WVC54GC Installation and Setup files

I can't find the installation and setup files for WVC54GC version 1.1.  The only files located on the download page is the firmware update and manual.  But for WVC54GC version 1.0 the installation and setup files are available along with the manual and firmware update.
Should I assume that the version 1.0 installation and setup files will work with version 1.1?

If you can see the Setup wizard for WVC54GC v1.0, you can download and install it for the WVC54GC v1.1 from the Linksys/Cisco website or you can download it from the link: http://homesupport.cisco.com/en-us/support/cameras/WVC54GC

Similar Messages

  • SAP Server Console - Inquiry on installation and setup

    Hello,
    I will be doing a setup of an SAP Server Console for the first time. It is necessary because we are moving all systems to a new data center. Based on my reading, the tool can be used to provide telnet and web access to an SAP system which I think is the main purpose why we have one.
    In line with the installation and setup, I have the following questions:
    1. In the installation guide, it mentioned that there are two ways of info exchange with SAPConsole namely via telnet and via web server. To confirm that what we have is info exchange via telnet, it is enough to check that sapcnsl command is executable and that we have georgiasoftworks installed in the server?
    2. Also in the installation guide, it explained that SAPGUI on the machine where SAPConsole is installed is no longer necessary as of 7.10. How can I check the version where my SAPConsole is currently running on?
    3. Since the setup that I'll do will be some sort of "migration", can anybody provide a checklist to ensure that the setup that I have with the old server will be exaclty the same as in the new one? I have read the installation guide for Standalone SAPConsole 7.10 and it does not show a backup/restore process. I am assuming that I will need to start from scratch but I am wondering if there's a procedure to make the "restore" to the new server seamless like making sure that the profiles that exist in the old server will exist in the new server after moving it.
    4. Is there a different profile that is needed to access the configured system in SAPConsole? Or if you have SAP system access to the system, do you automatically have access to the same system via SAPConsole?
    By the way, besides Standalone SAPConsole 7.10, I have already read SAP Notes 190005 and 1043241 as well. If there's any other useful note that you can recommend, I'll appreciate and take a look.
    Thanks!

    I think i have managed to get the answers for 1 and 2:
    1. SAPConsole is only being used for RF guns therefore only for telnet connection
    2. We are currently running on 640 which was delivered together with SAPGUI
    Now, my main concern is #3 or on how to make all the settings the same in the new server for SAPConsole after moving it to a new hardware. I am thinking of some files/folders and registry entries.
    Please advise.

  • 3 posts in one on the Leopard "installation and setup" forum

    I just posted a topic "Cannot disable trackpad pinch open & close" on the Leopard "installation and setup" forum and the topic was posted 3 times.
    I first previewed my post, then posted the message from the preview pane. Interestingly, it took the forum server a very long time to display the preview pane ... and then a very long time (several minutes) to post the message after i clicked the post button.
    I did not get impatient and click any buttons twice ... I just waited, and somehow the message got posted 3 times. I can believe I did something inadvertent on my end ... but impatiently hitting the preview and post buttons while waiting was not it.
    If someone with power can remove 2 of the 3 repetitions, I'd appreciate it ... I couldn't figure out how to delete them myself

    fiddleaway wrote:
    Thanks. Is there a direct channel to the moderators anyone can use in circumstances like this?
    This is it. The Feedback forum is the place to post requests for the Hosts.
    I'd like to find out why my posting actions are generating multiple postings.
    This has been happening to many people and as Terence mentions seems to be a fault in the forum software. Some have noticed that it occurs when there appears to be a server lag. That is, they'll click the button to post and there will be a long lag in response from the web site, and then even though they never clicked another button, several posts will appear.
    It's not anything you did.

  • OAS Installation and Setup Doc(s)

    hello everybody,
    i hope if someone can point to me a site i can get the Oracle Applications Server Installation and Setup Doc(s).
    thanks

    At the OTN site, click the documentation link on left frame. Here you can search for the particular documentation that you need and either print html or pdf format.
    Sue

  • SQL Server 2008 R2 install fails on Server 2008 R2 at installation of setup files with Exit code: 0x84C40013

