WVC200 and bad audio on monitor software

I am using 9 WVC200 cameras with the "monitor" software. when view any camera from a browser, the audio works fine. When viewing any of the cameras through the "monitor" software (2.0.0.14) the audio has an echo sound and never works properly. What is the issue??

THanks for the info. I had been using over 9 cameras so the standard software which supports 9 was not enough and i found another linksys monitor software that worked for more cameras. in trying the software you reccomended the audio works perfectly so it must have been a compatibility issue with the other linksys monitor which i have sinced stopped using.
Thanks for the help.

Similar Messages

WVC200 Audio issues when used with Monitor software

I use a number of WVC cameras and when I view them through a browser, the audio works fine. When I use the Linksys "monitor" software, i have a continuous echo/noise problem. Is there a fix to this or am i limited to watching them one at a time through a browser??
Solved!
Go to Solution.

Hi.
These products are being handled by the Cisco Small Business Support Community.
*If my post answers your question, please mark it as "Accepted Solution".
*Don't forget to give "Kudos". Thanks!

Cisco camera and SB monitoring software compatibility

Hi all,
We are currently looking into Dome Day/Night Outdoor security cameras and the small business ones may not fit our needs. I have done some research and found CIVS-IPC-2630V.
Would this camera be compatible with the small business monitoring software SWVMS16?
Thank you.

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center.
Unfortunately none of the Enterprise Camera's are compatible with the Small Business Video Monitoring Software.
If using the Basic version, only Cisco Small Business Cameras are recognized. (WVC210, WVC/PVC2300, PVC300, VC220 and VC240) There are some new cameras in development, but there is no timeframe for availability yet.
If you have any other questions, please let us know.
Eric Moyers
Cisco Network Support Engineer
CCNA, CCNA-Wireless
1-866-606-1866

Camera control and Monitor Software

Hi All,
Two questions, quasi-related.
First, does anyone know of any camera control software for Sony? I have a TR27 and an HDR FX1.
Second, does anyone have any experience with monitoring software? Specifically, I am looking at the Red Lightning DV Monitor software. It would be nice to go from the camera directly to the hard drive. Also, is there any software which lets you monitor more than one camera simultaneously?
Thanks. Any input/links would be helpful and appreciated.
--Dana

They should produce the same EXACT version of the RAW file.
The profiles are meant to give approximately the same rendering concerning tone and color. You cannot render the exact same thing as Canon uses proprietary algorithms which Lightroom cannot use. The profiles just approximate those using Lightroom's RAW engine. Also they will only come close if you use default settings in your camera, so no highlight priority, no added saturation, etc. If you want the exact same thing, shoot jpeg or convert the RAW to tiff in DPP. That said, my experience is that the camera matching profiles come very close to out-of-camera rendering as long as you don't modify the styles.
I say they HAVE to, because otherwise who is right - who´s got the true colors (e.g. Faithful style is supposed to represent colors exactly if shot at 5200K, yet DPP Faithful differs from LR faithful????)
None of Canon's styles give accurate rendering. That is not what they are meant to do. They are meant to be visually attractive, which is very different from accurate. Faithful is not really scene referred correct color. See for some measurements of that on one of the more accurate cameras, the Canon 5D mk II, here. The way to get correct color, if that is what you are interested in, is to shoot a colorchecker chart and use Adobe's free DNG profile editor to generate a calibrated profile for your camera.
Also, is there a way to convert other picture styles one has created into Lightroom profiles perhaps through some use of DNG Profile Editor?
No. Would be neat, but is not currently possible without a lot of manual labor. You can shoot a colorchecker and by comparing the rendering in DNG profile editor to that in DPP visually and using the patch tools, you might be able to sort of get there but that is going to be very tedious. It would be nice if we were able to give DNG Profile Editor a different target than perfect rendering of the colorchecker, because right now, the only way to do it is visual.

Temperature Monitor software and Snow Leopard

On my Mac Pro Core Temperatures are not displayed with Snow Leopard as they are under Leopard. Do I have a problem or do others notice this?

