Wt r the diff design alternatives for an infocube

pls give a brief description

Hi ,
The design alternatives for an infocube is set while constructing statistics in the statistics
IF u go to Tcode RSDDSTAT u can find the answer for ur question
Pls assign me full points if answer satisfied to you
Regards ,
Subash Balakrishnan

Similar Messages

Hi, i am a littl confused as I logged into creative cloud and bough the in design plan for a year but i cant seem to donwload it... there is a window that pops up and it says its downloading but its taking forever? any advice?

hi, i am a littl confused as I logged into creative cloud and bough the in design plan for a year but i cant seem to donwload it... there is a window that pops up and it says its downloading but its taking forever? any advice?

Hi Dima,
Please refer to the help documents below:
Troubleshoot Creative Cloud download and install issues
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena

How to sort out error downloading perpetual license of the CS6 Design Standard for MAC: JRun Servlet Error 413 Header Length too Large?

How to sort out error downloading perpetual license of the CS6 Design Standard for MAC: JRun Servlet Error 413 Header Length too Large?
Just bought the perpetual license online - student-teacher version. Received email confirming my eligibility and followed all instructions to a 't', but still got this 413 error message, and cannot continue.
Would anyone be able to help me?
Or how can I get in touch with Adobe themselves?
How do you get to the chat? I bought it with their help, but cannot remember how to get there again. Took me ages to find the chat.
Cheers!!! Thanks a million! Any help is welcome!!!!

Make sure you have cookies enabled and clear your browser's cache before you try downloading. If it continues to present that error try using a different browser.
As far as getting to a chat link goes, it can be hit or miss... Start Here If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

What is the best design pattern for this problem?

No code to go with the question. I am trying to settle on the best design pattern for the problem before I code. I want to use an Object Oriented approach.
I have included a basic UML diagram of what I was thinking so far.
Stated simply, I have three devices; Module, Wired Modem, and Wireless Modem.
In the Device Under Test parent class, I have put the attributes that are variable from device to device, but common to all of them.
In the child classes, I have put the attributes that are not variable to each copy of that device. The attributes are common across device types. I was planning to use controls in the class definition that have the data set to a default value, since it doesn't change for each serial number of that device. For example, a Module will always have a Device Type ID of 1. These values are used to query the database.
An example query would be [DHR].[GetDeviceActiveVersions] '39288', 1, '4/26/2012 12:18:52 PM'
The '1' is the device type ID, the 39288 is the serial number, and the return would be "A000" or "S002", for example.
So, I would be pulling the Serial Number and Device Type ID from the Device Under Test parent and child, and passing them to the Database using a SQL string stored in the control of the Active Versions child class of Database.
The overall idea is that the same data is used to send multiple queries to the database and receiving back various data that I then evaluate for pass of fail, and for date order.
What I can't settle on is the approach. Should it be a Strategy pattern, A Chain of Command pattern, a Decorator pattern or something else.
Ideas?

elrathia wrote:
Hi Ben,
I haven't much idea of how override works and when you would use it and why. I'm the newest of the new here.
Good. At least you will not be smaking with a OPPer dOOPer hammer if I make some gramatical mistake.
You may want to look at this thread in the BreakPoint where i trie to help Cory get a handle on Dynamic Dispatching with an example of two classes that inherit from a common parent and invoke Over-ride VIs to do the same thing but with wildly varying results.
The example uses a Class of "Numeric" and a sibling class "Text" and the both implement an Add method.
It is dirt simple and Cory did a decent job of explaining it.
It just be the motivation you are looking for.
have fun!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

What is the best design pattern for top-down ws development..?

Hi,
What is the best design pattern for top-down development+ wsdl2service....?

elrathia wrote:
Hi Ben,
I haven't much idea of how override works and when you would use it and why. I'm the newest of the new here.
Good. At least you will not be smaking with a OPPer dOOPer hammer if I make some gramatical mistake.
You may want to look at this thread in the BreakPoint where i trie to help Cory get a handle on Dynamic Dispatching with an example of two classes that inherit from a common parent and invoke Over-ride VIs to do the same thing but with wildly varying results.
The example uses a Class of "Numeric" and a sibling class "Text" and the both implement an Add method.
It is dirt simple and Cory did a decent job of explaining it.
It just be the motivation you are looking for.
have fun!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

What is the best design pattern for multiple instruments?

