Selection tab may have certain conditions on account of which certain keyfigures in your Backup Cube are not getting updated.
Check if any ABAP routine or any selection conditions are maintained which are causing certain keyfigs to be excluded.
~Rishi

HIREDATE & FIREDATE of Employee are not getting updated in t-code PA20.

Hi all,
HIRE DATE & FIRE DATE are not getting updated whenever the data of an employee loaded into SAP T-Code PA20 .
And even the input data contains the both the fields HIRE DATE & FIRE DATE
Can any one please suggest us why its happening.
Thanks,
Lava.

Hi Girishkg,
The default IIS limit for the upload file size is 30MB. If the selected files are larger than 30MB, the files are not uploaded.
The limit can be set in web application’s web.config file or in IIS .
There are two detailed articles about setting the limit:
http://www.brainlitter.com/2009/07/13/sharepointcannot-upload-documents-larger-than-30mb-on-windows-server-2008-or-sbs-2008-application-servers/
http://expectedexception.wordpress.com/2011/02/08/upload-multiple-files-fail-without-error/
Feel free to reply if the issue still exists.
Best regards
Wendy Li
TechNet Community Support

WSUS SP2 Client Systems are not detecting Updates,

Similar Messages

Maybe you are looking for