Wu-ftpd installable for solaris 10 and solaris 9

Hi,
I could see only "proftpd" is available http://www.sun.com/software/solaris/freeware
But I am looking for the "wu-ftpd" server which is compatable with Solaris 9 and Solaris 10.
Any one help me from where I can get the "wu-ftpd" installable for solaris 9 and solaris 10 sparc server.
thanks,
Amudha

Hi Robert,
Thanks for your reply.
I too saw that the ftp version used in solaris 10 by default is wu-ftpd, but I am not sure about it, because when I tried to ftp to my solaris box the version it is started is not "FTP server (Version wu-2.6.2(5)".
I have got the wu-ftpd installable. But I could not get the proper document for configuring the same.
Question1: How to stop existing ftp service and start newly instlaled wu-ftpd in Solaris 9 and Solaris 10 servers?
Earlier solaris 8 version I change the ftpd version in /etc/inetd.conf file and give HUP signal to inetd then this new wu-ftpd version will be used.
Question 2: It always starts the system inbuilt ftp server and also I am getting ftp log in failure for any user which I add newly or even existing users.
could any one help to resolve these issues? Thanks in advance for your help.
Amdudha

Similar Messages

Installation with Oracle and Solaris 9

Hi Everyone,
I'm trying to install EP 6.0 sp8 with WAS 6.40 (java) on a Oracle 9.2.0.4 DB and Solaris 9 OS.
I have installed this EP version with SQL/Win without problems, but now I have several errors.
Somebody has installed this successfully ?   Any clue would be helpful.
I have 2 errors by the moment:
1) ERROR at line 1:
   ORA-00988: missing or invalid password(s)
   ORA-06512: at line 17
2) Some problem related with network adapters (My server has 4 network adapters)
thanks a lot for your help !
Regards from Mexico,
Diego Hernández

Hi Diego,
you should edit the /etc/hosts file.
Change the frontend ip adress to the servername and delete other entries for this ip adress(eg XXX-b,XXXX-c).
Start a new installation(even Database)->then you won't get different profile Startup Scripts.
Regards,
Toni

Detect memory leak in JNI so files for linux and Solaris

I have to find the memory leaks in the JNI for solaris and linux but the issue is
i need to find the leaks in the so files.I have solved the issues of leaks using Purify
on windows but not getting appropriate support for linux. Any pointers to tools will help.I tried Valgrind on linux but it is not giving me the exact location of leak as in purify and also the support for purify is for 32 bit only.Valgrind is not showing any functions in .so files.JNI is not supported in Purify for Solaris? Please Help.

amol28 wrote:
I have to find the memory leaks in the JNI for solaris and linux but the issue is
i need to find the leaks in the so files.I have solved the issues of leaks using Purify
on windows but not getting appropriate support for linux. Any pointers to tools will help.I tried Valgrind on linux but it is not giving me the exact location of leak as in purify and also the support for purify is for 32 bit only.Valgrind is not showing any functions in .so files.JNI is not supported in Purify for Solaris? Please Help.If you have written the JNI, the JNI itself (java calls, methods, etc) to be OS agnostic then it shouldn't matter. In that case you check the windows code (not jni), the linux code (not jni) and the jni code itself independent of each other.
If you haven't made the JNI OS agnostic the question would be why not?

Adobe Reader 8.1.1 for Linux and Solaris released

Linux
* 32-bit Intel Pentium processor or equivalent
* Red Hat Linux WS 5, SUSE Linux Enterprise Desktop (SLED) 10 and Ubuntu 6.10. For a list of customer-reported working systems see here
* GNOME or KDE desktop environment
* 512 MB of RAM (1 GB recommended)
* Up to 125 MB of available hard-disk space
* GTK+ (GIMP Toolkit) user interface library, version 2.6 or higher
* Firefox 1.5 or higher; Mozilla 1.73 or higher
Solaris
* UltraSPARC or UltraSPARC IIIi processor
* Solaris 9 or 10
* GNOME or KDE desktop environment (GNOME only for Solaris 10)
* 512 MB of RAM (1 GB recommended)
* Up to 175 MB of available hard-disk space
* Firefox 1.5 or higher; Mozilla 1.73 or higher

