WVC210 no Video to set area for Motion Detection

If I press the "Set Area & Sensitivity" button in the Motion Detection setup area I get the adjustment for the 4 detection windows on the left and on the right site only a black area where the video should be. But on top of this I can see a motion detection window if activated, but this is black too, only the top bar with e.g. "Window 2" in it is not black and I can move it by drag&drop.
I'm using:
Win 7 Ultimate 64
IE 8
Anybody any idea?

Hi Mark,
Thank you for posting. When you set up the SMTP settings the camera emails video or pictures? Have you tried setting up remote access to the camera to see if you can view the video from a remote location?
If you are unable to resolve this, please reply or call Small Business Support for further assistance. You can find a number here: www.cisco.com/go/sbsc

Similar Messages

* JMF PlugIn Effect/Codec Filter for Motion Detection : Source Example *

I have noticed some posts on here recently about reading a webcam�s pixel stream and as at least one example the processing of that data for robotics, or another for motion detection or tracking.
This can mean a requirement for fast frame processing, setting the datasource framerate, and to implement as easily as possible; eg a simple JMF effect or codec plugin to set on the processor.
I have a link as follows to some source and examples for such plugin effects, and some of you may find this interesting if not also useful.
See an updated http://www.exactfutures.com/index02.htm for the new download. Enjoy.

thanx Andy

Email notification for motion detection on webcanm center

no matter what i do, or what e-mail address i use, i run into an "starttls" errorI have used my emailgoogle emailyahoo email any one have a solution please?has anyone ever gotten the email function on motion detection to work ?(btw using VISTA (aka crap) sigh?

Try this -
MPEG-4
Resoultion : 320 x 240
Video quality
Fixed quality Normal
max frame rate 30 fps
MPJEG seting
Resolution: 320 x 240
Fixed quality Normal
Max frame rate 30 fps
2. Motion detection settings are fine...
Also you can try Mobile Streaming -
RTSP by default uses port 554, so you should forward port 554 into the static LAN IP of the camera...Once you do this, you can type in a URL from our cell phone browser like rtsp://MyName.MyLinksysCamera.com:554/xxxxx (where xxxxx is the access code...
Having the access code as part of the URL allows you to use a custom home page on your phone to instantly select the stream to view and no username or password prompt is required...Keep in mind that some mobile devices and cell phones support RTSP, but at this time many do not...Some phones like the iPhone do not support RTSP at this time. Check with your wireless carrier for more details if their network or wireless hardware supports the RTSP protocol...

I have an iPad 2 and receive e-mail through internet connection. When I delete e-mails, and clear my Trash folder, they re-appear. Setting are for remove from server when moved from Inbox. Any idea what I can do to actually delete them?

I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

WVC210 with Motion Detection does not stay in the correct position

When I set the camera in a specific position (setting it as Home) and then I enable Motion Detection feature (setting area and sensibility using the home position); if i have set the "Disable Motion Detection while position is incorrect" with "Go to Motion Detection position if idle" option the camera will reset the tilt after the time set has expired.
Is it a known bug (I have not found anything about that here)?
Is there a way to set which is the motion detection position to be held?

Hi M.Bordoni,
I will pass this onto the wonderful folks at the Small Business Support Center to get their opinion.
Just out of interest, I'm guessing you are utilities built within the camera to send a image somewhere ?
Are you using the free Surveillance monitoring application to store captured video on your NAS/PC or server ?
regards Dave

Best video format to encode for playback on iBook G4 1.2GHz?

I have been scratching my head for a week on this. What is the best video format that is highest quality and will playback smoothly on my iBook g4 and my iPhone 4? It has 1.25GB of RAM and I upgraded the HD to a WD 250GB 5400 RPM IDE drive 2 years ago and it's running dual boot Leopard 10.5.8 and Tiger 10.4.11 (keeping Tiger for Classic Mode).
I have a very large HD video collection consisting of 720p HD DVDs and 1080p Bluray discs that I have already spent a year to convert to MKV and MP4 files for storage on my media server. They have all been ripped and encoded with H264 using Handbrake. The average 720p movie is about 4.5GB and the average 1080p movies run about 8GB. I have over 100 movies stored on my media server and they playback fine on all my computers. They work fine on all my Windows 7 systems, they even play fine on my G5 2.0GHz DC late 2005 Powermac with 8.5GB Ram and the NVidia 7800GT.
Most of my 720p files can be reduced in size and or quality to 1-2GB and are playable on my iPhone 4, iPad 2 and even my little Acer Aspire One netbook in m4v or mp4 format.
I know my iBook is out of date, but no matter what compression method I have tried, the only thing it can play is MPEG-2 encoded media. And it cannot handle any h264 video I make, even at 480p settings using the simple profile. Since MPEG-2 takes 4-8GB per movie, this is a huge waste of HD space. And if I encode my movies like the old iPod video size, it looks like crap in full screen. I really want to store about 20 movies on this iBook for playback when I travel since I have 2 extra batteries. I need to movies to playback on the iBook and be able to transfer them to my iPhone 4 or iPad at any time.
Is there any method for getting 480p to encode and playback well on this iBook without making it look like crap or using the old DivX avi standard? If I have to reduce all my movies for playback on the iBook, I don't want to go lower than 480p because I want the same conversions to work on my iPhone 4 as well with decent quality. It is redundant to keep making copies of each movie for each device. Anyone have any suggestions? I don't want to take my little netbook around with me because the screen is too small and there is no opticle drive.
If anyone has any ideas, please post which Handbrake profile or other that can work... or let me know if my iBook is just garbage now. Thanks!