Berkley,
I'd try reinstalling whatever software you're running, I assume Temperature Monitor from Marcel Bresink. It's possible there's a SL update you didn't get yet. Also try Using his Hardware monitor in demo mode. I'm seeing my core temps clearly under Snow Leopard.
Also, sometimes quitting and restarting the monitor software helps. Several times if necessary. Temperature Monitor has some menu items that are helpful if readings don't display, like Rescan Sensor Configuration and Update All Readings Now. Try those.
Hope that helps,
Rob

FCP 7 and Matrox MX02 mini has bad audio playback

This problem has been frustrating me for months.
I have FCP setup to output video and audio via my marox MX02 mini. The mini is hooked up to HDMI and component, and RCA audio.
When playing back on the timeline in FCP the audio stutters, echos and drops out.
I've been bugging them at the Matrox forum, and each new update that comes out claims to fix the problem, and it gets a little better, but honestly it is still nowhere near satisfactory.
It's worst when stepping 1 frame at a time or scrubbing thru footage.
Does anyone else experience this problem? Am I doing something wrong?

What drivers are you running? What footage type are you working with? Format, frame rate...
Thanks,
Shane

How do I get the audio playback from the source monitor to work? I have the trial version of the latest premiere and the audio works in that but not cs6

I have the trial version of the latest premiere and the audio works in that but not cs6

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
-especially your sound hardware, and the details of your video

HP Pavilion dv9218tx Notebook PC and HDMI audio problem with Sony TV and Windows 7

Sound does not come through with the HDMI connection and, on investigation, there is no HDMI audio driver/option.
Noting that there seemed to be an issue with windows 7 and HDMI audio which is addressed by updating the BIOS and the connexant sound driver I have done so to no effect.
The Sony TV is recognised as a standard monitor in the devices for graphics but not for audio
Suggestions as to why HDMI does not appear - including as a disabled service - and what to do t get is available?

Hello everyone,
Thanks for posting on the HP Forums!
I will definitely assist you with lack of sound issues. Before anything else is done, please make sure you try every step in this thread: Troubleshooting Guide: Audio does not Work after a Certain Period of Time
If every step does not help, please provide the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
5. What steps have been attempted from my first post on this thread, and what were the results?
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Either way, let me know what happens. Thanks!
Mario
I worked on behalf of HP.

I downloaded mountain lion and my audio does not work

I Downloaded mountain lion and my audio input does not work. I am tryig to use it with Articulate.
I rebooted twice, I ahve taken out the external mic
I have looked in Utilities and see if the setting are muted but all ok
I have looked in Activity monitor
Please help
Brett

Take each of the following steps that you haven't already tried.
1. If anything is plugged into the audio-out (headphone) port, unplug it.
2. From the menu bar, select
 ▹ System Preferences ▹ Sound ▹ Output
Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
3. You may need to darken the room for this step. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
5. Reset the NVRAM.
6. Reset the SMC.
7. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.

Low and bad screen resolution with radeonhd [SOLVED]

Hi Archers,
I just setted up a brand new PC with an ATI HD4550 GPU and a 22'' 1680x1050 monitor.
I can run Xorg and even Gnome using the radeonhd drivers, but the max resolution I can get is 1280x1024 (which isn't even the correct ratio).
The lower suggested resolutions' ratios are bad as well.
I didn't write an xorg.conf file.
When I try to run X with a configuration file generated by X -configure, the monitor displays an error message like "Unsupported video signal".
What can I do?
Last edited by monsieur moche (2009-10-15 13:44:01)

monsieur moche wrote:Here is the xorg.conf of my last test: (...)
As you can see, I uncommented some lines and I added Option "PreferredMode" "1680x1050" to the monitor section.
After a lot of gasping, moaning and countless tries, this xorg.conf works here, with an analogue monitor. Look at the bottom for how I set the mode choices. Good luck!
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "evdev"
Load "glx"
Load "extmod"
Load "record"
Load "dri2"
Load "dbe"
Load "dri"
Load "drm"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbOptions" "terminate:cntrl_alt_bksp"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
# Option "ZAxisMapping" "4 5 6 7" # Xorg's oppsett
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
Option "ButtonMapping" "1 2 3 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 100.0
VertRefresh 50.0 - 100.0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
Option "AccelMethod" "exa" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
Option "DRI" "on" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "RV770 [Radeon HD 4850]"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection

Question about audio in and xbox360 audio on the x-fi audio c

I am having an extremely difficult time getting my audio to go from my 360 through the card. I have updated everything and still can't get any audio. I actually had audio for a day or two and then it stopped and I have no clue why it started or stopped.
I have my 360 hooked up to my monitor through the vga adapter and the audio is plugged into an adapter that goes to a single cord that plugs into the back of the card.
I had this previous settup under windows xp on another motherboard and the audio worked fine. I installed vista on a new mb and the audio wouldn't work with onboard so I bought the card. I get the same issue with the card although it did work for a few days as I said. Then it just stopped working and I hadn't touched any audio setting directly.
I've gone through all the audio setting I can find and have tried switch things on and off under sound which lists speakers and digital audio interface under playback. The audio from winamp goes through the digital audio interface (I can see the sound bar going up and down on it.
There's another tab that says recording and includes s/pdif-in, line-in auxiliary and microphone. All of those are unavailable except for the microphone. I've tried switching to the other devices and none of them have made the 360 audio come out.
I've also checked the hardware configuration under hardware manager and the device is working fine. I'm sure it has something to do with vista because everything worked under xp before.
Anyone else have this issue before? It kind of sucks that I can't play audio from my 360 to my speakers. I'm looking at installing linux on my other partition and see if it works through there....

