WUSB54G does not see WRT110 wireless router
I'm trying to connect our desktop to our wireless network using a WUSB54G wireless g usb network adapter,but when i select view wireless networks,it doesn't see out network.Is this adapter not compatiable with the WRT110?I installed the latest version firmware,but that didn't do anything.Any help is greatly appreciated.
Un-install the adapter software/utility from all programs...Start>>All Programs>>Linksys Wireless-G USB Adapter>>Uninstall...
Re-install the adapter using the link here
Similar Messages
-
HT4628 My MacBook Air does not see my wireless network
My iPhone and iPad Mini see the network and connect with no problem. However the MacBook Air doesn't see the network. I tried adding it manually and it still does not recognize the network. Any ideas what I can do to resolve this issue?
I am having the same problem and it is still not coming up supposed to be plug and play and Mac friendly?
Slim Portable USB 2.0 External CD-RW/DVD Combo Drive -
Galaxy Tab does not see HP wireless printer
My Galaxy Tab and HP D110a are both clients in my wireless network, however, when I try to print an email my Galaxy Tab does not recognize the HP printer. Please advise. Thanks in advance.
Hi,
1) Are you sending an email to the printer from Galaxy tab?
2) If yes, What is the exact message you receive?
3) IS the WebServices enabled on the printer so that it acquires email ID from ePrint sever?
4) Are you able to print from computer when you send an email to printer ID?
5) Is the printer email ID added to your account in ePrint Center Website?
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution" -
Macbook does not see wireless printer
My laserjet 1102w is connected to an airport extreme and I can print wirelessly from a windows 7 pc.
However, my Macbook Pro does not see the wireless printer. I can print though if I connect the printer directly via USB.
When trying to add a printer via the '+'button in Finder > Printer & Fax there is no response and nothing to connect to.
Anyone knows how to resolve this ?Hi,
Be sure to enable Wireless Direct as listed within Steps one below, as well locate the display name as listed:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03351623&cc=us&dlc=en&lc=en &product=5169041&tmp_track_link=ot_search#N96
Once you are done click the WiFi icon on your Mac and select Join Other Network.
Click on Show Networks and the Wireless Direct network should be listed there.
Shlomi -
IBook G4 Airport Extreme does not see any SSID
Hi,
My iBook 1,2 Ghz has been working great for several years now.
I am working with Mac OS X Tiger (10.4.11) for quite some time
and it never let me down. I connect to the internet using an Airport Express
connected to a speedtouch router.
The Airport Express Card in my iBook always found 6 or 7 SSID's of other
Wireless Networks in my neighbourhood and it used to login automatically on
my Airport Express wireless wetwork station.
Last week it suddenly stopped working correctly.
After starting OS X on my laptop the little Airport icon in the upper bar faded out grey.
When I click it it says it can't find any networks.
I checked all my settings, downgraded my Airport Extensions
and even installed a spare (refurbished) Airport Extreme Card.
Even with another Airport Extreme Card it does not see any wireless networks.
My other macs, a unibody MacBook Pro and white MacBook work fine with the Airport Express.
What could be wrong? Am I overlooking something here? Can somebody help me out?
How can i get my Airport Express/iBook G4 connected to my wireless network again?Hi Elko,
Thanks for the reply.
I re-installed the original Airport Extreme card into the slot again.
But now i pushed it harder than the first time. (just like you said)
I noticed the second click, but that doesn't seem to be the problem.
Both Airport Cards (the original and the new) were installed correctly.
I also checked the antenna connection but that is seated o.k. too.
After re-installing the card, i booted into Mac OS X Tiger and checked the ASP.
It says a Airport Extreme Card is installed with firmware version 405.1 (3.90.34.0.p.18)
and the langauge version is international/worldwide. So far, so good.
Nevertheless the airport card does still not find any wireless networks or SSID's after
scanning multiple times. (Location on automatic)
I am planning an upgrade to Leopard today. Maybe that's gonna help, since there were some Airport Extreme updates in Leopard. If that's not the solution, I will stay with your other suggestion and buy me a nice USB dongle.
