WTMG withholding tax conversion

Hello to you all,
Once I run Tcode WTMG withholding tax conversion,
I was surprised to receive an error message FWTM379 "Table T059Z,
country IL, percentage rate for type 06, code 01 (==> long txt)".
The classic WT codes based on the idea that the percentage maintained
within the code itself, different codes for every percentage rate.
The extended WT codes contain maximum percentage per code and the
percentage is maintained within the vendor master record itself.
Based on the different idea, how can we assign the classic withholding
tax codes to the withholding tax types and codes for extended
withholding tax and have the exact percentage (without creating the all
old codes again just as a new one)?
Regards,
Yoav

Hi Yossi,
Please check SAP NOTE:186989 - Changeover withholding tax
Hope this will help you.
Regards
Eugene

Similar Messages

Withholding Tax Certificate (Spain)

Hi,
One of the requirements in the project I am working at the moment is to generate the Withholding Tax Certificate and I can find out the way of generating the print out. The country where the report needs to be generated is Spain. Could anyone give me a hand? since I cannot find a standard form for this.. Do I have to generate a new form copying from an existing one? Is the WH Tax Certificate generated from the tr. S_PL0_09000447 and then this calls the form generated for this report?
Thanks and regards in advance.
F.

Hi
Symptom
Your company code is in Spain and you work with classic withholding tax.
This note is designed to help during the changeover from classic to extended withholding tax for Spain.
Other terms
Withholding tax, QSSKZ, customer, vendor, withholding tax changeover, withholding tax migration, WTMG, WTMIGRATION, classic withholding tax, QST, extended withholding tax, Spain
Reason and Prerequisites
The changeover from classic to extended withholding tax must be performed using a conversion tool (Transaction WTMG).
Solution
Since Release 40B, the extended withholding tax function has been available in the standard system. By changing to the extended withholding tax, it makes using withholding tax on the debit side possible. In addition it is possible to post different withholding tax categories in a document at the same time. You can find more information on the extended withholding tax function in the SAP Library.
It is only possible to change from classic withholding tax to extended withholding tax using a conversion tool.
On no account should you activate the extended withholding tax in your system without using this tool if you have been using the classic withholding tax up to now.
Information concerning the changeover and the changeover tool can be found in Note 337267.
This note describes the creation of the withholding tax types and withholding tax codes and the use of the changeover tool for the country Spain.
However this note does not replace the documentation concerning the withholding tax changeover in the SAP Library (or the Word file during the transport from the SAPServ according to Note 186989), it simply provides additional information for Spain!
1. The following is a list of the withholding tax codes used in classic withholding tax. If the withholding tax codes you are using are called differently, you must take that into account later during the assignment of the withholding tax codes of classic withholding tax to the type/code combinations of extended withholding tax.
Probably the specified withholding tax codes do not agree with those which have you used in classic withholding tax. Since the specified codes are the official ones, first change your Customizing for classic withholding tax such that the specified withholding tax codes are defined for the different withholding tax codes.
2. Define the official withholding tax keys for the country ES in extended withholding tax under Financial Accounting Global Settings --> Withholding Tax --> Extended Withholding Tax --> Basic Settings --> Define Official Withholding Tax Codes:
3. Create the following withholding tax types of extended withholding tax for the country ES:
To create the withholding tax types, select Financial Accounting Global Settings --> Withholding Tax --> Extended Withholding Tax --> Calculation --> Withholding Tax Type --> Define Withholding Tax Type for Payment Posting in the Implementation Guide for Financial Accounting.
Select 'Net amount' in the "Calculation/Base amount" screen area in each case
Select 'W/tax comm. round' in the "Calculation/Rounding rule" screen area in each case
Select 'C/disc pre W/tx' in the "Calculation/Cash discount" screen area in each case
Set the 'Post w/tax amount' indicator in the "Calculation" screen area in each case
Select 'No accumulation' in the "Accumulation type" screen area in each case
Set the 'W/tax base manual', 'Manual w/tax amnt' and 'No cert. numbering' indicators in the "Control data" screen area in each case
Select 'W/tax code level' in the "Define minimum/maximum amounts", "Base amount" screen area in each case
Select 'W/tax code level' in the "Define minimum/maximum amounts", "Withholding tax amount" screen area in each case
Select 'No centr. invoice' in the "Central invoice" screen area in each case
Select 'Minimum Check at Item Level' in the "Minimum Check" screen area or 'No min. base check at item level' in the "Minimum base check" screen area in each case
All the other fields in the withholding tax type must be left unselected.
4. Create the withholding tax codes belonging to the withholding tax types:
To create the withholding tax codes, select Financial Accounting Global Settings --> Withholding Tax --> Extended Withholding Tax --> Calculation --> Withholding Tax Codes --> Define Withholding Tax Codes in the Implementation Guide for Financial Accounting.
Copy the names from the first list (under point 1).
Enter the official withholding tax key (Off. W/Tax Key) in the corresponding field as specified above.
Select the same percentage as defined in the corresponding withholding tax code of classic withholding tax under 'Calculation of the withholding tax base amount' for the percentage subject to tax in the "Base amount" screen area. (the percentage should agree with the above-mentioned percentage subject to tax (%sub.to tax)).
Select the same rate as defined in the corresponding withholding tax code of classic withholding tax under 'Calculation of withholding tax' for the withholding tax rate in the "Calculation" screen area (The rate should agree with the above-mentioned withholding tax rate (WT rate)).
Set value '1' for the Post.indic. in the "Postings" screen area
Select the corresponding settings as in the corresponding withholding tax code of classic withholding tax in the "Reporting information" screen area (The settings should agree with the above-mentioned specifications for region and income type (Inc.type)).
All the other fields in the withholding tax code must remain empty.
Create a withholding tax conversion run:
Call Transaction WTMG
Choose 'Create'
Assign a name to the conversion run
Select change 'Choose Company Codes' and enter the company code to be converted and country 'ES'
Select change 'Type/Code Assignment' and assign the respective new withholding tax types and withholding tax codes of extended withholding tax to the withholding tax codes of classic withholding tax defined for country 'ES':
Execute the 'Analysis'
Select the option 'Several withholding tax types possible per vendor' under 'Master data settings'
Carry out the conversion steps (to start with in the test run).
After the withholding tax changeover has occurred, create the following recipient codes for the country ES to complete Customizing:
To create the recipient code, select Financial Accounting Global Settings --> Withholding Tax --> Extended Withholding Tax --> Reporting --> Define Recipient Code for Extended Withholding Tax in the Implementation Guide for Financial Accounting.

