Wvc210 camera , fast motion

I need to know how to solve the fast motion on the WVC210 camera when I running the record video on Media player

need to know how to solve the fast motion on the WVC210 camera when I running the record video on Media player

Similar Messages

  • Importing HDV into iMovie, playback turns into fast motion

    Everything was going fine..
    connecting, recognise the jvc ji hd100, importing the hdv 720p 50/25 clips,
    but then when playback, i found out the clips imported was in fast motion..
    tried most combinations i can possibly think of,
    also changing the cam settings,
    didn't work out tho.
    stil trying hard..
    anyone? many thanks!

    Before importing JVC HDV 720p you must select HDV 720p in the 'Create new project' dialogue box:
    ..otherwise it will play at double-speed!
    (..That's because the JVC version of HDV, i.e; 720p, uses single "progressive" - i.e; entire - frames, instead of two interlaced fields per frame.
    The fast playback is caused by iMovie playing two frames one after the other as if they were fields. If you choose 720p before importing, all should be well..)

  • Fast motion to 16/18 fps

    hey, i'd like to ask how do you fast motion a sequence so that it'll have a 16/18 fps "silent film like" frame rate? anybody know a tutorial in this? Thx u.

    Actually Jim, I know your considerable education in Video production will have informed you that Silent movies were hand cranked.
    Although the camera operators were very skilled at maintaining a reasonably constant crank rate... frequently they allowed their emotions and excitement to control the speed of the crank depending on the action. This became part of the silent movie look.  Of course this also affected the exposure so that becomes part of the look as well.
    Scratches and MB type aging effects are not part of the silent film framerate. That is an "aging" of the negative or print by handling / mishandling/ wear and tear.
    When I had shares in  a film laboratory and was active in its operation, one of my competitors was the film lab owned by Dir. Peter Jackson (who  at the time , made a spoof film  called "Forgotten Silver").  A discovery about some long lost footage and the story it told.  To replicate the footage in a silent film look involved considerable and skilled  "mechanical mishandling" during the process of shooting and post production to sell the idea it was real.  None of this included the easy way out of using a plug in.  It was incredibly difficult to do in a convincing manner.  He fooled so many people it was legend.

  • Fast motion effect

    I am wondering how to make fast motion effect. The idea is to make from long video appr. 40 min (it is processing of printinting on 3d printer) short video. But it should be visible how it "grow" layer by layer.I tried already normal fast forward. Looks bad. Is it even possible?  The camera was stable on one place, so now i need just to make video faster.
    I hope you understand, what I mean

    I want to show how it grow fast layer by layer, but it look like pause and after its bigger for few cm. The process is not that obvious. I want to make it like in documental movie like "how it work" or "how it was made".

  • Slow motion / fast motion in Premiere Elements 13

    I read that in Premiere Elements 13 fast motion (and I think also slow motion) ist removed. Is that correct. And if yes: Is there any workaround available?

    rr
    Thanks for the reply.
    Great information. If you have been using Ctrl+R, that is the keyboard shortcut that brings up the Time Stretch dialog.
    Time Stretch (use of the Ctrl+R) has not been removed from Premiere Elements 13 Expert workspace.
    Like Premiere Elements 11, Time Stretch is found in the Expert workspace and not in the Quick workspace.
    When you use the keyboard shortcut Ctrl+R, I get Time Stretch dialog from where I can create the slow or fast motion effect in the selected clip.
    The following relates to Premiere Elements Timelapse Capture (Stop Motion) which has been removed from
    Premiere Elements 13 as a specific feature that you see in Premiere Elements 11 and 12.
    Adobe Premiere Elements 11 * Capture stop-motion and time-lapse video
    Please let me know if you are OK with the above information.
    Thank you.
    ATR

  • Slow/fast motion?

    I am a super beginner with imovie but im getting pretty good at it and im almost done with my movie but all i have left to do is make something in slowmotion and something in fast motion. does any one know how to do that and can explain 2 me how?

    That is not possible within iMovie '08. Here is one way of doing it:
    - Select just the section of the video you want to slow down, and export it as a Quicktime movie.
    - Download and install iMovie '06 from Apple. It's a free download for iMovie '08 owners.
    - Create a new project, import the clip, add it to the timeline.
    - Find the slow motion effect, adjust the speed of your clip.
    - Export result back out.
    - Import edited clip back into iMovie '08.
    - Splice it into your iMovie '08 project.
    There will be some quality loss as you will go through some format conversions along the way.

  • Lost my Camera and motion paths

    Help! I saved and closed a project, and when I re-opened it later, i can't see my camera or motion paths. The paths tracked over several photographs, and while I can see the photos in perspective view, they do not show up in any 3D angles or camera views. The wireframe image of the camera, background and motion paths are just gone.
    Thanks in advance...

    hi,
    have you tried opening up a prject from the autosave vault. they might be in there
    adam

  • Adobe premiere cs6 - wave in fast motion

    i have to cut 1min of 30m TV broadcast
    in original ts clip (25frames), the fast motion is very smooth
    i tried to cut and export into h.264 format, the fast motion shows full of  wave
    even i tried to set
    higher bit rate
    2 passes
    possible to cut without re-rendering?
    Thanks a lot.

    i tried to open the exported video (h.264) in premiere CS6, it is OK
    But when playing original clip (ts) and exported video (h.264) by media player at the same computer, the exported video is full of wave.
    is it a problem with codec, player....? 
    how should i do to best keep the original quality?  Thanks.