Do you have any idea what type of dongles work best with Leopard? I have seen some different models, but a lot of dongles require third-party software to make it work and are not automatically recognized by OS X. -
My HP Officejet Pro 8600 Plus printer will not recognize my wireless router passwrd
My printer was working fine but when I turned it on today it wouldn't connect to my wireless router. I try inputing the correct password and the printer gives me this message......"the WPA security passphrase configured on your HP printer does not match your wireless router setting" .
I have entered the password several times and I know what I have entered is correctHi @Southglen,
Welcome to the HP Forums!
I noticed that your HP Officejet Pro 8600 Plus printer will not recognize your wireless router password. I am sorry to hear this, but happy to help!
I would recommend to go through this guide, How to Find the WEP or WPA Key or Password for Your Wireless Network, just to double-check your wireless password, in case it might have changed.
I would also suggest a hard reset, by going to this post How to perform a Hard Reset, by @Rich1.
After those two steps, I would suggest a firmware update, Getting Printer Updates for HP Officejet Pro 8600 (N911), Officejet 6600 (H711) and Officejet 6700 P....
Let's start with these steps, and we will go from there!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Laptop does not see wireless j4680 printer
I have an HP Officejet J4680 printer connected wirelessly to my HP desktop (Windows Vista os). I am attempting to print from my lenovo t500 laptop (Windows XP os) which is using the same wireless network as the desktop. I have set the printer as shared on the desktop and am trying to install the printer on the laptop but am not able to. When I use the 'Ass a Printer' Wizard I have tried both the Network and the local printer options. It does not see the printer at all. Any suggestions? The laptop is for work and I log on to business via VPN - do not know if thisis a factor.
Thanks in advance for any guidance
JaneI am confused. You say that the printer is connected wirelessly to an HP desktop. Is this through a router? What kind?
While connected via VPN no other network devices can be accessed (like a networked printer) nor can any other device access the computer on a VPN.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
I am trying to connect a wireless keyboard with a numeric pad to my (recent) iMac running Mountain Lion. I followed all recommendations in article http://support.apple.com/kb/TS3048#1. My computer recognises the alpha part, but it does not see the numeric pad. Any advice?
Hello:
I would try resetting the PRAM and SMC.
Barry -
I told my wireless network to forget two airport expresses 1 1st gen, 1 2nd gen so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. The network does recognize a totally new 2nd gen express. Does "forget" mean forever? How to reset?
The network does recognize a totally new 2nd gen express.
Then, it sounds like you have already reset the 2nd Gen Express, and now you need to set it up again, like you did the first time. Only, this time, assign the device name that you want to the AirPort Express.
Do NOT use the name that Apple suggests.....which will be something goofy like........Sueswimsf's Red Apple AirPort Express
Assign a simple name.....something like 2ndGenExpress -
Linksys WRT110 Wireless Router
I need to setup my Linksys WRT110 wireless router for wireless use as well as a router between my cable modem and my desktop PC. So far, I cannot find any documentation on how this is done or if it is possible at all. When I called Linksys support they told me it can be done and provided me with a link to the instructions, however, they did not work. Does anyone know if this is possible? I need to setup in order to work from home and I cannot use a wireless connection to my cable modem but I need a router between my desktop PC and my cable modem. Oh, by the way, I have a new HP desktop which is running Windows 7. I would appreciate any help someone can lend me. Thank you. SHH
From what i read on your post looks like your trying to use your wrt110 as a wireless access point and you want to still use your router near your modem.
To do this what you have to do is disable your wrt110 as a dhcp server since your other router near your is acting as the dhcp server.
So what you do is hook a cable to your wrt110 in port 1. type in 192.168.1.1 in the address bar of your internet explorer.For now this 192.168.1.1 number will get you into the wrt110 until you change it to 192.168.1.5 under setup you will see 2 areas. Under the ip address type in 192.168.1.5 so this make your wrt110 have this ip address.