Here is the list of changes and bugs I found in AR8.1.1 and ways to fix them (bugs of course :-) ):
(this is how I fixed these bugs, you may find better ways to fix them)
The most important fix since AR 7.0.9 is that now AR8 works with new Linux
distributions which use recent GTK 2.0 libraries. It is known fact that when
recent GTK 2.0 library was present loading of AR 7.0.9 failed with endless
loop of messages: "expr: syntax error" on console window and serious CPU
usage hit silently slowing down computer reactions. Now this is fixed.
New feature added: Now AR8 scans font pathes inside X config files and adds
found fonts to its own internal font cache so system wide fonts are used for
pdf pages rendering in addition to default built-in AR8 package fonts. If
user will copy font files from Windows/fonts directory to X font locations
the pdf files outlook in AR8 is identical to the one on Windows.
When someone uses tar.bz2 or tar.gz installer it will ask for installation
directory and will show default [ /opt] directory. Do not press enter here!
If you do this a ?[3~ junk directory will be created in current directory. To
overcome this manually type /opt or other location.
Another bug is blank grey window on first run of AR8. Just close it with X and
provide path to libgtkembedmoz folder. This library is a part of mozilla web
browser so it can be found in any mozilla program directory:
/usr/lib/firefox
/usr/lib/seamonkey
/usr/lib/thunderbird
/usr/lib/mozilla
or other locations where mozilla software is installed.
Just run AR8, go to Edit->Preferences->Categories->Internet->Select Browser,
and fill in libgtkembedmoz Folder path with one of these locations or find
correct one for your system.
The last bug is AR8 only creates desktop icons on root account.
AR8 can be run without icon. Just run /usr/bin/acroread

Workshop for WebLogic and Solaris

I know there is no support for this currently. Is this something which may change down the road?
I am one of a few people in our company that would like to be able to do development on our solaris x86 boxes, but end up having to remote desktop into a development windows server in order to be able to do so.
another option/question, would it be possible to just get the weblogic plugins - assuming we have support - in order to put them into eclipse ourselves since we can get eclipse for solaris x86. It isn't that we NEED the plugins, but it does make some of the work much nicer/easier.
thanks
t-

I'm not aware of planned Solaris support, but will check on that.
The next release of Workshop for WebLogic will allow you to use an existing Eclipse rather than requiring you to use the Eclipse it installs.
-Chris

SSI error on iplanet 6.0 for linux and solaris

Hi,
I enabled ssi support in magnus and obj according to documentation.
When I hit shtml file I have this error in the logs:
parse-html reports: shtml init failed
Any idea how to fix it?
Thanks,
Gaziz

What webserver version and service pack are you using? I suspect the problem lies with Init settings. Check the Init directives in magnus.conf if its 6.0 and obj.conf if its a 4.1 server. If you still run into issues, can you show us your magnus.conf and obj.conf files.
Thanks
Manish

Post installation for Portal and errors for new system

I've recently installed a NW 7 based ABAPJAVA System with Portal Components (EPEP Core) on Windows + Oracle for demo.
1 ) Since, I am facing a lot of errors after the installation, I think I have missed to carry out some post-install steps. Can someone please suggest on the post-installation steps in some detail ??
2) When I try to open the newly installed portal using http://fqdn_host:50000/irj ; the browser shows some exception has occurred: However, I tried to restart the system (everything including db) as suggested in some of the other links and login went fine.
After I logged in to the portal (/irj) as j2ee_admin; I am trying to open Content Administration --> Portal Content OR System Administration -> Transport OR --> System Configuration etc ; but I am getting the error coded below::
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.portal.layoutPortal1_WAandNavPanel
Component Name : com.sap.portal.layouts.framework.WAandNavPanel
Error occurs during the rendering of jsp component.
Exception id: 05:05_25/03/10_0032_7012350
See the details for the exception ID in the log file
The log file (that I believe is the trace file in cluster/server0/log/defaultTrace.0.trc) says (This gives several such exceptions listed in the file.) (I'll put the log as a comment to the post because of the limit on max characters)
Note that the link http://punitp84712d:50000/nwa works absolutely fine. PFB the J2EE process details.
J2EE Process Details
Name Type PID Status Debug
Dispatcher ID7012300 J2EE Dispatcher 3,240 Running Disabled
SDM SDM Server 4,736 Running Switched off
Server0 ID7012350 J2EE Server 596 Running Disabled
Can someone please help me through this and let me know how did you draw your inference. Let me know if there is any other place that can give me more information / logs on the error.
Thanks,

Hi Jay,
Please check that server is Running but not able to open some application. I would suggest to check the Enviromental Variable for My Computer :-
- Database Enviromental variable is added or not under "user vairable for <UserID for Server Desktop>
- Check JAVA_HOME Enviromental variable is added or not under "System Variable'
Check at (My computer > Properties >> Advance >> Startup and Recovery >> Enviromental Variable >> System Variables/User varaible
Update your server IP address and host name in host file entry at (RUN > drivers > etc > host file) and check database server services (Run > Services.msc >> Start your database services manually and change prperties as automatic)
Then try to open portal URL http://<Host>:<Port>/irj/portal or http://<Host>:<Port>/index.html
Hope it helps
Regards
Arun

