WVC54GC UK Download firmware 1.21 is in German. Help!

Hi,
I just bought some software to view my camera on my phone and although my WVC200 cameras work fine, the WVC54GC reports incompatible so I went to this Linksys website and downloaded the latest firmware available to the UK which is 1.21
Firmware loaded fine but I now find that language is set to German!
There seems to be no way to set the language in the device so I used the Live Chat facility and explained my problem to "Princess" who was totally unable to help but gave me a support phone number to call at 10 pence per minute.
I called the number and was told that 1.21 was the latest version available to me and that if I reset the camera the language should reset to English.
Of course it didn't, and examining the UK downloaded firmware file I see that the filename contains a nice big "DE" which means it is German.
This is supposed to be Cisco for goodness sakes. And people ask me why I sopped selling Cisco equipment 2 years ago!
Can anyone help me with this? I'd love a link to an English version of 1.25 but all I can find by Googling downloads is 1.26 (available only to the USA for some reason) which apparently would mean I have to change my PC software and I don't hold up much hope for that. It would probably end up being in Swahili or Chinese or something else I cannot read!
Version 1.25 would mean I can at least burn the firmware and use it with my existing viewer software but I can't find anywhere to download it. I can't revert to my previous version because I don't have the .bin file and anyway the support person told me that you cannot load earlier versions of the firmware. Great!
Any help appreciated.
Thanks
David

I just checked the UK page and found out that there are two versions for firmware 1.21. The one below (1.83 MB) is the English version of the firmware and the one on top is German. Try if you can upgrade the firmware using the English version (the 1.83 MB) and see if that will work for you. I checked the release notes for the 1.83 MB and that is how I found it out.
http://support.linksys.com/en-eu/support/cameras/WVC54GC
Linksys, A Division of Cisco Systems, Inc.
Product:                WVC54GC v1.1 (ETSI version, RoHS compliant)
Classification:         Firmware Release History
Release Date:           7/07/06
Last Firmware Version:    V1.21, Jul 7, 2006
Version v1.21, Jul 7, 2006
- Initial Release
Firmware Upgrade instructions:
- Download the zip file and extract the firmware file to your local PC. Make sure to remember it's location.
- Go to the WebUI of the camera (default IP: 192.168.1.115)
- Click "Setup" and login as administrator (default user name: admin / default password: admin)
- Click "Administrator" tab. Then click "Upgrade Firmware" Button
- Browse to the firmware file you downloaded and click "Start Upgrade"
- Wait until the whole procedure is complete. Do not interrupt process!

Similar Messages

After downloading firmware for airport utility, airport express base station no longer registers with airport utility on my Mac. Now the base station is blinking amber with no info of what is causing all this to happen. Any suggestions?

After downloading firmware for airport utility last night, airport express base station was deleted from airport utility and only Time Capsule remains. When I plug in the base station, an amber light blinks without being able to verify the cause. Any suggestions to remedy this problem?

There are only a couple of things you can do to resuscitate a nonresponsive Express:
"Hard reset":
Press and hold the reset button with a pen or pencil until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
If that does not work,
"Factory defaults reset":
Unplug the Express from power.
Press and hold the reset button with a pen or pencil, then plug the Express back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
Release the button.
In either case you will have to reconfigure the Express as a new device. A moment or two after it has been reset, the LED should be blinking slowly. It must then appear in your Wi-Fi menu like this:
Earlier versions of OS X will report it as "Apple Network nnnnnn".
In either case, select it, and then launch AirPort Utility.
If it does no appear in your Wi-Fi menu after it has been reset using one of the two techniques above, it is defective. Other than attempting another reset, there is nothing you can do.

My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?"

My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.