    Hello,
    I am trying to install the SQL Server 2008 R2 Client and managment tools on a Server 2008 R2 box, but the install is failing when trying to install the setup files with no error. I looked at the SQLSetup_1 log file and this is what I found:
    08/13/2014 20:26:10.743 ======================================================================
    08/13/2014 20:26:10.743 Setup launched
    08/13/2014 20:26:10.743 Attempting to determine media source
    08/13/2014 20:26:10.743 Media source: C:\Users\ercklentzn\Desktop\SQL Server 2008 Ent Ed R2\
    08/13/2014 20:26:10.743 Attempt to determine media layout based on file 'C:\Users\ercklentzn\Desktop\SQL Server 2008 Ent Ed R2\mediainfo.xml'.
    08/13/2014 20:26:10.775 Media layout is detected as: Full
    08/13/2014 20:26:10.775 Not a slip stream media, so continuing to run setup.exe from media.
    08/13/2014 20:26:10.775 /? or /HELP or /ACTION=HELP specified: false
    08/13/2014 20:26:10.775 Help display: false
    08/13/2014 20:26:10.775 Checking to see if we need to install .Net version 3.5
    08/13/2014 20:26:10.775 Determining the cluster status of the local machine.
    08/13/2014 20:26:10.775 The local machine is not configured as a cluster node.
    08/13/2014 20:26:10.775 Attempting to find media for .Net version 3.5
    08/13/2014 20:26:10.775 .Net version 3.5 is installed
    08/13/2014 20:26:10.775 RedistMSI::GetExpectedBuildRevision - Setup expects MSI 4.5.6001.22159 at the minimum
    08/13/2014 20:26:10.775 Attempting to get Windows Installer version
    08/13/2014 20:26:10.790 Windows Installer version detected: 5.0.7601.17514
    08/13/2014 20:26:10.790 RedistMSI::IsVistaRTM - Not Vista RTM build
    08/13/2014 20:26:10.790 Required version of Windows Installer is already installed
    08/13/2014 20:26:10.790 Attempting to get Windows Installer version
    08/13/2014 20:26:10.790 Windows Installer version detected: 5.0.7601.17514
    08/13/2014 20:26:10.790 RedistMSI::IsVistaRTM - Not Vista RTM build
    08/13/2014 20:26:10.790 Required version of Windows Installer is already installed
    08/13/2014 20:26:10.790 Local setup.exe not found, so continuing to run setup.exe from media.
    08/13/2014 20:26:10.790 Attempt to initialize SQL setup code group
    08/13/2014 20:26:10.790 Attempting to determine security.config file path
    08/13/2014 20:26:10.790 Checking to see if policy file exists
    08/13/2014 20:26:10.790 .Net security policy file does exist
    08/13/2014 20:26:10.790 Attempting to load .Net security policy file
    08/13/2014 20:26:10.806 Processing entry ("MSVCM80", "Native")
    08/13/2014 20:26:10.806 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.806 Processing entry ("MICROSOFT.SQLSERVER.CHAINER.SETUP", "Native")
    08/13/2014 20:26:10.806 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.806 Processing entry ("MICROSOFT.SQL.CHAINER.PACKAGE", "Native")
    08/13/2014 20:26:10.806 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.806 Processing entry ("MICROSOFT.SQLSERVER.CHAINER.INFRASTRUCTURE", "Native")
    08/13/2014 20:26:10.806 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.806 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.BOOTSTRAPEXTENSION", "Native")
    08/13/2014 20:26:10.806 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.806 Processing entry ("MICROSOFT.SQLSERVER.SETUP.CHAINER.WORKFLOW", "Native")
    08/13/2014 20:26:10.806 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.806 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLCONFIGBASE", "Native")
    08/13/2014 20:26:10.806 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.806 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SFC", "Native")
    08/13/2014 20:26:10.806 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.822 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SETUPEXTENSION", "Native")
    08/13/2014 20:26:10.822 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.822 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.MSIEXTENSION", "Native")
    08/13/2014 20:26:10.822 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.822 Processing entry ("MICROSOFT.SQLSERVER.CHAINER.EXTENSIONCOMMON", "Native")
    08/13/2014 20:26:10.822 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.822 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCO", "Native")
    08/13/2014 20:26:10.822 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.822 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCOEXTENSION", "Native")
    08/13/2014 20:26:10.822 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.822 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONFIGEXTENSION", "Native")
    08/13/2014 20:26:10.822 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.822 Processing entry ("MICROSOFT.SQLSERVER.DISCOVERY", "Native")
    08/13/2014 20:26:10.822 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.822 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.UIEXTENSION", "Native")
    08/13/2014 20:26:10.822 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.837 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SSTRING", "Native")
    08/13/2014 20:26:10.837 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.837 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.WIZARDFRAMEWORK", "Native")
    08/13/2014 20:26:10.837 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.837 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARDFRAMEWORK", "Native")
    08/13/2014 20:26:10.837 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.837 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARD", "Native")
    08/13/2014 20:26:10.837 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.837 Processing entry ("MICROSOFT.SQLSERVER.MANAGEMENT.CONTROLS", "Native")
    08/13/2014 20:26:10.837 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.837 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION", "Native")
    08/13/2014 20:26:10.837 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.837 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONNECTIONINFO", "Native")
    08/13/2014 20:26:10.837 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.837 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RULESENGINEEXTENSION", "Native")
    08/13/2014 20:26:10.837 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.853 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CLUSTER", "Native")
    08/13/2014 20:26:10.853 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.853 Processing entry ("MICROSOFT.SQLSERVER.INTEROP.MSCLUSTERLIB", "Native")
    08/13/2014 20:26:10.853 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.853 Processing entry ("MICROSOFT.SQL.CHAINER.PACKAGEDATA", "Native")
    08/13/2014 20:26:10.853 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.853 Processing entry ("MICROSOFT.SQL.CHAINER.PRODUCT", "Native")
    08/13/2014 20:26:10.853 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.853 Processing entry ("MICROSOFT.NETENTERPRISESERVERS.EXCEPTIONMESSAGEBOX", "Native")
    08/13/2014 20:26:10.853 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.853 Processing entry ("LANDINGPAGE", "Native")
    08/13/2014 20:26:10.853 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.853 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SLPEXTENSION", "Native")
    08/13/2014 20:26:10.853 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.853 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.AGENTEXTENSION", "Native")
    08/13/2014 20:26:10.853 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.868 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.POWERSHELLEXTENSION", "Native")
    08/13/2014 20:26:10.868 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.868 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SSISEXTENSION", "Native")
    08/13/2014 20:26:10.868 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.868 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.ASEXTENSION", "Native")
    08/13/2014 20:26:10.868 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.868 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.REPL_CONFIGEXTENSION", "Native")
    08/13/2014 20:26:10.868 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.868 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.MANAGEMENTTOOLSEXTENSION", "Native")
    08/13/2014 20:26:10.868 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.868 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLSERVER_CONFIGEXTENSION", "Native")
    08/13/2014 20:26:10.868 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.868 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SNISERVERCONFIGEXT", "Native")
    08/13/2014 20:26:10.868 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.868 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLBROWSEREXTENSION", "Native")
    08/13/2014 20:26:10.868 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.868 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RSEXTENSION", "Native")
    08/13/2014 20:26:10.884 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.884 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.DMF", "Native")
    08/13/2014 20:26:10.884 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.884 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SMO", "Native")
    08/13/2014 20:26:10.884 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.884 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLENUM", "Native")
    08/13/2014 20:26:10.884 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.884 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.FULLTEXT_CONFIGEXTENSION", "Native")
    08/13/2014 20:26:10.884 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.884 Processing entry ("MICROSOFT.SQLSERVER.CHAINER.WORKFLOWDATA", "Native")
    08/13/2014 20:26:10.884 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.884 Processing entry ("SHELLOBJECTS", "Native")
