WVC210 Wireless-G PTZ Internet Camera Audio question

I cannot get the Audio OUTGOING to work so that someone can hear me while I am viewing them on the camera.
Is there some trouble shooting that I can do or is there a known problem?
I have made all the necessary adjustments in the setup of the camera and it still does not work... I own 4 of them.
thank you

Hello Mr Autieri, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
There are a couple of places to check in the camera when you have speaker issues. One is like you mentioned, under audio settings and checking the duplex settings. Also check on the main screen, there is a button that is sometimes defaulted to off. It is only visible when the audio is enabled. Once you enable it here then you should get a volume slide to adjust volume as well.
If this doesn't solve your issue, please call in and let one of our answering agents help troubleshoot this further.
Thanks
Eric Moyers
Cisco Network Support Engineer
CCNA, CCNA-Wireless
1-866-606-1866

Similar Messages

How to install my WVC210 Wireless-G PTZ Internet Camera so I can view it from any where in the world.

Hi guys I just bught a
WVC210 Wireless-G PTZ Internet Camera
I need to install it so that I can view it from any where in the world. I have no Idea how to do this.
I would like if some one can send me a video tutorial on how to do it.
I have a website that I am runing so I guess I can use that if I need something like Hosting and Domain things.
I want to know if it is posible that I can some how configure it so I can view the camera on one of my websites page.
For exaple: www.example.com/mycamera???
If not well I would love to here the options I have.
Thank you very much in advance!

Rogerio,
I have never seen a router like you have and I wouldn't dare advise you about changing the settings. It appears that it is a router/modem that was provided by your ISP. If this is the case, I recommend that you call your ISP and ask them for Port Forwarding assistance. You need to forward port 80 to the LAN IP address of your camera. The LAN IP address of your camera is the IP address that you use to log into the web interface. You should not need to change any settings on the camera. After you have had the ISP help you forward the port to the camera, go to ipchicken.com and you will see your WAN IP address. Write that address down and then go to a remote location and type it into your web browser. You should get the login page of the camera. Note that your WAN IP is subject to change. You can ask your ISP to provide you with a static IP address which will be an additional charge each month but your IP address will not change. Another option is to use a service such as dyndns to create a unique URL that you can use to access the camera remotely even if your WAN IP address changes. We can discuss that after you get access to the camera if you have further questions.

Camera audio question

I have a USB microphone which I use with my iPad Garage Band and works very well with my iPad.
I want to use it to get better audio on videos I need to make but when the microphone is plugged into the iPad I get no sound recorded at all while shooting video.
I've looked for something to toggle or switch or click on but find nothing. Maybe it's impossible?
I'd very much appreciate any suggestions.
Thanks
Mark

Hello Mr Autieri, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
There are a couple of places to check in the camera when you have speaker issues. One is like you mentioned, under audio settings and checking the duplex settings. Also check on the main screen, there is a button that is sometimes defaulted to off. It is only visible when the audio is enabled. Once you enable it here then you should get a volume slide to adjust volume as well.
If this doesn't solve your issue, please call in and let one of our answering agents help troubleshoot this further.
Thanks
Eric Moyers
Cisco Network Support Engineer
CCNA, CCNA-Wireless
1-866-606-1866

LAN IP keeps changing on my wireless internet camera using Linksys E1200 router

Although it was working fine for about a month the LAN IP for my wireless internet camera now keeps changing almost on a daily basis for no apparent reason. I am currently away from home and am unable to access the camera for live coverage until I determine and reset the IP. Fortunately the camera is working and still sending emails on motion detection which includes a note with the IP which I then can use remotely access my local computer and then to the camera for live coverage but this is a time consuming method. To be able to get access from my current location I then have to remotely log on to my home E1200 router and change the address in the port forwarding section of the routers setup program in order to use the new IP directly.
I know I could have avoided this problem by seting up the camera with a static IP but for some reason I had a problem doing so and due to time limitation I ended up accepting the dynamic IP assignment.
What could be causing the change and more importantly is there anything I can do to the router setup to minimize the problem?

