WVC54GCA - blue led not working

Blue led is not working on my camera. I did enable/disable led and also reset the camera but it seems that the blue led is dead!
Anybody had the same problem?
Thanks

Try to upgrade/flash the Camera's Firmware, reset and then re-configure your Camera...
Download Firmware 2.75 MB...
After Upgrading the Firmware you should reset the Camera to factory settings and then re-configure the Camera from scratch...Hope this works...

Similar Messages

Compaq Presario F767NR caps lock,scroll,touch pad blue light not working

Hi,
I have a Compaq Presario F767NR. It downgrade it to xp. All my drivers are ok. But caps lock,scroll,touch pad blue light not working though its function is ok.
I think led is ok. I find that for the scroll lock when i press fn+num lk then the blue light works fine.

I have the same problem and I think it started when I downloaded the SP2 for the Windows Vista. So probably it is not a problem of the laptop. I have an HP Pavilion dv9500 notebook PC.
Message Edited by Yannis1980 on 10-13-2009 12:09 PM
Message Edited by Yannis1980 on 10-13-2009 12:09 PM

Hp pavilion 15 e025sl mute led not working with latest audio driver (rollback solve)

Hi,
i'm here for a segnalation, i have this hp and after update audio driver (suggested by hp update software) mute led stop working, the button work and mute the audio but led not work (f6 button led).
Affected driver problem is "realtek high definition audio" version 6.0.1.7010, i opened hp recovery manager and restored driver 6.0.1.6856 after this, the led is back and working fine.
Please, fix that problmem in the next update, for the moment i ignore request update for audio driver from hp support assistant.
Thanks

thank you for your response, I made this topic so that it may be useful to other users with the same problem, now I will contact the support hp.

Dv6 power led not working

Hi everybody!
Today, I changed the fan in my Pavilion dv6-6001eh (the original stop working). After I assembly, the power led not working anymore. I check the cable, but that's ok. Otherwise the power button working. The second power led in the right side next to USB, also not working.
Why? Maybe pressed hotkey?
Thank you.

Any advice?

Why light led not work???

Hey, wondering why the light led not working on Htc one m7??? i tried everything like reset factory etc.. STILL SAME.. Ugh.... Anyone know how to force it to work????

ajnevares3
THANK YOU FOR TRYING HELP ME WITH UR INFORMATION.... I WENT AHEAD DO WHAT YOU EXPLAINED..
IT WORKED ON MY HTC ONE M7!!!!!!!!!! THE LIGHT LED IS WORKING NOW.. BECAUSE OF YOU, YOU RE BEST!!!!
THANK YOU SO MUCH!!!!

[nForce] msi k7n2delta ilsr hdd led not work

hi guys, well there is not much to say only that my hdd led not work, rarely i put attention on it, but just when i see... is gone... sniiiff.. i tryed change the led, invert cables, and the raid controller has nothing to do with this issue, sometime ago i have power issues, and during those times the led suddenly "wake up" , then i change the psu, and hdd, now i have sata hdd, and somebody told me the led not work with the 3· ide or sata, culd be the data cable
thanks

"...yes yes i know that, right now using sata i know the hdd led not work, but when i-m using ide drive either, thas wy i saying may be the ide cable.thanks..." That's not what you said in your first post. IF IDE HDD works (even if HDD led doesn't work) then IDE cable should be OK. Perhaps HDD light case/mobo connection has a problem.

Caps lock/scroll lock/num lock/ LEDs not working - instead pop-ups in bottom RH corner of screen

Specific details; p/n: GS066PA#ABG, 4 GBytes DDR2 RAM, OS Windows 7 (6.1) Ultimate Edition 64-bit Service Pack 1 (Build 7601) DirectX 11.0. LED's were working but during one of the windows automatic updates they stopped working. I don't know which update. Now I get little pop-ups "CAPS LOCK: ON" etc (black text on white background). If I rename bttray.exe to bttray1.exe and restart the laptop, that kills the pop-ups in the bottom RH corner of the screen but it does not restore the operation of my blue indicator LED's. Can anyone help please?