Yep. I have the latest audio drivers for the card for vista and it was working. I was pissed because I couldn't get the audio working, then all of a sudden it worked and I have no clue what I might have done to fix that. I was playing bioshock for a few days and then I went one day to play it again, turn on my 360, and no audio at all.
It has to be either some audio setting, a driver issue, or some sort of incompatability in the software. Vista says the device is working and I do get audio out to my speaks from the computer so it has to be an issue specifically with the settings for the I/O jack, I think.
Like I said I had the same issue with my onboard sound so I bought the card. So i'm guessing it's some sort of vista setting. I'm just wondering what to check in the vista sound menu's. I have only just started using vista so I am not completely up to date on vista. The sound menu seems far more robust in terms of devices displayed and such.

Load and Play audio file (either sound or music) from my computer using DirectSound in C++

#include "stdafx.h"
#include <dsound.h>
class AudioPlayer
private:
unsigned long long start_point,
playback_point,
break_point;
bool now_playing, loop, ignore_start_point;
int speed;
//and any data that stores an audio (can be either sound or music)
public:
void Play_or_Resume(); //Either starts playing or resumes the audio stored in private (Runs a thread that either increments or decrements the playback_point by the speed member and sets the now_playing member to true).
void Pause(); //Stops playing the audio stored in private until Play_or_Resume method is called (Just suspends the thread that was mentioned above and sets the now_playing member to false).
void Play(unsigned long long from = 0, unsigned long long length = -1, bool move_start_point_too = true);
//Plays audio from the value of the 'from' parameter along the value of the 'length' parameter and sets the now_playing member to true.
//Playback point is pushed to the value of the 'from' parameter, and break point is pushed to the result of from + length.
//If move_start_point_too parameter is true, then also start point is pushed where playback point is pushed too (to the value of the 'from' parameter).
//Also the value of the 'from' parameter is an absolute position, but otherwise (if move_start_point_too parameter is false) it ('from' parameter) is relative to start point's position until it (start point) is ignored.
//The value of the 'from' parameter never can be negative!
void MovePlaybackPoint(unsigned long long new_position); //Modifies playback point position that is stored in private to a new position that indicates to sample no. new_position.
unsigned long long GetPlaybackPointPosition(); //Returns playback point's position that has been alreadyS mentiond above.
unsigned long long GetLength(); //Returns total number of samples in the audio stored in private.
void MoveBreakPointTo(unsigned long long new_position); //Moves the break point to a new position that indicates to sample no. new position.
//If the loop member is false, then audio should always stops playing and also set the now_playing member to false, when playback point reaches the break point, even the Pause method was not called.
//Then calling again the Play_or_Resume method will bring the playback point back to start point (the default value for this member is zero 0).
//But if the loop member is true, then playback point just returns to start point immediately and continue playing from there (now_playing remains true and it's value is unchanged).
//There is a possibility to move the break point to a negative integer, so audio either stops and sets now_playing to false or replays from start point and left now_playing true according to the loop member, at the end of the audio. The default value of break point member is minus one -1 .
unsigned long long GetBreakpointPosition(); //Returns the position of the break point that has been already mentioned above.
void MoveStartPointTo(unsigned long long new_position); //Moves the start point to a new position that indicates to sample no. new position.
unsigned long long GetStartPointPosition(); //Returns the position of the start point that has been already mentioned above.
void EnableRepeatMode(); //Sets the private loop member to true.
void DisableRepeatMode(); //Sets the private loop member to false.
void ToggleRepeatMode(); //If loop was true before calling this function, so after it is false. Otherwrise it is true.
bool IsRepeating(); //Returns whether audio repeats itself (from start point to either breakpoint or end of buffer). This function just returns the value of the loop member.
void SetSpeed(int num_sam_per_sec); //Modifies the number of samples that are played in every second.
//If number (integer) is negative, then audio is played in backward.
//When playback point reaches start point, then it is transferred to break point if it's position is not negative. Otherwise it is transferred to the end of the audio buffer.
void IgnoreStartPoint(); //Sets the ignore_start_point member to true. Then all methods always relate to start point as zero (even if it's value is not zero).
void ReferStartPoint(); //Sets the ignore_start_point member to false.
bool IsStartPointIgnored(); //Returns whether start point is ignored or not. This method just returns the value of ignore_start_point member.
int GetSpeed(); //Returns the number of samples that are played in every second.
void SetNumberOfChannels(byte new_value); //Modifies number of channels.
byte GetNumberOfChannels(); //Returns number of channels.
void SetBlockAlign(byte new_value); //Sets block align.
byte GetBlockAlign(); //Returns block align.
const char* LoadAudioFromComputer(const char* path_and_name_of_file, AudioPlayer* lpAp, bool auto_start_playing = true);
//This function fills the instance pointed by 'lpAp' parameter with the data of the audio file redirected by 'path_and_name_of_file' parameter, and calls the Play_or_Resume method of this instance if auto_start_playing is true.
//If the function succeeds, then it returns "succeed". Otherwise (if the function fails) then it returns an error string that describes the problem (the reason it failed). It can be sent to output, so it can be read, by either call to MessageBox, printf, std::cout, TextOut, DrawText functions and etc.
//The function can fails, because the file was not exist, or could not be opened for reading, because it was opened by another process, or the file was either encrypted or protected, or corrupted, or was not audio file, but text, image and etc.
I want to implement all methods of the AudioPlayer class and the LoadAudioFromComputer function by myself using DirectSound (the <dsound.h>) and all functions, interfaces, methods, structures, etc... that this header provides, but I don't know how! I
need your help! This is difficult for me to find in the internet the information I need to do this. MSDN is teaching all this stuff, but this is too difficult! I need you to implement all these methods of the AudioPlayer class and the LoadAudioFromComputer
function for me using DirectSound and the <dsound.h> and the explanations I wrote in comments, and then post the code. I will copy it to mine and read it all to learn. Please use comments so I can understand. I will thank and appreciate anyone who will
donate his time to help me and do this for me! :D