I have several PXI cards (DMM, O-scope, etc) that I want to create a master panel that can control all of the instruments individually, though not necessarily all at the same time (turn "instruments" on and off at will while the master vi continues to run). Is there one design pattern (master/slave, producer/consumer, etc.) that works better than another for this type of master panel? Are there other alternatives for this type of problem (VI Server, etc)?
I was hoping that I could save a bunch of time if I could start on the right path right off the bat!
Thanks,
-Warren

elrathia wrote:
Hi Ben,
I haven't much idea of how override works and when you would use it and why. I'm the newest of the new here.
Good. At least you will not be smaking with a OPPer dOOPer hammer if I make some gramatical mistake.
You may want to look at this thread in the BreakPoint where i trie to help Cory get a handle on Dynamic Dispatching with an example of two classes that inherit from a common parent and invoke Over-ride VIs to do the same thing but with wildly varying results.
The example uses a Class of "Numeric" and a sibling class "Text" and the both implement an Add method.
It is dirt simple and Cory did a decent job of explaining it.
It just be the motivation you are looking for.
have fun!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

What is the best iTunes alternative for a 4th Generation iPod Touch?

iTunes is the worst music application I have ever used and would love to be able to use a different application to sync music with. I have a really nice computer, but it is taking 10 times longer to sync music than Windows Media Player. I'm beginning to understand all the hate people have for Apple, besides how over-priced all their products are.

white_dynamite wrote:
Found one.
Are you sure? That doesn't look (to me) as though it's suitable for managing an iPod.
I'm guessing, since you mention Windows Media Player, that you have been using it for a while and have just bought yourself an iPod. In that case, you simply need to get used to iTunes, in the same way as a car driver needs to get used to a new vehicle or a new employee has to get used to the demands of his or her new job.
I find iTunes much better for managing the device it has been designed to work with (Apple products) than anything that other MP3 players or Portable Media Players use. Often the software used to manage other MP3 players isn't specifially designed for the device at all and it can be like forcing a round object into a square hole.
Try understanding how you can get can get the best out of iTunes instead of trying to make it do what Windows Media Player does.

What are the best design requisites for a Query design?

Hi Guru's
Could you please let me know,which item will execute first when you run a query,I mean Calculated keyfigure,restricted keyfigure or formula e,t,c...How does it effects the Query performance?What are the design requisites to optimise better query performance?
Thanks in advance,
rgds,
Srini.

Hi Srinivas....
The design of queries can have a significant impact on the performance.
Sometimes long running queries are the result of poor design, not just the amount
of data. There are a number of design techniques that developers can use to
provide optimal query performance.
For example, in most cases characteristics should be placed in the rows and key
figures in the columns. A characteristic should only be used in the columns in
certain circumstances (like time). Characteristics having potentially many values
(such as 0MATERIAL) must not be added to the columns without a filter or
variables. Alternatively, it can be integrated into the query as a free characteristic
enabling it to be used in navigation.
If a relatively detailed time characteristic, such as calendar day (0CALDAY) is
added to the rows, the more aggregated time characteristics (such as calendar
month (0CALMONTH)) and calendar year (0CALYEAR) should also be included
in the free characteristics of the query. For most reports, a current period of time
(current month, previous or current calendar year) is useful. For this reason, the
use of variables is particularly relevant for time characteristics.
To improve query performance
1) Variables and drop down lists can improve query performance by making the
data request more specific. This is very important for queries against Data Store
Objects and InfoSets, which are not aggregated like InfoCubes.
2) When using restricted key figures, filters or selections, try to avoid the Exclusion
option if possible. Only characteristics in the inclusion can use database indexes.
Characteristics in the exclusion cannot use indexes.
3) When a query is run against a MultiProvider, all of InfoProviders in that
MultiProvider are read. The selection of the InfoProviders in a MultiProvider
query can be controlled by restricting the virtual characteristic 0INFOPROVIDER
to only read the InfoProviders that are needed. In this way, there will be no
unnecessary database reads.
4) Defining calculated key figures at the InfoProvider level instead
of the query level will improve query runtime performance, but may add
time for data loads.
5) Cell calculation by means of the cell editor generates separate queries at query
runtime. Be cautious with cell calculations.
6) Customer-specific code is necessary for virtual key figures and characteristics.
Check Code in Customer Exits.
7)Using graphics in queries, such as charts, can have a performance impact.
Hope this helps.........
Regards,
Debjani.........