Hello buddyacw
You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Link to download firmware s

I understand i need to download these softwares before i can update my at&t Lumia 1520 to denim. Is there a link to download firmware : 02061.00074.14273.33019 and firmware 1028.3562.1407.1001
Solved!
Go to Solution.

taritera wrote:
my phone has never been updated and i understand updating is cumulative, that is i need to update with the older firmwares before I finally udtate with denim
That is absolute nonsense, you will get directly the latest available firmware available for your handset. If you do it OTA and some other firmware bits are required for the latest one to install, they will get installed automatically before the latest firmware is applied. You will only observe several updates happening one after the other without any input required from you. If you use the tool via PC, it will wipe your phone and install directly the latest firmware.

Magsafe won't charge, MacBook won't download firmware

I'm hoping someone might have some insight into this problem I'm having. Like many others, I bought a new Magsafe power adapter for my MacBook, and it doesn't work. It does work when I turn off the computer, remove the battery, and then restart the computer, so I know it's not an issue with the adapter itself. I also tried downloading the SMC firmware update v1.4, but my computer tells me I don't need this update, even though my computer only has v1.2. Is there any way I can force my computer to download the newer version?
Can anyone help me?
Thanks in advance,
Casey

The correct chargers for the Mac portables are: http://support.apple.com/kb/HT2346
Using a charger that is too low on power should not damage the MacBook, just not charge it very well. That looks like the battery is healthy enough, but if the charger is attached, either the connector is not making electrical contact or the charger itself is faulty.
It would be a good idea to try another, appropriate, charger or take it to an Apple store genius bar where they can test and tell where the fault is.

When updating iphone firmware to 5.1 on my phone it says error downloading firmware, When updating iphone firmware to 5.1 on my phone it says error downloading firmware

When im trying to update my iphone 4 from 5.0.1 to 5.1 via wireless network (straight from my phone) it downloads the 5.1 firmware almost to the end and then it says problem downloading firmware, and i dont have my computer right now so it would ve really nice to update straight from my phone. If someone have had same problems or knows how to get it work please tell me i'd appreciate it, thanks !

Hello UKFan643,
It sounds like you are seeing more data being used on your iPhone than you expect. Sometimes other data is being used by information like contacts, calendars, the iOS software installed on your device, settings, and other system resources. I recommend reviewing the following articles to learn more about storage capacity on your iPhone:
Understanding capacity on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1867
How OS X and iOS report storage capacity
http://support.apple.com/kb/TS2419
If you are still seeing more "other" data than expected, it may be that the iPhone was disconnected during syncing:
In the case of iOS device becoming physically disconnected in the middle of syncing music, podcasts, videos or photos, it's possible that orphaned files will be left on the iOS device. This can prevent iTunes from syncing the iOS device on subsequent sync sessions.
One symptom of this issue will be displayed in iTunes where the Capacity indicator for the iOS device will report a large amount of "Other" disk usage for the device. To resolve this issue:
You can find more information and steps to resolve this issue at the following link:
iOS: 'Not enough free space' alert when trying to sync
http://support.apple.com/kb/TS1503
Thank you for using Apple Support Communities.
Best,
Sheila M.

Error 9006 while downloading Firmware 2.2

I get the "Error 9006" while downloading 2.2 firmware, it can stop at 20mb or 200mb. Never been able to complete the download. I am using Windows XP.
This is exactly the same problem when I tried to dwl firmware 2.1, in the end I had to find the firmware file myself.
Can anyone help? Or locate the firmware file?

hey, here is something that should help
With your internet connected go to tools
-go all the way down to internet options
-click on the security tab-go to custom level
there will be a list there enable anything that has to do with downloading
-right below the list it says reset custom settings
-in the drop down menu change it to Medium-low
then click reset. When you are done click on apply, this might take a miute. When it is done. Click Ok
If this doesn't work you can email me at [email protected]
-Hope it helps

Is there a way to download firmware from a Labview GUI to an Actel FPGA or a ARM Processor?

I dont know if it is possible but i have a couple of test that need to be done where multiple firmware is requiered to be downloaded to the pcb. So everytime i need to go and open Flash Pro(microsemi) and download firmware to the Actel FPGA and then go back to labview. I wonder if there is a way to do that from my labview Vi so that firmware will download automatically?
thanks
Solved!
Go to Solution.