There hasn't been a power failure at my house in over 3 weeks at least none that my UPS system has sensed but there have been many camera IP changes during that perioid . Perhaps there has been some local power interuption to the camera or the router. I wonder if a local power sag or surge might be sufficient for the camera to restart. I guess further investigation will have to wait til I return and regardless of what I find I'll switch to a static IP for the futrue.

I need a Wireless G Internet Camera for the MAC

I would like to buy a mac compatible Wireless G Internet Camera. Ive found lots of PC/Windoze ones but no mac ones... I would like it to be under $100 street price like all the PC cams...
Any help?
Thanks guys!

The important factor that I found for compatibility is that the camera's web server needs to be Java based, and not rely on any ActiveX Microsoft technologies. It can then be used by any browser in MacOS, Windows, and Linux.
About 4 years ago I bought a D-Link DCS-900W for around $200. It worked well out in the barn while my wife was waiting for a mare to foal. Friends all over the web were able to tune in and check out the situation.
Currently, I've seen that the D-Link DCS-920 Wireless G is available from the usual suspects all over the internet for between $70 to $90.
We found that the camera's work well if they are in a well lighted area. Low light cameras can get pricey. Don't expect real motion high def, especially if you are pushing the wireless distance limit.

WVC210 wireless video surveillance camera

I have a WVC210 wireless video surveillance camera which i can not access from home or cell phone.
I recently upgrade my home Comcast wireless receiver box and lost connection to my WVC210 wireless video surveillance camera.
How can I fix this problem?

Hi Eric,
thanks for replying back.
1) When you said you upgraded your Comcast Wireless box, do you mean you upgraded the firmware or got a completely new Box?
I got a complete new box.
2) Are you trying to use the camera wired or wireless?
Wireless
3) Are you trying to connect the camera to the Comcast box or a router? What network equipment do you have between the Comcast and the camera?
only Comcast box. It has built in WiFi
4) If the box is (new or different than the one you originally had) did you copy over the settings from the older one?
No i did not copy over the new settings. But I will see If can reconnect the old wifi router and copy the old settings.
5) What lights are showing on the on the camera? What address is showing on the LED Screen?
Only the power light is on and showing a fixed IP address 192.169.1.108
Thanks for your help.

Wireless Live Internet Camera

I am on a Macintosh (OSX) and recently plugged in my wireless camera again. The both the power and wireless lights are illuminated (green). There is not an installer for this product on the Macintosh. Also, the user guide download does not open fro Creative's site.
Anyone have the first steps they can share for me to start using this?
I presume I reset the device and plug it into an active ethernet connection for me to administer it....
Any information would be appreciated.
Thanks,
Jeffster?

Hi Jeffster,
The Wireless Live Internet Camera (Model number: 73VF0800000) is not going to work in your Mac (OSX) nor it would have an installer. Below is the minimum system specs:[*]Minimum system requirements: Windows 98SE/Me/2000/XP; 550 MHz or faster processor; 128 MB RAM; 300 MB free disk space; Internet Explorer 5.5 or higher, or other Web browser; cable/DSL connection for Internet viewing; Active-X 8.0 or higher; CD-ROM dri've; available USB port; wired or wireless network adapter with TCP/IP protocol installed.<Cheers.

Help! looking for internet camera compatible with Mac

I need help! I purchased a Mac recently and so far I am very happy with it. However, we just had a baby and I'd like to see and hear my baby from my computer at work. At work we use PCs and at home we havea iBook G4. I bought a D-link wireless G internet camera, the DCS-950G, but I could not install it because it requires you to have a PC for initial installation. I've looked around the web but I've been unable to find an internet camera that works with the Mac. I am desperate and frustrated! Does aynone know of an wireless internet camera that works with the Mac? I'd greatly appreciate any help you can provide. Thanks.

