WTR600N FTP server failing
I have a WRT600N with the latest firmware installed (1.01.36 build 3). I am having a lot of stability problems with using the FTP server. I have a Seagate FreeAgent Pro 1TB external HD plugged in via USB. I plugged in the drive went through all of the setup on the router and enabled FTP access. It works fine for 1-3 hours and then starts rejecting my connections. Has anyone experienced this and found a fix to make connections more stable? This happens both wen connected from the LAN and WAN sides of the router.
Thanks in advance,
John
Have you tried using a smaller HD?
I read that WTR600N only supports up to 760gb
Similar Messages
-
FTP Server "Failed to retrieve directory listing"
I am setting up a new FTP site on Server 2012. I can access the site locally but when accessing using filezilla externally I get the error:
Status: Connecting to 203.109.232.97:21...
Status: Connection established, waiting for welcome message...
Response: 220 Microsoft FTP Service
Command: USER ftptest
Response: 331 Password required
Command: PASS **********
Response: 230-Directory has 857,133,400,064 bytes of disk space available.
Response: 230 User logged in.
Command: OPTS UTF8 ON
Response: 200 OPTS UTF8 command successful - UTF8 encoding now ON.
Status: Connected
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/" is current directory.
Command: TYPE I
Response: 200 Type set to I.
Command: PASV
Response: 227 Entering Passive Mode (203,109,232,97,233,180).
Command: LIST
Response: 150 Opening BINARY mode data connection.
Error: Connection timed out
Error: Failed to retrieve directory listing
Have opened ports on firewall but still not working. Not sure what to try nextCheck : http://social.technet.microsoft.com/Forums/windowsserver/en-US/706e5104-325c-4c43-8c06-a20704569bf4/ftp-server-failed-to-retrieve-directory-listing?forum=winservergen
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
Ftp Server Fail - Tried several Times
Dear All
I have read most of the ftp clips but seems unable to work, may experts here assist me if i missed out any steps. Thanks
Device - WRT54G Firmware v4.21.1
Things i have done
1) Disabled Firewall Protection
2i) Installed GuideFTP,
2ii) Port Range Ftp Start 20 End 21 - 192.168.1.102 Enabled
2iii) Port Triggering 20000 - 20200 - 192.168.1.102 Enabled
3) Router Security Firewall protection - Disabled
Result was ftp://202.168.102.158 failed - Unable to connect
Result for ftp://192.168.1.102 works.
May i know which of the setting did i missed out.
Thanks a lot.
Cheers
LokiDid you tried to assign static IP (ex. 192.168.1.10) to the computer on which you want to setup ftp server? And then forward the ports for this ip address on the router. Dont assign ip address which is in the DHCP range of the router. Try doing forwarding first and if it doesnt work then go for triggering.
-
Get running config to ftp server failed
i has already set every one read and write in folder named tin in desktop in window 7, but still can not create file and write file after using ftp
static ip of network card i set 192.168.1.207 in window 7 connected to one of switchport mode access port in switch
first i use filezilla
as01#copy running-config ftp:
Address or name of remote host []? 192.168.1.207
Destination filename [as01-confg]?
Writing as01-confg
%Error writing ftp://192.168.1.207/as01-confg (Undefined error)
then i use tftpd32 , set binding address 192.168.1.207
as01#copy running-config ftp:
Address or name of remote host []? 192.168.1.207
Destination filename [as01-confg]?
Writing as01-confg
%Error writing ftp://192.168.1.207/as01-confg (Undefined error)
then i change to use IIS 's ftp, it can upload file by drag and drop , but right click do not have create file
when i see cisco is writing, i do not know whether it is uploading or creating file and write to itthe switch can ping
as01#ping 192.168.1.207
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.207, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
i have tried tftp
as01#copy system:running-config tftp:
Address or name of remote host []? 192.168.1.207
Destination filename [as01-confg]?