Below that you will see DHCP server setting disable this. So your wrt110 will not act as the dhcp server it will act as a wireless access point.
Now if you type 192.168.1.1 in your web brower that will open the configuration screen of the router next to your modem. Which that dchp server setting will be enabled.
So basically from your modem your first router will route the signal from the modem thru the router to the computers hooked to it. then say you run a cable from that router to the wrt110.So basically your just uplinking to the wrt110. only thing is your wrt110 will have to act as a access point instead of a router.
Your main router configuration screen to get into it. you would type 192.168.1.1 in your brower after you setup your wrt110 an disable the dhcp server and set the ip to 192.168.1.5 when you type this number the 105 number in your browser it will go into the web config screen of the wrt110
So to access the web config screens of both routers they will have different numbers.
1st router by your modem will be 192.168.1.1
2nd wirless one will be 192.168.1.5 which you changed when you when in and disable it as a dhcp server since your 1st router by your modem acts as the dhcp server.
Hopefully this will help. I know it does get a little confusing been there and done that more then once. If not call linksys on the phone tell them what products you have and how you want it to work they will walk you thru it.
My setup in my home from my modem it connects to a 4 port router, then from there to a 24 port switch then uplinks with a Power over Ethernet adapter which sends power thru this little adapter over the brown pair in the cable so you dont need a electrical outlet where you put your wireless access point/router. Then from my switch it uplinks with that POE to a Wrt110 upstairs in my home. I know what a pain this can be i've call them more then once to get mine setup and working.
GOOD LUCK HOPE THIS HELPS -
New computer does not see others on network
I have a home office network with 3 computers on a WRT110. One laptop is connected wirelessly. When installing a new laptop (which will replace one w/ a bad video) it connects immediately (when using hard wire connection) thru the router to the internet but does not see the other computers nor do they see it. I don't see any option to make a connection disk in the WRT110 manual or software.
Message Edited by JANATION on 01-12-2010 06:05 PMMake sure File and Printer Sharing is Enabled...Also make sure both the computer's are in the same workgroup...
The default workgroup name in Windows Vista has been changed to WORKGROUP. In WindowsXP, the default workgroup name is MSHOME...
Also go into the computer software firewall on each computer, and set it to "trust" the other computers on your network.
If your firewall or PC security program keeps a list of trusted applications (also known as a "trusted zone"), then make sure that your router is in the trusted zone on your firewall... -
My computer does not see my printer
Hi: I am having a problem with my HP Photosmart 4500 printer. My computer does not see it. I have a USB connected to it, have uninstalled and installed the software two time, dowloaded the latest update and nothing. Add to that, I can not connect it by WIFI. WIFI on the printer is on but again, it's no where on any of the screens. The only variable I can think of that has changed has been the router I got recently from AT&T. Everything else works with the WIFI but no computer. I'm running 10.7.5. I have read the install instructions and nothing seems to be working. The one thing I do get from the HP install disc is a message reading the printer isn't recognized but there are no updates in support. OK, what am I missing here?
Try these steps to uninstall the current software using the HP scrubber and then reinstall using the current HP driver available through Apple.
To do so, perform the following steps:
1. Go to Applications/Hewlett Packard/ and then click on “HP Uninstaller”
2. Next click “Continue”
3. Highlight the device on the left pane.
4. Press and hold control+alt+command on the keyboard simultaneously while you click on “Uninstall”.
5. After you do this, you will see a pop up that asks you if you want to uninstall all HP software. Please note, that in doing this, it will remove any other HP printers that you also have installed.
6. Click “continue” and wait for the program to finish.
7. After it completes, reboot your computer.
Once the computer is back on, do the following steps:
WARNING: This is will delete all of your printers.
1. Go into “System Preferences” and then select either “Print & Scan” or "Print & Fax".
2. Right click (or control + click) on the rectangle listing your printers and then select “Reset Printing System”.
After you have reset the printing system, let's make sure you have the most recent HP driver package installed.