    08/13/2014 20:26:10.884 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.884 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.UTILITYEXTENSION", "Native")
    08/13/2014 20:26:10.884 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.884 Processing entry ("MICROSOFT.SQLSERVER.SQM", "Native")
    08/13/2014 20:26:10.900 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.900 Processing entry ("MICROSOFT.DATAWAREHOUSE.SQM", "X86")
    08/13/2014 20:26:10.900 Processing entry ("FIXSQLREGISTRYKEY", "X86")
    08/13/2014 20:26:10.900 Processing entry ("FIXSQLREGISTRYKEY", "X64")
    08/13/2014 20:26:10.900 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.900 Processing entry ("FIXSQLREGISTRYKEY", "IA64")
    08/13/2014 20:26:10.900 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.900 Processing entry ("MICROSOFT.SQLSERVER.DIAGNOSTICS.CONFIGURATION.STRACE", "Native")
    08/13/2014 20:26:10.900 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.900 Processing entry ("MICROSOFT.SQLSERVER.CHAINER.SETUP.RESOURCES", "Native")
    08/13/2014 20:26:10.900 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.900 Processing entry ("MICROSOFT.SQLSERVER.CHAINER.INFRASTRUCTURE.RESOURCES", "Native")
    08/13/2014 20:26:10.900 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.900 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.BOOTSTRAPEXTENSION.RESOURCES", "Native")
    08/13/2014 20:26:10.900 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.900 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLCONFIGBASE.RESOURCES", "Native")
    08/13/2014 20:26:10.915 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.915 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SFC.RESOURCES", "Native")
    08/13/2014 20:26:10.915 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.915 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SETUPEXTENSION.RESOURCES", "Native")
    08/13/2014 20:26:10.915 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.915 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.MSIEXTENSION.RESOURCES", "Native")
    08/13/2014 20:26:10.915 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.915 Processing entry ("MICROSOFT.SQLSERVER.CHAINER.EXTENSIONCOMMON.RESOURCES", "Native")
    08/13/2014 20:26:10.915 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.915 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCO.RESOURCES", "Native")
    08/13/2014 20:26:10.915 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.915 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCOEXTENSION.RESOURCES", "Native")
    08/13/2014 20:26:10.915 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.915 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONFIGEXTENSION.RESOURCES", "Native")
    08/13/2014 20:26:10.915 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.915 Processing entry ("MICROSOFT.SQLSERVER.DISCOVERY.RESOURCES", "Native")
    08/13/2014 20:26:10.915 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.931 Processing entry ("MICROSOFT.SQLSERVER.CONNECTIONINFO.RESOURCES", "Native")
    08/13/2014 20:26:10.931 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.931 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.UIEXTENSION.RESOURCES", "Native")
    08/13/2014 20:26:10.931 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.931 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.WIZARDFRAMEWORK.RESOURCES", "Native")
    08/13/2014 20:26:10.931 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.931 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARDFRAMEWORK.RESOURCES", "Native")
    08/13/2014 20:26:10.931 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.931 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARD.RESOURCES", "Native")
    08/13/2014 20:26:10.931 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.931 Processing entry ("MICROSOFT.SQLSERVER.MANAGEMENT.CONTROLS.RESOURCES", "Native")
    08/13/2014 20:26:10.931 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.931 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RESOURCES", "Native")
    08/13/2014 20:26:10.931 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.931 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONNECTIONINFO.RESOURCES", "Native")
    08/13/2014 20:26:10.947 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.947 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RULESENGINEEXTENSION.RESOURCES", "Native")
    08/13/2014 20:26:10.947 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.947 Processing entry ("LANDINGPAGE.RESOURCES", "Native")
    08/13/2014 20:26:10.947 Required security code group nodes exist, contine.
    08/13/2014 20:26:10.962 Saved .Net security policy file
    08/13/2014 20:26:10.962 Attempting to determine security.config file path
    08/13/2014 20:26:10.962 Checking to see if policy file exists
    08/13/2014 20:26:10.962 .Net security policy file does exist
    08/13/2014 20:26:10.962 Attempting to load .Net security policy file
    08/13/2014 20:26:10.962 Processing entry ("MSVCM80", "Native")
    08/13/2014 20:26:10.962 Processing entry ("MICROSOFT.SQLSERVER.CHAINER.SETUP", "Native")
    08/13/2014 20:26:10.962 Processing entry ("MICROSOFT.SQL.CHAINER.PACKAGE", "Native")
    08/13/2014 20:26:10.962 Processing entry ("MICROSOFT.SQLSERVER.CHAINER.INFRASTRUCTURE", "Native")
    08/13/2014 20:26:10.962 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.BOOTSTRAPEXTENSION", "Native")
    08/13/2014 20:26:10.962 Processing entry ("MICROSOFT.SQLSERVER.SETUP.CHAINER.WORKFLOW", "Native")
    08/13/2014 20:26:10.962 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLCONFIGBASE", "Native")
    08/13/2014 20:26:10.962 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SFC", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SETUPEXTENSION", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.MSIEXTENSION", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.CHAINER.EXTENSIONCOMMON", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCO", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCOEXTENSION", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONFIGEXTENSION", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.DISCOVERY", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.UIEXTENSION", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SSTRING", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.WIZARDFRAMEWORK", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARDFRAMEWORK", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARD", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.MANAGEMENT.CONTROLS", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONNECTIONINFO", "Native")
    08/13/2014 20:26:10.978 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RULESENGINEEXTENSION", "Native")
    08/13/2014 20:26:10.993 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CLUSTER", "Native")
    08/13/2014 20:26:10.993 Processing entry ("MICROSOFT.SQLSERVER.INTEROP.MSCLUSTERLIB", "Native")
    08/13/2014 20:26:10.993 Processing entry ("MICROSOFT.SQL.CHAINER.PACKAGEDATA", "Native")
    08/13/2014 20:26:10.993 Processing entry ("MICROSOFT.SQL.CHAINER.PRODUCT", "Native")
    08/13/2014 20:26:10.993 Processing entry ("MICROSOFT.NETENTERPRISESERVERS.EXCEPTIONMESSAGEBOX", "Native")
    08/13/2014 20:26:10.993 Processing entry ("LANDINGPAGE", "Native")
    08/13/2014 20:26:10.993 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SLPEXTENSION", "Native")
    08/13/2014 20:26:10.993 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.AGENTEXTENSION", "Native")
    08/13/2014 20:26:10.993 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.POWERSHELLEXTENSION", "Native")
    08/13/2014 20:26:10.993 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SSISEXTENSION", "Native")
    08/13/2014 20:26:10.993 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.ASEXTENSION", "Native")
    08/13/2014 20:26:10.993 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.REPL_CONFIGEXTENSION", "Native")
    08/13/2014 20:26:10.993 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.MANAGEMENTTOOLSEXTENSION", "Native")
    08/13/2014 20:26:10.993 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLSERVER_CONFIGEXTENSION", "Native")
    08/13/2014 20:26:10.993 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SNISERVERCONFIGEXT", "Native")
    08/13/2014 20:26:11.009 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLBROWSEREXTENSION", "Native")
    08/13/2014 20:26:11.009 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RSEXTENSION", "Native")
    08/13/2014 20:26:11.009 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.DMF", "Native")
    08/13/2014 20:26:11.009 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SMO", "Native")
    08/13/2014 20:26:11.009 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLENUM", "Native")
    08/13/2014 20:26:11.009 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.FULLTEXT_CONFIGEXTENSION", "Native")
    08/13/2014 20:26:11.009 Processing entry ("MICROSOFT.SQLSERVER.CHAINER.WORKFLOWDATA", "Native")
    08/13/2014 20:26:11.009 Processing entry ("SHELLOBJECTS", "Native")
    08/13/2014 20:26:11.009 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.UTILITYEXTENSION", "Native")
    08/13/2014 20:26:11.009 Processing entry ("MICROSOFT.SQLSERVER.SQM", "Native")
    08/13/2014 20:26:11.009 Processing entry ("MICROSOFT.DATAWAREHOUSE.SQM", "X86")
    08/13/2014 20:26:11.009 Required security code group nodes exist, contine.
    08/13/2014 20:26:11.009 Processing entry ("FIXSQLREGISTRYKEY", "X86")
    08/13/2014 20:26:11.009 Required security code group nodes exist, contine.
    08/13/2014 20:26:11.009 Processing entry ("FIXSQLREGISTRYKEY", "X64")
    08/13/2014 20:26:11.025 Processing entry ("FIXSQLREGISTRYKEY", "IA64")
    08/13/2014 20:26:11.025 Processing entry ("MICROSOFT.SQLSERVER.DIAGNOSTICS.CONFIGURATION.STRACE", "Native")
    08/13/2014 20:26:11.025 Processing entry ("MICROSOFT.SQLSERVER.CHAINER.SETUP.RESOURCES", "Native")