What is the best limewire alternative for 10.4

What is the best alternative ti Limewire for Mac OS X 10.4.11.

None... Don't use it. Most that is available via Limewire is illegal, not to mention can open yourself up to hacked versions of software being sent your way. Get the genuine article from http://www.macupdate.com/ or C!Net's replacement for http://www.versiontracker.com/ Do not use MacKeeper either, as that is malware.

What are the Photoshop design dimensions for Dreamweaver fluid grid layout?

If I were to build a website using Dreamweavers fluid grid layout, what are the dimensions in Photoshop I should be designing with?

FluidGrid Layouts are based on % widths; not fixed pixel widths. As such your PShop design comps will need to be planned with these device widths in mind.
320px - 480px wide = mobile
481px - 768px width = small tablet
600px - 1024px width = large tablet
1024px - 1233px width = desktop/laptop
Nancy O.

What is the best rated flash alternative for iPad?

What is the best rated alternative for adobe flash for the iPad?
<Edited by Host>

If you want ratings, why haven't you gone to the App Store, searched and read the reviews?

What can be the Tech design for the following functional points

Hi All,
What can be the Technical Design preparation for the below Functional Design Points!
1. Search table Z100
Select all records where
Status (Z100-ZSTATUS) = G
Date (Z100-ZDATE ) = current month minus 1
Total price (Z100-ZTOTPR) => $5000.
Select Z100-MATNR
List Z100-MATNR and ZTOTPR
2. Then, for each MATNR, list all equipment records where
Equipment type (EQUI-EQTYP) = S
List Material (EQUI-MATNR)
WBS (EQBS-PS_PSP_PNR)
UID (EQUI-UIINR)
Serial Number (EQUI-SERNR)
3. Then compare the equipment record WBS (EQBS-PS_PSP_PNR) to the Contract Line Item WBS (VBAP-PS_PSP_PNR)
From VBAP, select the Sales Document (VBAP-VBELN) and Contract Line Item (VBAP-POSNR)
4. Then compare the Sales Document on VBAP (VBAP-VBELN) to the Sales Document on VBAK (VBAK-VBELN).
From VBAK, select the UID indicator (VBAK-UID) and Contract Number (VBAK-BSTNK).
5. If VBAK-UID is initial, go no further. No entry is required to the table.
If VBAK-UID is not initial;
Create 3 new rows on table Z200
6. Select the UID number EQUI-UIINR
If no record exists in table with UID number, create three new rows in table Z200 populate fields per the following table mapping. The table mapping shows default values, or sources in SAP, and parameters if needed. 
Can anybody tell me what is the technical design we can write for above finctional design.
Thanks in advance.
Thanks & Regards,
Prasad.

