WT200 3G - Wireless connection manager says radio is turned off

Can someone please help. I have a WT200 tablet and am trying use/setup the 3G component..
But the Wireless connection manager keeps telling me that the radio is turned off.
There are no switches and i have searched the net for a solution however I have seen the same question but not the answer.
HELP ME! PLEASE!

WT200 tablet does not contain an physical switch to enable WLan. You should ensure that Wireless Communication function (in Win 7 settings) is ON !!!
You can do that in Start -> control panel -> network and internet -> network and sharing center
here tap Set up new connection or network
At least you should go to: Start -> All Programs ->Toshiba -> network & Connectivity -> Wlan indicator settings
and could display the system Wlan connection status

Similar Messages

Solve X200s the wireless radio randomly turned off/disconnected

I had exactly an issue on my x200s. The wireless radio randomly turned off, and Window 7 was frozen, no response. It took me a lot of time to figure it out. Eventually, it worked out.
Please go to "Lenovo access connections", and find the "tools" tab. In the "global setting", uncheck "Allow the wireless lan radio to be turned off when inactive".
This is going to solve your problem. I worked for me.
Hope this help.

FWIW, I think the ThinkVantage software just sucks. On my X200 the wifi would drop constantly, every 3 to 5 minutes. Driver upgrade, software upgrade, settings etc didnt change anything. I wiped the entire hard drive and installed linux, and I haven't seen a drop since. Maybe try just using the windows wifi to manage your connections. It could also be related to the power management dropping the wifi, which would also be the ThinkVantage.

Ipad is not restored.. it almost done loading and.it.say There was problem downloading the software for the ipad. the network connection was reset.. i turn off the firewall and antivirus

ipad is not restored.. it almost done loading and.it.say There was problem downloading the software for the ipad. the network connection was reset.. i turn off the firewall and antivirus.. It was almost donnIe like 5% away to be finish...

Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799

Radio Randomly Turns Off

I've had this issue on the 8330 and 8130 a few times. The radio on the device randomly turns off when the battery has a full charge and the device is receiving a good signal from the towers. What causes the radio to turn off like this? Is there a way to correct this without ordering a new phone for the customer?
We have done so much with so little for so long that now we can do anything with nothing.

I've never seen that issue with an 8330 or an 8130 before, only think I can say is the batterys are some how defective. Obviously if a battery gets low enough, the radio will turn off.
If someone helped you give them kudos. Research all info!

TS3367 When trying to use FaceTime I can't because it says it is turned off in settings, it then ask do I want to turn it on , tap for yes and it sits there spinning. Face time is on in settings?

When trying to use FaceTime I can't because it says it is turned off in settings, it then ask do I want to turn it on , tap for yes and it sits there spinning. Face time is on in settings?

Have you tried signing out of your Apple ID, restart the iPad and then start all over again?
Go to Settings>iTunes & App Stores>Apple ID. Tap the ID and sign out. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Then go back to Settings>iTunes & App Stores>Apple ID. Sign in again. Then go to Settings>FaceTime>On. See if it will stay turned on and it it does, sign in and setup.

TS4268 I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off but my acc. is being charged.what to do?

I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off in my phone! i also have reset my phone with all the settings. but when i contacted my carrier, he said that the balance deduction is because of the international messages i have sent, but i have sent NONE! every time i switch on my phone, balance gets deducted. imessage and facetime are all disabled! but then the problem started since yesterday when i tried to activate them but had disabled them all at the next moment! but the charges are still being applicable for some international messages as per my mobile carrier. what to do? is there some problem with my phone or carrier?

I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off in my phone! i also have reset my phone with all the settings. but when i contacted my carrier, he said that the balance deduction is because of the international messages i have sent, but i have sent NONE! every time i switch on my phone, balance gets deducted. imessage and facetime are all disabled! but then the problem started since yesterday when i tried to activate them but had disabled them all at the next moment! but the charges are still being applicable for some international messages as per my mobile carrier. what to do? is there some problem with my phone or carrier?

Got a banner on Firefox that says Cookies are turned off, turn cookies on. How do I do that?

For the first time today a got a banner pop up when I was logging into Firefox that says Cookies is turned off, and that I should turn cookies on. Is that a valid request? How do I turn Cookies on?
Old Geezer

Have you seen the article linked below.
* [[Websites say cookies are blocked - Unblock them]]

TS1398 My ipad is showing a wi-fi network, but will not connect. I've tried turning off and on, and went through the troubleshooting, still nothing. Then I reset network settings as suggested, still nothing. Any ideas?

My ipad is showing a wi-fi network, but will not connect. I've tried turning off and on, and went through the troubleshooting, still nothing. Then I reset network settings as suggested, still nothing. Any ideas?

that is the router I am on now reply to this message from my desktop, the router seems to be working fine, thanks

I own an old PowerBook G3 that turns o only on battery. And, even so, always resets time and date. Whenever I connect the power cable, it turns off.

I own an old PowerBook G3 that turns o only on battery. And, even so, always resets time and date. Whenever I connect the power cable, it turns off. In addition, I a interested in refurbishing my old G3. And, a lesser old G4 LCD that shows a yellow vertical hair-width stripe.
Thank you in advance.