You should be able to make TCL scripts inside of your Flash Pro software. They have a macro generator that will just mimic what you do. Save off that TCL file. You can then load Flash Pro using the System Exec with a parameter pointing to that script file. Flash Pro will then run that script and close when done.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Call TCL Script.png ‏20 KB

Can't download firmware

Everytime I try to download firmware for my WRT54G (wireless) router, I receive this error message, i.e.
"Internet Explorer cannot download...v6_1.02.7.011_EN_20090727.bin from downloads linksysbycisco.com [line space] Internet Explorer was not able to open this internet site. The requested site is either unavailable or cannot be found. Please try again later. [OK]"
I've been trying for the past three days and recieved the same error message each time. I doubt that the site is "unavailable or cannot be found." If those are the reasons, is there another way to update my firmware? What's the problem?
Bottom line: I want to update my firmware.
Respectfully,
Mordido
Message Edited by Mordido on 11-15-2009 08:48 PM
G.W.P. Sr.

Try thyis link to upgrade the firmware of the router ....
Hope it helps ....

Download Firmware 2.1 gets Error 9006

I have been trying to download Firmware 2.1 and after around 20mb or so, i get an error prompting Error 9006.
I use iTunes 8.0.1.11. I tried with iphone connected and without connected to PC. I tried both the options of Download & Install, and Download Only. Still does not work.
Anyone can help?

You can directly download the needed file via this link and save it to your computer:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/061-5202.2 0080909.gkbEj/iPhone1,12.1_5F136Restore.ipsw
Down load an save somewhere and remember where you saved it.
Then, press and hold the Option key on Mac or Shift key on Windows, and then click on Restore button in Tunes under iPhone tab. Then select the downloaded .ipsw file to install to iPhone.

Stuck downloading firmware

My HTC Rhyme phone has been trying to download software from Verizon for about a week now. There has been an arrow in my status bar saying "Downloading Firmware" that won't go away. It is stuck at a little less than halfway finished. I am on wifi. I have restarted my phone numerous times and tried dialing *228 with no success. The battery is not removable. Please help!

Hi verizonadia,
Let's see what's causing the problem! Have you recently downloaded any new applications? Please advise your current software version:http://vz.to/yIYT0E ?
Ayani_VZW
Please follow us on twitter @VZWSupport

Is there tool to download firmware updates from cisco site?

I need a tool which can tell if there is a newer version of the firmware available for USC servers. The tool should be able to run on Linux servers.
If the tool can download firmware that's like cherry on the cake.

Hi deshaw,
You may check the Support and Downloads (http://cs.co/9000c2sw). An active Smartnet contract agreement is needed for you to download/upgrade firmwares. Feel free to message me for further assistance. Hope this helps! :)
Thanks,
Angela ([email protected])

Download firmware

Hi All,
I'm trying to download firmware for my 1252 access point. When I browse to the proper location (http://www.cisco.com/cisco/software/type.html?mdfid=281235915&flowid=6779), there are two choices (IOS software and Lightweight IOS software). However, neither of them works.
When I attempt to download the IOS software, it tells me "To Download this software, you must have a valid service contract associated to your Cisco.com user ID."
When I attemtp to download the Lightweight software, it tells me "The download process was interrupted. Please refresh the page (Windows -press F5, Mac -press Command-R) or restart the download process. If you continue to see this message, contact Cisco support at [email protected]"
How does one download firmware?
Thanks - Joe

Leo,
I want the Light Weight software. It's kind of a long story. We aquired a company and they had a couple of these AP's. They sent them to us once we aquired them, but we couldnt get into them (I wasnt really involved at this point). So one of my guys found the Autonomous software online (not sure how he did that) and was able to load it onto the device. But now we've learned a litte bit more and realized we want it to be a light weight device because the company we aquired also has a 4402 controller. So now I'm trying to go back to Light Weight.
No, I dont have a service contract and I've learned that is the issue.
Any ideas?
Thanks - Joe