%Error opening tftp://192.168.1.207/as01-confg (Timed out)
tried no passive still failed
noc01as01#sh run | be FastEthernet0/21
ip tftp source-interface FastEthernet0/21
conf t
int FastEthernet0/21
switchport mode access
end
sh run | be FastEthernet0/21
copy running-config tftp:
conf t
no ip ftp passive
ip ftp user noc
ip ftp password 123
end
finally i use wireshark to see, there is no ftp protocol connection with my notebook
then off Macfee IPS, firewall,
and filter with ftp in wireshark , there is no ftp show in wireshark -
FTP server: PORT command not supported??
Hi,
In a nutshell - we are trying to set up PASV -- PORT connection between a Tiger server (10.4.11) and another system (say it's a windows FTP server). Issuing a PORT command to a Tiger FTP server fails with this error:
-> PORT 192,168,11,3,199,158
<- 500 Invalid PORT command
I have done some research on the web and as far as I can see - this is just a feature that is disabled in Mac OS X ftp server.
What's strange is that "features" command states that PORT is supported.
Has anyone seen PORT command work for a Tiger Server ftp daemon?
Has anyone succeeded enabling this command on a Tiger server?
Can you recommend another FTP server that works well on a Tiger server?
Thanks a million,
DariusPassive (PASV) and Port (PORT) mechanisms are orthagonal.
If you're working with PORT, then you're almost certainly trying to clear through one or more firewalls. And a firewall can also trigger the Illegal Port Command error for a PORT command.
(Though I don't see a PORT command in the Mac OS X ftp client. I've checked a couple of clients, and it isn't common to expose it.)
ftp is a mess. Insecure, difficult to configure, insecure, firewall unfriendly, insecure, and slow. And did I mention insecure?
(No, I'm not a big fan of ftp.)
Some reading material:
http://www.cert.org/techtips/ftp_portattacks.html
http://www.slacksite.com/other/ftp.html
http://cr.yp.to/ftp/security.html
As for a suggestion, chuck ftp and switch to sftp. -
Ovmapi_4004e server failed error while creating a PVM from FTP network pat
Hi,
I'm trying to create a PVM on OVM 3.0.3 using an ftp server to use an ISO for a Linux 5 installation.
In the create virtual machine wizard for the network path (in boot options) I am specifying:
ftp://oracle:[email protected]/home/oracle/iso/OEL56/
The above link opens up in a browser and I can see the mounted iso.
I mounted the iso as:
cd /home/oracle
mkdir /iso/OEL56/
mount -o ro,loop /ovm_iso/linux/Enterprise-R5-U6-Server-x86_64-dvd.iso /home/oracle/iso/OEL56/
But Starting the VM fails with "ovmapi_4004e server failed" and "Boot loader didn't return any data". I'm assuming it can't read from the iso during boot.
Is there anything wrong with the ftp path . Are non-anonymous ftp users (oracle in this case) allowed or do I need to use anonymous logon.
Regards,
Shahab.Hi ,
I went a step further by using anyonymous ftp in the network path . (rather than user : password) and the VM started .
The VM boots OK from the staged iso (also tried full DVD contents) and brings up linux installation in text mode only , but for ftp installation mode after asking for the ftp server and directory (which it doesn't take on first attempt) it gives an error "Unable to read package metadata . This may be due to a missing repository directory. Please ensure your install tree has been correctly generated" . It seems its not finding the ftp directory path , although initially it was able to boot from the same ftp path specified in the Network path of the VM configuration wizard.
Regards,
Shahab. -
I have been uploading muse to my server for months...all of a sudden I get an error - Error uploading FTP Host (Failed FTP upload 550) what is this?
Hi,
Your reply is blank. Looks like you tried to insert the screenshot but it didn't come through. Please use the image attachment option in the reply window to insert the screenshot.
Regards,
Aish -
Pretty much what the question says, I managed to type the password wrong when trying to connect to an ftp server and now I cannot connect to the whole website.
Try to clear the Active Logins (Authenticated Sessions) via Tools > [[Clear Recent History]]
-
Error when scheduling WEBI report to FTP server
Hi
We are getting error "destination directory error. CrystalEnterprise.Ftp: 550 Requested action not taken" while scheduling WEBI report to FTP server.