Microsoft pulled the plug on DirectSound HAL in Vista due to lack of hardware support. The SAL exists for
software compatibility, good intention but bad performance as there is no longer a direct path from
DirectSound to audio drivers.
People choose DirectSound for its Direct-ness
but there is no reason to choose it now.
DirectX SDK was integrated
with WIndows SDK which ships with Visual Studio 2012 so you don't need additional downloads for
WASAPI and XAudio 2.
Just look up the documentation for headers/librarieslike every other Windows API you use. If you have a hard time to find the documentation then you need to go to search engines and find search engine tutorials.
There are plenty of samples for both WASAPI and XAudio 2, both in the Windows SDK and online. The DirectX team has some suggestions on which to use on their team blog.
You can find experts for those APIs at the Windows Desktop Pro-Audio Application Development forum and the
Audio/XACT forum on MSDN (link left out for you to practice your search skills). Again, it is fine to ask for hints but don't ask the whole
solution. You are competing with others who just need a hint to finish work here. The time spent on working on your assignment would be better spent on helping on giving hints to others.
Visual C++ MVP

Dell xps 13 2015, flat and dull audio quality from headphones

Hi!
Anyone else experiencing that the sound quality through headphones is very flat and bad? I get no bass response at all. The MAXX 3 programe does nothing that improves the actual audio frequency output. Support told me nothing is wrong with my system only that it is how it is. Electronic Music is unbearable. There is nothing wrong hardware wise with my headphone jack it is just the missing frequencies that drive me mad.

Martinr92
nor does the driver update window show anything else than the realtek driver
Here is another method of installing the Windows native audio driver.
1. Open the Device Manager (Control Panel>Device Manager) and expand the "Sound, video and game controllers" category.
2. Right click on "Realtek High Definition Audio" to open the context menu.
3. Select to uninstall.
4. Put a check in the box "delete the driver software for this device". Don't skip this step.
5. Restart the laptop. Windows will remove the current Realtek driver and its files and install the native audio driver (named "High Definition Audio Device").
Note: But If you had any older Realtek driver files on the hard drive Windows will install the older Realtek driver instead of the native driver. So go back to the Device Manager and see if there is another instance of Realtek High Definition Audio. If so, repeat the removal process and repeat as many times as necessary until there is no longer Realtek High Definition Audio in Device Manager.
After all Realtek driver files have been removed, you will see "High Definition Audio Device" in Device Manager. [To get back to the Realtek driver after using this method, you have to download a fresh copy of it from the XPS 13 9343 support page.]
If you can get the native driver installed, check for the Speaker properties Enhancements tab.