Problems downloading firmware to Zen Vision:M... PLEASE HE

?I have had 3 different Creative products, and they all have left me unsatisfied. The first Creative player that I owned was a Christmas gift from my parents, it was a Zen Micro. I believe I got it in 2005. I loved this music player. It was easy to use, and the sound quality was excellent. In 2006, I purchased a Zen Vision:M. My only complaint was that the screen scratched very easily, but that problem was easily prevented with a screen cover. However, it began to delete my music, over 800 songs at a time. And, however hard I tried I could not get it to cooperate with my new Windows Vista computer. I am quite young, and have no knowledge of computers (although I am a master at PowerPoint), so all of the helpful tips provided here on the message boards are/were of no help to me. So now, my "baby" is sitting in its box waiting to be fixed.
After my new player (Zen Vision:M) crashed, I went back to using my Zen Micro about 2 weeks ago. Within the past week, it has started to freeze up when I turn it off and I have to resort to taking out the battery, and I am always afraid that I will lose songs when it re-builds the library. Just now I plugged it in to my Windows XP machine, because I cannot get it to work on my Windows Vista, and it wasn't recognized so I had to take out the battery and try it again. Luckily it worked... but I still do not know what to do. Creative is only going to fix my player, and this is of no help to me because I will not be able to download all of my songs I had on it before.
Being a teenager, music is my life, and my mp3 is the air I breathe. ( I am not that weird, I am just using this point to emphasize my problems.) I am so frustrated with these products that I am about to just give up on them all together. So... this "life history" ends with my true question. I know that there are zillions of posts on this message board dealing with the same issue, but how exactly do I get my Zen Vision:M recognized on my Windows Vista computer? I am willing to try to fix this problem on my own, one last time, but first I have to get my player recognized by my computer. I erased the firmware, which was what I was told to do by other owners of Creative products, ( I have no idea what?firmware is anyway ), and my Window's XP and Window's Vista machines would not recognize it so I could download the new firmware. Maybe there is an easy solution to this problem... but I need help. Once I accomplish this, I will no longer need to use my Zen Micro, so I will no longer have a problem with that device. Help me please. I need easy steps, because like I said, I am not computer savvy.

Arty wrote:
Hi! I just bought my Zen Vision: M and tried to install the new firmware. I keep receiving an error message: "Your player is not connected, please connect your player." I know my player is connected and Zen Vision: M Media Explorer recognizes it. Is there any way for me to install the new firmware? Please help...
can someone please advise me on an issue i have, i bought my M at christmas from Singapore and works well until i installed the new downloaded firmware , it continued for a week then the other day when i plugged it in it was not recognized and the player frooze and had to be reset to turn it off.
I have tried reinstalling the firmware ( original) but nothing , i even formated the player but of course now there is no content and the player is not recognized.
Any help will be appreiciated,
Regards Kennz.

Downloading firmware 20.

I've tried to download firmware 20.for my N95 but every time i install it,it never goes further than 13.The reason i want to upgrade to 20 is so i can download the Ngage trial games.If anyone outthere can help i would appriciate the help,thanks.

fphillips wrote:
Try femon -H -a0 while trying to add card in mythtv-setup. Explanation here: http://code.mythtv.org/trac/ticket/10830#comment:7
It seems to affect dvb usb devices. I didn't see any evidence of this patch http://patchwork.linuxtv.org/patch/13563/ in current kernels, but it may have been rewritten. I haven't had to change my card setup and don't have usb tuners, so I haven't hit this problem.
Edit: Found it, ha, just went out yesterday, will be in 3.9: (search for Juergen) http://patchwork.linuxtv.org/patch/16925/
That worked great.
I did stumble upon the femon thing at some point but I didn't see any explanation for it and all my googling for femon resulted in a plugin for VDR which totally had me stumped. After your post a tried a slightly different google string and found it was in the linuxtv-dvb-apps package. In hindsight a "pacman -Qo femon" would have given me the answer...
Thanks for your efforts fphillips.

WVC54GC UK Download firmware 1.21 is in German. Help!

Similar Messages

Maybe you are looking for