  • Adding Effects like slow motion, fast motion etc...

    On the old imovie you could add animations, slow motion/fast motion, and other graphics to clips. How do you do the same with imove 08 most important the slow motion feature?

    I'm currently using iMovie 08 and I would switch to iMovie 06 but when I try to install it but the message "Please install iLife ’08 before installing iMovie HD 6" pops up. My computer went through a hard drive crash recently and when they replaced it I thought they popped in iLife '08 (hence being stuck with iMovie 08) but i dunno... suggestions?

  • Slow-Motion/Fast-Motion.

    Just wondering if there is a way to gradually slow down a clip from keyframe to keyframe, as in add a gradual slow motion from one point to another not just an immediate slow down and that being the same speed between the two points.
    Also is there a way to do this for fast-motion as opposed to slow-motion?

    If you are referring to the Time Remap filter (...thanks Ian...) you can see the result only in the canvas: make sure you +always render+ the clip after applying or changing parameters, in order to see the final quality (without rendering, you can get very unusual results... even with RT Unlimited).
    Piero

  • No longer can access the WVC210 camera configuration utility

    I am setting up the WVC210 camera, following the installation instructions I was successful in accessing the camera set up the first time(192.168.1.115), but could not get it to work on wireless.  Now I can'tget back in tothe set-up to see if the settigns match my router. (works when hardwired, but not on wireless). (I may have changed the port to 1024?).
    When I type into my browser the IP address on the face of my camera (now 192.168.1.104), I lo longer get the setup screen, can you help?

    Hi,
    The WVC210 is now being handled by the Cisco Small Business Support Community.
    You need to register an account to be able to post there.

  • Fast Motion unsmooth shots ; PLEASE HELP

    as when shots are in slow motion...fast motion creates shaky ghostiness too with the footage (i wonder how technologically incorrect that term is).
    how do i reduce/fix this eye-piercing problem when i increase speed of my footage.
    please help.
    deadline imminent.

    Denis Murphy wrote:
    If you shot this footage with the wrong shutter speed, however, there's not much you can do to make it look good in slow motion.
    If that's the case, I've found that doing motion blur on it after the fact can help...
    Patrick

  • How to best achieve slow motion and fast motion

    Hi - I am new to the forum and a basic user of Premiere Pro CS5. I am working on a project shot at 24 fps, and would like to do slow and fast motion.
    From what i understand there are 2-3 different ways to do this in Premiere - choosing speed/duration of the clip from timeline, or choosing time remapping form effects panel ot using rate stretch tool. Wondering how do these compare and which is better - any pointers for this will be great help. Also is slow motion and fast motion better done in After Effects than Premiere. Or any recommended plugins that would work on cs5 and cs5.5. Thanks.

    The main difference between using time-remapping and just using time-stretching is that time-remapping allows you to change the speed quite flexibly at different times in the same clip, whereas stretching just changes the rate for the whole clip.
    See this page:
    "Change speed and duration for one or more clips"
    > Also is slow motion and fast motion better done in After Effects than Premiere.
    After Effects has far more control, especially with regard to how new image information is created between the original frames when you change speed and require frame interpolation (frame blending). Pixel Motion and Timewarp use a very advanced motion vector method (based on the Foundry's Kronos software) for doing this.
    See "Time-stretching and time-remapping".

  • Animation video shows lines when it is fast motion

    Hi all
    I have just got my Apple Tv 2nd gen and updated it last night.
    I am starting to convert my DVD's to run on the Apple TV.
    I am using  software called DVD-Ripper which I purchased of the Mac App Store.
    Now I have converted 5 films and all are working great, but when I started to convert my futurama dvd's when there is any fast motion in the video I get lines.
    Like this:
    This is a link to the software I am using
    http://itunes.apple.com/us/app/dvd-ripper/id423292987?mt=12
    When I select my options in the settings I and selecting halfway between poor and best settings and the sound is at the highest setting.. So a dvd film on this setting comes out at just under 1.5gig. the only setting I am leaving as standard is the frame rate which is at 24.
    All DVD's are UK PAL
    Where am I going wrong?

    Discussions about circumventing copy protection are not permitted in this community. Please refer to the community Terms of Use.

  • Nforce fast motion problem

    when ever I boot up everything is in fast motion. By fast motion is minutes are seconds and hours are minutes... that's how fast the system is going, this was on the old forum so I know others have had this problem with this board. Anyone remember the fix? I would go back on bios but I dun't think that 2.4 supports the 2200+

    Quote
    Originally posted by saxile
    I usually leave my system on 24/7 so I'm just gonna leave it on until next week and I'm gonna get a soyo sy-kt400. Much better company, much better chipset , much better board.
    SHOCK!!!  I can't believe that you're serious  ;( !

Maybe you are looking for