Wrongly Activated Extended Withholding tax before data conversion

Hi all,
In 1099 Reporting for US, I have activated Extended Withholding Tax before conversion of data from Classical to Extended Withholding Tax. I have done this in Development system with transport request.
If anybody has come across similar situation, pl help me with your valuable inputs.
1. Will I be able to deactivate the extended withholding tax and do the data conversion and activate again.
2. If not, what will be the consequences of not doing the data conversion of existing data.
Kindly help me to come out of this crisis.
Thanks in advance.
San.

Hi,
Yes it will be possible.
I haven't really faced this situation in EWT, but in another similar migration.
I do not know the extent of customisation you did for EWT or whether the documents you posted after activating did get posted in the EWT area.
The only place I think you may face will be in the migration itself, where these documents may give you errors is in the actual data migration step. But there would be some solution for that.
You need to see what options you have. Can you let this situation continue? Was this migration not a prep for doing the migration in production or just a test? If not then you will need to do something. This should have no impact on any migration you plan for the other systems (Quality/Production) in the landscape.
You can log in an OSS message just in case.
Cheers...

Extended Withholding tax changeover

Hi, I want to activate extended withholding tax for a company that has not used classic withholding tax. The changeover process only deals with moving from classic to extended. How do i move from nothing to extended ??
transaction WTMG - Company code selection - the system delets company codes for which classic withholding tax has not been used......... so how do I convert the existing data

Hi Dipak,
All invoices posted prior to activating EWT do not get paid - details when displaying the line item within F110 say at the bottom in the Note section "Item cannot be paid due to inconsistent withholding tax information". I tried entering an exemption number on the master record with a date range up to the date of activation, but that makes no difference to the error in F110. If I go into the open items and update them for withholding tax, the items then get paid via F110.
This leads me to believe that all old open items need to be converted.
Regards,
James

Assigning multiple withholding tax codes of the same witholding tax type

As described in note 363650, I have configured a withholding tax type FE to include a range of withholding tax codes of 0% for US 1099 reporting only. I also carried out the conversion to extended withholding and resolved all errors. My requirement is that I need two different withholding tax codes of this type to be open and editable in MIRO and FB60. I am receiving error Message no. 7Q005 when I attempt to add another code of the same type.
What is the best practice for configuring/recording withholding tax in this case?
Example:
Vendor XYZ
Header amount of invoice: $1000.00
Amount relevant for withholding tax type FE code 01: $600.00 (rents)
Amount relevant for withholding tax type FE code 07: $400.00 (nonemployee compensation)
Thanks in advance

Thanks for the input. My problem occurs when attempting to assign the second tax code in the vendor master. The system doesn't allow for the second code of the same type to be added.
I can assign one code in the vendor master without issue, and all fields are editable in the withholding tax tab for the first code, both for invoicces and for payments.
I have been offered one suggestion to configure a differrent range of codes with a new tax type. This would mean that if I had only one vendor relevant for 3 tax codes (rent, royalties, unemployee compensation) then I would have to configure two additional withholding tax types with all the codes associated with them. This doesn't seem like the best approach -- am I missing a setting or some other minor config to solve this?

MIgration to Extended withholding tax

HI Gurus,
We are doing migration from classic withholoding tax to extended withholding tax. when doing the test run for document conversion there were no errors, warnings or stoppages. when we are doing the update run we got a short dump and the dump analysis is as follows:
Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
Except.                CX_SY_OPEN_SQL_DB
Date and Time          08/22/2009 18:01:37
ShrtText
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "WTMIGRATION" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"INSERT_WITH_ITEM" "(FORM)"
Since the caller of the procedure could not have expected this exception
|     to occur, the running program was terminated.
|    The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
|    (With an ABAP/4 Open SQL single record insert in the same error
|    situation, processing does not terminate, but SY-SUBRC is set to 4.)
i observed that the WITH_ITEM table is updated with some documents where the company code is not filled in.
can any body let me know the why and what could be the possible resaon for this.
thanks in advance,
anand k bagavatula
Edited by: Anand K Bagavatula on Aug 29, 2009 5:38 AM

Hi All,
Nobody has not answered my issue.
Otherwise anybody can explain in detail about " MIGRATION PROGRAMME " ( J1INMIG ).
I want details about this last T.Code only i.e. J1INMIG and remaining all the necessary steps I completed.
An early reply will be highly appriciated.
Regards,
K. S. Sai Kumar

Activating Extended Withholding Tax - New Company Code

Hello Gurus, I have a question regarding Extended Withholding Tax that I have not previously seen addressed.
My client is live on ECC 6.0 EHP 5 and would like to activate Extended Wittholding Tax for its Colombian company code which is not yet live.
All existing company codes on the same client are using Classic Withholding Tax, where withholding is needed. This is working well in many countries around the world, but will not satisfy the Colombia legal requirements.
Since Extended Withholding Tax is activated by company code, do we need to perform the Withholding Tax Changeover / Data Conversion steps for all existing entities live on SAP with Classic Wittholding?
Keep in mind that we do not plan to activate Extended Withholding Taxes in any other company code that already has productive data unless we absolutely must.
However, previous questions asked of this nature (and the SAP documentation) had ambiguous replies about whether other Existing company codes are impacted (and must be converted) as a result of activating EWT for a brand new company code with no existing master data or transactional data to be converted.
Thanks for your help.
Guy