What model PowerBook? The internal PRAM battery has discharged and is not recharging. You'll need to replace the battery. This site has instructions. http://www.ifixit.com/Browse/PowerBook
The PRAM battery is not easy to change on some PB G3 models. I changed the battery on a Wallstreet model. Had to totally disassemble to do it. Bought the replacement battery on eBay.
 Cheers, Tom

My iPhone says iCloud is turned off.

my iPhone says iCloud is turned off. How do I turn it on and sync with Mac Pro?

Settings>iCloud

HT4910 i forgot the password on my iPad; I have it backed up on my Mac, so I saw that I just should back up from iTunes. I tried to do that, but it says to first turn off "Find my iPad", which obviously I cannot do because I don't have my password!! Help

I forgot the password on my iPad; I have it backed up on my Mac, so I saw that I just should back up from iTunes. I tried to do that, but it says to first turn off "Find my iPad", which obviously I cannot do because I don't have my password!! Help!

Have you tried using Find My iPad on a computer to remote wipe your iPad?

IPhone 4 says connected to wifi but shows 3g connection. I've tried turning off 3g - that does enable the wifi logo, but then when I try to connect to something it changes to 2g. Tried resetting network connection in general setting.

I've tried everything.... I see this problem all over the web, but no one seems to have an answer... so I know it's not just me. Laptops and other wireless devices connecting fine, just iPhone 4 has problem.

When you say you have tried "everyihing" that doesn't provide enough information to help you, as one person's "everything" is quite different from another person's "everything". In the absence of knowing what you have tried, the following are the most common causes of this problem.
Turning off 3G will just switch you to EDGE. You can turn off Cellular Data, but that won't make it connect to WiFi if your WiFi isn't working, it will just eliminate all data access to your phone.
Easiest to try answer if it is only your home WiFi, and it works other places: Reboot your router.
Next, update the firmware in your router.
If it doesn't work with any WiFi anywhere first Reset Network settings. If that doesn't fix it, restore the phone using iTunes.
You didn't say what symptoms you got, or when you were trying to use WiFi. You do know that the iPhone turns off WiFi when the phone is on standby to preserve battery, right? So if it only fails to connect to WiFi when you are not actively using it that is normal.

HT204368 Why does connection to a bluetooth device turn off all sounds but the ring tone?

I have a Bernafon bluetooth device that connects via bluetooth to my iPhone 4 running iOS6 and routes the telephone through my hearing aids however, it appears that connecting via bluetooth turns off all sounds other than the incoming call ring tone. This has caused me to miss several time sensitive text messages and emails. Does anyone have a solution?

Without knowing what DAQ Hardware you have and what version of NI-DAQ you are using, it's hard to say exactly how to resolve this. However, I would suggest using the Intermediate and Advanced Digital VIs rather than the Easy VI because you have more control. There are examples that ship with LabVIEW and examples online that should assist you. There is also a KnowledgeBase 24BECT4U that may be helpful.
Regards,
Molly K.
National Instruments
Molly K.
Web Support & Operations Manager
National Instruments

IPad Wi-Fi + 3G is connected to Wi-Fi 3G turned off can't connect.

I have the original iPad and have owned it for quite a while. This seem to have started within the last few weeks. It may have something to do with the upgrade to 4.3.1, I don't know. But I have been told by AT&T twice now in about three weeks that I am running low on my Cellular Data Plan. I buy the 250MB plan and usually use about 200MB a month or less. I have never run out of data before. Most places that I frequent have Wi-Fi. I thought it might have been from one of my apps that is somewhat internet intensive and somehow forced the iPad to us 3G over Wi-Fi. So to save data I turned off the Cellular network to force the iPad to use Wi-Fi. It connects immediately. Then after a while the Wi-Fi symbol in the top left corner disappears and I can no longer connect to the internet. If I check the Wi-Fi in System Preferences, it says that I'm connected to the Wi-Fi to the correct WAP and with good strength.
This appears to be different than the old "can't connect" because the iPad used to ask me to enter the network password. From what I can tell I am connected to Wi-Fi but the iPad refuses to use it preferring the 3G. I have rebooted the device with no affect.
Anyone seen this or know if this is a bug with 4.3.1? Any help is appreciated.
Rob

I had same situation
I did as below and i was fine
go to > Settings>wifi>tap blue arrow beside the network to go to IP & Proxy details
If proxy is higlighted as "OFF" select it to "AUTO"

Modem Setup Says Airport is Turned Off When It's Turned On

I'm trying to set up a new modem/wireless account using Motorola 2247-N8. During the se- up phase it keeps telling me that the AirPort is turned off, when in fact it's turned on and can pick up many wireless networks in my vacinity. This problem keeps kicking me out of the set up phase so I can't even set up the new network. I go into System Prefrences>Networks and the AirPort is there with a green light. What is the problem?

If your MacBook (MB) is able to "see" and connect to other Wi-Fi networks then chances are the AirPort card built-in the MB is not the issue.
By default, your Motorola Netopia gateway device has a local (LAN-side) router IP address of: 192.168.1.254. Your MB will need to be on this local network in order for it to find it. This may require that you temporarily reset your MB to using an IP address, like 192.168.1.100. You can do this via System Preferences > Network > AirPort. Easier still I would recommend that you temporarily connect the MB to the Motorola using an Ethernet cable. The Motorola should assign the MB the proper IP address and you should now be able to access the Motorola's web-based administrator interface.

WT200 3G - Wireless connection manager says radio is turned off

Similar Messages

Maybe you are looking for