    08/13/2014 20:26:11.025 Processing entry ("MICROSOFT.SQLSERVER.CHAINER.INFRASTRUCTURE.RESOURCES", "Native")
    08/13/2014 20:26:11.025 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.BOOTSTRAPEXTENSION.RESOURCES", "Native")
    08/13/2014 20:26:11.025 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLCONFIGBASE.RESOURCES", "Native")
    08/13/2014 20:26:11.025 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SFC.RESOURCES", "Native")
    08/13/2014 20:26:11.025 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SETUPEXTENSION.RESOURCES", "Native")
    08/13/2014 20:26:11.025 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.MSIEXTENSION.RESOURCES", "Native")
    08/13/2014 20:26:11.025 Processing entry ("MICROSOFT.SQLSERVER.CHAINER.EXTENSIONCOMMON.RESOURCES", "Native")
    08/13/2014 20:26:11.025 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCO.RESOURCES", "Native")
    08/13/2014 20:26:11.025 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCOEXTENSION.RESOURCES", "Native")
    08/13/2014 20:26:11.025 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONFIGEXTENSION.RESOURCES", "Native")
    08/13/2014 20:26:11.025 Processing entry ("MICROSOFT.SQLSERVER.DISCOVERY.RESOURCES", "Native")
    08/13/2014 20:26:11.025 Processing entry ("MICROSOFT.SQLSERVER.CONNECTIONINFO.RESOURCES", "Native")
    08/13/2014 20:26:11.040 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.UIEXTENSION.RESOURCES", "Native")
    08/13/2014 20:26:11.040 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.WIZARDFRAMEWORK.RESOURCES", "Native")
    08/13/2014 20:26:11.040 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARDFRAMEWORK.RESOURCES", "Native")
    08/13/2014 20:26:11.040 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARD.RESOURCES", "Native")
    08/13/2014 20:26:11.040 Processing entry ("MICROSOFT.SQLSERVER.MANAGEMENT.CONTROLS.RESOURCES", "Native")
    08/13/2014 20:26:11.040 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RESOURCES", "Native")
    08/13/2014 20:26:11.040 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONNECTIONINFO.RESOURCES", "Native")
    08/13/2014 20:26:11.040 Processing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RULESENGINEEXTENSION.RESOURCES", "Native")
    08/13/2014 20:26:11.040 Processing entry ("LANDINGPAGE.RESOURCES", "Native")
    08/13/2014 20:26:11.056 Saved .Net security policy file
    08/13/2014 20:26:11.072 Strong name verification disabling is not required
    08/13/2014 20:26:11.072 /? or /HELP or /ACTION=HELP specified: false
    08/13/2014 20:26:11.072 Help display: false
    08/13/2014 20:26:11.072 Attempting to launch landing page workflow
    08/13/2014 20:26:11.072 Attempting to set setup mutex
    08/13/2014 20:26:11.072 Setup mutex has been set
    08/13/2014 20:26:11.072 Attempting to launch global rules workflow
    08/13/2014 20:26:11.072 Media source: C:\Users\ercklentzn\Desktop\SQL Server 2008 Ent Ed R2\
    08/13/2014 20:26:11.072 Install media path: C:\Users\ercklentzn\Desktop\SQL Server 2008 Ent Ed R2\x64\setup\
    08/13/2014 20:26:11.072 Media layout: Full
    08/13/2014 20:26:11.072 Attempting to get execution timestamp
    08/13/2014 20:26:11.087 Timestamp: 20140813_202610
    08/13/2014 20:26:11.087 Attempting to run workflow RUNRULES /RULES=GlobalRules
    08/13/2014 20:26:11.087 Attempting to launch process C:\Users\ercklentzn\Desktop\SQL Server 2008 Ent Ed R2\x64\setup100.exe
    08/13/2014 20:26:29.898 Process returned exit code: 0x00000000
    08/13/2014 20:26:29.898 Workflow RUNRULES /RULES=GlobalRules returned exit code: 0x00000000
    08/13/2014 20:26:29.898 Attempting to launch component update workflow
    08/13/2014 20:26:29.914 Media source: C:\Users\ercklentzn\Desktop\SQL Server 2008 Ent Ed R2\
    08/13/2014 20:26:29.914 Install media path: C:\Users\ercklentzn\Desktop\SQL Server 2008 Ent Ed R2\x64\setup\
    08/13/2014 20:26:29.914 Media layout: Full
    08/13/2014 20:26:29.914 Attempting to get execution timestamp
    08/13/2014 20:26:29.914 Timestamp: 20140813_202610
    08/13/2014 20:26:29.914 Attempting to run workflow COMPONENTUPDATE
    08/13/2014 20:26:29.914 Attempting to launch process C:\Users\ercklentzn\Desktop\SQL Server 2008 Ent Ed R2\x64\setup100.exe
    08/13/2014 20:27:16.396 Process returned exit code: 0x84BC0057
    08/13/2014 20:27:16.396 Workflow COMPONENTUPDATE returned exit code: 0x84BC0057
    08/13/2014 20:27:16.396 Attempting to determine security.config file path
    08/13/2014 20:27:16.396 Attempting to load .Net security policy file
    08/13/2014 20:27:16.396 Attempting to remove .Net security code group node
    08/13/2014 20:27:16.411 Removing entry ("MSVCM80", "Native")
    08/13/2014 20:27:16.411 Removing entry ("MICROSOFT.SQLSERVER.CHAINER.SETUP", "Native")
    08/13/2014 20:27:16.411 Removing entry ("MICROSOFT.SQL.CHAINER.PACKAGE", "Native")
    08/13/2014 20:27:16.411 Removing entry ("MICROSOFT.SQLSERVER.CHAINER.INFRASTRUCTURE", "Native")
    08/13/2014 20:27:16.411 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.BOOTSTRAPEXTENSION", "Native")
    08/13/2014 20:27:16.411 Removing entry ("MICROSOFT.SQLSERVER.SETUP.CHAINER.WORKFLOW", "Native")
    08/13/2014 20:27:16.411 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLCONFIGBASE", "Native")
    08/13/2014 20:27:16.411 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SFC", "Native")
    08/13/2014 20:27:16.411 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SETUPEXTENSION", "Native")
    08/13/2014 20:27:16.411 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.MSIEXTENSION", "Native")
    08/13/2014 20:27:16.411 Removing entry ("MICROSOFT.SQLSERVER.CHAINER.EXTENSIONCOMMON", "Native")
    08/13/2014 20:27:16.411 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCO", "Native")
    08/13/2014 20:27:16.411 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCOEXTENSION", "Native")
    08/13/2014 20:27:16.411 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONFIGEXTENSION", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.SQLSERVER.DISCOVERY", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.UIEXTENSION", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SSTRING", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.WIZARDFRAMEWORK", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARDFRAMEWORK", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARD", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.SQLSERVER.MANAGEMENT.CONTROLS", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONNECTIONINFO", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RULESENGINEEXTENSION", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CLUSTER", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.SQLSERVER.INTEROP.MSCLUSTERLIB", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.SQL.CHAINER.PACKAGEDATA", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.SQL.CHAINER.PRODUCT", "Native")
    08/13/2014 20:27:16.427 Removing entry ("MICROSOFT.NETENTERPRISESERVERS.EXCEPTIONMESSAGEBOX", "Native")
    08/13/2014 20:27:16.442 Removing entry ("LANDINGPAGE", "Native")
    08/13/2014 20:27:16.442 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SLPEXTENSION", "Native")
    08/13/2014 20:27:16.442 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.AGENTEXTENSION", "Native")
    08/13/2014 20:27:16.442 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.POWERSHELLEXTENSION", "Native")
    08/13/2014 20:27:16.442 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SSISEXTENSION", "Native")
    08/13/2014 20:27:16.442 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.ASEXTENSION", "Native")
    08/13/2014 20:27:16.442 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.REPL_CONFIGEXTENSION", "Native")
    08/13/2014 20:27:16.442 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.MANAGEMENTTOOLSEXTENSION", "Native")
    08/13/2014 20:27:16.442 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLSERVER_CONFIGEXTENSION", "Native")
    08/13/2014 20:27:16.442 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SNISERVERCONFIGEXT", "Native")
    08/13/2014 20:27:16.442 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLBROWSEREXTENSION", "Native")
    08/13/2014 20:27:16.442 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RSEXTENSION", "Native")
    08/13/2014 20:27:16.458 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.DMF", "Native")
    08/13/2014 20:27:16.458 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SMO", "Native")
    08/13/2014 20:27:16.458 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLENUM", "Native")
    08/13/2014 20:27:16.458 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.FULLTEXT_CONFIGEXTENSION", "Native")
    08/13/2014 20:27:16.458 Removing entry ("MICROSOFT.SQLSERVER.CHAINER.WORKFLOWDATA", "Native")
    08/13/2014 20:27:16.458 Removing entry ("SHELLOBJECTS", "Native")
    08/13/2014 20:27:16.458 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.UTILITYEXTENSION", "Native")
    08/13/2014 20:27:16.458 Removing entry ("MICROSOFT.SQLSERVER.SQM", "Native")
    08/13/2014 20:27:16.458 Removing entry ("MICROSOFT.DATAWAREHOUSE.SQM", "X86")
    08/13/2014 20:27:16.458 Removing entry ("FIXSQLREGISTRYKEY", "X86")
    08/13/2014 20:27:16.458 Removing entry ("FIXSQLREGISTRYKEY", "X64")
    08/13/2014 20:27:16.458 Removing entry ("FIXSQLREGISTRYKEY", "IA64")
    08/13/2014 20:27:16.474 Removing entry ("MICROSOFT.SQLSERVER.DIAGNOSTICS.CONFIGURATION.STRACE", "Native")
    08/13/2014 20:27:16.474 Removing entry ("MICROSOFT.SQLSERVER.CHAINER.SETUP.RESOURCES", "Native")
    08/13/2014 20:27:16.474 Removing entry ("MICROSOFT.SQLSERVER.CHAINER.INFRASTRUCTURE.RESOURCES", "Native")
    08/13/2014 20:27:16.474 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.BOOTSTRAPEXTENSION.RESOURCES", "Native")
    08/13/2014 20:27:16.474 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLCONFIGBASE.RESOURCES", "Native")