Which files need installation for Photoshop and Premiere Elements 9

In the list of files for download for the Photoshop and Premiere Elements 9 Plus package that I just purchased,
(Windows 7) there is a single "Premiere Content ALL" file of ~4.2GB. There are also 6 files called "Premiere
Content 1" (and 2 2nd 3), and "Premiere Content 1 HD" (and 2 and 3).
After smooth installs of the PSE and PRE programs proper, in doing the install of the "Premiere Content ALL"
file, it seems like the "Content 1-3 and 1-3 HD" files were included in it (judging by the file nmes flashing on
the screen during the install, and in poking around in the install directory).
What I would like to know is: are the 6 Content 1-3 and 1-3 HD file included in the Content ALL file, and if so,
are they at the same revision level as what's in the Content ALL file.
I don't want to just try installing the individual Content files over the ALL file install, as that might well screw
something or other up.
I tried getting an answer to this on the phone with Adobe support, but could not get an unambiguous answer
from either of the two support people I spoke to.
Any help would be appreciated.
Thanks ...
/kim

Thanks for the reply.   The real question though was/is are ALL the files contained in the 6 separate content archive files
(Content 1, Content 2, Content 3, Content HD 1, Content HD 2, and Content HD 3) also contained in the single archive
file called Content ALL?
Since I was unable to get a definitive answer to that question, I went ahead and downloaded all 7 of the Content archive
files, extracted all of the archived files in the *.7z files and compared the timestamps and sizes of the files in the 6 individual archives to the timestamps and sizes of the files from the "ALL" archive.   The files within the 6 archives matched those
in the ALL archive.
And since the sizes of all 7 *.exe files are identical, I suspect they are all the same and simply invoke an unarchiver
for their respective 7z file, using their own filename as the argument to the builtin program.
The overall result is that I have verified to my own satisfaction that the contents of the 6 individual Content XX files
*are* contained within the single Content ALL file.
It would have been NICE if Adobe had bothered to TELL their customers that, so they wouldn't spend twice the time in
downloading 6 unnecessary files which in reality just duplicate the ALL file.   Plus in my case, spending an hour or
two verifying that the contents of the 6 files were also in the ALL file.   Sheesh.
C'est la vie ...

Template Installer for BI and EP integration

Dear Friends,
I am trying to Configure my BI 7 system to EP.
and according to SAP Note - 917950 template installer is standard procedure
to configure it.
i access this tool through http://<host>:<port>/nwa.
when i run the template after entering required values in given fields.
i got error message on step one.
Element 'SAPConfigLib.IDS.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.IDS.Unclassified.createRfcDestination':Error during executing Java Reflection:JCO.Client not connected in repository call
Any help highly Appricated,
Regards,
Malik

Hi Malik,
Did you create RFC destinations properly....
here is the document...
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/6e0f41218ff023e10000000a155106/content.htm
the same problem what you are facing is.. http://sap.ittoolbox.com/groups/technical-functional/sap-basis/error-in-bi-post-install-2053496
regards,
Pradeep

JDBC installation for servlets and jsp

Hello All,
I am trying to use JDBC for my web application. i have a book but not very detailed and cannot find a good search on google.
they have said that the ODBC-JDBC bridge driver comes with jdk1.2 or forward. and ask me to set up an ODBC data source. so i went in control panel/systems tab and then try to add SQL and then when click finish it asks me how to connect to sql server, i entered my usename and password but says connection failed.
This is my worst nightmare. please help so i can start building web application using servlets and jsp.

Let me tell you right now, you have BORING nightmares.

SSL Installation for AS2 and HTTPS

Hi b2bgurus,
Please let me know the steps to install SSL for various trading partners.
Does the B2B server need a bounce after every certificate install/change.
I would like to install the certificates for AS2[EDI] and HTTPS protocals.

Does the B2B server need a bounce after every certificate install/change.B2B supports SSL via Weblogic SSL implementation and hence if you are making any change with respect to identity certificate then you may need a server bounce. If you are just adding/removing a trust certificate (partner's certificate) then no bounce is required.
I would like to install the certificates for AS2[EDI] and HTTPS protocals.Please refer below posts -
http://anuj-dwivedi.blogspot.in/2010/10/enabling-ssl-on-oracle-b2b-11g.html
http://anuj-dwivedi.blogspot.in/2011/04/implementing-message-security-in-oracle.html
Regards,
Anuj

Windows Vista and Solaris...10...install failed...help.