Hi @haggis1 ,
I saw your post regarding the problems with the pop-ups and LED lights not working after a Windows Update. Most likely there was a problem with the update when it was installed. This Microsoft Support link will show you how to uninstall an update. Try uninstalling the most recent updates and the restart the notebook and see if the LEDs start working again.
If that fixes the issue then there is another section in that link entitled: I remove an update but it gets automatically installed. That will show you how to hide an update.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

HP Photosmart C6200 Series Blue Inks Not Working

Hi all,
I have an HP Photosmart c6200 series printer and the blue ink cartridges are not working. I've read similar problems about black ink cartridges, but on different printers so I am looking for some help here.
All of my ink cartridges recently expired, so I went to a professional store and had them emptied and refilled. I put all of the ink cartridges back in the printer and did a test - I noticed the blue inks were not working. From there, I have tried removing them/reinserting them, looking for visible chunks and running printhead cleans from the printer. So far nothing is working.
I've printed out a diagnostics page and the boxes that should have the blue inks show up completely empty, not just streaky. I have followed all instructions from the diagnostics page.
If anyone has any suggestions they would be greatly appreciated. I do not think my printer is under warranty anymore.

Hi JessicaBruzzese,
I understand you have a Photosmart C6200 printer that is not printing any blue after refilling the cartridges. I'm sorry to hear this, but I will do my best to help.
It sounds to me like the refilled ink may not be able to make it out of the cartridge. I will suggest that you plug the printer directly to a wall outlet and follow this Missing, Faded, or Dull Colors document. If it's still not working after that, you can also try cleaning the cartridge contacts.
If the blue continues not to print, you may have to purchase another HP cartridge.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

1142 APs LEDs not working in normal operation

Hi guys,
just installed 6 new APs to a client remote site off a 5508 controller. 5508 is running 7.0.116
total of 78 installed APs, mostly 1142's with a dozen or so 1242s
All going perfectly until I was about to leave site and noticed two of the APs had no LEDs lit.
Checked in the controller, as I had renamed them so knew they were on the system, and they are both there. Connected to each of them and was successful and everything seemed ok - no blue LED though. Rebooted them and the LEDs work as expected during the boot process but as soon as they have entered normal operation the LEDs go dark.
I have seen the following:
https://supportforums.cisco.com/thread/2177779
and
https://supportforums.cisco.com/thread/2186453
but no reports of it with anything other than 3502's...
Change process is galacial and heavily monitored so dont want to invoke it if it wont address the concern...
Any ideas will be gratefully accepted.

Hi Scott, and thanks for the reply,
So, the APs are getting a disable command from the controller at boot?
I just cant see why these two in particular should exhibit behaviour different to the others deployed, and it must be something to do with their interaction with the controller as the LEDs work correctly until after they become operational...
I am trying to understand what makes these two so special? Boss has said that they should be RMA'd as faulty without an adequate explanation for the peculiar behaviour...

Apple numeric keypad keyboard caps LED not working...

Hi,
I am using numeric keypad(wired one) with my iMac, suddenly, when i switched on the machine in evening and tried tap the CAPS key and it doesn't light up but the caps lock is working perfectly fine.
I saw many posts regarding this on Apple discussions, but, none of them has worked for me.
Sometimes, i use this keyboard with Windows 7 also it is not working for that too. I tried with many other PCs including Windows or Mac but, didn't worked.
I discovered that Apple is providing protection against accidently CAPS lock with new manufactured keyboards, i bought my iMac 15 days back.
My entire work in on Mac and on the application i used to work on, i need to enter the password at almost 4 locations and with out knowing that CAPS lock is on or off, really taking a lot of time.
Can any body suggest that the problem is with the LED Bulb or what? or this a manufacturing fault? or i need to go for a new keyboard?
Your comments are really appreciated in this regard.
Regards,
MacLover

Hi, my first suspect would be a bad Keyboard.
Open System Preferences>Keyboard>Modifier keys, is Caps Lock set to No Action?
Open Keyboard Veiwer in Sys Prefs>International or Languages, do the letters switch to upper case when Caps Lock is pressed?