    08/13/2014 20:27:16.474 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SFC.RESOURCES", "Native")
    08/13/2014 20:27:16.474 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SETUPEXTENSION.RESOURCES", "Native")
    08/13/2014 20:27:16.474 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.MSIEXTENSION.RESOURCES", "Native")
    08/13/2014 20:27:16.474 Removing entry ("MICROSOFT.SQLSERVER.CHAINER.EXTENSIONCOMMON.RESOURCES", "Native")
    08/13/2014 20:27:16.474 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCO.RESOURCES", "Native")
    08/13/2014 20:27:16.489 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCOEXTENSION.RESOURCES", "Native")
    08/13/2014 20:27:16.489 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONFIGEXTENSION.RESOURCES", "Native")
    08/13/2014 20:27:16.489 Removing entry ("MICROSOFT.SQLSERVER.DISCOVERY.RESOURCES", "Native")
    08/13/2014 20:27:16.489 Removing entry ("MICROSOFT.SQLSERVER.CONNECTIONINFO.RESOURCES", "Native")
    08/13/2014 20:27:16.489 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.UIEXTENSION.RESOURCES", "Native")
    08/13/2014 20:27:16.489 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.WIZARDFRAMEWORK.RESOURCES", "Native")
    08/13/2014 20:27:16.489 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARDFRAMEWORK.RESOURCES", "Native")
    08/13/2014 20:27:16.489 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARD.RESOURCES", "Native")
    08/13/2014 20:27:16.489 Removing entry ("MICROSOFT.SQLSERVER.MANAGEMENT.CONTROLS.RESOURCES", "Native")
    08/13/2014 20:27:16.489 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RESOURCES", "Native")
    08/13/2014 20:27:16.505 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONNECTIONINFO.RESOURCES", "Native")
    08/13/2014 20:27:16.505 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RULESENGINEEXTENSION.RESOURCES", "Native")
    08/13/2014 20:27:16.505 Removing entry ("LANDINGPAGE.RESOURCES", "Native")
    08/13/2014 20:27:16.521 Saved .Net security policy file
    08/13/2014 20:27:16.521 Attempting to determine security.config file path
    08/13/2014 20:27:16.521 Attempting to load .Net security policy file
    08/13/2014 20:27:16.521 Attempting to remove .Net security code group node
    08/13/2014 20:27:16.521 Removing entry ("MSVCM80", "Native")
    08/13/2014 20:27:16.521 Removing entry ("MICROSOFT.SQLSERVER.CHAINER.SETUP", "Native")
    08/13/2014 20:27:16.521 Removing entry ("MICROSOFT.SQL.CHAINER.PACKAGE", "Native")
    08/13/2014 20:27:16.521 Removing entry ("MICROSOFT.SQLSERVER.CHAINER.INFRASTRUCTURE", "Native")
    08/13/2014 20:27:16.521 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.BOOTSTRAPEXTENSION", "Native")
    08/13/2014 20:27:16.536 Removing entry ("MICROSOFT.SQLSERVER.SETUP.CHAINER.WORKFLOW", "Native")
    08/13/2014 20:27:16.536 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLCONFIGBASE", "Native")
    08/13/2014 20:27:16.536 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SFC", "Native")
    08/13/2014 20:27:16.536 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SETUPEXTENSION", "Native")
    08/13/2014 20:27:16.536 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.MSIEXTENSION", "Native")
    08/13/2014 20:27:16.536 Removing entry ("MICROSOFT.SQLSERVER.CHAINER.EXTENSIONCOMMON", "Native")
    08/13/2014 20:27:16.536 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCO", "Native")
    08/13/2014 20:27:16.536 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCOEXTENSION", "Native")
    08/13/2014 20:27:16.536 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONFIGEXTENSION", "Native")
    08/13/2014 20:27:16.536 Removing entry ("MICROSOFT.SQLSERVER.DISCOVERY", "Native")
    08/13/2014 20:27:16.536 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.UIEXTENSION", "Native")
    08/13/2014 20:27:16.552 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SSTRING", "Native")
    08/13/2014 20:27:16.552 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.WIZARDFRAMEWORK", "Native")
    08/13/2014 20:27:16.552 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARDFRAMEWORK", "Native")
    08/13/2014 20:27:16.552 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARD", "Native")
    08/13/2014 20:27:16.552 Removing entry ("MICROSOFT.SQLSERVER.MANAGEMENT.CONTROLS", "Native")
    08/13/2014 20:27:16.552 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION", "Native")
    08/13/2014 20:27:16.552 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONNECTIONINFO", "Native")
    08/13/2014 20:27:16.552 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RULESENGINEEXTENSION", "Native")
    08/13/2014 20:27:16.552 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CLUSTER", "Native")
    08/13/2014 20:27:16.552 Removing entry ("MICROSOFT.SQLSERVER.INTEROP.MSCLUSTERLIB", "Native")
    08/13/2014 20:27:16.552 Removing entry ("MICROSOFT.SQL.CHAINER.PACKAGEDATA", "Native")
    08/13/2014 20:27:16.552 Removing entry ("MICROSOFT.SQL.CHAINER.PRODUCT", "Native")
    08/13/2014 20:27:16.552 Removing entry ("MICROSOFT.NETENTERPRISESERVERS.EXCEPTIONMESSAGEBOX", "Native")
    08/13/2014 20:27:16.552 Removing entry ("LANDINGPAGE", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SLPEXTENSION", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.AGENTEXTENSION", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.POWERSHELLEXTENSION", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SSISEXTENSION", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.ASEXTENSION", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.REPL_CONFIGEXTENSION", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.MANAGEMENTTOOLSEXTENSION", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLSERVER_CONFIGEXTENSION", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SNISERVERCONFIGEXT", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLBROWSEREXTENSION", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RSEXTENSION", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.DMF", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SMO", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLENUM", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.FULLTEXT_CONFIGEXTENSION", "Native")
    08/13/2014 20:27:16.567 Removing entry ("MICROSOFT.SQLSERVER.CHAINER.WORKFLOWDATA", "Native")
    08/13/2014 20:27:16.583 Removing entry ("SHELLOBJECTS", "Native")
    08/13/2014 20:27:16.583 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.UTILITYEXTENSION", "Native")
    08/13/2014 20:27:16.583 Removing entry ("MICROSOFT.SQLSERVER.SQM", "Native")
    08/13/2014 20:27:16.583 Removing entry ("MICROSOFT.DATAWAREHOUSE.SQM", "X86")
    08/13/2014 20:27:16.583 Removing entry ("FIXSQLREGISTRYKEY", "X86")
    08/13/2014 20:27:16.583 Removing entry ("FIXSQLREGISTRYKEY", "X64")
    08/13/2014 20:27:16.583 Removing entry ("FIXSQLREGISTRYKEY", "IA64")
    08/13/2014 20:27:16.583 Removing entry ("MICROSOFT.SQLSERVER.DIAGNOSTICS.CONFIGURATION.STRACE", "Native")
    08/13/2014 20:27:16.583 Removing entry ("MICROSOFT.SQLSERVER.CHAINER.SETUP.RESOURCES", "Native")
    08/13/2014 20:27:16.583 Removing entry ("MICROSOFT.SQLSERVER.CHAINER.INFRASTRUCTURE.RESOURCES", "Native")
    08/13/2014 20:27:16.583 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.BOOTSTRAPEXTENSION.RESOURCES", "Native")
    08/13/2014 20:27:16.583 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SQLCONFIGBASE.RESOURCES", "Native")
    08/13/2014 20:27:16.583 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SFC.RESOURCES", "Native")
    08/13/2014 20:27:16.583 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SETUPEXTENSION.RESOURCES", "Native")
    08/13/2014 20:27:16.583 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.MSIEXTENSION.RESOURCES", "Native")
    08/13/2014 20:27:16.599 Removing entry ("MICROSOFT.SQLSERVER.CHAINER.EXTENSIONCOMMON.RESOURCES", "Native")
    08/13/2014 20:27:16.599 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCO.RESOURCES", "Native")
    08/13/2014 20:27:16.599 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.SCOEXTENSION.RESOURCES", "Native")
    08/13/2014 20:27:16.599 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONFIGEXTENSION.RESOURCES", "Native")
    08/13/2014 20:27:16.599 Removing entry ("MICROSOFT.SQLSERVER.DISCOVERY.RESOURCES", "Native")
    08/13/2014 20:27:16.599 Removing entry ("MICROSOFT.SQLSERVER.CONNECTIONINFO.RESOURCES", "Native")
    08/13/2014 20:27:16.599 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.UIEXTENSION.RESOURCES", "Native")
    08/13/2014 20:27:16.599 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.WIZARDFRAMEWORK.RESOURCES", "Native")
    08/13/2014 20:27:16.599 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARDFRAMEWORK.RESOURCES", "Native")
    08/13/2014 20:27:16.599 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.INSTALLWIZARD.RESOURCES", "Native")
    08/13/2014 20:27:16.599 Removing entry ("MICROSOFT.SQLSERVER.MANAGEMENT.CONTROLS.RESOURCES", "Native")
    08/13/2014 20:27:16.599 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RESOURCES", "Native")
    08/13/2014 20:27:16.599 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.CONNECTIONINFO.RESOURCES", "Native")
    08/13/2014 20:27:16.599 Removing entry ("MICROSOFT.SQLSERVER.CONFIGURATION.RULESENGINEEXTENSION.RESOURCES", "Native")
    08/13/2014 20:27:16.614 Removing entry ("LANDINGPAGE.RESOURCES", "Native")
    08/13/2014 20:27:16.614 Saved .Net security policy file
    08/13/2014 20:27:16.614 Attempting to release setup mutex
    08/13/2014 20:27:16.614 Setup mutex has been released
    08/13/2014 20:27:16.614 Setup closed with exit code: 0x84C40013
    08/13/2014 20:27:16.614 ======================================================================
    Any help troubleshotting this installation would be appreciated. I did try runnnig Setup as administrator and tried copying the install files to the root directory.
    Thanks a lot,
    Nick