Hi Guy,
I believe that you can use extended Withholding tax for new company code without impacting the existing company code with classic WHT configured as my belief is extended WHT is activated at company code level.
Probably you can try to configure colombia in your development system and do some testing for Colombia and negative testing for few company codes with classic WHT.
Thanks and Regards,
Gaurav

Withholding tax Amount not being displayed in the Invoice while posting a Parked Document

Hi,
I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
I am not sure what is the reason for this. Can anybody help me sort out this Issue.
Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data Tab in the Invoice.
Regards,
Deepak.

Dear Praveen,
please check into IMG if You defined the WT type You are using for Your Comapny code:
IMG --> Assign Withholding Tax Types to Company Codes
I hope this helps.
Mauri

Vendor Open items upload- Withholding tax liable tick

Hi all
I have uploaded the Vendor open items. At the time of upload, Withholding tax was activated at the co code level. However, the liable to TDS tick was not checked. Now when I activate the liable tick and go to F-53 to pay the open items, I get an error of Items not activated due to Inconsistent Withholding tax. How do i resolve this error. I think there is a program which we need to execute to correct this. Can any1 help me with the program name?
Thxs in advance
Hrishi

RFWT0010 is a programme to run for Open items adjustment.
Let me know the result.
thanks
prabhakar

Withholding tax not able to view in FBL1N - Vendor Line Item report

Dear All,
The VI documents are posted in different vendors. The Tax code has been duly selected and tax was deducted at the time of posting the entry. When we generate the list of vendor line items using standard report FBL1N, we observe that only some of the VI documents in the output show the withholding tax amount in the respective column whereas in some of the VI documents, the withholding tax amount is appearing as zero even though the tax line item is available in the document (same can be seen in FB03).
Please let us know the possible cause for the same.
Regards,
Anand.Inguva

Dear,
by FBL1N is not possible to check the Extended WT
information due to the technical reasons explained into the note
number 363309.
Furthermore please be aware that by the report RFKQST00 and
RFIDYYWT You can have all the WT details.
I hope this helps You.
Mauri

How to clear line items with withholding tax manually

hi Experts,
i posted a vendor invoice with withholding tax and i made payment as well but not through f-58.
now i wanted to clear these two through f-44 but it gives the message withholding tax information ignored and didnt display the invoice as open item.
how do i clear both the trasactions
regards
suresh

hi Praisty,
thanks for the reply
i have a second opinion on your statement that no matter whatever tcode you use for payment it will clear the open item. Even in F-58, if u make partial payment it will not clear you open item. But i didnt use f-58 as i said earlier.
i used FBV1 for parking the document through which i entered the payment details...ofcourse it doesnt have the option for clearing the open items, cheque printing and it will not update your cheque register. i posted the parked document through FBV0. for all practical purposes, this is my payment document but it didnt clear my open item, in order to clear it i now used f-44.
regards
suresh

Withholding tax line items are not post

Hi,
I was configured all the steps for extended withholding tax up to Assign withholding tax to vendor master data
and the i am used to post an vendor invoice
given all required feild and press enrer and display the withhoding tax codes screen here also press enter button .... i entered all required field and go to simulation this posting i am getting only 2 line items
like for eg: --- Inventory Debit , Vendor Credit only
here my problem is i am not getting the all with holding tax line items
please hepl
Sree

Dear Sree,
if You defined the WT type at the payment time, the WT line items will be created at the payment time and not during the invoice posting.
Please check.
Mauri