Any help would be appreciated
Regards,
AnisaHi All,
I want a run my report once by scheduling, so i provide a time interval for scheduling a report
start date/ time : 11:38:AM 10/30/2011
end date/time : 11:43:AM 10/30/2011
after completion of end time....report is failed and fetching an error
Error : Object could not be scheduled within the specified time Interval
Any solution for resolving this error -
Can't copy file from SAP-directory to FTP server
Hello,
I can't copy files from the SAP server to the FTP server. The file is created with OPEN DATASET and CLOSE DATASET commands and is placed in the SAP-directory S:\usr\sap\DEV\DVEBMBGS00\work.
I can see and read the file with transaction al11, so I know it's there.
But the FTP command always gives the same error:
S:\usr\sap\DEV\DVEBMBGS00\work\[FILENAME] errno 22: invalid argument
I can connect to the FTP, but the put command keeps failing. Somehow, the file in the SAP directory can't be read, it seems, even when
Any ideas?
Thanks in advance.
DaveOk, I found out that I have to use SAPFTPA as RFC destination type, instead of SAPFTP, otherwise the folders can't be located.
But with SAPFTPA I can't seem to connect to the FTP server. I've tested the connection with sm59 and it works, but for the FTP it doesn't work. When I use SAPFTP as destination type, it still works.
What can I do?
Thanks. -
How to implement logger in this ftp server
I have written a FTP Server that is used by the clients to upload xml over to the server.
Currently it is using a console and it is printing stuff out on a console.
I have tried a lot to implement a logger class so that all console messages get written to a file.
But it has not been working out at all.
I would deeply appreciate if all you java gurus out there could modify the code given below to correctly log messages to a log file.
Please do Explain if possible ...I will try to rectify this issue in several other applications i developed as well.
import java.net.*;
import java.io.*;
import java.util.*;
import java.util.Date;
import java.text.SimpleDateFormat;
import java.text.DateFormat;
import java.text.Format;
import java.lang.Object;
import java.lang.*;
import javax.crypto.*;
import javax.crypto.spec.PBEKeySpec;
import javax.crypto.spec.PBEParameterSpec;
import java.security.spec.AlgorithmParameterSpec;
import java.security.spec.KeySpec;
public class FTPServer
{ public static void main(String args[]) throws Exception
{ ServerSocket soc=new ServerSocket(5217);
System.out.println("FTP Server Started on Port Number 5217");
while(true)
System.out.println("Waiting for Connection ...");
transferfile t=new transferfile(soc.accept());
class transferfile extends Thread
Socket ClientSoc;
DataInputStream din;
DataOutputStream dout;
transferfile(Socket soc)
{ try
{ ClientSoc=soc;
din=new DataInputStream(ClientSoc.getInputStream());
dout=new DataOutputStream(ClientSoc.getOutputStream());
System.out.println("FTP Client Connected ...");
System.out.println("External IP of Client ..." + ClientSoc.getInetAddress());
//System.out.println("FTP Client Connected ..." + ClientSoc.getRemoteSocketAddress());
start();
catch(Exception ex)
//encrypto routine starts
class DesEncrypter {
Cipher ecipher;
Cipher dcipher;
// 8-byte Salt
byte[] salt = {
(byte)0xA9, (byte)0x9B, (byte)0xC8, (byte)0x32,
(byte)0x56, (byte)0x35, (byte)0xE3, (byte)0x03 };
// Iteration count
int iterationCount = 19;
DesEncrypter(String passPhrase) {
try {
// Create the key
KeySpec keySpec = new PBEKeySpec(passPhrase.toCharArray(), salt, iterationCount);
SecretKey key = SecretKeyFactory.getInstance(
"PBEWithMD5AndDES").generateSecret(keySpec);
ecipher = Cipher.getInstance(key.getAlgorithm());
dcipher = Cipher.getInstance(key.getAlgorithm());
// Prepare the parameter to the ciphers
AlgorithmParameterSpec paramSpec = new PBEParameterSpec(salt, iterationCount);