    This  error code "0x84C40013" may be caused by permission issue when you perform an unattended install. Did you run the setup.exe with "Run As a Administrator" ?
    Check this below link and try if this works... http://basitaalishan.com/2012/08/02/unattended-sql-server-2012-installs/
    Raju Rasagounder Sr MSSQL DBA

  • Build an application installer and include files referenced in the code

    I want to make an application installer of my project, and I need to include a picture that I'm using in the code.
    This picture is used both in the vision assistant and in a low level color pattern match.
    What I need is some way to reference this picture in my code, so that when I create the installer and the project is installed on another computer, this file will always get referenced.
    Can someone please tell me how to do this?
    Thanks in advance!

    Your installer should be putting everything in the data folder you need.  So it should be fine.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • [Solved] installation and setup question - gummiboot and EFI

    Hi,
    This is the first time i'm installing arch. i hit the below issues. hope someone can help me out. my understanding of uefi is just about an hour worth of reading or less..
    (the wiki didn't mention the kernel requirement when I started installing it... now it does and i updated the beginner's guide wiki post.)
    Problem
    Gummiboot#Installing says that "If you are still running kernel 3.7 or have not booted in EFI mode, creating the boot entry will fail. You should however still be able to boot gummiboot as it copies the binary to the default EFI binary location on your ESP (/boot/EFI/BOOT/BOOTX64.EFI on x64 systems). "
    the gummiboot part fails. gummiboot gives this error at install  saying file system is not FAT EFI, so first I got gummiboot and gummiboot-efi both using pacman. then, I provided the --path to install and now it coughs up because the latest iso isn't 3.8 yet.
    Failed to access EFI variables. Is the "efivarfs" filesystem mounted?
    I can see efivars but this is asking for efivarfs.
    so instead I did,
    # cp /usr/lib/gummiboot/gummibootx64.efi /boot/efi/EFI/gummiboot/gummiboot.efi
    # efibootmgr -c -d /dev/sda -p 1 -w -L "Gummiboot" -l '\EFI\gummiboot\gummiboot.efi'
    how do I set this up? I'm afraid if I overwrite /boot/efi/EFI/BOOT/BOOTX64.EFI  windows might not boot.
    after the installation (of course without gummiboot stuff) now when I reboot, I don't see any gummiboot menu at all because i didn't copy it to EFI/BOOT. it goes straight to windows 8 boot. during boot if I press F12 and see the menu option on thinkpad, I see gummiboot as the first entry(must be because of efibootmgr) followed by windows boot manager. When I select the gummiboot and enter, it just circles back to the same menu. I have setup the loader.conf and arch.conf as described in the wiki.
    how do I set gummiboot to work? i dont mind pressing F12 and then going to gumiboot-> arch until 3.8 is out.
    If this isn't possible, can I install rEFInd without messing gummiboot? looking at the dir structure of FAT EFI I think it should be possible but not 100% sure until i try it out. Also, to get rid of gummiboot, i should delete the directories, uninstall using pacman and get rid of the efibootmgr change I made, right?
    Last edited by lobo2 (2013-03-15 04:07:47)