You can do this two ways. First, check for any available HP Update's by clicking the Apple icon and then Software Update. If there are any updates available, they should show up here. However, if the printer is connected by USB, it will not show any available updates. The other option is downloading the drivers from Apple's website.
You can download it here: http://support.apple.com/downloads/DL907/en_US/HPPrinterDrivers2.14.dmg
Once you have downloaded the driver package and completed the installation, you will want to plug your printer back in (if you were using a USB connection). After the printer is plugged back in, go into your print settings under System Preferences > Print & Scan. To add the printer, click the plus sign. You should see your printer listed here. If not, click "Add Printer or Scanner." Click the name of your printer and then click "Use:” box. Make sure that says the name of your printer and not AirPrint. If you are using the printer wirelessly, make sure that the printer "Kind:" is set to Bonjour or Bonjour Multifunction. Click "Add" down in the bottom right hand corner.
This will add your printer back using the most recent HP print driver available through Apple. Let me know if this helps resolve your issue or not. If it doesn't, let me know I will see what else I can do.
Best of luck,
Kyle -
Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.
Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem! -
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
a. wired?
b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thankssgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
a. wired?
b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for. -
MacBook Does Not See HP Photosmart C4480 Connected to Airport Express
I have an AT&T 2wire wireless & router as my internet access. Today I turned off the 2wire wireless and was able to set up an Apple-based home network with an Airport Extreme Base Station and Airport Express which I configured to extend the AEBS network. Both the AEBS and Airport Express show "green" for setup.
iTunes sees the Airport Express.
The Airport Express sees a HP Photosmart C4480 printer I have connected to it via the USB port.
- I do not have the C4480 driver installed on the MacBook.
PROBLEM: The Macbook sees the AEBS and Airport Express but DOES NOT see the HP printer connected to the Airport Express. When I go to System Preferences > Printer > Add Printer it does not see the HP and I don't know the IP address to add it. What can anyone recommend?
Thank youApple Tech Support solved this problem quickly and easily. In short, the USB connected printer was pointed to the computer and not the Airport Express. Here's what they ran me through:
- Assumes the Airport Express sees the printer as connected via USB
1. Open System Preferences > Print & Fax
2. Regardless of the printers you see, click the "+" button to add a printer
3. Select the Default icon
4. Check the Kind... should be Bonjour
5. Select the printer type connected to the Airport Express... the system will start to add such a printer
6. Ensure the Location is the Airport Express (mine was previously pointed to the MacBook)
-- You can change the name here is you like also such as "Kitchen HP Photosmart c4480)... recommend a different name than the original one installed so you know which one to remove later
7. Select Add
8. Remove the original printer which is pointing to the MacBook
You should be good to go.... Key points: Bonjour and Location as the Airport Express
Maybe you are looking for
-
"View All RSS Articles" Sometimes Stops All Pages from Loading
Hi! I'd like some help with this: Sometimes, when I view a whole lot of RSS articles in one tab, the content stops loading after one hundred or so articles have come in. After this, no pages will load -- not even a local html file in my home director
-
How can I have a Pages document that is shared with me under my Pages section and not open it with the link?
-
Unable to run setup.exe after downloading oracle9i Personal edition
So that we may better diagnose DOWNLOAD problems, please provide the following information. - Server name - Filename - Date/Time - Browser + Version IE 5.0 - O/S + Version W2K Professional /SP 2 - Error Msg None
-
I use my reminders all the time. I had 18 for today and now there are only 6--ones I had added previously that are overdue. There are no future reminders. I did not touch anything! And nothing I seem to do will get them back...
-
Hi, Does someone know something about following questions: 1. Has SAP scheduled a date on which SAP CRM 5.0 SP09 will be released? 2. Will Visual Studio 2005 be supported as of SP09 or will it still be VS 2003? 3. Will SP09 be a "service release" or