// Create the ciphers
ecipher.init(Cipher.ENCRYPT_MODE, key, paramSpec);
dcipher.init(Cipher.DECRYPT_MODE, key, paramSpec);
} catch (java.security.InvalidAlgorithmParameterException e) {
} catch (java.security.spec.InvalidKeySpecException e) {
} catch (javax.crypto.NoSuchPaddingException e) {
} catch (java.security.NoSuchAlgorithmException e) {
} catch (java.security.InvalidKeyException e) {
// Buffer used to transport the bytes from one stream to another
byte[] buf = new byte[1024];
public void encrypt(InputStream in, OutputStream out) {
try {
// Bytes written to out will be encrypted
out = new CipherOutputStream(out, ecipher);
// Read in the cleartext bytes and write to out to encrypt
int numRead = 0;
while ((numRead = in.read(buf)) >= 0) {
out.write(buf, 0, numRead);
out.close();
} catch (java.io.IOException e) {
public void decrypt(InputStream in, OutputStream out) {
try {
// Bytes read from in will be decrypted
in = new CipherInputStream(in, dcipher);
// Read in the decrypted bytes and write the cleartext to out
int numRead = 0;
while ((numRead = in.read(buf)) >= 0) {
out.write(buf, 0, numRead);
//added later on
in.close();
out.close();
} catch (java.io.IOException e) {
} //encryptor routine ends
//not implemented right now as we arent using the ftp server to download stuff...can be activated later on if we want
void SendFile() throws Exception
String filename=din.readUTF();
File f=new File(filename);
if(!f.exists())
dout.writeUTF("File Not Found");
return;
else
{ dout.writeUTF("READY");
FileInputStream fin=new FileInputStream(f);
int ch;
do
ch=fin.read();
dout.writeUTF(String.valueOf(ch));
while(ch!=-1);
fin.close();
dout.writeUTF("File Received Successfully");
String Compare(String filename) throws Exception
///dout.writeUTF("entering compare");
String dateTempString=new String();
Date dateValue=new Date();
SimpleDateFormat formatter = new SimpleDateFormat ("hhmmss");
dateTempString = formatter.format(dateValue);
File dir1 = new File("C:\\FTPnew");
boolean success2 = dir1.mkdir();
if (!success2) {
// Directory creation failed /Already Exists
File dir = new File("C:\\FTPnew\\server");
boolean success = dir.mkdir();
if (!success) {
// Directory creation failed /Already Exists
File ftemp=new File(dir,dateTempString + filename);
File fnewtemp=new File(dir,"new-enc-"+filename);
// Create encrypter/decrypter class
DesEncrypter encrypter = new DesEncrypter("My Pass Phrase!");
FileOutputStream fout=new FileOutputStream(fnewtemp);
int ch;
String temp;
do
{ temp=din.readUTF();
ch=Integer.parseInt(temp);
if(ch!=-1)
fout.write(ch);
}while(ch!=-1);
fout.close();
//dout.writeUTF("written temp en file");
// Decrypt
encrypter.decrypt(new FileInputStream(fnewtemp),
new FileOutputStream(ftemp));
//String Option;
dout.writeUTF("Delete");
System.out.println("File Upload Successfull--Duplicate file with timestamp Created");
boolean success1 = fnewtemp.delete();
return "hello" ;
void ReceiveFile() throws Exception
String ip=din.readUTF();
System.out.println("\tRequest Coming from Internal IP Address : "+ ip);
String filename=din.readUTF();
if(filename.compareTo("File not found")==0)
return;
// Destination directory
File dir11 = new File("C:\\FTPnew");
boolean success22 = dir11.mkdir();
if (!success22) {
// Directory creation failed /Already Exists
File dir = new File("C:\\FTPnew\\server");
boolean success21 = dir.mkdir();
if (!success21) {
// Directory creation failed /Already Exists
File f=new File(dir ,"enc-"+filename);
File fe=new File(dir,filename);
String option;
if(fe.exists())
//dout.writeUTF("File Already Exists");
String compvalue = Compare(filename);
//dout.writeUTF(compvalue);
if(compvalue.compareTo("hello")==0)
//dout.writeUTF("Transfer Completed");
return;
option=din.readUTF();
else
//dout.writeUTF("SendFile");
option="Y";
if(option.compareTo("Y")==0)
// Generate a temporary key.