    srs5694 wrote:
    sidneyk wrote:Maybe not, I use rEFInd and mount ESP on /boot/efi and copy over updated kernels and initramfs. Maybe if you are mounting ESP at /boot the kernel and initramfs get written to both places at once, I don't know. I also don't know if /boot is where gummiboot expects them to be.
    I realize this has been at least partially addressed by others, but I want to make two points very explicit:
    In Linux, partitions (or more precisely, the filesystems that most of them contain) are accessed by mounting them at a mount point (a directory). Thus, when you mount the ESP at /boot, the contents of /boot are the ESP. Put another way, mounting the ESP at /boot means that to read or write the ESP, you read or write files and directories under /boot. You can test this yourself by mounting and unmounting a partition that's not basic to the minute-to-minute functioning of the computer. The ESP will actually work fine for this. Unmount it from /boot or /boot/efi and then issue a mount command to mount it elsewhere (say, "mount /dev/sda1 /mnt"). Then check the files under your temporary mount point, and even copy a file there. You can then unmount it and mount it back where you normally do and look for the file you copied -- it should be there. Play with this until you fully grok it.
    Gummiboot runs before Linux, and it has no conception of Linux mount points. Thus, whether you mount the ESP at /boot, at /boot/efi, at /home/fred/abadmountpointforanesp is irrelevant, so long as the files on the ESP are laid out in the way that gummiboot expects. The trickiest aspect of this for those unfamiliar with the Linux mount system is that you do not include the Linux mount point in filename references for pre-boot programs like gummiboot. That is, if you mount the ESP at /boot and place the kernel at /boot/vmlinuz, then in gummiboot, the kernel would be \vmlinuz.
    Yeah, I figured this out based on the OP's response to that and thinking it through, I just never really thought about it much before now. But I will argue that the mount point /boot and the EFI partition are indeed 2 different locations. I know that once the ESP is mounted at /boot that this distinction disappears until it is umounted and something written to /boot, but while mounted as such, /boot and ESP are virtually the same, at least to the Linux system. I realize the EFI programs are ran before any OS and therefore don't really care about any OS specifics.
    I wonder if the OP has confused the info between gummiboot and rEFInd (possibly from the Beginners Guide) because to me, after reading the gummiboot wiki, it just seems that it would be much simpler to just give gummiboot what it wants, i.e. ESP mounted at /boot, whether it's a separate partion or not. I'll have to take a look again at the Beginners Guide to see again the order of things there, but if it isn't, maybe it should be having the user ensure that pacman has completely updated the new system and then go on to the boot loader specifics. I was just thinking though, that the way the install medium is now, that it was automatically pulling the latest stuff down as part of the install process. I know it's not pulling testing or multilib without user intervention, but the core, stable stuff it is. That seems to be part of the confusion here maybe, 2 different versions of gummiboot with gummiboot changing some things between the 2 and maybe the kernels, too.
    [EDIT] I took another look at the Beginner's Guide and it says that most users will probably want to use the [core], [extra], and [community] repos, which are enabled by default. It goes on to recommend that [multilib] be enabled for users wanting to run 32 bit programs and then reminds you to run #pacman -Sy to update the package lists, but not #pacman -Syu which would apply any changes from the repos since starting the install. Shouldn't matter much, even if the [multilib] repo was enabled because at that point no 32 bit libs have been installed, but it would matter if a user decided to enable the testing repos.
    I wouldn't ordinarily recommend it, but in this case, if the OP is comfortable with the risk, then it might be useful to, at least temporarily, enable the [testing] repo and do #pacman -Syu to pull in the 3.8 kernel. Note that this is likely to also pull in other packages from [testing], but if you haven't installed X yet or any desktop environment, then what is pulled in shouldn't be too overwhelming. He can then immediately go back and disable [testing] if desired. I'm currently using testing without any issues, but there are risks to doing so.
    Last edited by sidneyk (2013-03-14 18:13:43)

  • VS_Community installation and setup

    When trying to install VS_Community, all I get is "Setup detected an issue during the operation.  Click below...".  Does anyone have a solution for this problem?

    How are you installing from the ISO? Burn to DVD, mount on virtual optical drive (which software), or extract files to HD and install from there?
    If you are using VOD software, some is problematical. I suggest you try alternatives.
    http://blogs.technet.com/b/odsupport/archive/2011/04/19/how-to-extract-the-contents-from-an-iso-file-without-burning-the-iso-to-disc.aspx
    "Extract the .ISO files to your hard drive.        
    Contents of .ISO image files can be accessed directly using third-party tools that allow file extraction from the file to a temporary folder on your hard drive (similar to .zip files). As with the virtual drive, this approach is advisable to install application
    software or system upgrades. An example of this approach is the creation of an installation thumb drive to install software on netbooks or other devices with no optical drive.        
    The following tools offer .ISO file support:        
    IsoBuster
    CDmage
    Daemon Tools
    Winrar
    Note: While other products may work to manipulate .ISO files, they have not been tested and are not recommended by Microsoft."

  • Didnt Find Acrobat SDK 9.1 Installer or setup file when Downloaded Acrobat  SDK 9.1

    Hi I have downloaded Acorbat SDK 9.1 from the following link http://www.adobe.com/devnet/acrobat/?view=downloads.
    I  got the "sdk91_v2_win.zip" file . When i extracted files i didint find  any setup or installer All it contains is "ActionScriptReport ,  Documentation,  IntAppCommunicationSupport,Javascriptsupport,NonAdobeSupport,OtherSup  port,PluginSupport" folders. I have attached the image below.
    Regards
    Santosh

    There is a setup.exe in Adobe\Acrobat 9 SDK\Version1\PluginSupport\Tools\Visual Studio App Wizard

  • Reversing iFolder installation and copying files back

    We have a client that is very upset with the poorly written iFolder client. They have 500 iFolders, which is apparently way more than iFolder was intended for.
    Anyway, they wish to move all their files back to the file system.
    The ifolder server is running on a SLES 10 OES2 server. They do not have any one workstation with a copy of all the iFolders--though I instructed them to work on that in case I couldn't come up with a better way.
    From listing the simias/data directory on the server, I can see that the file names and sub-folder names are in tact. However, instead of the top-level iFolder name, there appears to be a guid of some sort.
    Does anyone know of a utility to do this?
    TIA,
    Dan

    Originally Posted by datakey
    We have a client that is very upset with the poorly written iFolder client. They have 500 iFolders, which is apparently way more than iFolder was intended for.
    Anyway, they wish to move all their files back to the file system.
    The ifolder server is running on a SLES 10 OES2 server. They do not have any one workstation with a copy of all the iFolders--though I instructed them to work on that in case I couldn't come up with a better way.
    From listing the simias/data directory on the server, I can see that the file names and sub-folder names are in tact. However, instead of the top-level iFolder name, there appears to be a guid of some sort.
    Does anyone know of a utility to do this?
    TIA,
    Dan
    Hi Dan,
    Please specify which sp version of OES2 and if it's patched to the latest versions.
    Also;
    the output of 'rpm -qa|grep ifolder'
    & knowing which version of the iFolder client they are using along with the desktop OS version would be good!
    btw.. no utility I know of to 'pluck' the iFolder data folder and get it back in folder hierarchy.
    Using the client is the proper way AFAIK.
    -Willem

  • SiteMinder installation and setup guide

    I want to know the procedure and order to be followed for setting up and configure SiteMinder 6.0.

