WVC54GCA Camera - Looking for Firmware version 1.1.01

Does anyone have the file for firmware version 1.1.01? It is no longer available on the support downloads for some reason.

George919 wrote:
Not sure if your link is working correctly... I get a file named DYFF08-407-110002.bin which is about 4 Mb. I can't do anything with this file. Please help! Thanks.
Hello George919,
That’s the file name of the firmware. You can follow the steps on this article http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=2073c35c67fc47b8b57e9d336208ce1a_5645.xml&pid=80&r....
That will guide you on how to upgrade. I hope that really helps.

Similar Messages

Looking for firmware 1.00.06 for zen touch

Hi, I'm looking for firmware version .00.06 (especially the non-european version) to get rid of the broken EQ issue. My current version is .0.03. The only link for a download I've found is http://touch.evilmonkeh.co.uk/ and it seems to be broken.
Could anybody tell me where I can get it elsewhere? Might be of interest to others, too. If nobody can come up with an answer, maybe somebody's got it backed up on their comp and could send it to me?
Thanks a lot!

Finally found it. Has anybody downgraded from .0.03 to .00.06? Is there really a significant difference in the EQ?

Looking for older version of Itunes to run on Pentium(R) 4 CPU 2.6GHZ Windows XP

looking for older version of iTunes to run on Pentium(R) 4 CPU 2.6GHZ Windows XP

? Please read my original post again. Maybe how I said it was confusing but that is exactly how I checked it... in VISTA. Exactly the way the link you gave me described.
You do understand the message I am getting says: *itunes.exe has been set to run in compatibility mode for older version of windows. For best results, turn off compatibility mode for itunes before you open it.* I am interpreting this to mean that compatibility is set for something OTHER then VISTA since it it saying "for and older version of Windows".
When you tell me to "Check the compatibility mode in Vista not iTunes" what the heck do you even mean? How do you check compatibility in iTunes?
Thanks for trying to help, but not sure you read my post as I intended. I have seen one other post that mentioned the same problem, but that post never got a response that was helpful.
Thanks for trying. Later !
p.s. I still need help from someone.

Looking for firmware 7.1

I'm looking for firmware 7.1 for the Airport Extreme.
It seems that my networkproblems started when I updated my firmware...this is where it all goes wrong.
Trying to check out where the problem really lies I want to re-install firmware 7.1. Unfortunately I cant seem to find it in download anywhere. Does anyone know where I can download it (preferabely a link).
thanks
RRed

There's a great article I found on macfixit about how to do this- not sure if it works once the firmware is downloaded (trying now):
http://www.macfixit.com/article.php?story=20070612233454417

Looking for ANY version of RTS to download...

Looking for ANY version of RTS to download and I can't find it ANYWHERE. Can someone help????
Rob

935741 wrote:
I don't need just any version, but a RT java vm for desktop applications, such as the Java RTS platform.[url http://java.sun.com/javase/technologies/realtime/faq.jsp#8]We have no plans to support Windows XP or Vista at this time as real-time behavior is not well expressed in those systems.
So, if you want RT on a desktop, drop Windows and install Linux.
[url http://java.sun.com/javase/technologies/realtime/index.jsp#requirements]Java RTS Minimum Recommended System Requirements
Although I am not sure it will guarantee RT once you install a desktop on top of Linux.

Looking for software version 4.2.173 for my 8800

I have a software version 4.2.1.101 on my 8800. Its blutetooth version does not seem compatible with my car. i am looking for ways to download version 4.2.173 which is recommended by my car manufacturer. Can you point me to the right download URLsite? I do not seem to be able to find it.
Thks and Best Regards
Samy

A1367 indicates you have a 4G iPod. Those can go to iOS 6.1.6.
You can verify by see if the iPod has cameras, if yes it is a 4G
Connect the iPod to your computer and update via iTunes
iOS 4: Updating your device to iOS 5 or later
You need iTunes 10.7 or later on the computer

App is looking for old version of runtime engine

I have an app that came with a datalogger that was (presumably) written in Labview 7.X. Whe it runs, it wants me to point it to lvruntimeeng 7.1.1.
I have LV 8.2 already on the machine, and I can't find the file it's looking for.
I really need to use this datalogger.
Any ideas?