Withholding Tax Calculation Error for Vendor Down Payment Clearing:Oct '09

Hi,
We are trying to incorporate the new Withholding Tax Structure w.e.f. 01-Oct-09.
There were 3 scenarios possible:
a. Invoice = Down Payment
b. Invoice < Down Payment
c. Invoice > Down Payment
While 1 & 2 were taken care of effectively, the third scenario did not work as expected. The scenario is as follows:
1. Down Payment (Date : 30/09/09)
Amt : Rs. 40000/-;
Withholding Tax @ 15% : Rs. 6000/- (40000 * 15%)
Surcharge @ 10% : Rs. 600/- (6000 * 10%)
Edu Cess @ 2% : Rs. 132 (Rs. 6600*2%)
Higher Edu Cess @ 1% : Rs. 66 (Rs. 6600*2%)
2. Invoice (Date : 02/09/09) - As per new TDS Rates
Amt : Rs. 50000/-
Withholding Tax @ 10% : Rs. 5000/- (50000 * 10%)
Surcharge : NIL
Edu Cess : NIL
Higher Edu Cess : NIL
3. DPC (Date : 02/09/09) - Reversal of TDS calculated in Down Payment (Step 1) above.
Issue:
While making J1INCHLN, amount is adjusted as Rs. -1000/- (hence zero) not payable.
Also, the Surcharge, Edu Cess & Higher Edu Cess are also getting reversed in DPC.
As suggested by SAP Note No. 1372734 - Handling of downpayment clearing scenarios after budget '09, the scenario does not seem to work.
Actual payable should be worked out as under:
Invoice : Rs. 50,000/-
DP : Rs. 40,000/-
Bal : Rs. 10,000/-
TDS @ 10% : Rs. 1,000/-
All TDS Challans, Certificates & Returns must reflect Rs. 1000/- in the Challan.
Require assistance.
Regards,
Kapil Tilwani

Hi Kapil,
The following needs to be taken care of -
The message controls settings as the note suggests must be set as W.
When entering the details the logic is Vendor Debit amount is Tax amount + 1
The Vendor credit line, the tax code has to be assigned with the advance amount (amount for which the challan has been created) as the tax base amount and the tax amount will be the extra liability that needs to be created.
In your example -
The tax amount will be - 2000 ( the debit at the time of downpayment clearing should have been 4000 instead of 6000)
Tax base amount - 40000 (Challan for this amount has already been made at the time of downpayment made)
The vendor Debit - 2001 (2000 + 1)
The vendor credit - 1
Note - Tax amount and base amount has to be made manually in the withholding Tax tab for the credit entry.
Please revert for any clarification.
Thanks and Regards,
Anit

Payment order are not defined for extended withholding tax

Hi Gurus,
Would you please help me with the message below. It appears on F110 when I try to pay a vendor open item with extended withholding tax:
Message FZ626 -Payment orders are not defined for extended withholding tax
In my company payment orders are created in F110 for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
any help is welcome

The payment method "Y" the option "payment order only" was marked?
For a withholding tax type with accumulation in a company code with extended withholding tax payment
methods that create only payment orders can´t be used. Payment orders can only be created only if there are
no tax types with accumulation involved in the paid items of the payment run.
The functionality extended withholding tax works fine for Brazil
however, you can´t use the payment order with this functionality.
Please, review your customizing for payment method 'Y" in transaction
FBZP.
Best regards,
Leonardo Vedovelli
FI Support Engineer
SAP Active Global Support

Withholding Tax by Line Item (not by vendor)

Hi,
Thereu2019s been more than 1 occasion where clients request for withholding tax at line items (purchase equipment and service in 1 invoice. Equipment no withholding tax but service has withholding tax). However, as far as I know, the withholding tax is applicable by vendor and not by line item of the vendor. Is there any workaround on this?
Regards,
Cheah

If i understand correctly, you have prepared PO for material plus service, service attracts WHT
you could prepare two different vendors - one for material, one for service - even though the vendor is same, and maintain WHT only in service vendor.
under PO there is condition types for service, there you can enter this second vendor who is providing service.
i think this way you issue should get resolved.
Pl share how to finally got thru it.
Thanks
Sanjay

WTMG withholding tax conversion

Similar Messages

Maybe you are looking for