    Hi,
    I might have misunderstood your question but IF you are actually wondering:
    "Is there anything special I need to do after installing the Sun Directory Server to use it as my ldap DS?"
    Then my answer is:
    Nope! You just need to specify the port on which your Sun DS happens to be running on your machine during the SiteMinder installation...and voila it will store its config data on it!
    In case you want appropriate instructions on how to install Siteminder itself...shouldn't there be a docs folder with plenty of installation pdf's included in the Siteminder 6.0 cd that you bought?
    Cheers,
    - Pulkit

  • Practice installation and setup

    Hi
    We have 3 ESXi servers in production, running all our servers as vm's.
    It so happens, I now have a couple of servers (64 bit capable) and a storage-unit available. (turned off, not in production)
    Is it safe (not interfering with production) and OK (not violating license agreement) to install a ESXi, 60 days trial, on these servers for test/educaton while they are connected to the same LAN as the production envirionment?
    (vm's will be run on a closed network on the test environment)
    Thanks!

    Hi,
    that's absolutely OK.
    For more info see:
    http://www.vmware.com/download/eula/eval_eula.html
    Regards,
    P.

  • I need to re-install the file Installer and diskimagemounter

    I would appreciate if some body out there will advise me on how do I reinstall the Installer and Diskimagemounter files?

    How Restore Deleted or Missing OS X Components
    A few of the basic OS X installed applications can be restored from the Optional Installs installer located in the Optional installs folder on your Installer DVD.  However, if what you need is not there then follow the instructions below.
    How to Use Pacifist to Restore Deleted or Missing OS X Components
    Insert the OS X Installer DVD into the optical drive.  Use a simple utility like TinkerTool to toggle invisibility so you can see invisible items.  Alternatively, open the Terminal application in your Utilities folder and at the prompt enter the following:
    defaults write com.apple.finder AppleShowAllFiles Yes
    Press RETURN.
    To turn off the display of invisible files repeat the above command substituting No for Yes.
    The install packages are located in the /System/Installation/ folder on the DVD.
    Download the shareware utility Pacifist. Use it to extract a fresh copy of the missing item(s) from the file archives on your OS X installation DVD. The file archives are in the /System/Installations/ folder (use Go to Folder option in the Go menu of the Finder.)
    Here are Four Basic ways to use Pacifist (courtesy of George Orville.)
    Drag a .pkg icon onto the Pacifist window .....proceed to step 7.
    Click on “Open Package ....” and navigate to package desired and click “Open” in the open/save window.....proceed to step 7.
    Insert Mac OS X installer CD and when it mounts, navigate to .... Menu->Go->Go to Folder. In the path field enter or paste ....
    /Volumes/disc name/System/Installation/Packages (where disc name is the name of the CD/DVD that you inserted.)
    Click on the  "Go" button ..... • Drag a .pkg to Pacifist..... proceed to step 7.
    The package you'll need will have to be discovered by trial and error, but for most applications you should start with the Essentials.pkg and/or Additional Essentials.pkg.
    D. Insert your Mac OS X install disk 1 .... and open Pacifist.
    1.          In Pacifist, select "Open Mac OS X Install Packages" ... dialog may appear asking for disk 2, then disk 3 and finally disk 1 again.... {if DVD is not used)...If “Stop Loading” is selected...the procedure will stop!!!
    2a. When loading is complete, a new window appears, click the triangle to display contents of each package...Select item and proceed to step 7.
    2b.          or click the “Find” icon in the Pacifist window and type the name of the software you need.
    3.          In the list that comes back, click the top most entry for the item that you want. ..... that is the one for the English language.
    4.          On the top of the Pacifist window, click “verify” .... you will probably be prompted for your password.
    5.          Enter checks for.... “verify permissions” and “verify file contents.” and click “verify” ....enter password when prompted.... you will get back output which may look like this:
              20 files were scanned. 20 of 20 files were present on the hard disk. 0 of 20 files had file permissions that did not match those specified in the package. 0 of 20 files had checksums that did not match those specified in the package.
    6.          Click “close”. Go to step 7.
    Extract or Install........
    7.          In the Toolbar (upper left), you now have the option to extract or install. Click a file in the lower list and those two icons will be enabled.
    8.          If “Extract to...” is selected.... navigate to the location where the file will be placed, select “choose”, select “extract” in new dialog that appears,authenicate , if prompted, click “OK”.
    9.          In the next dialog, click “Extract”.
    10.          If “Install” is selected... dialog will appear with the location/path of the installed software. Click “Install”
    11.          Type in your password, click “OK”
    Pacifist will begin to extract files.
    12.          In steps 8/10ß.... you also have the choice to “cancel”
    Notes:          Pacifist may find that a file it is installing already exists on the hard disk. Pacifist will present you with an alert panel....
    Stop
    Leave original alone
    Update .....
    Default selection
    Replace .... (Replace option should only be used on full install packages)

  • The dock in Maverick is doing strange things to word and excel files

    For years (and Mac operating systems), I have kept Microsoft word and excel documents on my doc. I use these documents frequently...click on the file icon in the dock, it opens, I edit and save. Click on the icon again and the saved document opens. so simple.
    Since upgrading, I click on the icon, the file opens with a number following the file name (version number I assume) but before docx or xlsx. I edit and save, but get a "save as" box. Now I have to edit the file's name, find the original and replace the original with the new version. Not so simple.
    Since I open and close my daily billing log many times a day, this has slowed me down (and irritated me).
    I have had no other problems with my Maverick installation and these files are in Word and Excel 2008. This does not happen to powerpoint or any other file I tried so far.
    Any suggestions on how to solve this?

    Your Mac will generate a new .plist file automatically after restart.
    Deleting the .plist file shouldn't delete any app icons from the dock.
    Check the startup disk just in case.
    Launch Disk Utility located in HD > Applications > Utilities
    Select the startup disk on the left then select the First Aid tab.
    Click:  Verify Disk  (not Verify Disk Permissions)
    If DU reports errors, restart your Mac while holding down the Command + R keys.
    From there you can access the built-in utilities to repair the disk using OS X Recovery

  • Ovi store installation error message 'File not fou...

    I updated my firmware for E71. Afterwards when I install ovi store app, it stops during installation and shows File not found error message. Tried several times to reinstall, but same response. Please help.

    im having the same problem on my nokia e 71

Maybe you are looking for

  • Open item ( balance) can be find in upgrade from 4.7 to ECC 6

    Dear experts We are planning to upgrade our SAP system from 4.7 to ECC 6 One of my consultant told me that only open balance willbe moved ( customer /vendor open items) How can it be done for the  user if he want to see the details of cleared invoice

  • Maps on mavericks blank

    Having updated my Macbook Pro Retina to Mavericks, I find that the new Maps app is blank and not loading the maps, in either standard, hybrid or Satellite view. Various other users have reported changing the Language order solves this, but I only hav

  • Computer not communicating with devices

    I have a 27 inch late 09 imac. Just recently i set up the firewall and encrypt the files for the first time. Then I realized my printer was not connecting wirelessly to my mac. It worked when i plugged it directly to the mac. So I think i accidently

  • How can i sync 1080p hd movies on my ipad mini

    recently m buy a ipad mini ....n m like to see hd movies ....but i cant sync ? tell me how i sync movies in hd print

  • I can not edit the form that I am filling in

    I can not edit the form that I am filling out. I saved it to Desktop and was allowed to fill it in. But I can not erase some words that I want to change.