Bad Audio Under My Profile in Leopard

I have an iMac G5 running 10.5.8. I recently bought some new speakers for my computer, hooked them up and found out the sound was really bad sounding (like underwater). At first I thought it was my speakers, but I plugged in my iPhone and it sounded great.
I have another user profile on my iMac, so I went into it and ran iTunes and the sound in there is great as well. Only under my profile, that it has the bad audio. I went through and looked if any third party sound enhancement software was installed and couldn't come up with anything. Also I turned off all the Equalizer and Sound enhancer stuff in iTunes.
This isn't just related to iTunes on my profile either but everything (Safari, Garageband, Games, etc).
Is there anyway I can get it to default settings without having to reinstall system software? My superdrive crapped out on me too so I can't use the Leopard disc anymore.

RPS13 wrote:
I have an iMac G5 running 10.5.8. I recently bought some new speakers for my computer, hooked them up and found out the sound was really bad sounding (like underwater). At first I thought it was my speakers, but I plugged in my iPhone and it sounded great.
I have another user profile on my iMac, so I went into it and ran iTunes and the sound in there is great as well. Only under my profile, that it has the bad audio. I went through and looked if any third party sound enhancement software was installed and couldn't come up with anything. Also I turned off all the Equalizer and Sound enhancer stuff in iTunes.
This isn't just related to iTunes on my profile either but everything (Safari, Garageband, Games, etc).
Is there anyway I can get it to default settings without having to reinstall system software? My superdrive crapped out on me too so I can't use the Leopard disc anymore.
Welcome to Apple's discussion groups.
Since your problem is limited to one account it's probably due to something in <thathomefolder>/Library , It sounds like you may have checked the Audio folder there. The other place to check is the Preferences folder. Create a folder on your computer's Desktop to hold moved filed, then move anything that looks like it might involve your problem from the Preferences folder to the folder in the Desktop, log out and back in, the see if you still have the problem. If you do, put the moved file(s) back to the original spot.
If you don't see any files obviously related to the problem, you could then drag half the files in the Preferences folder to the folder on the Desktop, then repeat the process of logging out and back in and testing. If the problem still exists, put the moved files back, replacing any newly-created files. Then repeat with the second half of the files.
Once you've identified a group of files that affect the problem, note the first and last file in the group, move them back as well, then repeat the whole process with the new group by moving out the first half of the group, etc. With each cycle you'll be dealing with half as many files. Eventually you'll be able to identify the culprit.
It's possible that the problem lies in another folder within the Library folder. It would be a little trickier trying the approach above to items in the Library folder, but it might work. Another approach you might try is to copy folders from the Library folder of the other account to your main account. If you want to try that, I'd copy that account's entire Library folder to the "Shared" account by holding down an "option" key while you drag it. That will put that Library folder in a place where you can access it from your main account. As before, I'd save anything you're replacing until you're sure you haven't damaged anything.

Question for music producers ! MacBook Pro and my audio interface from Virus Ti doesn't seem to work properly after I updated 10.9.4 Mavericks

Hello
Few days ago I upgraded my Macbook Pro to 10.9.4 Mavericks And I’m using the sound card from the Virus Ti for all audio in/out and when I’m not producing music , I usually close my Logic and I use the Virus Ti as a sound card for listening to Soundcloud or iTunes on my Mac and the audio usually come out of my studio monitors , but right now even when everything is connected , the sounds from the web site is coming out from my Macbook speaker instead of my studio monitors ? and I already checked the “Output/Input” in preference and is already say Access Virus Ti and I already repair disc too ! ,
Right now when I’m using Logic to produced with Virus sound card everything is working fine and the audio is coming out of my monitors but as soon as I turn off Logic to use Youtube or other web site, the audio automatic switch back to laptop speakers ?
If anyone had this problems with their audio interface and OS 10.9.4 , please advise !
Your help is much appreciated : )

@michelle929 don't feel so bad, i too which i never would have upgrade to ff4, OMG, so piss., worse is they deleted the old version from my computer, how dare them..lol... but most of the thing i use now don't wanna work.. i want my 3.6.15 well i think that was the last one i had.. piss piss,,and Michelle your not whining , just stating the fact's.. give me back the old version Mozilla... can't even find it on here,, any one knows where i can find it... if not gonna have to go to a server an get it,,
thanks Lotta firefox. great job, not tell us first hand what won't work....:(

WVC200 and bad audio on monitor software

Similar Messages

Maybe you are looking for