I am not asking you how to rip a DVD. I am asking how to convert any video file for decent playback on my iBook or iPhone!
This feature is available in iTunes so you can convert your DVDs to iPod playable formats. But when iTunes or Handbrake (or even Apple Compressor) convert anything, even my own videos made with Final Cut and iMovie, they will play on any iDevice other than my iBook unless I use the lowest most terrible video format.
I am just trying to figure out the proper video format the iBook can play. I am not ripping the DVD's right now... did that years ago anyways (and half of the videos I want to convert I made with iMovie during my travels in China and Hong Kong... I am just trying to play movies I already own on an older iDevice... my iBook. Converting purchased videos and home made videos is in no way illegal.
You misunderstand what I am asking. I am not trying to break digital copyright. If this is breaking digital copyright, then why does iTunes allow me to convert the movies for my iPhone 4 in the first place? You are telling me if I didn't purchase the movie from Apple I cannot watch it on my iPhone and iBook? That is not right.
I just want to know what the proper video playback requirements are for the iBook hardware. Plain and simple. If it is illegal in any way to tell me how to do it, just tell me what video my iBook supports. Apple tells me what video my iPhone supports ie. 1280x720p @ 29fps.... blah blah blah. Seems so far the iBook can only play a DVD MPEG-2 stream and no advanced codecs like h263 or h264. I just want to know what format the iBook can handle.
I have exported movies from iTunes and of my time in Hong Kong from iMovie and I cannot get them to play on the iBook at all if they are even 480p. So I just need to know what the max video playback is. If it can only play 320x240 or something, it is completely useless. I remember years ago when I bought the iBook, it did play the sample h263 and h264 videos that Apple had on their website (some of them 480p-720p)... but today it seems it can't play anything but 320x240 or less without getting locked up. I know the HD video requirements are G5 or higher... but we are talking DVD size cannot play in h264 mp4 formats, only MPEG-2 formats. This makes no sense? So I need to know the exact maximum resolution, framerate and codec this iBook 1.2 GHz can handle.
Don't tell my watching movies on my iBook, even the ones I made is illegal.

Motion Detection fail to set

When I check the box for Motion Detection I get an error message box, At the top "Messgae from webpage" " No Option Selected. Select one from the list". I had this problem when I first got these cameras a year ago and I fixed it by changing a Internet Exploer setting, now nothing I set makes a difference. I have Windows Vista 64bit and IE8. Vista did an update that made me reinstall McAfee and anthinicate Adoby CS, Proably the reason. I can send you a screen shot through e mail.
[Mod Note: Email address removed. Get in touch with topic starter through PM for details.]
Message Edited by iamgiantherockstar on 09-07-2009 10:35 AM

When you enable the Motion Detection settings on your Camera you need to Input the Email settings on your Camera.... You can change / Enable the Motion Detection settings on you Camera by Web UI or by the Camera Utility...
Click Here how to enable the Motion Detection Settings on your camera by Web UI...
Open the Camera utility on your Computer and in that you need to select the Option "Motion Detection" and then you can enable the Motion Detection on your Camera...

WVC54GCA motion detection in utility setup not working

After reading this answer that basically says that if you use the web-based advanced setup for motion detection, your recording is limited to only 5 sec., I disabled motion detection in the web GUI, and decided to setup motion detection in the utiity setup windows.
I can't make it work correctly: I have firmware V1.00R24:
This is what I do: I check Enable Motion Detection Recording in the Network Camera screen. In Preferences, I set the Recording Path, set 10 secs Motion Detection record before and after motion detection. I have 15 GB of available disk space.
Under Recording Schedule, if I set a schedule, say, daily from 7am to 7:30am (or any other interval), it will record for the whole duration independently of any movement or lack of movement in the field. If I don't set a recording schedule, it won't record anything.
I am not interested in triggering emails or FTPs, which apparently can be done only with the Web GUI anyway. I just want to record 10 secs before and after every instance of detected movement.
Am I missing something?
Thanks for any suggestion.

