WVC210 Camera selects wrong wireless network ... How to select wireless network? (multiple networks)

I have a WVC210 camera that works fine wired.
But I can not use it wirelessly, because on startup it connects to the wrong wireless network. All of my neighbors have wireless networks, so there are six wireless networks within range of the camera, it is therefore not suprising that the camera might select the wrong one first.
So.. how do I specify the wireless network that I want my camera to connect to?
I have tried various experiments, such as disabling all security on my wirless networks, but the WVC210 camera still selects the wrong wireless network.
I can tell that it is going to the wrong network, because after DHCP completes on my camera, the resolved IP is not from the subnet of the wireless network in my house.
For comparison, I found the PDF for a Linksys WVC54GCA it is possible to select from all available wireless networks... But I can't find a way with my WVC210 to select from all available wireless networks and stop the WVC210 from defaulting to the wrong wireless network.
Is there a way to list the available wireless networks and specify a chosen wireless network with the WVC210
For reference search for "select wireless" in the following PDF to see how this is acomplished with the Linksys Wireless G camera:
http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername1=Content-Type&blobheadername...
What is the equivalent technique for the WVC210?

Hi,
I bought linksys wireless ip camera wvc210 four years back. I lost camera installation CD. I tried to search it on internet but failed. Can you send me the link from where I can download or email me at [email protected]
regards
Hassan

Similar Messages

I just got a wireless printer and we followed the directions on how to hook it up to the iPad. Somehow it seems as if we hooed it up to the wrong printer. How do we disconnect this printer from the iPad so that we can connect the correct printer?

I just got a wireless printer and we followed the directions on how to hook it up to the iPad. Somehow it seems as if we hooked it up to the wrong printer. How do we disconnect this printer from the iPad so that we can connect the correct printer?

AirPrint finds any air print enabled printers on your wifi network, and won't find any printers that are not. So if you print from, say, safari, and it finds that printer, then that is your printer. It may have a different name than you were expecting.
Turn the printer off, and see if the print job still sees the printer. That will confirm that the one it sees is yours.
What happens when you send the print job?
If you are sharing a wifi network with others, and one of them has a AirPrint printer on the network, you will see that one. There is not way to have it forget one, so you will need to know your printer from the other printer, and select the right one.

Urgent Help Needed for WVC210 camera setup :)

Please help! I am trying to set up a Cisco WVC210 surveilance camera at one of the stores owned by the company I work for. Its a small business and I am the closest they have to an I.T person !! I have plenty of experience with software but not much on networking so need some idiot proof guidance ! The "administrative guide" is not worth the paper it is printed on!!
The store has a fixed IP address of 212.9.##.### I connected the camera using ethernet cable. Set the camera up using the software for the camera, with static ip address of 192.168.0.23. Set the SSID of the camera to that of the router (a Netgear one). It worked fine. I went to unplug so I could have it wireless and NOTHING !! It did work one time (no idea what i did differently!) but it would not work over the internet which is what we need it to do! I need the whole thing password protected too!
Is there ANYONE who can help me please??? I am at the point of running away from my work and never returning !!!! :s
Thank you

Hi Jodie,
Thank you for posting. In order to make the camera connect wirelessly, first set up the wireless settings in the camera to match the router. I usually open the router configuration page and copy and paste the SSID and Security Passphrase to the camera to avoid error. The next step is to unplug the ethernet cable and power cord from the camera. Then plug only the power back in and the camera should connect wirelessly.
For remote access to the camera you will need to forward port 80 to the LAN IP address of the camera. (192.168.0.23) This is done in the router. If you need help with port forwarding, you can search the web or call Netgear for assistance.
If you continue to need assistance with the camera, the fastest and easiest way to get assistance is to call Cisco Small Business Support. www.cisco.com/go/sbsc
Please go to www.cisco.com and click on "Register" in the upper right to create a user ID. This will allow our engineers to create a case for you.

Hi .after up dating my iphon5 to ios 8.1 and 8.1.1 my main cam dot wrong.dosnt work correctly.the cam frizing at the start for 10 sec.but second cam working normaly.

hi .after up dating my iphon5 to ios 8.1 and 8.1.1 my main cam dot wrong.dost not work correctly.the cam frizzing at the start for 10 sec.but second cam working normally.

I hate being the bearer of bad news, but from what I have read on the Forum and FAQ, you will need to un-install Network Magic from all of your computers making sure that no NM settings folders are left behind under users. Then unplug all wired computers and rebuild your network by re-installing NM in each computer before connecting it to your router. After you have added all of your wired computers, set up your wireless network and install NM and add each wireless computer.
That is a lot of work. I hope this helps.
Gary

My Macbook Pro keeps connecting to the wrong wifi. How do I stop it from doing this?

My Macbook Pro keeps connecting to the wrong wifi. How do I stop it from doing this?

Select the wi-fi tab in the menu bar then select "Open Network Preferences..." Select the "Advanced" button, then select the network that it is interfering with your MBP, then hit the - button and it will "forget" that network. Hope that fixes your problem, good luck.