From what I can tell, the KB article is about "Executable Version (7.1.1) Doesn't Match Resource File (7.1) Check Your Configuration", while this thread is about the inability to install the 7.1.1 runtime if 8.2 is already installed on the same machine.
I don't think the KB applies in this case. Did you post the wrong link?
LabVIEW Champion . Do more with less code and in less time .

Looking for older version of skype

Hey There, the skype i have best expirienced with is the late 2012 version, i also have a windows 7. since oldapps doesnt work anymore and oldversion just wont download, thank you

RSGP wrote:
Hey,
I'm looking for an older version of skype (before the overhaul) as the ones after kept crashing my pc, constantly.
Tried to find one via web archive, but that didn't work.
Had issues with other ones I managed to download.
What is the most recent pre-overhaul download?
Please, run the DirectX diagnostics tool (do not press the Run 64-bit DxDiag button).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Looking for bios version 1.7 for K8N Neo4 FI - plz help, it's urgent

i bought myself a new K8N Neo4 FI yesterday together with a msi nx6600gt and an A64 3200+ Venice e6 and when i booted up the bios said i had 1gb of ram @ ddr266 in single channel mode. i tried to set it to 200mhz ddr but it wouldn't go so i installed win xp anyway and when i tried to run 3dmark i got artifacts all over. someone suggested that i downgrade to 1.8 so i did and my artifact probs went away so now i still have to deal with my memory and for that someone else suggested to me that i downgrade to 1.7 until the next bios comes out so i tried looking for version 1.7 and after about 4 hours of searching i still have nothing to show for it. can someone plz plz plz tell me where i can find it???

Not to mention if you're gonna buy a 2nd power supply, why not buy one good enough to feed all of that hardware. Good reliable brand name PSUs aren't as costly as some might think, it's actually a rather cheap price to pay for peace of mind.
As for knowing if it will solve your problem or not, we can't garantee, you might have more than one problem in your system. The PSU is definitely a problem, but there is no garantee everything will suddenly fall into place after you change it.

Looking for Firmware MBP91.00D3.B06

Hi,
I have a MacBook Pro with EFI MBP91.00D3.B02 which has an issue with Symantec PGP and won't boot after I have encrypted it. I have another Mac that it work perfectly on and it has EFI MBP91.00D3.B06 installed on it. There is a known issue with EFI MBP91.00D3.B02 so I am looking for a place to download EFI MBP91.00D3.B06, but it is not listed on the EFT page on Apples site. Please let me know if you have a copy or know where I can download it.
Thanks
Mike

Thanks Doug, that's helpful. In the instructions for Boot Camp it specifically says to check for, download and install the latest firmware before commencing an installation of Boot Camp. I always follow instructions!
It would be helpful if what you say was also on the Apple Support pages of the website, just to confirm to visitors there that things are correct. It really wouldn't hurt them to dot the "i"s and cross the "t"s to make sure there is no possibility of having to "guess" that because it isn't listed, you don't need it. I am sure lots of people have already downloaded the wrong type, judging from some of the many firmware questions on the site. Sometimes, a confirmation of reality is necessary, you know, like getting an aircraft ready for flight and going through a check list for every single thing.

FileSalvage - looking for older version

Does anyone have or know where I could find an older version of FileSalvage? I'm looking for version 3.0, in particular
There must be an old install somewhere around...
thx!

Try the forum for flash.