Well, I am still struggling with this motion detection.
@Carrot: Linksys seems to say that the 5 second limitation is only for the web-based setup, which I didn't use. If you read this answer from their knowledge base, you will see they recommend using the utility to obtain longer recording times. In any case, when I follow their recommendation, I don't even get 5 seconds. The only thing that gets recorded are the intervals I specify in Recording Schedule, and then it records everything, motion or no motion. Without entering a recording schedule, nothing gets recorded.
In any case, if you have any specific third party software in mind that would do a better job with motion detection, please let me know. I have been using successfully YawCam, which works with USB webcams, but I haven't found a way to make it work with this IP camera.
I may endup using my own video software (using avisynth) to detect movement from full recordings.

PVC2300: Motion detect. suddenly not working

Hi!
Installed a PVC2300 last week, and everything was working well. But after adjusting its possition a bit this morning, the motion detection has stopped working.
Feel like I've tried everything to get it working again. Tried several changes in the settings, adjusting the threshold, reinstall the newest firmware (v.1.1.0), restore to factory settings, deleting stored videos, changing to full screen detection, but still no luck.
The camera is monitoring an open area. A person can walk across the area and not beeing detected by the camera, but sometimes records sequences where nothing happens.
Any idea?

Wow, that was alot of work to try to determine the cause. I was thinking something like light in the new position (especailly cause you say its recording when nothing happens). Can you try positioning it in the original position and see if it works better in that environment?
Do you use the camera GUI itself to paint the windows with sensitivity thresholds for motion detection using Internet Explorer with ActiveX?
Do you notice anything in the LOG file of the camera when there is motion that meets the criteria you set (it should always say motion detected and then FTP or HTTP or FTP logs depending on where you send the motion clips) itself.
Steve

Pvc2300: false positive with motion detection

Hello!
I bought 3 pvc 2300 cameras. I tried motion detection with camera's software and with "Active webcam" software and I received a lot of false positive mails.
1. with camera's software, I set event with motion detection & sent mail, but I receive a lot of mail when there isn't motion (I saw registrations and images)
2. with Active WebCam software I use Linksys cameras and Panasonic Cameras. With Panasonic cameras all is ok. With Linksys cameras, about every hours there is a black frame, so I receive a mail from motion detection. Black frame arrive about every hours, after 60 minutes from last black frame. That is very strange!
I changed sensitivity, check frequency, number of frame at second, but I have same problem.
Can you help me?
Thanks
Mary

I have 2 Panasonic cameras too and I need one software to manage all cameras.
sensitivity: on active webcam software, I changed sensitivity of motion detection
frequency check: on active webcam software, I changed from check motion every 0,1 second to every 5 seconds
number of frame: on Linksys software I changed Max Frame Rate from 15 fps to 6 fps.

Start recording video at a set time of day and off at a set time of day, and or can start rec video when motion detected, till no motion detected for a set period

is there an app for iphone which can be set to start recording video at a set time of day and off at a set time of day, and or can start rec video when motion detected, till no motion detected for a set period. basically someone is vandalising my vehicle and i really really want to catch the mongrel
thanks for any suggestions

Nope.

Good Premiere pro Cs5.5 Video Editing Computer Set Up For Under $3000

Hey everyone im hopeing to hear for Harm Millaard input on this and anyone elses who understands PC computers for video editing. I need to build a computer set up for my specific needs. I am a youtuber who makes videos for a living and I need a speedy computer for editing primarily in premiere pro CS5.5 and sometimes in After effects. I use magic bullet 2.0 color grading in almost all my videos so that slows my computer down alot. The current computer I have now shuts off when ever it runs to much stuff and gives me the BSOD so its extreemly fusterating because editing something small can take me all day because of the constent shutting off. Mostly does BSOD when I uses Magic Bullet 2.0 I shoot with DSLR footage but once in a while it will happen out of the blue when running alot of things but mostly when exporting. I need a list of specs that will all work together to give a perfect workflow for my needs and I also would like advice on what Raid because I dont fully understand it as well as what back up drives etc should I have. I plan of buying the specs and having someone build it for me and set up raid etc that knows how to do all that. In case some of you wonder what type of computer I have now these are the specs if you need more information on what I have in my computer ask exactly what info you want to me to tell you and ill look it up.
If you have advice on specs I dont have to re-buy that I could take out of this computer to save money then that would be better as well. I currently have no back up external drives as well so Idk what I should buy for that as well. Thank you all for your time a head of time!