// Create encrypter/decrypter class
DesEncrypter encrypter = new DesEncrypter("My Pass Phrase!");
FileOutputStream fout=new FileOutputStream(f);
int ch;
String temp;
do
{ temp=din.readUTF();
ch=Integer.parseInt(temp);
if(ch!=-1)
fout.write(ch);
}while(ch!=-1);
fout.close();
// Decrypt
encrypter.decrypt(new FileInputStream(f),
new FileOutputStream(fe));
boolean success2 = f.delete();
dout.writeUTF("Delete");
System.out.println("File Upload Successfull");
else
return;
public void run()
while(true)
try
String Command=din.readUTF();
if(Command.compareTo("SEND")==0)
System.out.println("\tSEND Command Received ...");
ReceiveFile();
continue;
catch(Exception ex)
//System.out.println("\tClient Terminated Abnormally ...........");
continue;
}Stick a
Logger log = Logger.getLogger( "me ftp server" );at the top.
Checn Sys.out.println to log.info( ... )
Add a logging prefs file.
http://java.sun.com/j2se/1.4.2/docs/guide/util/logging/overview.html -
Can a directory to be created if it does not exist on FTP server?
Hello SOA experts,
We are good with most common usage of all Adapters. But recently, I am facing a challenge when archive files on FTP server.
Archive files need to be placed into different folders for each month. For instance, ./archive/201308 for files archived in August. Next month, a new directory ./archive/201309 should be created, ideally automatically.
My question is, can I do through some configuration and properties setting to let SOA create a remote target directory when it does NOT exist?
We maintained multiple archive folders for different typr of documents. It is really a hassle to create them manually. And if the target directory does not exist, it would throw errors.
Thank you very much in advance.
Alena Li
CGIHi, After reading your post, I myself wanted to test this out. I thought that by configuring the following in the Adapter Wizard it would create the remote directory for me:
<adapter-config name="FW" adapter="File Adapter" wsdlLocation="FW.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter"/>
<endpoint-interaction portType="Write_ptt" operation="Write">
<interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
<property name="PhysicalDirectory" value="C:\Archive"/>
<property name="Append" value="false"/>
<property name="FileNamingConvention" value="%SEQ%\test.txt"/>
<property name="NumberMessages" value="1"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
It failed on my BPEL instance however I could see that it was trying to create the file. When I created all destinations it was able to create it.
This is my recommendation from what I understand you'd like to accomplish:
Create the different Year&Month folders on your destination from Jan to Dec:
201301
201302
201303
201304
201305
201306
201307
201308
201309
201310
201311
201312
(You can actually create as many as you want going to 2090 if you want...
Add the below config to your JCA File:
<adapter-config name="FW" adapter="File Adapter" wsdlLocation="FW.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter"/>
<endpoint-interaction portType="Write_ptt" operation="Write">
<interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
<property name="PhysicalDirectory" value="C:\Archive"/>
<property name="Append" value="false"/>
<property name="FileNamingConvention" value="%yyyy.MM%\filename"/>
<property name="NumberMessages" value="1"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
This will allow the files to be dynamically created in the correct directories.
This is a work-around and I hope this works for you. -
Need Help to locate a file on a FTP server using MediaLocator class
Hi Friends,
This is Venkat. Iam currently working on a Multimedia J2EE web project. Iam working on a requirement to
show Thumbnail view for uploaded media. For this i have downloaded a standalone code from the following site.
http://www.exactfutures.com/index02.htm.
This code converts frames of a media files to jpg images which i can use them to show as Thumbnails.
The code takes file name which is present in project folder as parameter. But in my web project iam using a FTP server to store my media files.
The above code uses Java Media Framework along with another API Fobs4JMF. The media file name is passed to MediaLocator class constructor which is located in the project folder. Iam talking about a standalone application here.
But my project is a J2EE web application.
Now my problem is that, how can i refer a file which is located on a external FTP server and pass it to MediaLocator or some other class.