What's wrong with networking since Leopard?

Hi,
I'm with Mac since years. I was a PC User once and spent hours with all kinds of network troubles. What convinced me with Mac right in the beginning was easy networking: It just worked!
But since Leopard things got worse: I have several MBP's, iMacs, Airport Extreme's and Airport Express's at different places which I installed, and I face the same problems at EVERY place:
- I can't connect to AExtreme for several reasons: timeout, security incompatibility, ...
- Sometimes only two Macs are allowed to connect to one AExtreme
- Airport doesn't find Aiport or any other networks for minutes
- After connecting to the router, can't get an IP (self-assigned IP only) - other PCs get an IP.
- Aiport Extreme crashes (yellow blinking)
- connection loss (even when AExtreme is very close)
Now I know about networking, about configuration, I've done this for years. Whatever I do, problems disappear and appear again, at different times, at different places with different hardware.
What is wrong with Leopard? Such problems remind me of times with Windows98 and stuff like that.

What's wrong with networking since Leopard?
on my network and many i have setup there have been no problems with leopard. However there are always teething problems with new operating systems. Thankfully with leopard only a tiny percentage of users experience technical difficulties.
can't connect to AExtreme for several reasons: timeout, security incompatibility,
is it set to use WPA/WPA2
Airport doesn't find Aiport or any other networks for minutes
sometimes my macbook pro takes a while to show up any networks if there are lots in the area this is because it is scanning them all.
After connecting to the router, can't get an IP (self-assigned IP only) - other PCs get an IP.
What kind of router are you using? What happens if you powercycle the router?
# Aiport Extreme crashes (yellow blinking)
# connection loss (even when AExtreme is very close)
Have you tried resetting your AE to default. reinstalling its firmware or checking for a firmware update?
Have you tried changing hte wireless channel your networ is broadcasting on?
What is wrong with Leopard? Such problems remind me of times with Windows98 and stuff like that.
Did you upgrade install your leopard installation or did you do clean (erase) installations?
Have you tried created new network locations?

I have copied over my music file to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit Preferences has the right location

I have copied over my music files to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit>Preferences has the right location?

Select one of the tracks with a broken link, press ctrl-i to Get Info. Say No when iTunes asks if you would like to locate the track, then look at the Summary tab for the location expects to find the file in.
Now try to locate the file in question. The two locations should give a clue as to what to do next.
Here is an example with a file I've deliberately moved from the new layout to the old pre-iTunes 9 layout.
This means iTunes is expecting to find the file at:
D:\iTunes\iTunes Media\Music\a-ha\Take On Me\01 Take On Me.mp3
but it isn't there because I've moved it to:
D:\iTunes\iTunes Media\a-ha\Take On Me\01 Take On Me.mp3
which is where it would have lived back in iTunes 8 (though the media folder would have been called iTunes Music back then as well).
If you can provide the expected and actual locations of a broken track I should be able to suggest the easiest way to resolve things.
tt2

When I send a text using siri the recipient shows that the text came from my email. How do I fix that so it show that the text came from my phone number and not my email address?

When I send a text using siri the recipient shows that the text came from my email. How do I fix that so it show that the text came from my phone number and not my email address?

Settings > Messages > Send & Receive > Start new conversations from:
Only your phone number is selected.

My iphone 5s camera is not working. how can I fix it?

my iphone 5s camera is not working. how can I fix it?

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

HT1414 my iPad did not came out the slide botton , how to make it back to normal , currently unable to used my ipad .

Hi ,
my iPad did not came out the slide botton , how to make it back to normal , currently unable to used my ipad .
History is my son try to enter too many time on wrong password .

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

No longer can access the WVC210 camera configuration utility

I am setting up the WVC210 camera, following the installation instructions I was successful in accessing the camera set up the first time(192.168.1.115), but could not get it to work on wireless. Now I can'tget back in tothe set-up to see if the settigns match my router. (works when hardwired, but not on wireless). (I may have changed the port to 1024?).
When I type into my browser the IP address on the face of my camera (now 192.168.1.104), I lo longer get the setup screen, can you help?

Hi,
The WVC210 is now being handled by the Cisco Small Business Support Community.
You need to register an account to be able to post there.

Wvc210 camera , fast motion

I need to know how to solve the fast motion on the WVC210 camera when I running the record video on Media player

need to know how to solve the fast motion on the WVC210 camera when I running the record video on Media player

How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

Try this general troubleshooting procedure:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

HT4796 I used migration to transfer iTunes from pc to mac book. It had me set up another user account. Now i have 2 user accounts and i have the iTunes on the wrong one. How do i get the iTunes on the original account.

I used migration to transfer iTunes from pc to mac book. It had me set up another user account. Now i have 2 user accounts and i have the iTunes on the wrong one. How do i get the iTunes on the original account.

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

WVC210 Camera selects wrong wireless network ... How to select wireless network? (multiple networks)

Similar Messages

Maybe you are looking for