Well!!!!.....where do I start?? You must spend some time here reading all the valuable info that has been presented and discussed many times here. Basically, PPro is a very demanding , PROFESSIONAL program that needs beefy and SPECIFIC hardware to run properly.
AMD CPU will not cut it.....it lacks the necessary instruction set that Intel has that apply to video processing.
You need a fast Intel i7 CPU for starters.
You do not mention video card.....NVidia CUDA card of over 1GB video memory is required to enable the "Mercury PlaybackEngine", which provides a TEN TIMES INCREASE in rendering speed of previews.....not to mention accelerating the export process by handling some specific effects during export.
Some DSLR codecs,( like Canon MOVs) cause PPro....which is a 64bit program..... to open the 32 bit " Quick time Importer" process, ( as Quick Time is 32 bit), slowing down the process, even with good hardware. Editing highly compressed consumer codecs,( AVCHD,etc.) in real time ,then exporting can be very taxing on a computer, requiring top -notch components. Even if you do it the old way and transcode to a more edit friendly codec before editing.....you would then need a larger,faster disk system to handle the huge files at a high speed!!!
16GB system memory is OK for 5.5.....with 6 and later, 32GB is better.
Two separate hard drives are the required minimum for PPro......currently, the best performing and cheapest setup would be : C drive= 120GB quality SSD, D drive = 2x 7200 RPM HDDs in onboard RAID 0 for pagefile,previews, and all cache files. E drive= same setup as "D", for media,project files, and export. F drive = large 7200 rpm disk for necessary backup of important files and backup of "D" drive. All drives should "indexing" and" compression" turned OFF,( under drive Properties window).
Less expensive would be just three separate 7200 RPM HDDs...that could be OK with just DSLR footage which is so compressed that it requires less actual MB/sec., unless you are using many tracks of video, upping the requirement needed.
Read the many posts and articles by Harm Millard and Bill Gehrke....they have contributed a tremendous wealth of knowledge and experience to the readers.....preventing many from making bad purchases and expensive mistakes when trying to construct a machine that will perform well....their website, PPBM5 is invaluable as it can show you all the video benchmark results of differently configured machines. It is a good guide as to what you may want to build,or, purchase.....Good Luck!!

Motion detection WVC54GCA setting custom area.

Now onto the next issue with the WVC54GCA.
When setting up the E-mail and configuring the motion detection with a minimum time between motions at 5 minutes I still get more then 100 mails a day.
IMO setting the custom area is not functioning. It just keeps detecting everything in the full window.
Does anybody know a solution or is it just this bad?
If so is there any new firmware coming out, or do we get a change to fiddle with it ourselves, by opening up telnet or any other way?
(Just wished I know the root password )
From the 100 mails are atleast 75 false. If I could bring that back to 20 or less it would be acceptable for me, but this is too much.
Maurice

great_white wrote:
You can check for the firmware on www.linksys.com/downloads.Try to reflash the firmware on the camera,reset the camera and reconfigure it from the scratch.
Sorry I should have said I have the newest firmware although you could have guessed, because I was asking for an update.
Maurice

What is the best FC Pro Easy Set up for video shot with an iPhone 4?

what is the best FC Pro Easy Set up for video shot with an iPhone 4?

There isn't one. You have to convert the media to one of the ProRes codecs, probably ProRes LT would work best. You need to do this in Compressor.
Easy setup isn't relevant as it's options are for tape based media, which this isn't.

Enabling Motion Detection on 2621V: "Video for other platform/os" error

Team,
trying to get motion detection on my CIVS 2621V enabled. Running Firmware Version: V4.4.2-2
I always get the Video for Other Platforms error not matter which browser that I am using or different systems.
Searched around and found some posts from some COTS video surveillance systems from Cisco running into the same issue but nothing here.

It's likely you'll need a much older version of IE in order to set this up natively. I believe the original user guide for the 2621 actually called for IE 6 on Windows XP.
http://www.cisco.com/c/en/us/td/docs/security/physical_security/video_surveillance/ip_camera/2621/user_guide/2621ug.pdf
... although I seem to recall doing this with something as recent as IE 8 without issue.
I actually have to keep a VM and an old XP workstation with VNC on it to work with some of the much older hardware :-S

WVC210 no Video to set area for Motion Detection

Similar Messages

Maybe you are looking for