Say the ftp file URL is mms://wm.testuser.net/12365741/testvideo.wmv
Guys hope you are clear abt my problem. Please help me ASAP.
Below is the part of code
* Constructor
public vid2jpg(String path) {
MediaLocator ml;
String args = path;
if ((ml = new MediaLocator(args)) == null) {
System.out.println("Cannot build media locator from: " + args);
if (!open(ml)) {
System.out.println("Failed to open media source");
* Given a MediaLocator, create a processor and start
private boolean open(MediaLocator ml) {
System.out.println("Create processor for: " + ml);
try {
p = Manager.createProcessor(ml);
} catch (Exception e) {
System.out.println("Failed to create a processor from the given media source: " + e);
return false;
p.addControllerListener(this);
// Put the Processor into configured state.
p.configure();
if (!waitForState(p.Configured)) {
System.out.println("Failed to configure the processor.");
return false;
// Get the raw output from the Processor.
p.setContentDescriptor(new ContentDescriptor(ContentDescriptor.RAW));
Thanks in Advance for your time.
Venkat
Edited by: VenkataGuru on Jul 23, 2008 5:30 PMHi Mani,
Below is code that ran successfully on a cRIO-9002. It looks much the same as yours, please double-check the formatting of your string controls. If things still do not work, let's look at the cRIO more closely.
Message Edited by Pie56694 on 06-30-2008 09:45 AM
Attachments:
FTPDELE3.jpg 28 KB
FTPDELE.jpg 24 KB
FTPDELE2.jpg 18 KB -
I can't publish to an ftp server. can you help?
G'day everyone,
I've made a lovely iWeb site, but am having problems getting it online. I click publish and iWeb is busy for about 2 - 3 hours, eventually ending with this "PUBLISH ERROR" message:
"There was an error communicating with the FTP server. Try again later, or check with your service provider." I've tried both suggestions, several times.
According to my web host co. I've entered the correct server address, user name, password, path, protocol and port. They also wrote to me "in the files uploaded I dont see any "html" files? I believe you have either not saved your website in the correct format or have failed to upload some content. Please also note that you should (from what I can see) only be uploading files in the jazzpiano.com.au" folder on your MAC to the public_html dir. Not uploading the dir jazzpiano.com.au" itself."
you can see what I have uploaded at http://www.jazzpiano.com.au/jazzpiano.com.au/
Any advice on how I can get iweb to publish to ftp properly would be most appreciated. It publishes fine to my local folder.What your hosting service is telling you is correct. You have uploaded the folder - jazzpiano.com.au - and not the files inside it. This is a limitation of the iWeb FTP and why you should follow Ethmoid's suggestion of publishing to a local folder and uploading the contents of the folder produced by iWeb using an FTP application like Cyberduck.
The movies appear to be uploaded to the server....
http://www.jazzpiano.com.au/jazzpiano.com.au/Media/clip-2010-05-30%2022%3b19%3b1 6.mov
http://www.jazzpiano.com.au/jazzpiano.com.au/Media/clip-2010-05-30%2022%3b27%3b1 2.mov
.... but may not be loading in the browser due to spaces and special characters in the filename. Simplify this - 30%2022%3b27%3b12, load them into iWeb again and republish. -
Can not connect to Cerberus FTP Server with PASV
I setup a FTP Server and i can connect from the inside fine but from the outside i can not connect in passive mode. I can in regular ftp or ssh.
Here is the log from filezilla
Status: Resolving address of domain.com
Status: Connecting to ExternalIP:990...
Status: Connection established, initializing TLS...
Status: Verifying certificate...
Status: TLS/SSL connection established, waiting for welcome message...