Hello B Real Brad
You do not say which DV camcorder you have. The exact answers to your questions depend upon your camcorder's features and user guide instructions. If you experience problems when you try your camcorder, check your camcorder's users guide instructions. That having been said, here are the answers to your posted questions:> Do I need to have a firewire cable to successfully use it through iChat ...
Firewire will be easiest. If you have a Firewire cable to download your DV Video to iMovie, that one will work fine.
... or can I use the normal usb cable?
Depending upon your camcorder, that may work with additional software and or hardware, but, if your camcorder offers it, Firewire will me much easier.
.. is the quality ... better using a DV camcorder ... ?
Usually. This depends on which camcorder you compare with which webcam.
Some people like the image quality of their camcorders better. See John Kennedy's "Cameras and Image Quality", the Sat - October 30, 2004, blog for a comparison. (John's is a very high quality camcorder.)
See this link for my reasons for using a webcam when I do not need portability or highest possible quality. Some of the reasons may be of interest to you.For specifics on how to get going, see my recent response to Tony Keogh. Although Tony asks specifically about a particular Sony model, the specific suggestions I made there should apply to your camcorder, too.
If the above do not get you going, I suggest that you start your own topic and give as many specifics as possible about your system, your problem, and what you have already tried. Your questions deserve the individual attention they will get in a separate topic.
Here are a couple of other suggestions for your consideration:
(1) I see from your other posts that you use Miglia TVMini. Be aware that some AV devices and third-party items can cause possible hardware or software conflicts with iChat.
(2) Also, your system info shows that you are using 10.4.4. I suggest that you update to the latest available version of Tiger using the following method:- Repair permissions.
- Then download and apply the Mac OS X 10.4.9 Combo Update (PPC).
- Finish with another Permissions Repair.The latest Combo Update offers several additions and improvements over the older versions.
Cheers,
Jim
Mac OS X (10.4.9) G5 DP 1.8 External iSight

Trying to install internet camera thru Windows XP within Parallels

I recently purchased a Panasonic KX-HCM250 wireless internet camera and am trying to configure it using my Mac Book Pro thru Windows XP running within Parallels. I managed to get the camera to show the video images thru the internet using the provided setup software that came with the camera. However, I can't create a website account for it since the program that came with the Internet Camera is asking for the default gateway, DNS server 1, and DNS server 2 which are all showing as 0.0.0.0. I searched for it in the Network category within the Systems Preference within Mac OSX, but its not showing anything. I got in touch with my ISP (Roadrunner High Speed Online) they tried to help me but was unable to retrieve the DNS & Gateway either. They say it may be because the internet camera is going thru a router first, that's why its not showing the info I need. My network connection is as follows, the airport extreme is attached to the Internet modem. A Lynksys Workgroup Hub is attached to the Airport Extreme. I also have an Airport Express where the Internet Camera is currently hardwired to (it was previously connected to the hub). However, can't get any info on the Gateway & DNS.
Can anyone help me with this. I'm very new to networking and just learning as i go. thx.

Hi Duane,
Thank you for your quick response to my post.
So the WAN side IP address of the AEBS is the same as the Router info, which is the same as the DNS & Gateway info? I went to the Network section in my Systems Preferences, went to TCP/IP for the Airport, and that's where i found the value you mentioned (10.0.1.1) under Router. The IP Address has a different value on it.
Anyway, I tried to enter this value & the IP Address value in the Internet Camera setup software and webpage, it was saying that both attempts were a success, but it still wasn't sending me the info to setup the webpage for the Camera (it mentioned that I will be receiving an introductory email with the instructions to register the camera (if it is able to communicate with my camera.)

Help with internet cam and ports

I have a Linksys WVC54GCA wireless Internet cam. I have set the IP to a static address. Created a DDNs account and have the address. I can see the site/cam on any computer on my network but cant seem to get it to port forward out . Help from anyone would be great. Thanks

That is strange, because.
Earlier when you posted what your domain was, I went to http://network-tools.com/
and entered that domain name, you where ping-able / traceroute-able / I could find out the correct public IP and ISP address behind that domain.
But now, I can not see the correct IP address.
Now I am starting to wonder about what is going on..
I think know what was going on, why you could not connect to your self by public IP.
Auth failed, solve that first. Then I will tell you what to do..
That means...
While I don't use the same DDNS provider: Make sure that, you:
#1 Are not running any DDNS client on the computer too. That, I, suspect will cause that issue.
Run the DDNS client either on the router (if the router supports it) or on a computer behind that router.
#2 You enter in the correct user name and password ( "password" is not the same as "Password" )
Message Edited by dslr595148 on 10-21-2008 03:20 PM
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Trouble with my wireless and cable internet connections with S05