Satellite L750/05q - Wireless LED not working

Have an L750/05q running Win 7 64bit.
Wireless works fine but the Wifi led not lighting up when wireless activated, only the bluetooth indicator led comes on when Bluetooth on, Wifi on or both on.
Updated from toshiba site to latest Toshiba listed Atherios driver - 9.2.0.316 (my model is not listed on their AU support site), but still no led. Wireless works fine.
Also updated the LAN driver (Realtek) too,
Am wondering if this is just a failure in hardware rather than the driver.
Any ideas? Thanks.

Thanks Akuma and MisterX. On reading your replies I went back and read the manual more 'carefully'; I had interpreted wireless WAN as internet but it most likely refers to a GPS card function which is not installed in this model. Thanks for taking the time to reply and put my mind at ease.
Cheers :)

HD led not working on K7N2-L ?

Just got this board a week ago.
instaloled evrything fine and installed xp with probs but one thing i noticed was the hd led would only light up when i first turn the comp on and also when readying from a cdrom but will not work when its only reading from the hd i have tried turning the connector round and putting it on that way but then it does not work al together is there a way to get it to work when it should ( when the hd is reading or writing).
Or is there another conector that u can connect it to that i don't know about ?
Thanks
Steve :]

yep shure does if i put a cd in it lights up when registering ti and also when transfering files but wont light up when copying files from hd to hd or when windows is loading only time it lights up aoart from the cdrom thing is when i first boot the computer.
seems weared to me, also while i'm typeoing this and when i'm doing anything apart from installing or copying files from a cdrom the hd light flashes once ever second.
anyone got any ideas apart from the hd led being possesed:D lol
Thanks
Steve

Led not working on iphone 5s and 5c

my iphone 5s and 5c LED flash not working inspite that we have activated it on settings. our version was already 8.2. Please help.

The LED flash alert only works when your phone is locked or asleep.
Is that the problem your having since you didn't state it?

Blue Yeti not working on Mavericks

Is there any help to get the blue yeti microphone working?
Mavericks doesn't recognize the microphone.
Help.

Hey ther Tim,
It sounds like after having updated to Mac OS X 10.9, you are no longer able to use your USB microphone.
I found this article for you to help troubleshoot what may be happening, named:
OS X Mavericks: Check your device’s USB connection
http://support.apple.com/kb/PH14144
If a USB device isn’t working properly, it might not be properly connected to your computer.
If your computer has more than one USB port, switch the device’s cable to another port. If you still can’t use the device, contact the manufacturer for more information.If you can use the device after switching ports, connect another device to the first port. If you can’t use this device, shut down the computer and unplug it from the power outlet. Wait about a minute, then plug it into the power outlet and start up your computer. If you still can’t use a device with the port, your computer may need to be serviced.Find out how to service or repair your Mac
If the device is connected to a USB hub, make sure the device and the hub are the same speed. For example, connect a USB 2.0 Hi-Speed device to a USB 2.0 Hi-Speed hub.
If more than one device is connected to the USB port, disconnect all other devices. Connect a keyboard and mouse to another USB port. Do not use USB hubs or extension cords.If you can use your device now, there may be a problem with one of the other devices. Try reconnecting the other devices, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps.
Thank you for using Apple Support Communities.
Regards,
Sterling

Lumia 1020 flash and LED not working

Both flash and LED stoped working on my Lumia 1020. I tried: soft reboot, hard reboot, different camera apps (and settings) and a app to use the phone as a flash light: no result.
It worked untill yesterday. Camera is working fine, but without LED and flash.
Suggestions?

Having the same problem. Suddenly camera flash & led stopped working. Cannot afford hard reset due to much lost of data. Searched for solutions but could not found any. Also nobody seems to be interested to help out. Don't get any solution or answer by Nokia.

WVC54GCA - blue led not working

Similar Messages

Maybe you are looking for