Response: 220-220-Welcome to Cerberus FTP Server
Response: 220 220 Created by Cerberus, LLC
Command: USER test
Response: 331 User test, password please
Command: PASS ***********
Response: 230 Password Ok, User logged in
Command: CLNT FileZilla
Response: 200 Command okay
Command: OPTS UTF8 ON
Response: 220 UTF8 support on
Command: PBSZ 0
Response: 200 PBSZ=0
Command: PROT P
Response: 200 PROT P OK, data channel will be secured
Status: Connected
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/" is the current directory
Command: TYPE I
Response: 200 Type Binary
Command: PASV
Response: 227 Entering Passive Mode (external IP,195,83)
Command: MLSD
Error: Connection timed out
Error: Failed to retrieve directory listing
Result of the command: "show running-config"
: Saved
ASA Version 8.0(4)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.10.10 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group att
ip address pppoe setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service FTP_PASV_Ports tcp
description Passive Ports
port-object range 35000 35999
object-group service FTPS tcp
description FTPS
port-object eq 990
access-list outside_access_in extended permit tcp any any object-group RDP
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any any eq ftp
access-list outside_access_in extended permit tcp any any eq telnet
access-list outside_access_in extended permit tcp any any eq smtp
access-list outside_access_in extended permit tcp any any eq www
access-list outside_access_in extended permit tcp any any eq pop3
access-list outside_access_in extended permit tcp any any eq https
access-list outside_access_in remark passive FTP port range
access-list outside_access_in extended permit tcp any host server object-group FTP_PASV_Ports
access-list outside_access_in extended permit tcp any any eq ssh
access-list outside_access_in extended permit tcp any any object-group FTPS
access-list outside_access_in extended permit tcp any any eq ftp-data
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1492
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface www server www netmask 255.255.255.255
static (inside,outside) tcp interface https server https netmask 255.255.255.255
static (inside,outside) tcp interface smtp server smtp netmask 255.255.255.255
static (inside,outside) tcp interface 3389 server 3389 netmask 255.255.255.255
static (inside,outside) tcp interface pop3 server pop3 netmask 255.255.255.255
static (inside,outside) tcp interface ftp server ftp netmask 255.255.255.255
static (inside,outside) tcp interface ssh server ssh netmask 255.255.255.255
static (inside,outside) tcp interface 990 server 990 netmask 255.255.255.255
static (inside,outside) tcp interface ftp-data server ftp-data netmask 255.255.255.255
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 192.168.10.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
vpdn group att request dialout pppoe
vpdn group att localname @static.sbcglobal.net
vpdn group att ppp authentication pap
vpdn username @static.sbcglobal.net password *********
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password rcuFiQnIXLd encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:ecb5356a2f5e680b
: end
I am programing the router with ASDM so if you could tell me what i need to do from the GUI to fix this.Dan,
Looking at the output,
Status: Resolving address of domain.com
Status: Connecting to ExternalIP:990...
Status: Connection established, initializing TLS...
Status: Verifying certificate...
Status: TLS/SSL connection established, waiting for welcome message...
This looks like FTPS which is not supported on the ASA. You can workaround it by trying to connect using Active mode from the outside instead of PSV.
You can find more info here:
https://supportforums.cisco.com/docs/DOC-23206
Mike
Maybe you are looking for
-
I can't open NEF files of my Nikon D800 in PS CS 5.1 even though I have installed Camera Raw 6.7
I can't open NEF files of my Nikon D800 in PS CS 5.1 even though I have installed Camera Raw 6.7. What's the problem? Any solutions? Thx!
-
Moving programs and folders to trash, yet still still there
I'm semi-frustrated novice macbook user. My system has being doing a few weird things lately, like alerting me to mail, to then see no new mail in my box, (though it was on the .mac server) it was very slow. It would freeze. I did the few things I kn
-
Regarding the cumulative key figure
Hi gurus, We re struck with cumulative keyfigure,we need to sum the amount based on the periods.I will write the sample data how we have to get. For Balance Sheet we would like to store cumulative amount and not the movements. This is the data actual
-
Post invoice in SAP - Simulate functionality?
Hi All, I am developing an interface to post/park invoices in my ECC systems. The Electronic invoices comes from PI so I have the options of using both IDOCs and BAPIs.... The requirement I have is something like this - The incoming invoice have to b
-
HT4859 Purchased more storage for ipod touch but not working
I have purchased a tv episode and my ipod touch is saying not enough storage. So I purchased more storage for $20, but apparently this is for cloud storage and not for other purchases? How can I get my $20 storage purchase over to my ipod touch so