Vector smart objects still looking for older version of Illustrator

When we try to open smart objects from withing Photoshop CC, they're looking for Illustrator CS6. On machines where Illustrator CS6 is uninstalled we get errors. All the file associations in Bridge are correctly set. Is there a way to change the file associations for smart objects?
Thanks,
-Onur

Editing smart objectrs uses the system wide associations, not the ones from Bridge, so you need to adjust that for the *.ai file type.
Mylenium

In Need of Serious Help. Looking for Trial Versions of Dreamweaver CS3

Hello there,
What I thought was going to be super easy is turning into a
HUGE problem. I'm currently taking a Web Design course and we are
using Dreamweaver CS3. I have two assignments due on Wednesday. To
make a long story short, I'm desepartely looking for a 30 day trial
os Dreamweaver CS3 but I can't find one. Apparently Dreamweaver CS4
is coming out soon. Any ideas? I'm in a pickle.
Thank you!
Aly

And then spend a week using malware removers to remove
everything that you
unwittingly installed when you installed the 'dodgy copy'? No
thanks. And
what about the zombies that malware removers don't find? NO
THANKS.
Go to the bookstore, and find a DW CS3 book that contains a
demo on the CD
included. At least then you won't be loading your computer
with bad actors.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Dooza" <[email protected]> wrote in message
news:gd1jvt$1k$[email protected]..
> AlyCat25 wrote:
>> Hello there,
>> What I thought was going to be super easy is turning
into a HUGE
>> problem. I'm currently taking a Web Design course
and we are using
>> Dreamweaver CS3. I have two assignments due on
Wednesday. To make a long
>> story short, I'm desepartely looking for a 30 day
trial os Dreamweaver
>> CS3 but I can't find one. Apparently Dreamweaver CS4
is coming out soon.
>> Any ideas? I'm in a pickle.
>
> Hi Aly,
> The CS4 trial will be out approx. 2 weeks after CS4
ships, which is due
> end of October. This means you are looking at mid
November before the new
> Trial is available. This does put you in a pickle. My
only suggestion, as
> daft as it may seem, would be to try to find a dodgy
copy somewhere on the
> internet. I don't know where this would be, sorry.
>
> Dooza
>
> --
> Posting Guidelines
>
http://www.adobe.com/support/forums/guidelines.html
> How To Ask Smart Questions
>
http://www.catb.org/esr/faqs/smart-questions.html

VZAccess Manager install hangs looking for previous versions of software

UGH! Trying to install the VZAccess Manager for the UM175 USB modem. Driver installs but it gets to the point of the installation where the message box says "Checking for previous versions of VZAccess Manager..."
It just sits there and never goes away. FRUSTRATING!!!! The driver actually installs but the manager software never does. What gives?
Oh ya...Windows 7 is the OS

VZAccess Manager software must be installed before inserting the PC Card / USB Modem into the computer for the first time. Only after the software has been installed can Windows successfully install and configure the PC Card / USB Modem.
Start Device Manager.
Windows 7 Click Start > Control Panel > System and Security > Device Manager.
Click on the link below on using device manager.
http://support.vzw.com/clc/devices/knowledge_base.html?id=20416

Looking for Quicktime version 7.1.5?

I'm suffering the same frustrations with the Quicktime/iTunes issue. My iTunes was accidently deleted off my computer and I'm trying to reinstall everything again (iTunes, Quicktime, etc.) with many road blocks. I'm following advise posted to reinstall the earlier versions of everything, but I can not seem to find a download of the 7.1.5 version of Quicktime anywhere.
If anyone could find it in their hearts to help me, I would be appreciative!!! I'm just a girl from Texas trying get my husband to think I know what I'm doing! Ha!
Look forward to some help.
Thanks ya'll,
[email protected]

Taking what you have asked for at face value...
Apple have 7.2 here:
http://www.apple.com/support/downloads/quicktime72forwindows.html
Older versions of Quicktime can be found at fileHippo:
http://filehippo.com/downloadquicktimeplayer/

WVC54GCA Camera - Looking for Firmware version 1.1.01

Similar Messages

Maybe you are looking for