I got a Lenovo S205 last month and have been having trouble connecting it to the internet.
I connect wirelessly to my internet box and sit about 1m away from it. Even though I am so close and my connection shows full strengh on my computer when I am browsing the internet pages often fail to load or miss images or css. I can sit and hit refresh for a mintue before the page loads but my wireless icon never says it has lost connection or signs me out of msn etc.
I tried a different brower to check it was not that but it is still the same. I also find when speaking on skype that my video feed will stop and start again and the sound doesn't come through smoothly.
Because of the trouble and how close I am to the internet box I tried with a cabel but when I plug it in and turn off wireless the computer doesnt seem pick it up and says I have no connection. I tried the same cabel in my old laptop and it worked fine so it seems something wrong with my port.
What can I do to fix it? Thanks
Stephanie

hey steffi,
try uninstalling both the wired and wireless drivers for your unit.
let windows install its own generic drivers and try again on both wired and wireless connection at your home.
if possible, try it at a different location and see if it makes any difference. If you are able to connect and have no problems browsing the web on a different wireless/wired connection, then you will need to check the settings of your home's modem
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Audio question for XL1/FCP users.....

Hi,
I used an XL1 with radio mic and need to know what is the best way to capture my audio.
FCP gives me the option of capturing the 1st 2channels, the 2nd 2 channels, or a 4 channel mix....
Now the first two channels are the on camera mic, the 2nd two channels are the wireless mic.
Is it best to capture the 2nd 2 channels as that audio is more important but I would also like to have the on camera audio just in case of drop outs? So how does fcp capture the 4 channel mix? Is the left side the first two channels and the right side the 2nd two channels or are all 4 channels mixed together with no separation?
Just wondering because if I want both sets of audio would I have to capture the audio twice?
thanks for the replies...
mthespian

That's exactly what I did....Just doing a test of the 4 channel mix was and is useless to me...I need to control the wireless separately to the on camera stereo mix so I captured the audio twice. A little more work, capture wise, but the wireless is great on it own with a little from the on camera mic.
that's for everyone's input....I basically did some tests first and then went from there....
rob

Internet Camera

I'm looking for a dependable wireless outdoor Internet camera that works with both Macs and PCs. We intend to setup two in our community. One will be installed on my home pointing towards one area, the second will be installed on my neighbor's home three blocks away. I have a Mac Pro setup with Airport Extreme. My neighbor probably has a PC with Windows. Any suggestions?
Thanks,
Kelly

These are a bit pricey, but they work REALLY well. We use them in my office.
Figured it's at least worth mentioning.
http://www.axis.com/products/cam_207w/index.htm

New iMac bootcamp XP sp2 no internet no audio

I'm having a bit of trouble getting my wireless connection and audio to work on XP professional sp2. I have a week old 24" iMac. I ran bootcamp, installed XP, inserted the OSX install disc1 to update the drivers, and still no internet nor audio. When I go to network settings, my wireless network is not appearing... and instead a 1394 (firewire) network is showing as active... but of course that doesn't do anything for my internet connection.
Any ideas?

I have the same problem. No audio or internet. Can't adjust the volume in the control panel because the volume control is grayed out. An active ethernet network is detected but no internet connection.
I installed Win XP Pro SP2 from an OEM disc, which I was assured is identical to the retail version (which is no longer available).
Installation via bootcamp was anything but smooth and I first thought it wouldn't work.
Used the FAT32 format.
Other info: Intel Core 2 Duo 2.16GHz white iMac; 1.5G RAM.

Can we use Apple tv to present with iPad wirelessly but no internet? if not, is there any other way?

Can we use Apple tv to present with iPad wirelessly but no internet? if not, is there any other way? Please tell me what's the best solution if I want to present what's on the iPad screen to TV or projector withtout using internet network or small range of bluetooth.

yes

WVC210 Wireless-G PTZ Internet Camera Audio question

Similar Messages

Maybe you are looking for