Hi,
The functional design is very detailed and has covered almost the technical part as well. I dont think you need to add anything more. If you need to add anything then it would probably be the Selects statements. But i dont think they are required.
But once you collect the data in internal table, what should be done. Should it be sent to smartform/script or a report output should be displayed. Or are any tables to be updated.If so, then specify the same.
Best regards,
Prashant

Missing Features in the new design preview

So today Microsoft officially unveiled the new design preview for Skype for Windows desktop that we have been able to test on a field trial basis or by manipulating the URL to download.
Apart from the new design, this new version also brings a change in philosophy regarding group conversations and a very impactful removal of features for them.
At first I want to talk about an issue that has been part of the mobile releases for a long time, the removal of names for group conversations. In the good old Skype world, every group conversation had two parts to display the members of a group and the context of conversation that was happening in them, the name and the topic. With the new design though, the option to name your groups is gone. This means that instead of showing a familiar, easy to remember and recognize name, the contact list now shows the topic, a often (maybe?) changing and not representing the members of said conversation, as the name.
My favorite example on why this is bad is the following: Let's say you have more than one group of friends (hey, it happens) on Skype to talk about different things. One is your football club and the others are the chess dudes. You obviously name those groups "The sports guys" and "The chess guys" for your own sanity and ease of use in identifying them in your list. Both groups often have a similar topic set, mostly the date of the next meeting.
Now, with the new design, you are left with two entries in your contact list, both conveniently named "Next meeting at 5pm". Now what? Which one is which? No way to know at a simple glance. You really have to open the group and look at the members list to really know.
As a person who has been using Skype for group conversations for years and years, this really grinds my gears and I have been trying to get the developers attentions in varius threads on this forums, for once in the Android section (http://community.skype.com/t5/Android/Wrong-behaviour-in-group-conversations/td-p/1968699) where this problem has existed for a looong time and over more private channels and app feedback.
Now the only time when you can change the name of a group is when you create it. While in a previous version of the design preview, the option was still called "Change name..." as it is in the Android version, the latest release now correctly shows "Change topic.." because that is what it does, good job! I'd still like to be able to change the name independently from the topic.
The next bug is minor and about group conversation pictures, in the new design, it's no longer possible to add pictures to the header of groups, they just don't show up when you add them also the existing ones don't show in the contact list.

Stanzilla wrote:Now the only time when you can change the name of a group is when you create it. While in a previous version of the design preview, the option was still called "Change name..." as it is in the Android version, the latest release now correctly shows "Change topic.." because that is what it does, good job! I'd still like to be able to change the name independently from the topic.
As I can't edit, I need to mention that I was kinda wrong about that, it reverts to showing the topic instead of the name in the contact list after a while, maybe after it syncs? Anyway, it still does it wrong.

How to handle exception thrown in standard bo method in the workflow design

Hi Experts
 how to handle exception thrown from standard bo method in the workflow design. For example, bo BUS2032, METHOD confirm. If the user cancel it, it will throw exception. In the workflow, how to catch this exception and add corresponding steps in the workflow.

@jrockman li
Try to implement the logic that what ever you are performing in the BO mehtod in a FM and in the FM you have tab with name EXECPTIONS define the execption in that tab.Now in the BO method you call this FM and if the exception occurs by using RAISE you can raise the exception in the FM and based on the number of exceptions your sy-subrc value will be set
so when sys-subrc is not eq 0 then pass a value back t the workflow container., I think this will work.
a sample Snippet for understanding purpose
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
 filename = <path>
 filetype = 'ASC'
IMPORTING
 filelength = lv_len
TABLES
 data_tab = l_txt_tab
EXCEPTIONS
 file_write_error = 1 " If this Exception occurs
 invalid_type = 2
 no_authority = 3
 unknown_error = 4
 OTHERS = 10.
CASE sy-subrc.
WHEN 1. " SY-SUBRC value will be 1 then,
 " Pass or set the value back to the workflow conatiner element
ENDCASE.

BPEL Designer installation for eclipse

How do I get the BPEL designer installation for eclipse, since I cou;dnt find it anywhere, I can download the installation for BPEL Process Manager but not the designer
Thanks
Rasika

that's too bad. I also have wasted some time looking for the eclipse plug in and would have preferred that approach. I've not had good experience with jDeveloper in the past, but even if those issues have been solved, eclipse is a good standard approach that oracle should support

Wt r the diff design alternatives for an infocube

Similar Messages

Maybe you are looking for