Hi everyone!!
i installed Solaris OS twice on my system
i have vista previously on this...
i made a partition for sol...
after installation solaris boots fine
but windows is totally corrupted and doestn boot normally
ill have to erase the whole computers HD and then reinstall it again
both the OSs are not working at the same time
with solaris already installed if i try to repair or re install windows vista its erasing solaris partition totally
please help!!! what should i do to get my system running with both OS s.
any replies.....much awaited
thank u so much in advance....
-sriya
Message was edited by:
Sriya
i have dell inspiron...just delivered yday...640m
Message was edited by:
Sriya

Install Windows first, then Solaris {not the other way round}. When Solaris installer detects Windows installation and prompts you whether to preserve Windows partition, make sure to select 'preserve' option. I believe Solaris installer creates appropriate GRUB entries for Windows and Solaris. Even if it doesn't, you can always edit the GRUB menu after the installation is complete.
Check the following web site if you need detailed instructions:
http://multiboot.solaris-x86.org/index.html

Sun Crypto 1000 and Solaris 10

hi,
I have some "Sun Crypto Accelerator 1000" cards.
Is it possible to run it on Solaris 10 w/ Web servers 6 or 7 ???
--mpech

Sun PCI 3 runs fine with Solaris 10 - running on SB2500 with PCI3. Running Win2K and RH Linux.
I cannot recall any problem with the exception that the driver files were not there for solaris 10. Resolved by the following (google news groups for SunPCI and Solaris 10).
1) install the SunPCI software
2) Create the following links with the "ln -s" command(as root) for solaris 10.
lrwxrwxrwx 1 root root 13 Mar 8 2005 sunpcidrv.2100 ->
sunpcidrv.290*
lrwxrwxrwx 1 root root 16 Mar 8 2005 sunpcidrv.2100.64
-> sunpcidrv.290.64*
The links are in /opt/SUNWspci3/drivers/solaris directory. My existing SUNPCI3 PC+Linux file systems moved over from Solaris 9 with no issues when starting up with Solaris 10.
As for upgrading to Solaris 10 from 9, 10 seems to have a bigger filesystem space requirement. I re-partioned my disks with a larger root partion and did a clean install rather than perform the upgrade.
Also note on the Solaris 10 upgrade you need to get to grips with the new SMF. A man of inetconv(1M) will get you going and there is lots of help on the news groups.
Best of Luck.
Jon.

IHs6 webgate installer for AIX5.3 and Redhat4

Lockbox and the kit do not have IHS6 webgate installer for AIX5.3 and Rehat4.
The 10.1.4 support matrix says that webgate is supported on IHS6 webserver on AIX5.3 and Redhat4.
It would be much appreciated if you could let me know from where I can download IHS6 webgate installer for AIX and Linux4
-Regards
Prabash

i got another error when i installed the Webgate 11g on 64bit linux platform . The OHS can not work again . The error in the log is
can not load webgate/bin/webgate.so into server wrong ELF class:ELFCLASS32 .
i don't know if WebGate 11g could support 64 bit linux platform ?
any suggestions is appreciated.

Help with installation for adobe flash player

When I try to download the flash player it states: The installer will automatically continue when these conflicting applications are closed : Internet Explorer. What should I do? Thank you.

Hi, you may want to try the manual Uninstall/Install.
Download and SAVE to your Desktop the Uninstaller:
http://kb2.adobe.com/cps/141/tn_14157.html
Download and SAVE to your Desktop the Installer for IE- use the EXE Installer
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Close all browser windows, you only want to be looking at your Desktop.
Disable any messenger services, as yahoo, msn, etc in the system tray(area near the clock)
Be sure to use the Administrator Account.
Disable your Anti-Virus until Flash Player is Installed correctly
Run the Uninstaller and when finished, Reboot(restart) your computer.
Now check and make sure the Anti-Virus is still Disabled before running the Installer
Run the Installer for IE, and when finished, Reboot.
Then go to this test site and test each browser:
http://www.adobe.com/software/flash/about/
You should be able to see the Flash Player logo animate(spin) and the latest version displayed.
You may want to print these instructions to make it easier to follow. If you have any questions, let me know.
Thanks,
eidnolb

Wu-ftpd installable for solaris 10 and solaris 9

Similar Messages

Maybe you are looking for